Menu
Is free
check in
the main  /  Firmware / Can I reflash htc. The best firmware for HTC Desire with Sense shell - Runnymede and RuHD

Can I reflash htc. The best firmware for HTC Desire with Sense shell - Runnymede and RuHD

How to flash HTC Desire?





HTC Desire is a communicator (smartphone) with the Android operating system. It was developed by HTC. Let's talk in more detail about how to flash HTC Desire in different ways.

Preparing for firmware

Firmware is the replacement or update of the phone's software with a new one. Flashing your phone is the same as reinstalling Windows on a personal computer. For a successful flashing, you must complete the following steps:

  • To obtain superuser rights (root-rights) on the site unrevoked.com, download the program "Unrevoked". Root rights are a special account in UNIX systems. The owner of such an account can perform all operations without exception.
  • Run the downloaded program and select the "Hboot Driver" file. Then follow the instructions to install the HBOOT driver. You can download drivers for self-installation at unrevoked.com.
  • Next, you need to disable Desire and enable it in the HBOOT system. This can be done using the Power and Volume Down buttons. Press them at the same time.
  • Then the smartphone must be connected to the PC using a USB cable. We are waiting for the HBOOT USB PLUG message to appear, and go to the "Device Manager". Right-click on the Android 1.0 device and select the "Update drivers" section.
  • Click on "Search for drivers on this computer." Next, you need to select the folder into which the drivers were unpacked.
  • Exit HBOOT menu. The Volume Up, Volume Down buttons (moving through the menu items) and the Enter button will help you with this.
  • In normal mode, start your smartphone and turn on the "USB Build" mode.

If you installed HTC Sync, uninstall it, but keep the drivers. Next, launch Unrevoked and connect your device to your PC. Give your consent when requested information. Then wait. The device will reboot, and as a result, the message "Unrevoked 3 Painless root and reflash" should appear.

How to flash HTC Desire: the main part

The procedure will be as follows: first download the firmware. You can download it on the site w3bsit3-dns.com. Recommended firmwares are RuHD and InsertCoin.

Next, you need to clear all user data. To do this, in the device menu, select "Settings" -\u003e "Privacy" -\u003e "Reset data". This can also be done using the firmware recovery mode. To do this, go to the Recovery menu, select the "Wipe data / factory reset -\u003e" Yes "section. Due to this, the firmware modules will not match.

How to install the firmware file for HTC Desire?

  • From the Recovery menu, select the "install zip from sd-card" file. Turn off or turn on signature verification (Clockwork) if necessary.
  • Next, find the zip firmware, select it and run it.
  • When the installation is complete, you will see the message “Installation completed”. Restart your smartphone and wait for the download to start.

The firmware usually takes about fifteen to thirty minutes. As a result, you should get a new version of Android.

How do I expand the memory for applications?

The phone firmware itself takes up a lot of free space. In order to download various applications, your smartphone may not have enough free memory. In this case, a special program will help you. For this:

  • Download the "ROM Manager" program from the "Market" and run it.
  • Next, find the item "Create partitions on the SD card". Select the size of the ext partition.
  • The device should reboot and a partition will be created.

You can also familiarize yourself with other articles on our site on similar topics: and.

Many users specifically install firmware on their HTC smartphones without a proprietary shell - Sense in order to free up more memory, get rid of brakes, and install other launchers. But there are those who like HTC Sense and they can be understood, because the shell from HTC is rightfully considered the best interface from the manufacturer of Android devices. In this post, we will look at the best way to get custom firmware on your HTC Desire with the latest version of HTC Sense, which is used on top-end HTC Sensation smartphones (Original, XL, XE) - Runnymede and RuHD.

Runnymede AIO Firmware

It is the most popular custom firmware with Sense skin for HTC Desire. Thanks to the huge community on xda and straight-handed programmers, the firmware really amazes with the beauty of Sens 3.5 and the speed of work.

Features of the Runnymede for Desire:

  • The firmware is based on the official firmware HTC Sensation XL 1.22.461.2 : Android 2.3.5with sheath HTC Sense 3.5
  • Full version of Sense 3.5 including everything 3D widgets and effects.
  • RCMix3D Tweaks: a special menu for lockscreen settings, statusbar, processor and system tweaks and many other system settings.
  • Built-in App2SD for transferring any applications to the card
  • Deodexed & zipaligned
  • Init.d support
  • Fully optimized system for best performance with all Sense 3.5 effects
  • Multilingual
  • Ability to customize trackpad unlock and wake-ups.
  • Superuser 3.0.7
  • The ability to fine-tune the power supply and processor frequency (Daemon controller, IncrediControl)
  • Graphic touch installer
  • Beats Audio

Firmware presentation video Runnymede for HTC Desire

Requirements Runnymede for HTC Desire

Installation Runnymede for HTC Desire

  • Make sure that your Desire meets all the requirements described above, all of them are required for Runnymede to work correctly (partition table, s-off, ext partition), if you are installing custom firmware for the first time and are not confident in your abilities, you.
  • Runnymede -
  • Install .zip from Sd card in recovery)
  • The graphical installer will load, follow the instructions on the screen

RuHD firmware

RuHD firmware for HTC Desire is essentially a domestic modification or version of Runnymede, some goodies have been added, something has been removed, tweaks and scripts from domestic craftsmen have been added.

Features of RuHD for Desire:

  • Android 2.3.5 and HTC Sense 3.5
  • Beat bass & Xloud
  • Works on WiFi N networks
  • Integration with HTCSense.com
  • All languages \u200b\u200bexcept English and Russian have been removed, wherever possible the Russian translation has been improved.
  • Installation completely in / system (free memory - 15mb), does not require ext partition
  • The firmware includes su, busybox, terminfo, passwd and group
  • hosts are configured to cropping ads (no need to install third-party AdFree apps, etc.)
  • APP2SD + - the ability to transfer applications to a memory card (you need an ext partition!)
  • Optimized loading, sqlite defragmentation at startup, zipallign
  • Availability of processor profiles
  • Support OTA updates and installing firmware add-ons for one branch
  • Additional RuHD settings menu - system tweaks, processor control, advanced interface customization (analogous to the RCMix3D Tweaks menu in Runnymede)

RuHD requirements for Desire:

  • Desirable, but required: S-OFF, ext-partition on the map
  • The latest version of the radio module (available on the firmware website, you can flash it after installing the firmware)

Installing RuHD for Desire:

  • Make sure that your Desire meets all the requirements described above, all of them are required for the correct operation of RuHD, if you are installing custom firmware for the first time and are not sure of your abilities, you.
  • Back up your data (for example with)
  • If you are switching from another firmware, then before starting you need to make a full wipe! (full wipe - data \\ factory reset in recovery)
  • If you want to update the version RuHD -clean cache and dalvik cache, / system and / boot through recovery
  • Download the firmware from the links above, put the zip archive in the root of the card and flash from the recovery ( Install .zip from Sd card in recovery)
  • Follow the instructions on the screen

Conclusion

Both firmwares are very high quality and stable, great for everyday use. The main and perhaps the only drawback of both firmwares is excessive power consumption, but of course this is a fee for all the Sense 3.5 chips, compared to other custom firmware for Desire without Sense (for example), the battery lasts 10-15% less. But on the other hand, the speed of work of both firmwares is at a height, the developers really managed to achieve almost perfect smoothness and speed of work.

The best firmware for HTC Desire with Sense shell - Runnymede and RuHD:
rating 80 of 80 based on 80 ratings.
Only 80 reviews.

To unlock the bootloader, you need to do the following:

1) Remove and reinstall the battery.

2) Press and hold the power and volume down buttons at the same time.

3) Use the sound keys to select "Fastboot" and press the power button.

4) Connect your smartphone to your computer using a USB cable.

5) Download and install the Android SDK (Software development kit). You can take the archive on the official site, there are versions for Windows, MacOS X and Linux. You may also need Java (you can download from the official site) and the program HTC Sync, which includes the required drivers.

6) Unpack the Android SDK, create a new folder (for example, C: \\ Android) and copy three files into it:

a) To find these files, run SDK Manager.exe from the \\ android-sdk-windows folder.

b) Wait a couple of minutes, the packages available for download will be displayed. Install Android SDK Platform and Android SDK Tools from them (or update if your SDK version is r11).

c) Once the installation is complete, you should be able to find:

Adb.exe and adbWinApi.dll in the \\ android-sdk-windows \\ platform-tools folder.

Fastboot.exe in the \\ android-sdk-windows \\ tools folder.

MacOS and Linux users can download fastboot binaries from the following links:

- fastboot-mac

- fastboot linux

7) Open Command Prompt (Start\u003e Run\u003e type CMD or Start\u003e Run\u003e type CMD, Win7 users can find Command Prompt in Start\u003e All Programs\u003e Accessories\u003e Command Prompt).

8) Go to the folder with the created files (for example, if the folder is C: \\ Android, then enter “cd c: \\ Android” in the command line).

9) Enter "fastboot oem get_identifier_token" on the command line.

10) You will see one of the screens above - this is the key. It is necessary to press the right mouse button, select "mark", select the block and press the right button to copy. The key must start with

<<<< Identifier Token Start >>>>

and end

<<<<< Identifier Token End >>>>>

Then you need to go to the official website (registration is required), scroll to Step 10, insert your key into the My Device Identifier Token field, and click Submit.

11) After a few seconds, a message will be sent to the email address specified during registration with the unlock key in the attachment - Unlock_code.bin.

Save the file to a folder with other necessary software (in the example - C: \\ Android).

12) Enter "fastboot flash unlocktoken Unlock_code.bin" into the command line and see a message similar to the one shown in the screenshot above. Another message will be displayed on the smartphone screen:

You should definitely read it. In short, the meaning is reduced to the next repetition of “The dark side are they. Once you start down the dark path, forever will it dominate your destiny ", which in Russian translation sounds like everyone knows" As soon as you take the first step along the dark path, you can no longer turn away from it ... ":)

We read the notification about possible problems with third-party firmware, possible loss of warranty, deletion of all information from the device and other warnings and, if we have not changed our mind, select "Yes" using the volume control key, press the power button. Done! The smartphone will be reset to factory settings and the bootloader will be unlocked.

If you choose “No”, the smartphone will reboot, no changes will be applied.

13) To lock the bootloader, enter "fastboot oem lock" in the command line. This will not restore the default lock, but simply lock it, disallowing any further changes. To reopen, you will need to repeat step 12.

Information taken from the site http://www.youhtc.ru

How to do firmware you will find the answer in the question "HTC Wildfire firmware. How?"

  • Liked the answer: 1

Today, HTC's smartphone called Desire C (not to be confused with other Desire phones of past generations) has fallen into our grasping paws. The device is remarkable first of all in that it houses the Qualcomm MSM7225A processor, known for its outstanding characteristics. 600 MHz for the fourth android? In 2012 (released May)? I would like to look tenderly into the eyes of the developers of the device and ask - guys, you need to save wisely. As a result of the manufacturer's ugly decision "out of the box", the phone thinks so slowly that there is a need to do something. The money has been spent, and the phone, in principle, is good, if not for the processor. The obvious solution is to speed up everything and everything by flashing. No sooner said than done, we are starting to remove the restrictions. To begin with, a warning - everything that follows below will automatically void the warranty (but not the phone's performance). You assume the entire risk in this regard.

Before you start, copy all important files from your phone, including your phone book! A blank memory card of at least 2 GB (no more than 4) must be inserted into the phone. In the application settings, check the checkbox for debugging by USB and software installation from other sources!

Drivers and bootloader unlocking

The first action that awaits us while waiting for the transformation of the carriage into a racing car is unlocking the bootloader. Get ready, you will have to download and install a lot. First, we pull the Android SDK out ( http://developer.android.com/sdk/index.html#download) for your version of the system (x86 or x64). Put it on. Perhaps during installation you will be asked to install Java ( http: //java.com /). Choose your version of the operating system and add the missing, then continue to install the Android SDK. Having installed both, take a look around. The android-sdk-windows, which is on the C: drive, has the SDK Manager program. We ask her to install us additionally the Android SDK Platform and Android SDK Tools. In turn, here we are looking for a couple of files that are useful for the rest of the process as a whole. This is adb.exe and adbWinApi.dll (daddy android-sdk-windowsplatform-tools)and fastboot.exe (hidden in android-sdk-windowstools). This trinity you are without a shadow of doubt copyto the root of the C: drive (in other words, without dropping into the folders available there). Create your own folder named Android. Move the three files to the Android folder. A start. Think the install frenzy is over? We've only just begun! We are strongly advised to add to the list of installed HTC Sync ( http://www.htc.com/www/help/). Reluctantly, agree, remove all unnecessary later. HTC Sync contains the necessary drivers, which is why it is so needed. Additionally, install the HTC driver package ( http: //yadi.sk /d /sY09bJ2_1ii-k).

After installing all the software, reboot. While the computer fiddles with the hard drive, pull the battery out of the phone, wait five seconds, and then plug it back in. This is necessary, because even the shutdown button does not completely turn off the device, but it is necessary that the power is not supplied at all. We check the dexterity of the fingers - simultaneously hold down the sound key down, and also turn on. The phone will show a dark screen and light letters. Navigate the menu with the sound keys until you see that you have switched to the fastboot item. Select it with the power button by lightly pressing it. The phone will start in the mode we need. Connect it to your computer, open Device Manager and make sure the smartphone is visible to the operating system.

In the start button, you probably saw the "execute" item. We call the command line by typing CMD and pressing enter. Users of the stable XP rarity will find the command line invocation in the search. Run it and leave the window open, it's time to get down to the boring task - register on the site http://htcdev.com/ (an account confirmation will be sent to the mail). On the right of this site for those who like to mock phones, you see a window with three answer options. We like Unlock Bootloader,go to it. The next window asks for the phone model and your decision - to unlock or not. Naturally, we cannot refuse, it was not in vain that we filled the computer with programs and drivers with might and main ?! Our device is not in the list (remember the letter C in the name), so scroll down to the bottom, it shows All other supported ... Let's dwell on it. Press Begin and quickly scroll to the last page, along the way seeing that we have done 8 out of 10 required steps. Leave this window alone for now and return to the command line, which beckons with a black background and white letters on it. By the way, our fathers and mothers, grandparents were sitting behind such a colorful interface - this is where the harsh everyday life of the user is, and here we are complaining about the installation.

In the command line, enter the command (there is no other way to say):

cd c: / android

Then another one:

fastboot oem get_identifier_token

The terminal will give us an indescribable beauty with something like this:

Copy with the right mouse button all the text that starts with a line <<<< Identifier Token Start >>>> and ending with the same, but with the word End. It is necessary to copy by capturing these lines. Paste the newly copied one into the window under item 10 on the HTCdev website (so it waited for its finest hour). Do not forget to confirm that you copied everything with the Submit button. HTC (more precisely, the robot instead of it) will send you an email with the attached archive a minute later. Take it. There is Unlock_code.bin,that it just asks for a folder to other files with strange names. Send it to C: / Android. Go back to the lonely command line by copying this: fastboot flash unlocktoken Unlock_code.bin.The phone, in response to the launch of the command by the enter, will inform us that we now belong to the subspecies of the Dark Jedi, since we have switched to the dark side of the force (as it is written, we are not kidding). Then there will be horror stories about the loss of warranty, low-quality firmware and other joys. If, after reading, you are not scared, then select yes by scrolling down with the sound keys (the choice is the power button). You can abandon the venture with paragraph no. Everything will go back to the beginning. That is, to the complete destruction of everything in the phone's memory, including the phone book. Just factory settings.

By agreeing to go to the dark side, we get an open bootloader. The phone will restart while put it aside. The case is not over yet, there are many interesting things ahead!

ReceivingRoot and installing firmware with overclocking the processor specifically forDesireC

And again, take the postponed device in your hands, pull out the battery and wait 5-10 seconds. After inserting it back, start the phone as you did above - by pressing the volume key down and turning it on. Select from the fastboot list by pressing the power button. Connect your phone to your computer and wait for the phone to be detected.

A small but powerful program is capable of obtaining administrator rights, take it here ( http://yadi.sk/d/XsleRuhW1iiAO). Unpack it to any place that is more convenient (for example, on the desktop) and run install-superboot-windows.bat from the administrator. The executable file will be immediately executed by launching it into the administrator's phone. Wait for the message about the end of the process and restart the device. Among the programs will be the Superuser application.

The penultimate step in the dance with the phone is the installation of an alternative recovery CWM, which allows the installation of third-party firmware. Take the archive here ( http://yadi.sk/d/Xxq-UMVI1ij-w), move recovery.img to the C: / Android folder, where all the rest of the good is located. Go to the command line, write the text there:

fastboot flash recovery recovery.img

Then write

adb reboot recovery

The phone will restart in CWM recovery (CloclWorkMod recovery is written on the top of the screen). Select the reboot item on the screen. The phone will boot normally. Connect it to the computer and copy the archive to the memory card ( http://yadi.sk/d/QzLvB1sO1ijVY) with firmware (without unpacking). From the copy you have left, pull out the boot.img file and place it in C: /Android.

Copy to the command line: adb rebootfastboot

The phone will reboot into familiar text beauty. On the command line, write:

fastboot flash boot boot.img

So we flash the core with the processor overclocked to 726 MHz (in the settings a little later, you can decrease and increase the processor values, but not more than the specified figure, otherwise an abundance of glitches is guaranteed). Having seen the report on the success of the event, we do the last part of the reflashing dance with a tambourine.

There is just a little bit left, be patient, dear. We will install the firmware based on the official firmware 4.0.3, but with the presence of a superuser, overclocking the processor, speeding up the firmware, reducing the consumption of RAM, the ability to set special sound settings that improve the sound in the headphones (see sound profiles in the settings).

Screenshots of the system in front of you:

Write on the command line:

adb reboot recovery

In the touch menu that appears, select the backup item, wait for a copy of the standard built-in firmware, just in case. If you don't like the unofficial one, you can return your old one by booting into recovery and selecting nandroid - restore.

Having saved, before the final firmware we clear the old system - right there, in recovery, look for the items Wipe Data Factory Reset, Wipe Cache, Wipe Dalvik Cache (the latter, most likely, will be in advanced). Choose them to make room for the new occupant of the phone. And now, the fanfare sounded - we are installing the firmware! Across Install ZIP from SDCARDchoose NamelessROM.zip.For a minute and a half or two (up to five), it will be installed. After completing the task, the phone will write a message that everything is fine. Select the reboot item in the phone. The smartphone will restart normally. The first download lasts about ten minutes, be patient. When the start screen appears on the screen, your stay with the new system begins.

Desire HD cannot be upgraded to Android 4.4.2 using standard methods as HTC no longer plans to release official updates to Desire HD. But there is a way out. You can install custom firmware on HTC Desire HD. This article provides your attention with instructions for updating the OS of a mobile device to the latest version using the most common custom firmware for Android - CM11.
When CM11 is installed on HTC Desire HD, the user gets the opportunity not only to update the smartphone OS version to the newest one, but also to a number of exclusive features typical only for CyanogenMod. In addition, by installing a custom ROM, the user will be able to increase the performance of his Android, as well as the clock speed of its processor. It becomes possible to install almost any custom kernel.

Before installing the firmware on HTC Desire HD, you should go through the preparatory stage, which includes the following steps:
First, get it, otherwise the installation of custom firmware will become impossible.
Root access will void the HTC Desire HD's factory-resettable warranty. If you need to return, you simply install the latest official version of HTC firmware.
It is also necessary to install a custom recovery image - the latest versions or.
Due to the need for a wipe, take care of the settings, important files and installed applications. It is also worth remembering to sync your contact list with your Gmail account.
Create a Nandroid backup, which will make it possible to return the user to the current version of the OS.
Make sure that HTC Desire HD has enough battery power, that you have a USB cable for your smartphone, and that all security devices are turned off on your phone and PC.
Activate the option on your Desire HD (via the menu - settings - developer options).
It is worth remembering that only you are responsible for this procedure, its success.

Updating HTC Desire HD to Android 4.4.2 using custom ROM "and CM11

1. Download the update archive.
2. Downloading.
3. We save both files on your personal computer, but do not unpack them yet.
4. Connect HTC Desire HD to your PC using a USB cable.
5. Move the two files mentioned above to the SD card of the device.
6. Disconnect the phone from the PC.
7. Turn off the HTC Desire HD smartphone.
8. Load the device in recovery mode.
9. Using options wipe data factory reset, wipe cache partition and wipe dalvick cache we make a wipe.
10. We go back to the main menu of the recovery, select the section install zip from SD card, then choose zip from SD card... Install the found update file.
11. We perform all the same actions with the Google application package.
12. Find the main recovery menu and reboot the device - reboot system now.

After all these steps, it will not be difficult for you to update your HTC Desire HD smartphone to Android 4.4.2 using the custom ROM "and CM11. Having discovered that the new firmware is not what you need, you can restore Nandroid at any time. backup using the restore mode recovery option.