How to set up a usb modem over the network. Correct configuration of the megaphone modem

Many people need mobile Internet to provide Internet access at any time from different portable devices. Beeline makes it possible to get a high speed Internet connection, which is why it is so popular. But before you start using it, the modem must be configured.
The location of the modem itself determines the quality of the signal transmission, which you should always pay attention to. In the article, we will cover issues such as setting up a profile and its parameters, installing software and how to get high internet speed.

Software Installation - Device Drivers

When buying a device - a USB modem from Beeline - you can still in the store, with the help of the seller, connect such an option to a new number, such as "Highway". This is a popular service that is installed on many communication devices to increase Internet traffic up to 20 GB per month, plus nightly unlimited in addition to the basic offer.
To get the modem to work, you need to install it on your laptop. To do this, insert the flash into the USB connector and wait for it to be detected as a new device - optical disc... If the automatic appearance does not work, you can open it manually via autorun - the Autorun.exe file in a new, defined disk.
The installation of the program will start immediately. In the pop-up windows, you read the terms of the agreement, check the box for consent and indicate the installation path on your computer. The installation takes a certain amount of time while the drivers are loaded. The procedure is intuitive and straightforward for entry-level users.

Setting up the software

For setting up a USB modem from Beeline and connecting it to the Internet, after installation, you need to go to the profile section. In the settings of this very profile, fill in the following information in the fields:

• Name - Beeline Internet;
• Access point name - Internet.beeline.ru;
• Call number - * 99 #;
• Login - beeline;
• The password is beeline.

Profiles are created for different Beeline SIM cards, if any, after unlocking.
If, during the process of downloading the drivers and software of the modem, the screen with the active profile does not appear, you can create it yourself by entering the data.

Setting modem speed to maximum

If during installation you find that the Internet speed is dropping and constantly switching to more stable 2G networks, you can fix the problem by overclocking the modem. Increasing the speed will lead to better performance and more convenient internet browsing. You need a strong signal to perform better. Mobile devices perform best where the strongest and strongest network signal from the base station is. By default, the modem will connect to the 2G network if it detects it, even if WCDMA is initially marked, and this reduces the possible speed.
To make your modem faster, you need to check the "WCDMA only" item in the settings of the modem program with the Internet turned off. 3G... If your modem supports the network 4G, then check the box “WCDMA and LTE only”. The modem should be registered with the new parameters in the high-speed Internet network, which happens automatically in the windows that appear. Next - connect the Internet and check the speed of work.
The latest generation networks “catch” not everywhere as well as 2G, it depends on the coverage density of the stations of the new communication level. The devices will work better in open spaces, and in a room - near a window, where there are no many concrete obstacles for the signal to pass through.
To amplify the signal, antennas are also intended, which are bought at the points of sale of mobile devices, and are installed outside the premises.

Many people already have access to 3G modems from various cellular companies MTS, Beeline, Megafon, as well as other cellular companies.

Basically, if you bought a modem from a particular company along with a SIM card and a tariff plan…. This cellular company and you will only use it, then this material will not be of interest to you, since all modems of cellular companies are now installed and configured automatically for the operator for which this modem was purchased, you just need to insert the modem into the USB port and follow the instructions of the driver installer. All necessary settings will be made automatically during software installation. By the way, I must say that you will always have all the necessary software inside the modem itself (that is, the modem is a kind of disk or flash drive) and you simply cannot lose the installation disk with drivers as it was before, unless of course you lose the modem itself.

All this is true if you use the SIM card of one specific operator and his own modem.

But what if you have a modem from one operator and a SIM card from another? You may ask how and why this can happen? Well, for example, you bought a modem and a SIM card from one operator, used it and decided to change the operator because you were not satisfied with the Internet tariffs or you moved to another place of residence where there is no operator whose modem you have. There is an option to buy a new modem, but with all the availability, these modems still cannot be said that they are quite cheap. Therefore, the most profitable option is to leave the modem and change the SIM card to another operator. But there is one BIG BUT! The SIM card of another operator simply will not work in your modem! In order for the modem to detect a new SIM card, it must be re-flashed or unlocked. But more on that next time. Although, in principle, this article could be started with firmware and unlocking, but here we will talk about setting up an unlocked modem.

Because when I came across a modem, I just unblocked it, and without planning to write an article (I don’t need to flash it again), we will postpone the story about unlocking the modem for later. And now I was asked to describe the process of setting up a modem for different SIM cards. So, let's begin!

There is a USB modem MTS Huawei E1550

Where to insert the SIM card, I think it's clear?! But this modem has one more nice feature. This modem can be used as a card reader for microSD flash cards. By inserting this card into the modem, you can now also work as a regular USB flash drive. Agree a useful bonus. The flash drive is inserted from the side as if under a SIM card

In principle, this is where the features of this modem end at present, just a USB modem.

So you have already installed the modem and you have a shortcut on your desktop MTS Connect.

We launch it and see that it is already configured to access the Internet with an MTS SIM card

To access the Internet, you just need to have an MTS SIM card in the modem and, of course, a balance. We press the connect button, and you will be happy. But for us now, other operator settings are important. (The SIM card of the operator you want to configure at the moment must be installed in the modem) Therefore, we need to configure them, that is, register them in the settings.

Open the tab “ options> options "

A new window opens

Select the folder " Profile Management ".

A new dialog box will open in which we press the button "New"! This is necessary to create a new connection profile for setting up a new operator!

After pressing the key "New"

We fill in the settings.

My profile
Cellular company	We fill in
Beeline	Beeline Internet
Megaphone	Megafon Internet
MTS	MTS Internet
BVK	BWC Internet
APN is an access point. We set the switch to position Statistical
Cellular company	We fill in
Beeline	home.beeline.ru
Beeline	internet.beeline.ru
Megaphone	internet
MTS	internet.mts.ru
BVK	inet.bwc.ru
Phone number
Cellular company	We fill in
Beeline	*99#
Megaphone	*99#
MTS	*99#
BVK	*99***1# (You can also try *99**1*1# )
Username
Cellular company	We fill in
Beeline	Either we leave it blank orbeeline
Megaphone	Either we leave it blank ormegafon
MTS	Either we leave it blank ormts
BVK	Either we leave it blank orbwc
Password (usually left blank)
Cellular company	We fill in
Beeline	Either we leave it blank orbeeline
Megaphone	Either we leave it blank ormegafon
MTS	Either we leave it blank ormts
BVK	Either we leave it blank orbwc

It is desirable after filling in the line “ statistics" do not fill anything else and just after filling this line press OK.(save).

After you save these settings, the program may close completely, so we will have to open it and repeat the steps Open the tab options> options> network.

We choose

Network type

For Beeline, Megafon, MTS operators, select the item « WCDMA only ”. For operator BVK unfortunately it does not support high speed internet. We choose "OnlyGSM ".

Now we launch the second tab

It is better to leave the item here All Ranges.

There is one more point that we do not touch "Registration mode"

All settings are complete, click OK!

The modem is configured and ready for use.

Now, in the program window, select the settings of your operator and click the connect button.

With the right settings, you can connect to the Internet from any SIM card. Good luck

Currently, many types of various devices are actively used. The methods of entering their settings are also different.

A significant number of devices are configured by connecting to a computer with a patch cord or wirelessly, and a large army uses USB-connected equipment.

There is always a printed or electronic manual with the device in the kit, which describes how to enter the control panel of a particular device.

But in the case when this instruction is absent, then you can use the universal guide presented below.

Personal account of the modem

The term "entering the modem" means opening the menu of the control panel of the device, in which you enter and configure network parameters, protection systems, connect additional equipment, etc.

The following names are also very often used to denote it:

1. web interface;
2. web configurator;
3. settings;
4. browser (site or page) of the modem;
5. parameter input menu;
6. personal account of the modem.

Sometimes for the convenience of users with equipment connected via Wi-Fi or a special "Internet cable" to the PC for settings, there is a complete CD, with which you can quickly enter the parameters and step-by-step guidance by the wizard of the entire procedure for entering the parameters.

Most often, the network device address "192.168.1.1" is used to enter. The following manufacturers prescribe this IP for their devices by default:

1. Zyxel Keenetic,
2. Asus;
3. Upvel;
4. TP-Link;
5. Lincsys;
6. Sagemcom;
7. Cisco.

Other equipment manufacturers often use the IP "192.168.0.1". These include D-Link and Netgear.

The numbers or symbols may differ, but the operating principle for opening the web configurator is almost the same.

For devices connected via a USB port, the procedure for launching the interface is even easier, since usually after plugging into the PC connector, the driver installation is automatically started and the quick setup program opens.

As a rule, USB modems from telecom operators, for example, MTS, Megafon, Beeline, are already flashed with all the provider's network parameters and the user is only required to come up with an original security code.

Starting procedure

device control panel

The component parts, along with the device, usually contain everything you need to set up the operation of the device.

If this provides for a connection to the computer with a patch cord (Ethernet cable), then one end of it should be inserted into the LAN socket of the device, and the other into the network card of the PC (of course, manufacturers also provide for a Wi-Fi connection for further settings, but it is recommended log into the web configurator of the modem using a wired connection, as this will avoid many problems when updating software and entering network characteristics).

It should be noted that you do not need to be connected to the World Wide Web to enter the web interface. Next, you need to insert the cord from the power adapter into the corresponding socket in the device, often “Power” is written under it.

Supply power to the device and turn it on, if a button is provided for this. If the device is not equipped with an on / off button, it will start immediately after inserting the adapter into an electrical outlet.

The LAN LED on the front of the unit will light up, and the connection will be displayed on the PC.

After completing the wired connections, you will need to perform the following steps while sitting at the computer:

The design of the personal account of the device is different for the developers, but basically they are Russified and reference information is provided.

For example, if the device is provided by the Rostelecom provider, then the menu will be made in the corporate color.

Sometimes the specified authorization parameters on the device labels may not work. This means that they were previously corrected.

In order for the name and password set by the manufacturer to take effect again, you will have to reset the settings.

For this purpose, find the "Reset" key on the device body and, by pressing, hold it for about ten seconds. The machine will restart and the initial parameters for entering the interface will be valid again.

Execution option

Let's give a specific example of entering the Promsvyaz M-200A modem for the subsequent configuration of the Internet from ByFly.

Having connected it to a PC as described above, open a browser and type "192.168.1.1". After clicking on "Enter", the authorization menu will be displayed, where in the columns of the name and code indicate "admin".

Then click "Login".

The interface will immediately appear, where you can already start entering the parameters specified in the agreement with the provider.

How to open the modem settings from a mobile operator?

Among users who prefer an active lifestyle and are often on the road, modems with SIM cards from cellular providers: MTS, Beeline, Megafon, etc. are especially popular.

These compact devices look about the same, in the form of a plastic box the size of a mobile phone. The most common models are from companies from China: "Huawei" and "ZTE".

As a rule, their minimum external equipment includes a USB connector, a status LED and an On / Off key.

The principle of entering their control window is approximately the same. After connecting to the USB port of the computer, the driver is installed, and then, in the network connections, the new connection is displayed.

Usually, all the settings have already been saved by the provider and the distribution of the Internet begins immediately, but if desired, it is allowed to perform more fine-tuning. Externally, the menu of web configurators will be different for every company, but the essence of the login procedure is the same.

It is required to launch an Internet browser and type "192.168.1.1" or another, which is prescribed in the instructions for the device. After the user clicks "Enter", a menu will appear asking for the code and name (they are written in the documentation that comes with the device).

A specific example of execution

Let's consider the login procedure for the Yota Many mobile modem. To get into the interface, you can use a connection with a computer via USB or Wi-Fi.

It doesn't matter what type of connection is chosen by the owner of the device, drivers are automatically installed immediately after connection.

After waiting for the completion of the process, you need to open the Internet browser and when you try to connect to any node, the router settings menu will immediately appear.

This means that you have successfully logged in to the modem and you can start entering the network parameters.

The first setup of a 4g MTS modem is both a simple and skill-intensive thing. Such a unit is intended so that you can go online where it is needed and when there is no access to the wired Internet or does not catch Wi-Fi. MTS 4G network coverage covers a large area, so there should be no problems with communication. It is a small block that plugs into a USB connector like a flash card. Agree that it is very convenient to have it at hand? The device does not take up much space and easily fits into a laptop bag or just in your pocket.

To get started, it is enough to perform a small setting that can activate the 4g MTS modem. The interface of most programs is designed in such a way that it is not at all necessary to have special knowledge in the field of computer science and programming. During installation, the program does everything autonomously, all you need to do is give your consent to the actions to be performed and specify the path to save the files.

Let's take a closer look at how to properly install a 4 g MTS modem on a computer. It is worth noting that the basic kit includes the device itself, instructions for it and a SIM card. To broaden your horizons and compare, you can still read about.

How to connect a 4g MTS modem to a computer

Initially, you should, as you already guessed, insert the sim card into a special slot. The device will work in the LTE network only with the sim card that comes with it. When installing another sim card, it will work in the 3g network and the speed, accordingly, will be lower than the declared one. Here you can find out, perhaps it will be more relevant for you.

How to set up a 4g MTS modem

After preparing for work, you need to insert the device into a computer or laptop. The operating system automatically detects and recognizes the new hardware, and then activates the installation wizard itself. If this did not happen, then you need to go to the "Start" menu, then go to the "Computer" section. The USB dongle will appear as a removable disk because it is configured with a Micro SD card slot. Installing a memory card just allows us to use it as a removable disk.

• Open the drive and double click on the Autorun.exe file,

• Then follow the prompts that will pop up on the screen from the installation wizard.

• Run the program shortcut "Connect Manager", which will be displayed after installation on the desktop.
• When the modem is registered on the Internet, click on the "Connect" button.

• First, in the device selection section, the message "MTS-connection is not connected to the network" will appear. Don't worry, wait for the connection. Immediately after establishing a connection to the Internet, the message "MTS-connect is connected to the network" will pop up in the device selection menu.
• In the "Connect" section, click the "Disconnect" button to suspend your Internet connection.

Additionally, in the Connect Manager application, you can also send SMS, activate a payment card, check the current balance and the balance of the megabyte package.

MTS settings for 4g usb modem with wifi router function

All Wi-Fi equipment in the house, be it a smartphone, TV, tablet, refrigerator, and much more can be hooked up to the World Wide Web using a flagship with a wifi router function. You can connect such a 4g MTS modem to a power adapter or a PC and start up no more than 10 devices at the same time using it.

The installation process will depend on the operating system of your computer. Let's take an example installation for Windows XP:

• Insert the device into the USB port;
• Follow the steps requested by the installation wizard;
• If you have any difficulties with automatic configuration, manually run the AutoRun.exe file;

• Open the address of the router settings in the browser (they are on the device itself). Then enter the standard name and password - admin;

• Check access point settings- the mark is not used by default should be unchecked;
• Make sure that other devices do not work to distribute a signal, this can lead to a malfunction of all modules.
• If you still can't get online, try restarting your computer.

You can see it in a separate article.
Additionally watch the video:

The Beeline operator can boast of a good speed of access to the mobile Internet. It is not surprising that it attracts many subscribers who need high-speed network access. In order to ensure a stable Internet connection, we need to configure the Beeline modem so that its control program contains the correct settings.

Special attention should be paid to the location of the modem- this will increase the stability of signal reception. In this review, we will consider several issues - how to enter manual profile settings, how to install software and drivers, how to get the highest possible access speed. We will also publish a list of parameters for the Beeline Internet profile.

When buying a modem from Beeline at the operator's office, you should immediately ask the consultant to connect one of the Highway tariff options, which provide up to 20 GB of traffic during the day and unlimited access at night. After signing the contract and making all the necessary payments, we go home and start connecting to the Internet.

In order to configure the Beeline modem on a laptop, you need to turn on the laptop and wait until the operating system is fully loaded. After that, we connect the Beeline modem to the laptop into one of the free USB ports - the installation of the drivers will begin, and after a few minutes we will find a new optical disk in the system... Don't be scared - this is absolutely normal. If autorun does not work, go to the disk that appears and run the Autorun.exe file there.

Next, the installation of the control program will begin. We agree with the license agreement, make sure that the installation path is correct, after which the automatic installation of the device will begin. There will be a pause during the installation process - the installation of the drivers of the modem itself will begin, and notifications about the drivers and devices being installed will begin to appear in the system tray (where the clock is ticking and the icons of some running programs hang). After a couple of minutes, the installation of the control program and drivers will be completed, and we can start connecting to the Internet.

Configuring software

During the installation of the control program, the settings of the Internet profile for access to the Beeline network will be included in it. If we go to the program settings, we will see the following parameters there:

• Profile name - Beeline Internet;
• Access point - internet.beeline.ru;
• Dialing number - * 99 #;
• Login and password - beeline.

If necessary, we can create profiles here for other SIM cards(provided that the purchased modem was unlocked).

If after installing the control program you did not find an active profile, you can create it yourself by specifying the parameters published above.

Tuning for maximum speed

Is the Internet barely crawling? Does the indicator indicate that the modem is constantly switching to low-speed 2G networks? Then let's overclock the modem to the maximum speed. If we recall the principles of cellular networks, then we will find out that mobile devices always connect to base stations with the strongest signal... Even if the WCDMA priority is set in the modem settings, if there is a strong signal of 2G networks, the device will constantly switch to low-speed networks.

In order to overclock the modem to the maximum, you need to disconnect from the Internet and go to the settings of the control program. Here we check the box "WCDMA only" (or "WCDMA and LTE only" for modems supporting 4G networks). After that, we wait for the modem to register in the high-speed network and click on the connect button - the speed will become noticeably higher! By the way, to improve the effect, try placing the modem closer to the window - there the signal strength may be higher.

Also, signal amplifiers and external antennas affect the speed of access to the network. They can be purchased in many telecom stores and online stores.