How to insert a SIM card into an iPhone? Features of installation and operation. What SIM card do I need for the iPhone? Where is the SIM card inserted in the iPhone

Last time we looked in detail on how to clear memory on iPhone using iTunes and without it, wrote a small instruction, which you can familiarize yourself with. Nowadays, it is difficult to imagine the work of a phone without a SIM card. All iPhones and most iPads are designed for communication between users, friends, colleagues and people close to us. Communication is possible both via the Internet and through the network of a mobile operator using a SIM card. How to insert a SIM card into an iPhone 7? Read on.

A SIM card is an intermediary that provides the operator of communication services with information about your device, its access to voice communication and data transmission. Full operation of the device is impossible without a SIM card. So, in this article we will deal with a seemingly simple question of how to insert a SIM card into the iPhone 6 and most other iPhone models. First, let's consider what type of SIM is required for the normal operation of the device.

According to official information from the Apple website, the following types of SIM cards are used in the iPhone, which are shown in the image. Therefore, be careful and check the consultant of the operator of communication services or insert the SIM directly in the communication salon, in the presence of an experienced assistant.

How to get a SIM card out of an iPhone 5s

All we need is to find out where the SIM card tray is located on the smartphone itself and the tool for extracting the SIM card from the gadget.

The main difficulties that may arise on your way to remove a SIM card are the availability of a tool, but this is not a problem. We will manage with the means at hand.

To begin with, if you still have a paper clip that is included with the device, we advise you to use it. Remove the cover from the smartphone and find the SIM card tray. As a rule, its distinctive feature is the presence of a hole in the case on the side of the device. Insert an original Apple paperclip into the hole and press down firmly to release the SIM card tray out of the slots.

After pulling out the tray with the SIM card from the device, the inscription SIM card is not active appears on the smartphone. We advise you to turn off your smartphone before inserting or removing a SIM card.

How to get a SIM card out of 5 iPhone if there is no original paper clip?

Probably every house has toothpicks. Many people use toothpicks after eating, but not everyone thought that they can be used as one of the improvised means to remove a SIM card from an iPhone.

ATTENTION! WE ARE NOT RESPONSIBLE FOR ALL ACTIONS THAT YOU TAKE WITH YOUR SMARTPHONE TO REMOVE THE SIM CARD.

As a rule, a standard toothpick will not fit into the hole in the SIM card tray of an iPhone. To get the SIM out of the iPhone using a toothpick, you should slightly sharpen its edges (do it already). Try to trim just a little on both edges. If you make it too thin, then the toothpick will break off when the SIM card is removed, be careful.

Where are the SIM slots on other iPhone versions?

Pretty much every iPhone comes with a SIM tray. The only exception was the CDMA variant of the iPhone 4. Therefore, if you have an iPhone 4S or newer, then you will definitely find a SIM card compartment on your smartphone. Let's describe in words where the slot is located and on which models:

iPhone 3G3GS: on the top, between the headphone jack;

iPhone 4-4S and later: On the right side of the case, which is opposite to where the volume buttons are located.

Every time you replace a SIM card, make sure you put it in the tray in the correct orientation, so be extremely careful. Our instructions will also help those users who ask the question of "How to insert a SIM card into an iPhone 7".

Reliable screen protector for iPhone - with full 3D coverage. Manufacturer, company Benks.

How to insert a SIM card into an iPhone 5, how to remove a SIM card tray from an iPhone case without breaking it? Read the answers in this article to the end.

Do you want to know how to earn money consistently on the Internet from 500 rubles a day?
Download my free book
=>>

If you became the proud owner of the fifth iPhone, then you probably faced the question “how to insert a SIM card”? The fact is that they are not arranged at all as.

It can be difficult for beginners to figure out how to safely remove a special case for a SIM card. But to deal with this issue is not at all difficult.

How to insert a SIM card into an iPhone 5 yourself

In order to insert a SIM card into an iPhone, you do not need to disassemble the phone, open the panel, or pull out the battery. Everything is much simpler.

SIM card preparation

The first thing you need to do is prepare your SIM card. It must be of the correct size. For the fifth iPhone, this is a nano-sim. This type of sim card is even smaller than micro.

If the user's micro-sim can be easily cut out on their own, then experimenting with the nano-sim is not recommended.

To cut your SIM card, you need to use scissors and a stencil specially designed for this purpose. If you try to do this with ordinary scissors, without using a stencil, it is possible to damage the contacts.

If you do not have the tools necessary to cut a SIM card, order it from your operator or purchase a new one of the required format.

Installing a SIM card

When the SIM card is ready, you can proceed to install it. To do this, you need a paper clip, decorated in the form of a key, which, as a rule, comes with the iPhone.

If for some reason you don't have one, use a regular metal paper clip. Just twist it into the desired key shape or into the letter "G".

The SIM card is inserted into the right side panel. There is a special hole in which the key must be inserted. After a light press, a special case for the SIM card will appear.

Pull out the case, insert the nano-sim into it, and place the case back into the iPhone. The SIM is inserted with the picture up, with the microcircuit down, that is, the microcircuit should be facing the back of the smartphone. Although you will not be able to insert it in another way.

Now your iPhone is ready for use, you can turn it on.

Outcome

To summarize, we can say that if your SIM card matches the standard sizes for iPhone 5, then there is no difficulty with installation. The only difficulty is to purchase a SIM card for the five in advance, but it can be solved quite simply.

Congratulations on your successful purchase, enjoy your use!

P.S. I am attaching a screenshot of my earnings in affiliate programs. And I remind you that everyone, even a beginner, can make money this way! The main thing is to do it correctly, which means to learn from those who are already earning money, that is, from the professionals of the Internet business.

No mobile phone will work without a SIM card. Rather, it will work, but it will not fulfill its main function. Given the variety of slots and formats for SIM cards, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated in this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, older Nokia phones were incredibly complex in this regard. I had to bother a lot and look for a slot where to insert a SIM card. In the iPhone, everything is provided for the convenience of the user: here you do not need to remove the back cover, and even a special tool for removing the tray is included in the kit. However, the tray itself was not invented by Apple. All the same Nokia has implemented a removable tray for the first time. But this is past history, and we will go directly to the question itself.

Types of SIM cards

First of all, pay attention to the fact that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then came the fourth generation of phones in which only Micro Sim cards could be inserted. Further, the fifth, sixth and seventh generations work only with Nano Sim cards.

All these cards differ only in size: width, length, thickness. Therefore, when buying a starter pack, it is important to check with the seller so that he sells the card of the size you need. Some starter packs come with cards of all standard sizes at the same time: that is, there are special bending lines along which you can break a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut a regular large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone received the signal of the desired operator perfectly. Even today, a typical stock SIM card can be cut to Nano or Micro SIM size and it will work.

But there is no such need today. Operators sell SIM cards of all sizes. And if you still have an old SIM card of a large size, and you bought a phone where it does not go, then in any mobile phone store it will be replaced with the required standard size. In this case, you don't need to know how to insert a SIM card into an iPhone. This can even be done in a store, and you just have to watch.

Installing a SIM card

So, how to insert a sim card into an iPhone? In the box to the phone there is always a paper clip (it is also called (iScrepka), with which the tray opens. This clip can be seen by something else: a pin, a needle, nail scissors, even a toothpick. right side (on the side of the phone).

We take our paper clip, insert it into the hole of the tray (a very small hole), press it down a little, after which the tray will come out a few millimeters. Then we simply take it out with our hands completely.

When the tray is in your hands, place the SIM card in it. It is important that it is placed with the chip down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert the card in another way, some users manage to do it.

Now insert the SIM card tray back into the slot and press down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: you don't have to turn off your phone. Previously, you had to remove the battery, and only then insert the SIM card, but now there is no such need.

After the SIM card is inside, the phone will ask you to unlock it. It is normal that it is locked by default. To do this, you will need to enter a PIN. You must know this code (it is indicated on the starter pack), but if this is your old map, then you already know it for sure.

We enter the PIN-code, the blocking is removed and the phone finds the required network. If the network cannot be found, then in the settings there is an item "Operator". There you can choose the operator who owns the card. The default option is "Automatic", and in this position everything should work fine. But there are also exceptions. Therefore, just choose your operator and the phone will immediately find the network. But if problems arise and you still do not know how to insert a SIM card into the "iPhone 5S", then move on to the next point.

If the SIM card is not detected

If, after the performed manipulations and even the choice of the operator, the phone writes: "No network", then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it’s unpleasant, but there’s nothing to worry about. They learned how to remove the lock long ago, so special slots for iPhones are sold on the radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip pad for a SIM card, a paper clip.

This article describes in as much detail as possible how to insert a SIM card into the "iPhone 6", but this instruction is valid for all models.

No mobile phone will work without a SIM card. Rather, it will work, but it will not fulfill its main function. Given the variety of slots and formats for SIM cards, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated in this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, older Nokia phones were incredibly complex in this regard. I had to bother a lot and look for a slot where to insert a SIM card. In the iPhone, everything is provided for the convenience of the user: here you do not need to remove the back cover, and even a special tool for removing the tray is included in the kit. However, the tray itself was not invented by Apple. All the same Nokia has implemented a removable tray for the first time. But this is past history, and we will go directly to the question itself.

Types of SIM cards

First of all, pay attention to the fact that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then came the fourth generation of phones in which only Micro Sim cards could be inserted. Further, the fifth, sixth and seventh generations work only with Nano Sim cards.

All these cards differ only in size: width, length, thickness. Therefore, when buying a starter pack, it is important to check with the seller so that he sells the card of the size you need. Some starter packs come with cards of all standard sizes at the same time: that is, there are special bending lines along which you can break a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut a regular large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone received the signal of the desired operator perfectly. Even today, a typical stock SIM card can be cut to Nano or Micro SIM size and it will work.

But there is no such need today. Operators sell SIM cards of all sizes. And if you still have an old SIM card of a large size, and you bought a phone where it does not go, then in any mobile phone store it will be replaced with the required standard size. In this case, you don't need to know how to insert a SIM card into an iPhone. This can even be done in a store, and you just have to watch.

Installing a SIM card

So, how to insert a sim card into an iPhone? In the box to the phone there is always a paper clip (it is also called (iScrepka), with which the tray opens. This clip can be seen by something else: a pin, a needle, nail scissors, even a toothpick. right side (on the side of the phone).

We take our paper clip, insert it into the hole of the tray (a very small hole), press it down a little, after which the tray will come out a few millimeters. Then we simply take it out with our hands completely.

When the tray is in your hands, place the SIM card in it. It is important that it is placed with the chip down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert the card in another way, some users manage to do it.

Now insert the SIM card tray back into the slot and press down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: you don't have to turn off your phone. Previously, you had to remove the battery, and only then insert the SIM card, but now there is no such need.

After the SIM card is inside, the phone will ask you to unlock it. It is normal that it is locked by default. To do this, you will need to enter a PIN. You must know this code (it is indicated on the starter pack), but if this is your old map, then you already know it for sure.

We enter the PIN-code, the blocking is removed and the phone finds the required network. If the network cannot be found, then in the settings there is an item "Operator". There you can choose the operator who owns the card. The default option is "Automatic", and in this position everything should work fine. But there are also exceptions. Therefore, just choose your operator and the phone will immediately find the network. But if problems arise and you still do not know how to insert a SIM card into the "iPhone 5S", then move on to the next point.

If the SIM card is not detected

If, after the performed manipulations and even the choice of the operator, the phone writes: "No network", then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it’s unpleasant, but there’s nothing to worry about. They learned how to remove the lock long ago, so special slots for iPhones are sold on the radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip pad for a SIM card, a paper clip.

This article describes in as much detail as possible how to insert a SIM card into the "iPhone 6", but this instruction is valid for all models.

IPhone is, first of all, a phone with which users make calls, send SMS messages, work with social networks via the mobile Internet. If you've purchased a new iPhone, the first thing to do is insert a SIM card.

You probably know that SIM cards come in different formats. Until a few years ago, the most popular option was a standart (or mini) size SIM card. But in order to reduce the area that it will be located in the iPhone, over time, the format has decreased, and today the current iPhone models support the nano size.

The standart-SIM format was supported by devices such as the first generation iPhone, 3G and 3GS. Popular iPhone 4 and 4S models are now equipped with micro-SIM slots. And finally, starting with the 5th generation iPhone, Apple finally switched to the smallest version - nano-SIM.

Insert SIM card into iPhone

From the very beginning, regardless of the SIM format, Apple kept the same principle of inserting the card into the device. Therefore, this manual can be considered universal.

You will need:

• A SIM card of a suitable format (if necessary, today any mobile operator will instantly replace it);
• A special paper clip supplied with the phone (if it is missing, you can use a paper clip or a blunt needle);
• Directly the iPhone itself.

If you did everything according to the instructions, but the phone still shows a message "No SIM card", check the following:

• Correctness of installation of the card into the smartphone;
• The operability of the SIM card (this is especially true if you cut the plastic yourself to the desired size);
• The operability of the phone (much less often there is a situation when the smartphone itself is faulty - in this case, no matter what card you insert into it, the operator will not be identified).

It's easy to insert a SIM card into an iPhone - see for yourself. If you have any difficulties, ask your questions in the comments.