the main / Firmware / Universal remote control Gal 005. How to configure the universal GAL remote control for samsung TV

Universal remote control Gal 005. How to configure the Universal Gal Remote for Samsung TV

The universal infrared remote is designed to control televisions, DVD players, home cinema, satellite, cable, essential digital television receivers. Adapted for Tricolor TV satellite receivers. Built-in codes base of various manufacturers. Code selection manually or automatically. Various ways to adjust the remote. Search by product name. Large base codes of various manufacturers. Various ways to adjust the remote. Ergonomic location of buttons. To control four devices.
The device with which the remote control works: TVs, LCD and plasma panels, projectors and projection TVs, DVD players and recorders, home theaters, video recorders, satellite, cable, cable, essential television receivers, various audio devices, added code for receivers GS8300, GS8302, GS8304 , GS8306 used in the tricolor TV broadcast system.
Specifications: Number of devices for simultaneous control - 4; number of buttons - 36; Dimensions: 150x50x19 mm; Weight - 46 net; Battery type - 2 AAA elements.

The appearance of the goods may differ from his image in the online store.
The photo shows a sample view / serving product.
The amount of goods in the formation of an order can be changed to a smaller side in the absence of the required amount of goods.

LMRC13L, LMX11L, LMV302L, LMVB01L

BEGINNING OF WORK

Gently, observing the polarity, set two AAA batteries to a special

Do not forget to change the batteries at least once

Adjust the remote control to work with the necessary devices. For this you can

use several ways. After saving the code, turn on your

device, such as TV, switch the remote control to the TV control mode

help the "TV" button and check the operation of all buttons on the universal

remote. If any buttons do not work properly, then try

pick up another code. If it did not help or did not manage to choose the code

devices, you can train the universal console buttons with the remote control
original using the learning function.

Entering a manual code

Find the brand of your device in the brand list in the table. Each brand

the devices correspond to one or more four-digit codes.

Enter the four-digit device code. When entering each digit indicator

the lamp flashes and after entering the fourth digit goes out, and the code will be saved in memory

console.
If the code you enter entered, the lamp will blink twice and will continue

burn until you enter the right code.

Sequential brute force code

MANUALLY

Press and hold the desired device selection button, for example, "TV". Through

3 seconds when the indicator lamp lights up, release the button.
Turn on the TV and direct the remote.
Use the "CH +" or "CH-" to select the code. Every time when

You press the button, the remote controls the power outage signal, turning out

codes consistently in ascending order ("CH +") or decrease ("CH-"),

respectively. While sending the signal the light flashes.
When the desired code is found, your TV will turn off. Click "OK",

the indicator lamp will go out, and the code will be saved in the remote.

In some modifications of the remote controls can

using the "Left" buttons, "Right"

Or "VOL-", "VOL +", respectively

Automatic code search

Turn on the device you selected, for example, TV and direct on it

remote controller.
Press and hold the desired device selection button, for example, "TV". Through

3 seconds when the indicator lamp lights up, release the button.
On the remote, press and release the "POWER" button. The remote will start sending a signal

turning off the power, turning out the codes consistently in ascending order

every two seconds. While sending the signal the light flashes.
When the TV turns off, click OK. The indicator lamp will go out,

a device code will be saved in the remote control.

Every time you start automatic search, he

starts with the last of the saved codes.

After the cycle is completed, the indicator lamp will go out,

and the search mode will turn off. Duration of cycle

search can reach 30min.

Usually the universal remote control (remote control is a small box with LEDs, diagrams and buttons. It works due to the fact that the infrared sensor on it transmits the desired code on the same sensor in another device. With it, for example, you can adjust the volume of the sound, switch the channels, change the power of this or that device and much more. From the usual universal remote control differs in the way that several electrical appliances can be recorded in its scheme. Today we will look at how to configure the universal remote control for the TV.

Setting the universal TV console

Make everything will be pretty simple. Perhaps the first time will not succeed, but you should not immediately despair.

If you have not yet purchased, then in China you can buy it at a very low price.

Setup includes several ways:

Press and hold SET (TV) to the active glow of the red LED, then once per POWER, then enter the TV code and the indicator should go out. If the indicator does not go out, then you must click on the MULT button after entering the code.
Dial the desired number and at the same time hold SET (TV) and POWER.
Hold SET (TV) to the active glow of the Red LED, then press POWER once again, send the remote control to the TV turned on and wait for its reaction. Then the MULT button.

In the event that the device does not start to act, you need to try to enter another number for the available TV model, or use 3 method.

If you do not want to set up the remote control or it does not work, you can ask for a worker of some electronics store, you need to know the TV code.

Setting up a universal console without code

In this way, you will have to make the setting on your own and without entering the number. To do this, you must first turn on TV. Then, on the remote, you need to hold a button called SET for a few seconds or can still be setup (TV) until the red sensor becomes bright. Direct your universal device toward TV and press the green Power button. The indicator must start blinking, then the device starts to select the code for your television receptionist. We are waiting when some reaction occurs on the TV. For example, turn off the sound, the channel switches, etc., this reaction depends on the TV brand or even from the remote. After waiting for the reaction, it is necessary to immediately press the Mute sound off button.

PDF Instructions for setting up the ROLSEN console

Below is the official manual on setting up ROLSEN: RRC - 200, RRC - 300. It may be suitable for other devices.

After waiting for several seconds, the indicator will go out and you can use. If it did not work, then try after switching on the TV and after selecting the channel turn off the sound, and then do the same actions that are described slightly higher. If you are all done correctly and your devices are really workers, then the setting must go successfully.

Purpose of buttons:

The power on / off button of the selected device (POWER).

Button Settings Console (SET).

Digital buttons for direct channel selection (0 ... 9).

Play button (Play).

Stop button (STOP).

Pause button (PAUSE).

Recording Button (REC).

The rewind button back.

Fast forward button.

Output button (MUTE).

- Device selection button for control (TV, DVD, SAT, AUX).

Volume Adjustment Buttons (Vol- / Vol +).

Channel switch buttons.

Beginning of work:

Gently, observing the polarity, set two batteries into a special compartment. Alkaline batteries are recommended.

Do not forget to change the batteries at least once a year!

Adjust the remote control to work with the necessary devices. To do this, you can use several ways.

After saving the code, turn on your device and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try picking another code.

Entering code manually:

Find the brand of your device in the brand list in the table. Each brand of the device corresponds to one or more four-digit codes. Press and hold the "SET" button, then press the device selection button, for example, "TV". When the indicator lamp lights up, release both buttons. The indicator continues to glow continuously. Enter the four-digit device code. When you enter each digit, the indicator lamp flashes and after entering the fourth digit goes out, and the code will be saved in the remote control. If the code entered is incorrect, the lamp is blinking twice and will continue to burn, you will not enter the right code.

Manual code search:

If you do not know the manufacturer of your device or you can not find its code, you can choose the code manually. To do this, first press and hold the "SET" button, simultaneously press the button of the hardware you selected, for example "TV". When the indicator starts to glow continuously, release the buttons. Then again press the SET button once, the indicator will flash. Send the remote to the TV screen and press the POWER button. Each time you press this button, the remote sends the power outage signal, turning out the codes consistently in ascending order. During the sending of the signal, the light flashes with an increased frequency. When the desired code is found, your TV will turn off. Press the button of the selected TV equipment, the indicator lamp will go out, and the code will be saved in the remote control memory.

Automatic code search:

Turn on the device you selected, for example, TV and direct the remote on it. Press once the desired device selection button, for example, "TV". Press and hold the "SET" button and the POWER button. Three seconds, when the indicator light will turn around, release both buttons. The remote control will start sending the power outage signal, turning out the codes in series in the arrangement every two seconds. While sending the signal the light flashes. When the TV turns off, press any button immediately (except the "SET" button) to stop the automatic search. The indicator lamp will go out, and the device code will be saved in the remote control.

After the cycle is completed, the indicator lamp on the console will go out, and the search mode will turn off. The duration of the search cycle can reach 30 minutes. Every time when You start searching, it starts with the last of the saved codes. If you did not have time to stop the automatic code of code in a timely manner, it is not necessary to re-repeat the entire cycle. Find out the current programmed device code, take several units from it, enter the resulting value manually and then use the procedure for manual code search. For example, you started automatically search for the TV. The TV has disconnected, but you have chosen a small receipt, so in the device's memory there is a subsequent code, for example "1015". Program the 1000 code manually. Then run the manual search procedure. If the desired code "1012", then after the twelfth clicking on the button "POWER ", TV will turn off.

How to find out the current programmed device code?

Press once on the console to the button of the selected device, for example, "TV".

The first digit of the code can be found as follows. Press and hold the "SET" button, simultaneously press the "1" button. Release both buttons. If the first digit code 1, the indicator blinks once. The lack of a signal indicator means that the digit of the code is "0".

Second digit. Press and hold the "SET" button, simultaneously press the "2" button. Release both buttons. If the second digit code is "5", the indicator blinks five times. The lack of a signal indicator means that the digit of the code is "0".

Third digit. Press and hold the "SET" button at the same time press the "3" button. Release both buttons. If the first digit of the code "7", the indicator blinks seven times. The lack of a signal indicator means that the digit of the code is "0".

Fourth digit. Press and hold the "SET" button at the same time press the "4" button. Release both buttons. If the first digit of the code "3", the indicator blinks three times. The lack of a signal indicator means that the digit of the code is "0". After saving the code, turn on your device and check the operation of all buttons on the universal remote control.

For some brands of televisions button "Power "has only a TV shutdown function. To turn on the TV again, you must click any digital button.

If your TV does not support specific functions, for example, the function "MUTE "(Turning off the sound), button"Mute "The remote will not function.

Code Distribution Table:

TV - 0000 ... 0268, 0700 ... 0746, 1000 ... 1037.

DVD - 0269 ... 0770, 0750 ... 0754, 0524 ... 0690, 3000 ... 3018.

SAT - 0371 ... 0523, 0800 ... 0884, 2000 ... 2024.

AUX, CD, DVD - 0524 ... 0690, 3000 ... 3018.

Specifications:

Working distance is at least 8 meters.

The transmission angle is at least 30 degrees.

Setup methods - manual or automatic search in the codes.

Dimensions (VCHHHH) - 195x80x30 mm.

Net weight - 210 g

Five devices for simultaneous control.

Number of buttons 32.

Elements of the AAAX2SHT.