Menu
Is free
check in
the main  /  Installation and Setup / Router Tenda N300 - Mal, yes delete! Configuring the TENDA FH456 router (N301, F3): connecting to the Internet and Wi-Fi network. Router covering the whole apartment and the whole house! Installing the TENDA router

Router Tenda N300 - Mal, yes delete! Configuring the TENDA FH456 router (N301, F3): connecting to the Internet and Wi-Fi network. Router covering the whole apartment and the whole house! Installing the TENDA router

Routers from the Chinese manufacturer TENDA belong to the economy class. They cost inexpensively, while qualitatively copble with basic functions. It is unlikely to wait for some kind of superprivativity from them. If you load it very much, the router can simply hang. The best use options are an apartment or a small house. Its owners are regular Internet users using homemade connection on multiple devices only for visiting web pages, news reading, exchange information on social networks and occasionally downloading music or movies. For such purposes it is enough with his head. Configuring the TENDA router (almost any model) is performed by a similar scheme, since the settings interface looks the same. Consider this question more.

Settings of various models differ little different

Login to the web interface and quick settings

Like any other router, TENDA router can be configured through a web interface. After connecting to the Internet cable router and power on, connect to the wireless network. It has a title of TENDA_XXXXXX and access password 12345678. You can also connect via a network cable. In any browser you need to enter in the address bar 192.168.0.1. After requesting the login and password, enter into each Admin field. After that, you get to the main window. In some cases, the menu will be in English. Although most models are Russified.

First of all, you need to select the connection type to the Internet, which uses your provider. Selects several options:

ADSL Dial-Up is a familiar to many PPPOE. You need to put the point on this name and fill in the field "Account Account" and "Access Password) data from the contract for the provision of services.

DHCP - Dynamic IP. Additional parameters are most likely not necessary. All data automatically provides a provider.

Some models in the same window allow you to select PPTP and L2TP - the types of connections using VPN. You will need to fill out the following fields: L2TP Server Address (Server Address), UserName, (Login) and Password (Password), Address Mode (Address Distribution Type). This information should be taken from the contract for the provision of services.

At the bottom of the page you can change the password for accessing Wi-Fi. It is much more reliable than using the default password. In the Wireless Password Password (Wireless Password) field, enter a new combination and click OK.

Advanced network settings

If the necessary settings are not enough on the starting window, in the upper corner, click "Advanced Settings). In this section, you can more accurately configure the network connection.

To select the network mode, go to the WAN Settings tab (WAN Settings), where in the "Mode" (Mode) line, select your connection type (dynamic or static IP, PPPOE, L2TP) and enter accounts.

For connectivity settings - such as network name, network mode, channel - go to "Installing a wireless network", "Basic installations of a wireless network" (Wireless Settings - Wireless Basic Settings). On this page you can configure all of the above settings.

Going to the Wireless Security tab of the Wireless Security tab, you can change such items:

SSID - network name.
Security mode (Security Mode). We recommend choosing WPA2-PSK.
Encryption via WPA (WPA Algorithms). Activate TKIP & AES.
Password (Key). There must be a length of at least 8 characters and consist of English letters and numbers.

Conclusion

TENDA routers are not difficult to customize. The whole process is not much different from the installations of devices of other manufacturers. However, some moments can confuse the user.

We hope that you could help you. We ask the owners of the routers of this manufacturer to leave comments on their work.

Choose your internet technology:

  1. 1. Preparation for configuration.

    admin, Password - admin.



  2. Choose "ADVANCED SETTINGS" (1), then "Wan Settings" (2) ("Additional installation", then "WAN installations" installations ").
    Value "Mode" (mode) Install "DHCP" (3).
    Press the button "OK" ("Clarification") (4) To save the settings.


  3. Go to section , then .
    In the Options Choose .
    In field "PRIMARY SSID" (4)
    Press the button "OK" ("Clarification") (5) To save the settings.


    "Wireless Settings" ("Wireless Settings") (1) Choose .
    In the Options Choose "Disable" ("Disabled").
    IN Choose "Mixed WPA / WPA2 - PSK".
    Option Install "TKIP & AES".
    In field "Key" ("Password") (6)
    Press the button "OK" ("Clarification") To save the settings.


  1. 1. Preparation for configuration.

    If the router is not new and has already been previously used - reset the router to factory settings. To do this, you need to turn on the router to power and clamp a small hole on the rear panel with something thin for 30 seconds. After that you need to wait about a minute.

    Connect the Internet cable to the blue connector. Connect your computer to one of the yellow connectors.

    If there is no possibility to connect to the router cable, then connect to the Wi-Fi network if the router was not previously used or the settings were reset, the network will be referred to as follows: TENDA _ ******.

    Open the browser (for example, Google Chrome; Mozilla Firefox; Opera; Internet Explorer; Safari) and in the address bar, dial 192.168.0.1.

    If you open the window with the username input query (username) and Password (password), then this is default: User - admin, Password - admin.

    This data can also be viewed on the sticker, which is placed on the bottom of the router.


    The fast setup window will open before you, click Advanced Settings ("Additional Installation") to access the main settings:


  2. 2. Setup access to the Internet.

    Choose "ADVANCED SETTINGS" (1), then "Wan Settings" (2) ("Additional installation", then "WAN installations" installations ").
    Value "Mode" (mode) Install "DHCP" (3).
    Press the button "OK" ("Clarification") (4) To save the settings.


    Choose ADVANCED SETTINGS ("Additional installation") (1), then "Mac Clone" ("Cloning of Mas Addresses") (2)
    If you configure the router on a computer connected to the cable router - click "Clone Mac Address" ("Cloning MAC Address") (3) (Only if the Internet works on this computer when connected without a router via cable!). Click the "OK" kip ("Clarification") (4)


    If you configure the router on the device connected to the Wi-Fi router - in the field Mac Address Enter the MAC address that is registered under the contract.
    After changing the MAC address in the router settings, click "OK" ("Clarification") (4).

    Which MAC address is made on the router, you can on the portal of My Account subscriber. After authorization on the subscriber portal, select Top Top Select "Equipment". In field MAC-address devices The MAS-address tied under the contract, which must be prescribed on the router.


  3. 3. Setting up Wi-Fi wireless network.

    Go to section "Wireless Settings" ("Wireless Settings") (1), then Wireless Basic Settings ("Basic Wireless Settings") (2).
    In the Options "Wireless Working Mode" ("Wireless Mode") (3) Choose "Wireless Access Point (AP)" ("Wireless Access Point (AR)").
    In field "PRIMARY SSID" (4) Enter Latin letters and / or numbers the name for your network.
    Press the button "OK" ("Clarification") (5) To save the settings.


    To configure a password to Wi-Fi network, in section "Wireless Settings" ("Wireless Settings") (1) Choose "Wireless Security" ("Security Wireless Network") (2).
    In the Options "WPS Settings" ("Installation WPS") (3) Choose "Disable" ("Disabled").
    IN SECURITY MODE ("Security Mode") (4) Choose "Mixed WPA / WPA2 - PSK".
    Option WPA Algorithms ("WPA Encryption") (5) Install "TKIP & AES".
    In field "Key" ("Password") (6) Write the password you need to connect to the Wi-Fi network (the password should consist of at least eight characters that can consist of numbers and / or Latin characters).
    Press the button "OK" ("Clarification") To save the settings.


    Settings are completed. Connect to your router and use the Internet.

  1. 1. Preparation for configuration.

    If the router is not new and has already been previously used - reset the router to factory settings. To do this, you need to turn on the router to power and clamp a small hole on the rear panel with something thin for 30 seconds. After that you need to wait about a minute.

    Connect the Internet cable to the blue connector. Connect your computer to one of the yellow connectors.

    If there is no possibility to connect to the router cable, then connect to the Wi-Fi network if the router was not previously used or the settings were reset, the network will be referred to as follows: TENDA _ ******.

    Open the browser (for example, Google Chrome; Mozilla Firefox; Opera; Internet Explorer; Safari) and in the address bar, dial 192.168.0.1.

    If you open the window with the username input query (username) and Password (password), then this is default: User - admin, Password - admin.

    This data can also be viewed on the sticker, which is placed on the bottom of the router.


    The fast setup window will open before you, click Advanced Settings ("Additional Installation") to access the main settings:


  2. 2. Setup access to the Internet.

    Choose "ADVANCED SETTINGS" (1), then "Wan Settings" (2).
    Value "MODE" ("Mode") Install "PPPoE" (3).
    In field "Access Account" ("Account Account") Enter the login that was issued when connected.
    In field "Access Password" ("Access Password") Enter the password to the subscriber's portal. (four)
    Note "OK" ("Clarification") To save the settings.


  3. 3. Setting up Wi-Fi wireless network.

    Go to section "Wireless Settings" ("Wireless Settings") (1), then Wireless Basic Settings ("Basic Wireless Settings") (2).
    In the Options "Wireless Working Mode" ("Wireless Mode") (3) Choose "Wireless Access Point (AP)" ("Wireless Access Point (AR)").
    In field "PRIMARY SSID" (4) Enter Latin letters and / or numbers the name for your network.
    Press the button "OK" ("Clarification") (5) To save the settings.


    To configure a password to Wi-Fi network, in section "Wireless Settings" ("Wireless Settings") (1) Choose "Wireless Security" ("Security Wireless Network") (2).
    In the Options "WPS Settings" ("Installation WPS") (3) Choose "Disable" ("Disabled").
    IN SECURITY MODE ("Security Mode") (4) Choose "Mixed WPA / WPA2 - PSK".
    Option WPA Algorithms ("WPA Encryption") (5) Install "TKIP & AES".
    In field "Key" ("Password") (6) Write the password you need to connect to the Wi-Fi network (the password should consist of at least eight characters that can consist of numbers and / or Latin characters).
    Press the button "OK" ("Clarification") To save the settings.


    Settings are completed. Connect to your router and use the Internet.

Good day.

Not so long ago helped one friend to create a home Wi-Fi network. Well, as he acquired a fairly new model of the TENDA router (namely FH456) - I decided to sketch this article.

In general, I must admit that I did not expect such a good set of functions, and in general, with high-quality work from the router, the price of which is $ 15 (and even run into the action, then cheaper!).

Looking ahead, I will say that the router covered the whole apartment with a stable Wi-Fi network: I specifically started downloading a popular file on a laptop (Along the way, he opened the browser, and pressed the F5 to update the pages) And he went with him in all rooms - even in two walls, the reception is excellent, the speed does not fall and does not break!

And so, let's start in order ...

Addition! My blog has another instruction on the independent connection and adjusting the router:

Configure TENDA FH456 router

Similar models: N301, F3 (configured)

Why TENDA FH456 should pay attention to the benefits. Where can one buy.

  1. main plus: good and high-quality coverage of the entire apartment or house (on the router 4 antennas, each 5 DBI);
  2. fully high-quality translation into the Russian device firmware language (even the novice user of the PC will discerning the settings);
  3. ability to adjust the wireless network signal, there are three modes: low, medium, high;
  4. the device can operate both as a router and as a repeater;
  5. pretty good processor (chipset from REALTEK);
  6. the ability to manage traffic: for example, you can limit the bandwidth to specific connected users (for example, it takes from you the entire Internet brother / match / someone else - put it on the load limit, say, in 4000 kb / s);
  7. there are functions of parental control and job schedule time setting (you can disable Wi-Fi operation at night);
  8. the remaining characteristics are quite standard, I think it makes no sense to bring them here ...

And for all these functions will have to give about $ 15 (sold on Aliexpress and some more). In ordinary stores - I have not seen such a model ...

What is included in the delivery

Box with router / appearance

Delivery of the router is quite standard: the device itself is included in the kit itself, the network cable (I was not useful for configuration, because the device can be configured at a Wi-Fi connection immediately), a power supply. Naturally, the set was the documents and a certificate in Russian - but, to be honest, it was all either not useful ...

Connecting the router and analysis with "wires"

The router connection itself is standard. The cable coming from the Internet provider must be connected to the WAN jack, the network cable from the PC to stick into one of three LAN ports. Well, to turn on the device - connect it to the power supply.

Note!

The nicely surprised Tenda - it is lack of need to connect a PC to configure the router. Those. If you do not plan to use a PC, you can only configure the router only on Wi-Fi network. Conveniently!

If everything is in order with the device - it should start burning and flashing the LEDs (as in the photo below).

  1. first, this is an address to configure the router: 192.168.0.1;
  2. secondly, the name of the Wi-Fi network, which the router will create by default, when you connect it for the first time (it can be different from mine, so see the sticker on the case it is your device!).

Setup and security Wi-Fi network

As already said above, all the setting can be performed by Wi-Fi. After starting the router, it creates a Wi-Fi network that is not protected by a password (open to everyone!). Therefore, the first thing I recommend to do is connect to it and change the password to access.

Connecting to the network is very simple - just click on the network icon in the tray (next to the clock) and select the network name, which is indicated on the sticker on the device housing (the network will be open!).

Connecting to the open network / Tenda router was first launched

The browser must immediately open the settings of the router (address: http://192.168.0.1/index.html ).

  1. the name of the wireless network (maybe any);
  2. security regime: the most relevant now is WPA2-PSK;
  3. and the password can be anyone (I recommend not less than 6 characters).
  4. Next, save the settings. The router must reboot, and you will need to re-connect to just renamed Wi-Fi network ...

Setting up Internet access

As already said above, it will be necessary on the laptop (for example) to connect again to the newly renamed Wi-Fi network. By the way, note that in most cases the Wi-Fi icon will still have a yellow exclamation mark (that is, the network will be without access to the Internet).

Then open the "Internet Settings" section. Here, already, give concrete recommendations difficult - because Depending on the provider, the network is built in all of all standards.

Important!

Data for connecting to the Internet should be specified in your contract with the Internet service provider.

It is worth noting that Tenda supports almost all options that are found in our country: PPPoe, PPPoE (Russia), static IP address, dynamic IP address, PPTP, L2TP (also optimized for Russia).

In general, if, for example, take PPPoE (Russia), as the most popular option, you will need to specify only the login and password for access (this data can be found in the contract with the Internet provider). Everything, it remains to enter and save the settings. If the data is correct, then the router is connected, and access to the Internet.

If the Internet appeared, and in general, as far as it is actively used - you can find out in the "Status" section - here you will see how fast the download is going on, return, how many people are attached to the router, IP addresses, MAC address, etc. In general, everything you need!

Status of the router

It is also worth noting that some Internet providers There is an additional. Protection is a binding to the MAC address number (each router or network card is yours). In this case, the old MAC address should be copied .

Addition!

MAC address: what it is and where to find out. How to clone the MAC address of the old network card -

You can do this in the "Management" section. The MAC address, by the way, is indicated on the sticker with the equipment (i.e., look at the sticker on your old router). Or you can connect it again to the PC, and see it in its web interface.

If we are talking about a network card - then simply open the command prompt and enter: iPConfig / All.

What else can you configure ...

In the settings of the wireless network there are a couple of interesting options:

  • the first is the task signal level . If you have a good signal all over the apartment - you can refuel it to medium or low (the default is high);
  • the second - there is an option on the task work timetables Router. Convenient, for example, disconnect overnight (or on the day, when you are not at home - and I would not really like to lazinate children without supervision over the network ...).

Another convenient feature is in the "Bandwidth Control" section. Here you can limit any user: for example, put the limit speed of 512 kb / s. It is very convenient when someone clogs the entire channel with its downloads, and your pages are loaded for 10-15 seconds.

Well, last, there is a function of parental control. It is certainly not ideal, but nevertheless. Such a thing is far from each model of the budget router.

What we have in the end

TOTAL for some 700-800 rubles. We get a high-quality router covering the entire apartment with a stable high-speed link (up to 300 Mbps). Compared with the same D-Link of budget models for this money - it's like heaven and earth! The budget option from Tenda wins in all articles.

I also note that the latest firmware versions are completely in Russian, with quality translation. In fact, the setup passed in a couple of minutes and did not have to mess with anything (I remember with a shiver, as you had to reflash TrendNet routers, because the factory firmware worked out of the hands badly).

That's all. Additions are welcome.

The tenda router is very widespread among Chinese users is now available for use in our country. The Chinese company "TENDA" actively began to conquer the market for routers, switches, modems and other similar products at the end of the nineties of the last century and quickly seized almost half of the huge Chinese market.

After that, it began to supply their routers and for export to many European countries and the American continent, where they enjoy significant success due to the good quality of the equipment produced and the very modest cost of equipment. Now thanks to online stores, the routers of this corporation have already become available in the Russian Federation.

Therefore, the question of how to set up a TENDA router, has become relevant for us. Below is the Guide to setting up and connecting the router. It should be noted that the owner of the TENDA router setting up the device will not be much labor, since its web interface manufacturer translated into Russian.

Description and main characteristics of the device

The device is perfect for home use or for a small office, it supports the speed of Wi-Fi up to 300 Mbit / c, has a stable and sustainable performance.

Equipped with three standard LAN ports and one "WAN". Good communication quality provides external antennas in the number of two pieces (non-removable type). Supports parental control and has a work schedule function. From the disadvantages it should be noted the alignment of the reset keys - "Reset" and the function buttons - "WPS".

How to connect and open a web interface?

Setting this router has a fully similar algorithm of all actions, as in other similar models. Before starting to customize the device, it must be properly connected. If the parameter entry procedure is performed through the computer, it is recommended to use the wire connected to the router from the PC. This will eliminate possible failures and subsequent malfunctions. Patch Cord is included in the delivery of the device.

It will be necessary to produce only a few consecutive actions:


Note: If the user does not have a laptop or stationary computer, then you can connect the connection using a wireless network via a smartphone or a tablet. If the router is new or reset the settings, the Wi-Fi will be displayed with the factory name, and the access code will suit "12345678".

Setting procedure

The parameter entry procedure does not make it difficult for an experienced user, but some of the literal translations of the Chinese English language specialists can put in a dead end. For example, the field where you want to print a user login is translated as a "account", since the "Access Account" is indicated in the English version of the product. But good quality assembly of equipment and indecently low price allows you to smooth out similar flaws.

Chinese wireless routers and ADSL Tenda modems are currently budgetary devices of economy class. These routers are made on the principle of reasonable sufficiency. If in Russian, then "cheap and angry". Therefore, you do not have to wait for record speeds and hurricane performance. Cheap chips and a small amount of RAM will not allow holding a greater load. Yes, this is not their path. These are homemade residents, and they live in uncompromising users who need a router to connect a smartphone or laptop via WiFi, and from a computer that is connected via a cable of users crawl through the Internet, read news, visit the social networks and sometimes download music and movies through torrents .

TENDA ROTETER IP address any model (N3, W316R, W368R, etc.) on the local network -, login to access - admin., Standard password - admin.. The home page of the web interface looks like this:

In terms of basic tuning, the tenda routers probably the simplest. All you need to configure the Internet connection is to select the desired method and enter the required data. By the way, the default wireless module is already enabled and the safety standard is set. WPA2-PSK. with encryption Aes & Tkip.. So to configure WiFi network it is necessary only at the bottom of the window in the field. Wireless Password. Set the password to WiFi Wireless Network.

I will give examples for the most popular Russian telecom operators.

PPPOE setting on TENDA router for Rostelecom, TTK and Dom.ru

In field Access Method. put a tick ADSL Dial-Up:

Strange why Tenda's Chinese engineers called the PPPoe Protocol?! For this, I'm afraid they will not be able to answer. Well, okay, it is not so important.

In field Access Account We enter the login to connect to the network of the operator, and in the field Access Password.accordingly, the password. These data are issued when connected, together with the contract for the provision of services.

Video lesson on setting up the TDODET router for Rostelecom on the example of the model N3:

Setting up Dynamic IP (IPE, Dynamic IP) on the TENDA router for TTK-Ural, Rostelecom Udmurtia and Chuvashia

This is generally the easiest type of connection. In principle, in order to configure the dynamic IP on the Wi-Fi, the tenda router must only be on the web interface start page ( http://192.168.1.1 ) Check box DHCP.and click the button OK:

Pay attention to the field Mac Address - This is the physical address of the router in the external network, which sees the equipment of the provider. Sometimes some communication operators make a hard binding of a hardware mac address. In this case, if a new device is connected, then the provider switch will not be released to the network until the new MAC address is registered. TENDA routers make it possible to fool the operator equipment. To do this, you can either bow the MAC address from the computer by clicking on the button. Clone Mac AddressOr enter it manually.

An example of configuring DINAMIC IP on Tenda routers:

Setting up VPN L2TP on Tenda for Beeline:

This is the most difficult version, because in fact it implies two connections - dynamic IP plus VPN-tunnel L2TP. To configure the tenda router for Beeline, put the checkbox L2TPin the list Access Method.:

In field L2TP Server Address Enter the Beeline Server Address - tp.internet.beeline.ru..
In field UserName.we enter the login (in the case of Beeline, this is usually the number of the personal account), and in the field Password.- Accordingly, the password issued to you upon concluding the contract.

Well, then everything is simple. We look at the Address Mode list stood Dynamic. No longer touch anything here.
At the bottom of the window, in the Wireless Password field, we prescribe a password that will be used to connect to your home wireless Wi-Fi. Press the OK button.

Video instruction how to set up a tenda router To connect to Beeline:

How to configure WiFi (Wi-Fi) on Tenda routers:

Wi-Fi wireless network on TENDA routers can be configured separately through advanced settings. To do this, make the entrance through 192.168.0.1 Admin / Admin Web configurator and click on the link Advanced Settings: in the upper right corner:

We fall into the extended router parameters. In the menu, select the item Wireless Setting -\u003e Wireless Basic Settings:

Here you can use the parameter Working Mode. Change operation from the access point Access Point (AP) on the repeater mode ( WDS Network Bridge).

Supported Wi-Fi Module Standards are selected in the list. Network Mode.. Although the most optimal option is exposed by default - 11 B / G / N Mixed.
In field Primary ssid. You can change the name of the wireless network on your own.
Wireless channel used can be selected in the list. Channel.Or leave it in automatic mode "AutoSelect", as in the picture.

The remaining parameters in 99 cases out of 100 do not recommend taking at all. Press the OK button.

Go to the next section - Wireless Security:

In the list SELECT SSID. Select the previously created Wi-Fi grid.
Parameter Security Mode. Put WPA2-PSK. with encryption mode or AES.or TKIP & AES..
In field Key.you can change the wifi password. In its quality, you can use any combination of Latin alphabet letters and numbers, but not shorter than 8 characters.
Click on OK to apply configuration parameters.