Acer laptop v3 571g won't turn on. How to factory reset your Acer Aspire V5 laptop

Acer notebooks have one great and convenient function for recovery, without using discs with a system image. The laptop data maker recorded a system recovery image that only takes a few gigabytes into a hidden partition on the hard drive.

To restore Windows 8 on laptop, you must turn off your PC and be sure to connect charger.

When turning on the laptop, as soon as the Acer logo appears, simultaneously press the Alt + F10 key combination, preferably several times at once.

Pressing these keys will launch a proprietary Windows 8 recovery program called Acer eRecovery Management. If this utility will not start, check the BIOS to see if the Disk-to-Disk (D2D) function is enabled. If eRecovery Management asks for a password, then try entering the standard AIM1R8, 000000 or 00000000. If you have problems accessing the utility, we recommend contacting the service.

After the utility has loaded, you need to select " Full recovery system factory settings ”, this option restores the system to the factory state. You should also pay attention to the presence of the restore function with saving custom files and data. But if you decide to use the second option, after viruses or unstable work, this will not help the system for a long time.

Now that you have decided on the recovery method, read the warning and click on the "Next" button.

The copy and restore process will begin system files... This procedure will take about 15 minutes. Wait for the end.

Then click "OK" button, the system will reboot.

After restarting the laptop, the program will start at the original.

Complete windows recovery 8 on an Acer laptop completed. Next, the desktop of the operating system will start and a window will appear at the bottom of the screen, where the process of installing the utilities will be shown and required drivers... Wait for the installation to complete. It will take about 20 minutes.

If during the installation of drivers and utilities prompts to restart the PC appear, select the "Restart later" item. Pre-installed antivirus program sometimes it will display a request to change the registry - agree.

At the end, the driver and software installation utility will delete all temporary files and reboot your laptop.

That's all! You have restored Windows 8 to your laptop from a hidden hard drive partition.

Reset random access memory laptop

If instead of an image on your laptop you see a black screen, only the indicators are on, and all attempts to turn on the device do not bring any result, check if the laptop has enough battery power. To do this, connect the charger and leave the laptop alone for about 30 minutes. Then try turning it on. If the problem persists, you can repair yourself in one of the following ways.

Method one - reset hardware settings

First of all, turn off the gadget, unplug it, then remove the power supply from it.

After that, we need to remove all residual charge and reset to initial level all hardware settings. We do this with the help of simple actions - we press the power button of the laptop and hold it for 25-30 seconds.

After that, you should insert the battery back into the laptop, connect the charger and, of course, turn on the laptop. After all this, you will only have to find and select from the proposed list the OS boot into normal mode... This procedure can be accomplished using the arrow keys (up and down).

Method two - dumping RAM

If the previous method did not help, turn off the laptop, remove the battery and charger from it. Turn the laptop over, find the cover on the back of the laptop, and remove it with a small screwdriver. The lid should only be in one copy, so it won't be difficult to find it.

Then, under the cover, find the RAM. It should look like the picture below. Carefully remove the RAM from its slot, without exerting undue physical impact on it.

Set the removed card aside. After 5 minutes, install the RAM, but in a different slot than the one from which it was removed. If there are several planks, just swap them.

Assemble the laptop and turn on the device.

If you are not ready for such a serious technical intervention, then it is better to entrust this work to the masters of acer laptop repair.

Method three - soft reset BIOS settings

If your laptop freezes on a black screen during the boot process, then we enter the BIOS menu. To do this, we find and press the F9 button during the reboot / start of the device (this may be another key, depending on the laptop model).

Well, then we need to find and activate the command “Return to factory settings. Please note: this option may have different names, depending only on the laptop model. Here are the naming options: Load BIOS Setup Defaults, Load Failsafe Default, or Load Safe-Fail Default.

Method four - hard reset BIOS settings

There is also hard reset BIOS ... What it is, how to correctly and safely carry out such a reset, read our blog.

If none of these methods helps to eliminate the problem, we advise you to contact service center to service Acer equipment, as the breakdown may be much more serious than you think.

We still hope we were able to help resolve your issue. We wish you good luck and smooth operation of your equipment!

Question: Acer aspire v3 571g won't turn on after cleaning

Acer Aspire v3 571g does not turn on after cleaning. The first time I disassembled it, everything worked. After repeated actions, the LED sensors stopped lighting and the laptop did not respond to the power button. When you press the power button or try to connect the adapter, it beeps motherboard that's all.

Answer: ruzalit, buddy ... have you even read the topic? LBP think too ...

Question: Acer Aspire ES17 laptop stuck on the Acer logo after restart

Acer Aspire ES17 laptop after a normal reboot hangs on the logo, does not respond to pressing the buttons to enter the BIOS, the cooler first turns when the power button is pressed, but after 1-2 seconds it stops. Disassembled laptop, HDD rustles when turned on (works). I tried to sequentially disconnect the keyboard, RAM, hDD, Wi-Fi controller (well, or whatever it is), even the cooler itself - the result is always the same, the logo hangs, except when I removed the RAM bar at all, it is alone and there is only one slot for it, I tried to change the RAM bar to the other, Esc, F1, F2, F8, F11, Alt + Ctrl + Del - tried to press and hold when turning on the laptop, the result is zero. I went through similar problems on the Internet, decided to reset the BIOS, the only button that I could find on the board with similar characteristics for resetting the BIOS, held it down for a couple of seconds and 30 seconds - it did not help. I took off the battery for autonomous work bios for 40+ minutes, also did not work. The head is already swelling. Help me please.

The file is attached to the message. Size - 146Kb

Answer:
And when the HDD is turned off, it also hangs on the logo? And nothing else writes and does not allow you to enter the BIOS settings?

Different combinations are used for acer, google and try, or even better, find in the instructions
Most likely Ctrl + Esc + F2
But maybe Ctrl + F2, and others.

IMHO Advanced SystemCare Free has jammed something there.

Question: Acer Aspire 5942G - Turns On And Then Turns Off

We have a laptop Acer aspire 5942g. I5 430m, 4gb memory, radeon 5650.
After three months of lying on the shelf, I decided to get it, but it turns out to be working at all.
It turns on, then turns off after 5 seconds. Shutdown is accompanied by a click of the hard, as far as I understand.
Then there is a cycle of endless five-second on / off switches, while on the monitor even the ice backlight does not work.
A couple of explanations: I tried it without a battery - the same thing. When turned on, the hard indicator lights up for a second. I sin on radeon, but what do you say?

Answer: board model?

Question: Acer Aspire 6935g turns on automatically when the adapter is connected

Acer Aspire 6935g ..... and then constantly shuts down by itself with reboot ...
in the safe mode it seems to hold on for now ...
in the process, I noticed that the calendar is in 2001 ... I'll try it and replace the battery ...
and then - boom to see ...
(I think I will need tips ...

Added after 2 hours 56 minutes
... for example - where is the file with the download protocol ... that's what I called it - I don't know how it is officially called by the small soft ones ...
I think in my case he would have something to tell the specialist ...

Answer: ////
.... yes, as they say, forev telepaths ...
... it turns out that you don't have to try to solder with two hundred-sized solders (as I tried to do before) - but simply with a thin blade it breaks off ... easy ...
.... there was an unpleasant moment .... did not turn on the first time .... nastoka they tama inside the laptop saved space - when they barely stuck the valve into place - it hooked the display connector .... found and corrected ...
Immediately threw in 4x22mk clay confectioners ... except for the relying 4x330

Question: Acer Aspire 5520 # 2 after roasting there are no ISO artifacts

Acer Aspire 5520 another patient was simply dead, there was no reaction to the button.
Frying the crystal along with the chip gave initialization.
The screen turns gray with vertical stripes, then the laptop fades
and the power button blinks every 3 seconds (as if it is in sleep mode and the disk is being accessed, the diode blinks)
the screen eventually goes blank.
When you turn it on again, it immediately goes into such a "sleeping" cooler for a couple of seconds at maximum.
If you stand for a long time, the first activation again gives a gray screen with stripes.
Question: Did you fry it? (I brought it up to 250 degrees for about a minute) or the problem is somewhere else, or you can change it right away without trying to revive it.
It is necessary to revive temporarily.
It's just that I don't know if at least one ball leaves, whether it will work at all and where it is positioned,
crystal or chip?
It does not go to the external one.

Answer: In general, there is definitely overheating. But to calm your conscience, warm up some more nvidia.

Added after 12 seconds
Just not so perverse

Question: Acer Aspire 5750z - Turns off after replacing the DC charger

There is an Acer Aspire 5750z. The other day the charger cord broke off (right next to the plug). I went to a radio store, bought a replacement, soldered it in the power supply at home, narrowed the "middle" a little (for some reason the gap was larger). Launched it, works fine. Later I noticed that the laptop turns off, and only during operation (for example, I go through Chrome to ukr.net and immediately off., As if the charger was taken out.) If you turn it on and do not touch it, it does not turn off. Shutdowns are random, from a minute to half an hour. Laptop without battery. What is strange, it does not turn off on Linux, but flies away from under Windows. We are hardly talking about viruses, there was no such thing before the breakdown. Ideas?

Answer: Change the plug at the power supply unit suitable for the laptop's power socket so that the tight contact is not loose.

Question: Acer V3-571G (LA-7912P) floating charger and video driver blade

They brought me a week ago a laptop with a problem that from time to time the screen goes black. A quick load in AID gave the result that the laptop heats up well under 100 and visually a lot of dust was visible in the hinges.

The black screen is a dump of the video driver of the integrated video card (of course I tried to rearrange the driver).
The verdict is to clean and look. We agreed in a week. A week later, they brought it to me and I took it to my place for cleaning, checked that it turned on and began to disassemble it. In the process, I began to understand that it was only recently cleaned before me, there is no dust, incl. disappeared and on the hinges. I overlooked it again, changed the thermal paste, cured the hinges, assembled ...

And then problem number 2 opened up: A laptop on charging constantly beeps once, which stops charging, then starts again, usually this happens at 95% of the battery and the charge does not go higher, if you charge a slightly discharged battery, then this does not happen until it reaches level 95 %. It works fine without a battery, even the blade of the video driver did not catch. I threw another battery that was known to be working - at first everything was fine, then in Windows it rejected the OS and asked to change it, in general there was no charging. Charging is serviceable, I threw another one.

Actually, where to look, I just can't believe that with charging my jamb - I went through 2 more times, looked, everything is in order in terms of assembly, I did everything neatly. I think that after all, the problem was initially (but then why didn't I notice it a week ago?) Or after cleaning by someone else it could arise. before cleaning, I did not check the laptop enough (I did not connect it to charging at all).

Can the problems be related? Where to look?

Answer:

Chernomor wrote:

The lyrics are one .. without a single measurement. Lyric advice - it is stupid to solder the power tail to the charging socket.

You know, like in medicine, there are diagnosticians, and there are surgeons :)
Without a battery, everything works fine from the mains, for 2 hours of load there was not even a blade of the video driver.
I also tried to completely discharge the battery, and then charge it - there were no problems until the battery charging reached 95% (when the charging starts to be chopped off), i.e. up to 95% there was no video driver failure and no glitches with battery charging.

diderheb wrote:

The black screen is not a video driver blade. This is an overheated video card. And if after cleaning it stops glitching, then you are in luck. But most likely it will not stop buggy.
There may be different options with charging. Killed charger (does not give out the required power, wire breakage, mainly near the connector), problems in the power circuits (was flooded, cold soldering, ceramics, charger, etc.), power management drivers (on some laptops , mainly Lenovo, the drivers had an option to turn off charging after 60%, but this is not your option).

After cleaning, nothing has changed. That's right: black screen \u003d overheated video card \u003d blade of video driver in the system.

The charge is live, I replaced it with a knowingly working one, from the same laptop my own - the symptoms are the same.

"problems in power circuits (was flooded, cold soldering, ceramics, charger, etc.)" - I am inclined to this, but I do not have enough knowledge to understand what to check on the motherboard (the battery and charging were obviously thrown by workers , with a stranger's battery at all did not become akin), it remains only she, and what to check on the power supply circuit I don’t think. I can read datasheets only for one separate part, I get lost on the mat-board datasheet.

Thanks for answers! I hope that I will not annoy anyone with my profanity. Of the meters, there is only a Chinese multimeter.

Answer: ///
.... well, what ... in the morning I’m in a good mood ... I decided - be-cho-it will be .... (the intermediary is also learning to repair beeches ... he drunk the keys ... and it began to turn on. .. so I thought ... I'll burn these keys back ... and he will run over)
but boh had mercy ... nothing happened ... threw a jumper - the required 1.5v appeared on u12 ... stopped cycling ... and perhaps truncated .... no more changes ...
So I'll ask a neighbor with an interesting Italian nickname and with the same mother - when it turns on ... the valve twitches and turns ... or not? otherwise read your entire topic, do not reread ...

Added after 2 minutes
... maybe it's time to reflash the four-thread?

Question: Acer Aspire V5-552g - Lags in the game, overheating

People, help me, I have an ultrabook, Acer Aspire V5 552g, bought Fifa 17, downloaded from Origin, installed it, I started everything loads fine, the picture is clear, but then .... Lags, everything is floating, it is impossible to play ... The beech began to warm up frantic what to do? Prompt

How do I reset my Acer Aspire V5 laptop to factory settings? The laptop does not boot to the end, a black screen appears during boot. Important data is available only on disk (D :), it would be nice if nothing happened to them and only disk (C :) returned to its original state. For all the instructions, you need to press Alt + F10 when loading and we should get into the program to roll back to the factory settings, but in my case the laptop simply reboots. Maybe the fact is that the hidden partition with the factory configuration is damaged, but we didn't seem to do anything with it. What can you advise? Recovery discs were not created, and this is impossible, since the laptop does not have a floppy drive.

Hello friends! In this article, I will show you how to rollback acer laptop Aspire V5 to factory settings from a normally working Windows 8.1, and also in case it does not boot at all, you will also learn how to create a recovery flash drive on an Acer Aspire V5 laptop, you will need a 16 GB drive, since you cannot create disks, on the laptop does not have a floppy drive.

My advice to all readers! It doesn't matter which manufacturer you bought the laptop, first of all, find out in detail how the factory restore program works, because anything can happen in the process, even if the laptop stops loading operating system... In this case, if of course to restore boot Windows 8.1, 10 will fail, you can just roll back the laptop to factory configuration, yes, all your installed programs will be deleted and you will have to reinstall them, but you will have clean operating system as it was at the time of purchase.

But a real nightmare, even for experienced user, there is a situation when the program to roll back to the factory settings turns out to be inoperative, then what to do? In such a case, recovery discs or flash drives will come in handy, but you need to create them in advance, preferably immediately after purchasing a laptop. Read our separate article

All ways to restore factory settings toacer Aspire V5 laptop

Let's consider the three most common situations:

1. The laptop boots normally, but it is unstable, cleaning the system and checking for viruses did not bring any result, in this case, you can start rollback directly in the operating system.

2. Windows 8.1, 10 won't boot, hidden sections not deleted on the laptop, program to roll back to the original factory configurationAcer Recovery Management functions normally.

3. Acer Recovery Management.

If your laptop is Acer boots normally, but the operating system is unstable, then you can copy all important data to disk (D :) and reset the laptop to factory settings. How to do it!

Go to the interface Metro Windows 8.1

and click on the arrow

Choosing a program Acer Recovery Management

In the main window of the program, click on the Restore factory settings button.

All your personal files and applications will be removed. Further.

Do you want to delete files from all drives?

Click on the button Only the drive where Windows is installed.

All information on disk (D :) will remain intact.

Click the buttonJust delete my files

All personal files and applications will be removed from your computer.

Continue

The process of restoring factory settings begins, lasting 15 to 30 minutes

The default regional settings are correct. Further

We accept the terms of the license.

Skip

Enter the computer name, for example Andrey-PK and click Next.

Use standard parameters.

Enter your username and click Finish.

Recovered and clean Windows 8.1 boots.

As agreed, the information on disk (D :) remained intact.

Windows 8.1, 10 does not boot, but hidden partitions on the laptop are not removed and the Acer Recovery Management rollback program functions normally

We press when loading the laptop F2 and enter the BIOS, go to the Main tab, look at the parameter corresponding for enabling or disabling the factory reset feature of your Acer laptop - D2D Recovery, it must be enabled, that is, set to Enabled.

Option F12 Boot Menu , responsible for the appearance of the boot menu when you press the F12 key, must also be enabled (Enabled).

click on F10, with this we save our changes to BIOS and reboot

After rebooting, press simultaneously on two keys Alt + F10 and enter the program to roll back to factory settings.

Diagnostics

Return to original state

All of your personal files will be removed.

Disk only. which is installed windows system

Just delete my files

The laptop is reset to its original state

Windows 8.1, 10 will not boot, hidden partitions on the laptop are deleted or inoperable and you cannot start the programAcer Recovery Management

We connect the recovery flash drive to the laptop,

We reboot and immediately press the F12 key, enter the laptop boot menu, use the arrows on the keyboard to select our USB flash drive and press Enter, the flash drive is loaded.

Your computer has multiple drives. Do you want to delete all files on all drives?

Only the drive where Windows is installed.

Just delete my files

Rollback to factory configuration begins

That's basically it!

Friends, if you do not understand something, do not hesitate, ask your questions in the comments, I will definitely answer.

How to reset your Acer Aspire laptop to factory settings if the manufacturer's built-in Acer Recovery Management does not work

Articles on this topic: