Menu
Is free
registration
home  /  Installation and configuration/ How to make long distance calls at the expense of the subscriber. Long distance communication from Rostelecom: correct dialing

How to make long distance calls at the expense of the subscriber. Long distance communication from Rostelecom: correct dialing

The need to use landline phones to communicate with business partners, relatives, friends and just loved ones has not disappeared even in the era of mobile phones. Offices, houses and apartments continue to be equipped with conventional city telephones. To understand how to make long distance calls, you just need to carefully read the instructions for the telephone set.

Calls from landline phones

Calls from a landline phone to subscribers located in another city are easy and simple: just dial 8, wait for a long network signal, then dial the area code and the number of the called subscriber sequentially without stopping. In Russia, the area code consists of three digits. For example, the codes of Moscow are 495 and 499, and the code of Nizhny Novgorod is 831. Codes of small settlements are supplemented with a few more digits so that the number of digits in the telephone number and area code is ten.

Various operators

Long distance communication services on the territory of Russia are provided not only by Rostelecom. To determine how to make long distance calls cheaper, you need to compare the rates of operators. They depend on the distance between subscribers, the costs of a particular operator, the degree of development of the communication system, etc. Concluding an agreement with one of the operators significantly reduces the cost of communication.

International call

In order to connect with a subscriber who is abroad, it is not necessary to have access to 8. It is enough to pay and purchase a single payment card. It can be real plastic or virtual. To make a call, you need to dial the number shown on the map, and then follow the instructions of the call-center operator or sequentially execute the commands of the voice menu. In both cases, you will have to dial the pin code or tell it to the operator, dial or name the number of the called subscriber in the international format.

With the emergence of various telecom operators providing international and long-distance communication services, long-distance tariffs will be reduced in accordance with the laws of the market.

Mobile phones are the most convenient and demanded communication system. This does not negate the need for home appliances, which are still used by many citizens. From time to time there is a need to call from home to mobile within the city, long distance or abroad.

It should be noted that the dialing rules for all mobile operators are the same. You dial the code that starts the numbers within the country (+7), the code that is inherent in your operator (XXX) and (XXXXXXX) the subscriber's number. Examples of operator codes: 966, 495, 909, 965 for the Beeline mobile system.

For a home device, this dialing order is not suitable due to the absence of a plus sign on the disc or on the keyboard. Different rules apply here.

Recruitment rules

It should be noted that not all home devices can be used to communicate with the long distance. The dial-up service to numbers starting with 8 can be automatically disabled at the request of the owner of the device. This is often the case in rented apartments, so the landlord protects himself from the potential costs of home telephone services used by the tenants.

The familiar combination for calls within the country (+7) is replaced with (8). It is she who says that communication goes beyond the scale of urban communication.

Dialing order:

  1. We dial (8) - this is the code for communication within the country for landline telephones and we are waiting for a long call.
  2. (XXX) The following combination has to do with operator code.
  3. (XXXXXXX) directly number.

Example: the order of dialing numbers for communication with a Beeline subscriber will look like this:

(8) (965) (222 6632)

How to call Moscow

Moscow is the most demanded metropolis, so the question most often arises of how to call a number in Moscow from a home phone. You don't need any special knowledge for this.

Here is a written down familiar mobile number of a partner living in Moscow.

The dialing order is as follows:

  1. 8 - waiting for a long dial tone
  2. XXX three digits indicating the mobile operator
  3. XXXXXXX digits that are inherent in the subscriber's number

As you can see, the dialing order when calling Moscow is subject to generally accepted rules.

Call abroad

All calls from your home phone abroad are subject to the same rules. For example, consider an international conversation with a German mobile operator. We preliminarily clarify the code of the city we need in Germany.

Digit order

  • (8) - a code that indicates that negotiations are transferring to communication between cities, we expect a long beep.
  • (10) - a code indicating access to international communication.
  • (49) is a code assigned to Germany.
  • area code in Germany.
  • German operator code.

As you can see, all international calls start with the combination (8) (10).

Easy to remember:

  • (8) - going outside the city,
  • (10) - going beyond the scale of the country

Tip: for a good connection, you need to dial the entire combination at approximately the same speed. It is best to have the necessary sequence in front of you when typing, written on a piece of paper.

All of these rules show that making any calls from landline home phones is not difficult at all.

Intercity is called a loud speaker on a non-relocatable or mobile phone to another locality in the country. In terms of cost, it differs in a large direction from city conversations. At the same time, for mobile telephony, a loud speaker within one region is considered local. And for stationary operators - loud speakers inside the settlements of one region are closer to intercity.

You will need

  • - required city code;
  • - phone number;
  • - information about the long-distance communication operator operating in your region.

Instructions

1. Specify the mode of long distance communication. In settlements where digital automatic telephone exchanges have not yet been introduced, connections are made by telephone operators. In this case, you need to type room their services and place an order, informing the city you need, telephone room and the estimated connection time. But in most places, there is a mechanical long-distance communication.

2. Remember if you changed the mode intercity... Several years ago, subscribers were given the opportunity to continuously choose a long-distance operator. To do this, it was necessary to submit an application for the transition to hot-choice. In this case, for the entire call, it is allowed to choose the operator, the one that provides the best rates or the best quality in this direction. That is, with a set room and before the area code, you must add the digital designation of the company.

3. Dial for Rostelecom - 55, and for MTT - 53 for long distance calls and 58 for international calls. In other words, in the first case, the kit will look like this: 8 (dial tone) - 55 - settlement code - room subscriber. For "MTT" you need to press the following buttons: 8 - 53 - telephone area code - room subscriber.

4. Pre-select, or pre-selection of the operator, allows to simplify the special technology of the speaker. In this case, you do not need to dial additional digits, and after 8, the area code immediately goes and room phone. Many subscribers called this way before the transformation and continue to use this service now.

5. Loudspeakers from a mobile long distance in fact are no different from those similar to fixed phones with an advance selection of the operator. An exceptional but rather significant difference is the tariffs. For mobile communications, they are much higher.

6. Use ip-telephony in order to save money if you have a lot of long-distance calls. Many private companies provide this service. They get access to the existing long-distance communication channels with the help of Internet channels. After receiving a special card or signing a contract, you follow the proposed instructions. As usual, dialing numbers are much higher than with an ordinary long-distance connection. It is extremely effective to use IP-telephony for international communication.

We cannot imagine our existence any longer without mobile communications. Telephones accompany us everywhere today, we take them with us when we travel around the country and when we go abroad. Sometimes, while in roaming, we find that many of the phones we called while in the home network suddenly cease to be available. How to dial a mobile room right, in order to guaranteed to get through to every person, not only in our country, but also abroad?

Instructions

1. For loud on room and of any mobile operator in Russia, independently, they are located in your home region or any other, dial room in further format: 8 (federal operator code) seven-digit room subscriber or +7 (federal operator code) seven-digit room subscriber.

2. If you need to call the so-called direct mobile room belonging to any mobile operator in Russia, then dial room in the format 8 (area code) seven-digit room subscriber or +7 (city code) seven-digit room subscriber.

3. If you need to dial an additional room, then by typing the pivot room, wait for the system message and dial the extension later. If your phone can support a pause during the set, then after the main room and enter the pause symbol - the Latin large letter P and immediately after it - the additional room... Let's say: +7 (federal operator code) seven-digit room subscriber P extension room .

4. For a loud speaker abroad, dial room in the format + (country code) (federal operator code) seven-digit room subscriber or + (country code) (city code) seven-digit room subscriber. For Russia, the country code is 7.

Related Videos

Note!
All digits of the number are dialed without spaces.

Due to the fact that the population of the city of Moscow is constantly growing, the government is forced to take measures to provide telephone communications for all subscribers who need it. For this, the capital was divided into two zones. Home phone users on one half have room the code is 499, and the other is 495.

Instructions

1. How to dial a Moscow number? If you call from one Moscow apartment, the telephone code of which is 495, to another, where the telephone code is 499, you must do the following: 1. Dial 82. Dial the code 4993. Subscriber's number. Now, in virtually all districts of Moscow and the Moscow region, telephone networks have been modernized. And now it is not necessary to wait for a dial tone after the number 8. If there is silence after the set of eight - easily enter the numbers further.

2. If your code is 499, then the dialing procedure is the same, only you will need to dial 8-495 and the subscriber's number. From any other city in Russia, loud speakers come to Moscow by the same method. The main thing is to clarify which code (495 or 499) the person has on the other end of the wire. On the contrary, you risk not getting through, or getting to the wrong place.

3. When calling from a landline telephone number with the 495 code to another non-relocatable phone with the same code, it is not necessary to dial 495. Only seven digits of the called party number are entered. But for subscribers with a dialing code 499, dial it strictly even when making calls within the zone.

4. If you are calling Moscow from abroad, you need to dial a few more digits. First, you dial the code of Russia - 7. After that, the code of the city of Moscow (499 or 495). Then seven digits of the subscriber's phone number. In some countries, for calls abroad, you need to dial a few more digits before the country and area codes. Check with the receiving party for the necessary procedure.

5. Loudspeakers from mobile phones are no different from calls from a landline. The order of the set of numbers is the same. There is only one specificity. The dialing code 495 or 499 is indispensable in any case.

Note!
Be careful when dialing a number. A set of eight for calls from one zone to another is indispensable.

Helpful advice
If you write down a Moscow landline phone number, invariably specify which telephone code it belongs to.

Today it is allowed to connect to long distance communication without leaving home. To connect to the network " Intercity»And setting up the SIP gateway, you need an analog phone, a voice gateway and Internet access.

Instructions

1. Remove the gateway and all necessary cables to connect the device from the box.

2. Register on the website www.mezhgorod.info. Get a login and password to connect.

3. Connect the voice gateway port (labeled L1) to the Ethernet port on your computer using a network cable (included with the voice gateway).

4. Configure your computer to work correctly with the gateway. Click "Start" and select "Control Panel" from the list. In the "Control Panel" select the "Network Connections" menu.

5. Hover over the Local Area Connection tab. Right-click the Properties menu. In the window select "Internet Protocol TCP / IP" and then - "Properties". In the window, select "Obtain an IP address mechanically", and later - "Obtain a DNS server address mechanically". Click OK.

6. After all these steps, the computer will mechanically obtain its IP address from the gateway. Open a browser, type in the address bar http://192.168.8.254 (network IP address " Intercity») For authorization. Once on the page, click Login. On the default page, access to the SIP gateway settings is open.

7. Configure the WAN network to connect the voice gateway to the Internet. Select the Network Settings tab in the Basic Settings section. In this menu, specify the information for authorization and the type of connection (in this case, "Static IP" is indicated). Click the Accept button.

8. If you are working with a dynamic IP address, select the NAT / DDNS tab in the "Basic Settings" section. In this menu, check Enable STUN Client. At the STUN Server IP / Domain line, type stun.fwd.net. Later, click the "Accept" button.

9. In the "Basic Settings" section, select the "SIP Settings" tab. Check Proxy Server / Soft Switch in this menu as SIP support. Later, enter in the SIP Domain field and the IP Proxy Server / Domain address - 80.76.135.2. Enter your username and password received during registration on the website www.mezhgorod.info, in the field “FXO Attorney Number”. Click the Accept button.

Related Videos

Many probably have relatives or friends living in other cities. The need to contact them, as usual, appears at least once a year. If the speakerphone on a non-movable phone costs you less, you must remember the area code, enter it and wait for the other side to pick up the phone. With such a long-distance connection, more than every snag appears not because of the quality of the connection, but in the search and set of the required number.

You will need

  • landline or mobile phone

Instructions

1. In order to call another city, you need to perform the following sequence of actions. Pick up the handset and after a constant signal appears in it, dial the number "8" - the index through which the long-distance service is accessed.

2. After that, dial the area code to the one that you are going to call. The called party is dialed last. As an example, consider a loud speaker in the city of Novosibirsk. To call a subscriber, you need to dial a further long distance number: 8-383-XXX-XX-XX.

3. Often, when making a call, along with the communication index, area code and subscriber number, you also need to enter the code of the long-distance telephone operator you prefer to connect. In this case, they say that the number was dialed in the "hot-choice" mode, or, on the contrary, in the mode of selecting a long-distance operator.

4. Today, long-distance telephone services in our country are carried out by 7 operators. These are Equant LLC, Rostelecom OJSC, MTT OJSC (Interregional Transit Telecom OJSC), SCS Sovintel OJSC, Arktel CJSC, Synterra CJSC and TransTeleCom Company CJSC.

5. If an intercity call is made through the long-distance operator of OJSC "MTT", the called number will look in the following way (an example of the former is a loud speaker in Novosibirsk): 8-53-383-XXX-XX-XX. If OJSC Rostelecom is selected, then 8-55-383- XXX-XX-XX. If you call with the support of STsS Sovintel OJSC, the intercity number will take the form 8-51-383-XXX-XX-XX. Equant LLC: 8-54-383- XXX-XX-XX. TransTeleCom Company CJSC ": 8-52-383- XXX-XX-XX. Synterra CJSC: 8-22-383- XXX-XX-XX. CJSC "Arktel": 8-21-383- XXX-XX-XX. It should be noted that in addition to long-distance calls, the above-mentioned long-distance operators make international calls.

Some organizations each have one telephone room, while an office PBX is connected to the line. In order to get through to a certain employee, after the result of the autoinformer, you need to dial an additional room, traditionally in tone mode.

Instructions

1. If you called on room office PBX from a cell phone, after waiting for an invitation from an autoinformer, primitively dial an additional room... Even if you do not hear tones, they will still be transmitted to the line. If the employee you want to contact is on the phone, you will soon be able to talk to him. If he is not on the spot, do not stay on the line for a long time, the tea tariffication of a loud speaker starts from the moment the autoinformer responds to it.

2. When calling from a landline phone, it all depends on which PBX you serve. If it supports a tone set, then your home unit, most likely each, has long ago been switched to the appropriate mode by the corresponding switch, and dial an additional room allowed immediately after the invitation. If not, typing room office PBX in pulse mode, wait for the invitation of the autoinformer, then press the key with an asterisk (it will switch your unit to tone mode), and then an additional room... Later, after you talk and hang up, the unit will mechanically switch to pulse mode.

3. Telephone sets with disk room They cannot work with a dialer, like earlier models of push-button ones, in tone mode. If you often have to call PBXs, and your phone does not support this mode, get a special device - a beeper. It consists of a keyboard, an electronic DTMF synthesizer and a speaker, and is powered by batteries. It is enough to bring the beeper speaker to the microphone of the handset and dial the corresponding numbers - and the PBX will recognize the additional room .

4. If the telephone set does not support a tone set, but there is no beeper, and also if an additional room You do not know the necessary employee, after inviting the autoinformer do nothing, and after half a minute the secretary of the organization you are calling will answer you. Tell him the name of the employee with whom you want to talk, and he will switch you to the appropriate additional room manually.

With the development of telephone communications, additional numbers... Now, in order to find out the necessary information, you do not need to call back several times. It is enough to call one number and, following the prompts of the answering machine, dial additional numbers .

You will need

  • - non-relocatable phone with buttons
  • - mobile phone
  • - the number of the required subscriber
  • - additional number

Instructions

1. If you have a rotary dial telephone at home, and your mobile is turned off, then contact your neighbors or a friend. You will be able to dial the extension number of the called party only from the unit equipped with buttons.

2. Dial the subscriber's number. The answering machine will prompt you to dial an extension number, one that ranges from 1 to 4 digits. Put your phone in touchtone mode. This is done with a single click on the button with the "star" image. There may be an inscription tone on it or below it.

3. You will hear a short beep in the handset. Later, enter the extension number and wait for the called party to answer the speakerphone.

4. The extension is not invariably famous initially. When you call, you will hear the voice of a robot answering machine, one that lists the services and numbers that need to be applied depending on your needs. When you hear the number you need, put your phone in tone dialing mode. If the answering machine continues to list additional numbers, then lightly press the necessary buttons. Switching the phone to tone mode is enough once.

5. When you call the office or various services from a mobile phone, dialing an extension number is even easier. Press the dictated numbers without any transfer to another mode. In mobile phones, an intonation kit is initially used numbers .

Helpful advice
If the non-roaming phone does not dial the extension after pressing the asterisk, then it is initially set to tone mode. Press the intonation button again.

The telephone has long ago become a common and widespread means of communication. With the advent of mobile devices, new rules have emerged for the set of telephone numbers that you need to know to successfully make calls.


You should dial the area code if you call a home phone located in another city. It doesn't matter if you are calling from your cell phone or from your home phone. In order to find out the phone code of one or another city you need, use the phone book or enter the corresponding request into the search bar of your browser. In addition, in some cases, a set of area codes is needed to call any of the emergency services. It depends on the rules for this kind of dialing set by your network operator. For example, in order to call the ambulance service from a phone connected to the MTS network, you need to dial a further number: 8 (international prefix) - area code - 03 (ambulance phone) - 111. You do not need to dial the area code, if you call from your home to a mobile phone of a subscriber located anywhere in the world. Also, you do not need an area code if you make a speakerphone from your home phone to the same home phone located within your city. If you have any difficulties with dialing phone numbers, contact the operator of the help desk of that network. that serves you. Remember that it is impossible to call another city on your home phone without dialing a city telephone code. It has a detailed telephone base in various cities of Russia and a lot of additional functions (different cards, contacts of organizations, etc.). "2GIS" can be downloaded and installed on a computer or mobile phone, it supports Android, Windows Mobile and Symbian platforms. The guide can also be used online.

Related Videos

Not for every modern person, the question of how to call from home to mobile turned out to be closed. There are still people who need to be explained how this can be done. This article will be a step-by-step guide in this matter.

What is the correct way to call from home to mobile?

With the development of the mobile, the role of the home telephone network has been somewhat diminished today, but many subscribers still continue to use it due to lower tariffs for calls to home phones.

You can also call your mobile phone from your home phone, but the tariff will already be much higher and equal to the long distance tariff. So how does the process of calling a subscriber of a cellular operator from a landline number go? We will discuss this now.

The main nuance when dialing a cell phone from a landline phone is that it is imperative to dial an eight at the beginning of the whole combination. It replaces the combination +7, which is simply unavailable on the home machine.

After pressing the 8 key, a beep will sound in the handset, after which the next three-digit combination should be dialed - the code of the contact operator. Then comes the seven-digit subscriber number. The process flow will look something like this:

  • 8 (beep) УУУ ХХХ ХХ ХХ, where:
  • UUU - operator cipher.
  • XXX - seven digits of the contact to be called.

Attention! The home telephone device does not always have the functions of notebooks, therefore, be sure to make sure that the combination of numbers is entered correctly before calling anyone. Otherwise, you can get through to the wrong place.

Long distance home and cell phone connection

Calling a local cellular user from a home device is no different from the procedure for connecting a home phone with a mobile that is registered in another city.

But before you call anyone, it's worth making sure that your landline phone supports long distance service. Some subscribers (most often those who rent out apartments) may have a blocking to make long-distance calls.

Long distance cell phone dialing process:

  1. Press the number 8 and wait for a dial tone.
  2. Operator code dialing (consists of three digits).
  3. Dial the subscriber himself (seven digits).

International call to mobile from home phone

From home, you can even dial mobile phones that are in the office of other states.

To do this, one should be guided by the uniform rules for dialing international numbering:

  • Unchanged 8 at the head of the whole combination.
  • We go out to international communication using a combination of 10 - this is an international access code.
  • This is followed by the country code.
  • The city code of a foreign country (for dialing home users) or the mobile operator to which the subscriber is assigned.
  • And in the end - the actual number of the mobile subscriber.

It will be helpful to review:

As you can see, there is nothing complicated about it. But it is worth noting that the mobile is still worth writing down somewhere, since it is not always possible to remember long combinations of numbers.

As for the encoding of the countries, here numerous telephone directories, which are in any post office, will come to the rescue. Also, many sites on the world wide web are saturated with such information.

For example, here are some codes of the CIS and Baltic countries:

We have also collected information about other popular destinations in Europe:

CountryCountry
Austria43 Italy39
Bulgaria359 Norway47
United Kingdom44 Poland48
Hungary36 Portugal351
Germany49 Romania40
Greece30 Finland358
Spain34 France33
Czech420 Slovakia421
Switzerland41 Sweden46

The rest of the world has the following encoding:

  • Australia - 61.
  • Brazil - 55.
  • China - 86.
  • Cuba - 53.
  • Egypt - 20.
  • India - 91.
  • Israel - 972.
  • Japan - 81.
  • Mexico - 52.
  • Sri Lanka - 94.
  • Taiwan - 886.
  • Turkey - 90.
  • UAE - 971.
  • USA and Canada - 1.

Calling a subscriber in an international format is not a cheap service - so be prepared for the fact that if the conversation is planned for a long time, after a while the telephone company will send a bill for a tidy sum. To avoid this, you can make calls from a mobile phone with a tariff plan for such occasions.

Learn more when calling home to mobile

In our country, the international code that must be dialed to call home or mobile is 7 or 8.

If there is a need to call Russian users from abroad, then you should dial the number in the international format:

  • +7 - city or operator code - subscriber number, or
  • 8 - city or operator code - user number

If you need to call not on a mobile, then you should pay attention that the regional coding can be different - for each locality its own.

So the code of the Moscow region is 496, but the combinations of other cities in this region:

  • Volokolamsk - 49636.
  • Voskresensk - 49644.
  • Domodedovo - 49679.
  • Dubna - 49621, etc.

There are several operators in Russia that provide communication in the country and outside its territory. The largest are Rostelecom and Interregional Transit Telecom. When you call a number outside the subscriber's settlement, you first need to select one of the telecom operators, for which, when connecting after the eight and a dial tone, the code of Rostelecom or Interregional Transit Telecom is dialed for intercity.

How to choose the right operator?

Using a specific code is not only a technical dialing procedure when making a phone call, but also the choice of a company that will provide telecommunications services. To get the desired level of service and acceptable rates, before dialing the numbers corresponding to a particular operator, you need to inquire about the company, prices and technical capabilities. It is better to look at the official prices and conditions of long-distance communication of Rostelecom and Interregional Transit Telecom directly on the websites of the companies. It's also worth asking for user reviews.

The presence of several companies on the market creates healthy competition, which is why the consumer wins. Long distance communication between Rostelecom and Interregional Transit Telecom is licensed and meets all the necessary parameters. It is important to navigate correctly in the proposals and choose the best option. First of all, this is important for those individuals or legal entities who constantly use the services of long-distance and international communication. There are not only different price offers on the market, but also a number of other factors that are worth paying attention to.

The quality of communication directly depends on the technical capabilities and ramification of the communications network. For example, dialing on the first try, good audibility without delays, echoes and additional noise. If the economy of calls is in the first place, it makes sense to use the services of both companies, choosing the best tariffs for this or that case. Technically, this is possible, although not as convenient as automatic connection through the default carrier.

Dialing rules for long distance calls

Regardless of the telco, there are two ways to dial:

  • Hot Choice - the choice of a telecom operator directly upon connection;
  • Pre-select - connection through a pre-selected operator.

When dialing using the Hot Choice method, the two digits after the eight indicate the company through which the subscriber prefers to make the call. Rostelecom's long-distance communication code is “55”, and Interregional Transit Telecom's code is “53”. In addition to these operators, a number of smaller companies have licenses for similar activities, such as Arktel with the intercity code "21", Comstar - "23", Orange - "54", Sovintel (aka Beeline) - "51" and others.

Most often, subscribers are interested in how to make long-distance calls through Rostelecom (RTK) or Interregional Transit Telecom (MTT).

A long distance MTT call looks like this: 8 - 53 - area code - required number. An example of dialing a landline phone number in Moscow: 8 - 53 - 495 - 249 73 25, where 495 is the city code for Moscow, and 249 73 25 is a telephone number. An example of dialing a mobile phone: 8 - 910 - 249 73 25 to communicate with a number within one region or 8 - 53 - 910 - 249 73 25 for numbers in other regions.

Exit to long distance through Rostelecom: 8 - 55 - area code - the number of the called subscriber. An example of dialing to a Moscow landline phone: 8 - 55 - 495 - 249 73 25, where 495 is the Moscow code, 249 73 25 is the telephone number. An example of dialing a mobile phone: 8 - 910 - 249 73 25 to communicate with a mobile number within one region or 8 - 55 - 910 - 249 73 25 for a mobile number in another region.

You should pay attention to the difference in dialing the long-distance communication code of Rostelecom and Interregional Transit Telecom to mobile phones of your own and someone else's region.

The Pre-select connection is intended for those who prefer to receive services from a single operator. Usually, an agreement is concluded with the selected company, and all calls are made automatically, omitting the code for intercity Rostelecom, Interregional Transit Telecom or another company. In this case, the user receives a simplified dialing option, which for long distance calls through Rostelecom or another operator looks like this: 8 - area code - the required number.

If the communication company has not been selected and not previously agreed upon, then when dialing a short number, the services of Rostelecom will be provided by default.

Benefits of Rostelecom's long-distance communication services

Rostelecom is one of the largest operators in Russia on the long-distance and international calls market.

Company advantages:

  • competitive prices;
  • a wide range of tariffs, packages and special offers;
  • fast connection;
  • high quality of services;
  • simplified dialing;
  • stable connection even with the most remote settlements;
  • free long-distance calls within the Rostelecom network;
  • choice of a convenient form of payment;
  • the ability to manage services through a personal account on the company's website.

The company has the most extensive and extensive telecommunications network covering all corners of Russia, even those in which communications of other operators do not work. High technologies provide fast dialing to the desired subscriber. The connection at the first attempt indicates that the system is sending the call through the shortest and currently unloaded communication channel.

The operator offers special packages for home, office and corporate phones, developed for each category of users. It is recommended to make long-distance calls from a home or office phone by Rostelecom, having previously selected one of the tariffs, taking into account the number of required calls.

Using the correct rate allows you to:

  • lowering the subscription fee;
  • receiving additional services at special prices or as a bonus;
  • one-time configuration of multiple services.

If you need to disconnect Rostelecom's long distance communication, it is recommended to visit one of the company's offices, send an application by e-mail or contact the technical support department for advice by phone. There is also the possibility of suspending the provision of the service for a specified period.

Telecommunication operators in Russia provide telephone communication in the country and abroad, but only a few leading companies have a high level and comfortable connection speed. If you want to use the services of Rostelecom, before making long distance calls, you need to make sure that the dialed code corresponds to this particular operator. You can also use a simplified set. Which option do you prefer?