Menu
Is free
registration
home  /  Problems/ How to directly connect to the router. How to set up Wi-Fi with your own hands in Windows XP in different ways? Connecting and configuring WiFi in Windows XP: Video

How to directly connect to a router. How to set up Wi-Fi with your own hands in Windows XP in different ways? Connecting and configuring WiFi in Windows XP: Video

Modern technologies of wireless communication are already quite densely included in the life of people. They are constantly developing and improving, while such technologies have great prospects. One of these technologies is WiFi wireless communication, which allows you to connect your laptop to the network without any wires or cables. It should be noted that modern laptops, smartphones, tablets, printers, TVs and other equipment have a built-in WiFi adapter. But, despite the prevalence of the technology, the question of how to connect WiFi on a Windows XP laptop is often encountered. This is what will be discussed below.

Setting up your laptop

As you probably already guessed, before moving on to how to enable WiFi on a laptop with Windows XP OS, it should be configured. What does this mean? Each component of the computer needs to install special software - the so-called drivers. The Bluetooth and Wi-Fi wireless adapter is no exception. Without a driver, the system will not be able to enable them.

In some cases, when you buy a laptop, you will receive a disc with the necessary software. In this case, setting up the system will not be difficult. You just need to insert the disc into the CD-rom or DWD-recorder, after which the autorun program will start the automatic installation. In this case, all drivers will be installed in the correct order. Moreover, for more convenient work with the laptop, various utilities will be installed - additional programs. But what if there is no such disk?

Don't be upset. Here, too, there are no difficulties, since they can be downloaded for free. To do this, you only need to know your PC model. Next, go to the manufacturer's website, for example, if the laptop is Lenovo, then you need to go to the manufacturer's website and find your model there. It should be noted that the site will offer drivers for various operating systems, as well as for various components. We are interested in software for WiFi adapter and network card for Windows XP. After downloading the drivers, you can proceed to the installation.

If drivers are not installed on the laptop at all, then you should install them in a specific order. This is not critical, but for the system to work properly, first of all, you should install the drivers on the chipset (motherboard) and only then everything else.

After installing the driver, the system will detect new devices. And to work with the WiFi adapter, along with the driver, a program will be installed that allows you to turn the module on and off, as well as search for available networks. This completes the system setup, you can proceed to turn on and search for available access points.

Connecting and configuring WiFi in Windows XP: Video

Enabling WiFi module and searching for networks

In order to turn on WiFi on a laptop, there is a special button on which a WiFi icon is drawn (available on every laptop).

In this case, in some cases, the utility is simply launched and you can independently enable or disable the adapter. In other cases, it turns on and off when you press the button without starting any programs. It is worth noting that the operating system has absolutely no influence on this process, be it Windows XP or the seven, everything happens exactly the same.

So, after turning on the WiFi adapter on a laptop in Windows XP, an icon of the working module will appear in the lower right corner (slightly to the left of the clock). When you double-click on it, a window will appear in which you must click the "Search for wireless networks" button. Next, you will see a list of available access points, from which you need to select the desired network by name.

If this option did not work, then there is an alternative way to connect a WiFi network on a Windows XP laptop. To do this, follow these steps:

  1. Go to the "Start" menu, then to the Control Panel;
  2. Find "Network Connections" in the control panel;
  3. After that, you need to find the item "Wireless network connection" and turn it on;
  4. The next step is to connect the laptop to the network. To do this, right-click on the connection and select the "View available wireless networks" item;
  5. Here we select "Change the order of preference of networks";
  6. After that, a window will open in which you need to select "Network by access point" and put a mark in the "Automatic connection to the network" section, then close the window.
  7. Further, in the wireless network connection, you must click "Refresh network list".

After that, you need to select the desired network and click "Connect". It is worth remembering that in the overwhelming majority of cases, a password is set on the network to prevent intruders from entering, therefore, after selecting the desired connection, you need to enter the password, and only after that you will be able to join the group.

How to find out the password for your WiFi in Windows XP: Video

This completes the WiFi connection setup on a laptop with Windows XP. Now, to connect the device to the network, enter the "View available networks" menu again, select the required name and click the "Connect" button.

If everything is done, then after connecting the status "Connected" will appear, and in the lower right corner on the taskbar you will see a corresponding message, which indicates that your laptop is connected to the network.

If you cannot find the power button of the adapter on the laptop or it is broken or missing, then there is an option to enable it using Device Manager through Windows XP. To do this, right-click on the "My Computer" shortcut and enter "Properties". Next, select the "Device Manager" item and look for your adapter in the list of devices that you want to enable.

Connection setup

First, let's go over the theory a little. This will allow you to understand what Wi-Fi is and how to connect to it in a given situation and how to configure the system. It is one of the most advanced wireless technologies that allows you to create home networks without wiring. The main advantage of this technology is that the transmission speed is not inferior to the cable connection. At the same time, the range of one access point reaches 100 meters with line of sight and about 10 meters in buildings.

An access point is a base station to which all devices equipped with a WiFi adapter are connected. As a rule, in the overwhelming majority of cases, a router is used as such a station.

And before you create your network, it should be configured. It is to it that laptops and other devices are connected. Up to 200 users can be connected to one router, however, in this case, the data exchange rate will greatly decrease, since it is distributed equally among all users.

For example, if a router supports a maximum speed of about 100 Mbps and at the same time connects 10 users, then the speed for each of them will be 10 Mbps. It's not hard to imagine what will happen if you connect 100 or more users.

In some cases, you need to additionally configure the connection on a laptop in Windows XP. If you have followed the instructions, and there is still no access to the network, then you should check the IP address. To do this, in a networked environment, right-click on the wireless connection and select "Properties".

Next, in the window that appears, select "Internet Protocol TCPIP" and click "Properties". After that, a window will appear in which you need to set a checkmark on the "Use the following IP address" section and enter the following values:

  • IP address: 192.168.0.5. Please note that the numbers 192.168.0 are always the same, but the last digit "5" can be anything in the range from 1 to 150, depending on the settings and capabilities of the router;
  • Subnet mask: 255.255.255.0;
  • Default gateway: 192.168.1.1.

Now you know how to set up WiFi on a Windows XP laptop. However, there are non-standard situations that can cause additional difficulties. In this case, the approach to solving the problem should be individual, since the standard setting will not help here.

As you can see from the above, connecting a Wi-Fi network on a laptop with Windows XP is quite simple and within the power of ordinary users who do not have special knowledge. At the same time, setting up the connection does not take much time and effort. However, it is worth noting that the Windows XP operating system is already outdated, today the newer versions are Windows 7 and 8. Moreover, the latter are much easier to configure.

I have over 10 years of experience in the IT field. I am engaged in design and adjustment of commissioning works. I also have extensive experience in building networks, system administration and working with access control systems and video surveillance.
I work as a specialist in the Techno-Master company.

A home access point or WI-FI in various public places is a convenient and useful thing. Thanks to her, you can always be aware of the news and communicate with friends without using additional wires. But everyone faced problems when connecting to WI-FI. This happens on any device, but most of all owners of old laptops with WINDOWS XP OS encounter this nuisance. Therefore, the user has to configure not only the access point, but also the OS.

I'll start right away with some advice. The first step is to select software for the built-in WI-FI device. The program can be downloaded from computer forums, sometimes it comes with a laptop. It happens that a WI-FI device in a computer or laptop may not be present, then you have to purchase it separately and connect it to a PC.

Standard connection method

For fans of video instructions, we found a video with a detailed description of the inclusionWI-FI on OSWindowsXP:

If your Windows XP PC does not connect to WI-FI, then a disconnected adapter may be the cause. The laptop has a WI-FI on / off button. It can be one of the keyboard keys or it can be brought out to a separate switch on another part of the case. After pressing it, the adapter starts and the WI-FI icon appears on the Windows XP taskbar. You need to double-click on it to open a list of available networks. You need to select the network belonging to the user and click "Connect".

What if it doesn't connect?

If you cannot connect to the Internet, you will have to do a deeper adjustment of the WI-FI parameters on Windows XP:

  1. Open "Start" and select "Control Panel" from the list.
  2. Then select "Network Connections" and enable "Wireless Network Connection".
  1. Next, click on "Change the order of network preferences" and in the settings click "Network by access point". To do this, you need to check the box "Automatically connect to the network."
  2. Then you need to go back to "Wireless Network Connection" and click on "Refresh Network List".


  1. Define your WIFI and click Connect.


  1. Then you need to enter the username and key.


In the connection parameters there is a function of automatic connection with WI FI. After turning it on, the user does not have to manually connect to the Internet each time the laptop starts.

Attention! If you can't find the key to turn off the WI-FI adapter on the laptop, you can turn it on in the Windows XP device manager:

  1. Go to "My Computer" and in an open folder, right-click on any empty part of the directory.
  2. A list will open, select "Properties".
  3. At the top left, click "Device Manager".
  4. Find your WI-FI equipment and start it.

Setting up Wi-Fi on Windows XP is a little more complicated than on more modern operating systems. For example, in Windows 8, the WI-FI network is detected automatically and rarely requires manual adjustments of options. Despite this, having the necessary skills, the adapter can be configured even on XP in a few minutes.

On a stationary computer, in order to connect to WI-FI, it is necessary not only to understand the Windows XP operating system, but also to install an external element. It can be USB WI-FI adapter or PCI-E WIFI CARD.



The first option is also perfect for a laptop, if, for example, the signal is poorly picked up.

Setting up or connecting to the Internet

After a successful connection to WI-FI, you need to make sure that the Internet is available. If it is not there, then WI-FI on the laptop does not work. To solve the problem on Windows XP, you need to go to "Networked Neighborhoods" and select "View available wireless networks".


  • IP: 192.168.0.2
  • Mask: 255.255.255.0
  • Gateway: 192.168.1.1.


Causes of problems with WI-FI

The most common reasons due to which you cannot connect to WI-FI on Windows XP are:

  1. An OS with SP2 package is installed on the computer, which does not correspond to modern routers. The problem is fixed by updating the operating system to SP3.


  1. The PC does not see the WI-FI adapter. To make sure it is available, just go to the "Task Manager" and open the "Network adapters" tab. If the device is there, but it is marked with a red sign, then you need to install the driver.


  1. Adapter not included. To enable it, you may need to use not only a specially designated button on the keyboard, but also hold down the "Fn" key.


Forgot your access key?

It happens that it is impossible to connect to the WI-FI network for a completely banal reason - I forgot the password. On Windows XP it can be found.

I'll tell you how:

  1. We go to the "Control Panel", look for "Network and Internet Connection".


  1. After selecting, click "Next" and mark the addition of a new computer to the network, again "Next".
  2. We choose manual network setup.
  3. In the tab that opens, click on "Print network settings". In the notebook that opens, you will find the lost password.

You can also look for the access key in the settings of the router in the "Security" section.

Well, as always, a wish - write your questions, share your experience and let me know what topic you would like to see on our portal!

1. Connect the cable that our installers brought to your apartment to the WAN port, and connect the computer to any of the LAN ports. Connect the power adapter from the router to a 220V power supply. Go to the Start menu - Control Panel - Network Connections - Local Area Connection - Properties - Internet Protocol (TCP / IP) - Properties - Check the box "Obtain an IP address automatically"

The rights and obligations under this Agreement cannot be assigned by you, and any attempted assignment is null and void. This Agreement binds and secures for the benefit of the parties and their successors and the permitted appointments. In the event of any litigation between the parties arising out of or related to this Agreement, the prevailing party shall have the right to recover, in addition to any other relief or compensation granted to it, its costs and expenses incurred in any such proceeding.

2. Open Internet Еxplorer or any other browser, type 192.168.1.1 in the address bar and press "Enter"

3. In the "User" field, enter "admin". In the field "Password" also enter "admin", click "OK"

4. Go to the Network tab, select WAN

5. Fill in the fields as follows: Connection type - PPPoE / Russia PPPoE; Next, enter your username and password; WAN connection mode - Automatic connection. Leave the rest of the fields unchanged. Click the "Save" button.

Setting up Wi-Fi on the router
5.1 To configure Wi-Fi, go to the "Wireless mode" tab, select "Wireless mode settings". Fill in the fields as follows: Wireless network name - enter the name of your wireless network, for example My_wifi, Region - Ukraine, Channel - Auto. Leave the rest of the fields unchanged. Click the "Save" button


5.2 Next, you need to configure the security of the Wi-Fi network. Go to the "Wireless" tab, select "Wireless Security". Check the radio button next to WPA / WPA2 - Personal (Recommended) Fill in the fields as follows: Version, Encryption - Automatic, PSK Password - password to access your wireless network (at least eight characters). Next, click the "Save" button, then to reboot, click "click here"


5.3 Wait for the router to save the settings and reboot, usually it takes 1-2 minutes. Once downloaded, the wireless network is ready for use.

If you are in the United States, Section 17 applies to you. If you are located outside the United States, or if Section 17 does not apply to you or otherwise cannot be applied in a court of competent jurisdiction, then Section 18 applies to you.

Any action arising out of or relating to this Agreement may only be brought before the appropriate state or federal court in Los Angeles, California and Belkin, and you unconditionally agree to the jurisdiction of such courts and venues in Los Angeles, California. In addition, Belkin can seek injunctive relief in any court with jurisdiction to enforce his intellectual property rights.

They asked me to tell you how to set up a computer on the Internet via an ADSL modem (we configure it in the same way with a router) and work on a computer on a local network via a local router.

We will configure the network in Windows XP, with Windows 7 in the same way.

Given:
1. Local network 10.10.0.0/24 with router 10.10.0.1
2. ADSL modem from the provider configured by a router with IP 192.168.0.1 is included in the switch of the local network, that is, it distributes the Internet to the entire subnet 192.168.0.0/24 from whom it will be registered as the main gateway.

Installing the network adapter driver

Each of the United Nations Convention on Contracts for the International Sale of Goods and the United Nations Convention on the Limitation of the Period of the International Sale of Goods are hereby expressly excluded and will not apply to this Agreement. These third party trademarks are the property of their respective owners.

Understanding a Network Bridge In the "real world", a bridge is a structure that spans the distance between two points and provides a link or connection from one place to another. In networking terminology, a bridge serves a similar function in that it spans two local area networks and allows packets to be received from one to the other.

The task of configuring the operation of computers on the Internet while working in a local network through a router 10.10.0.1 and other networks behind the router.

The first thing we do is turn off the DHCP server in the modem. This is so that the modem does not distribute IP in the local network, we will register all the IPs with our hands.
Second, open the network card settings and write:

How a bridge differs from a router. Bridges and routers are network connection devices that connect network segments together. However, there are a number of differences between the two. Routers are more complex devices than bridges. Bridges can be combined with routers to produce a bruter.

The bridge also recovers data as it forwards, but it does so at the packet level, not at the signal level. Relays cannot connect segments that use different media access methods, but some types of bridges, called translatable bridges, can. Most importantly, repeaters transmit everything without treating addresses or distinguishing addresses as bridges.

A window for entering parameters will open, Enter the IP address, mask, gateway and DNS in the settings of the network card and go to additional settings:

Bridging You can use a bridge to segment your network to reduce traffic congestion. The first time a message is sent to a specific address, the bridge sends it to all computers on both sides. This way it finds out which side the address belongs to and adds the address to its table. Port numbers are used to represent different segments. Then, when subsequent messages are sent to that address, the bridge knows to forward the packet to the appropriate segment if the destination address is on a different segment from the source, or if the source and destination computers are on the same segment, and not to forward the packet across the bridge.

IP: 192.168.0.5
Mask: 255.255.255.0
Main gate: 192.168.0.1
DNS:192.168.0.1

For each configured computer, you must specify a different IP address, for example 192.168.0.5, 192.168.0.6, 192.168.0.7 etc.

After filling in all the fields as in the screenshot, press the button Additionally:

Hence, unnecessary traffic does not cross the bridge. Bridges can connect two network segments that use different media into the same subnet as long as they use the same network protocol. You can use a bridge instead of buying a wireless access point.

The bridge automates the process of transferring data from one media type to another without requiring you to configure separate subnets for each media type and manually configure packet forwarding between subnets. Adapters on which certain features such as Internet Connection Firewall and Internet Sharing are enabled cannot be part of the bridge. Look under the hood of the network bridge. The bridge puts the network adapters that belong to it in "promiscuous mode". This means that the adapter can capture all transmitted packets, not just those that are addressed to it.

To do this, we just add everything that goes on the 10.0.0.0/8 network go through the local router 10.10.0.1, for this we press Start - Run and enter the command ::

Route add -p 10.0.0.0 mask 255.0.0.0 10.10.0.1

To test static persistent routes, run the command:

In order to prevent the console window from closing during execution, run the command Start - Run - cmd and in the window that opens, we are already executing the above commands.

Click the Start button. The control panel window will open. Click Switch to Classic View that appears in the navigation bar on the left side of the Control Panel window if the control panels are not already in Classic View. When the control panel window is in classic view, the Network Connections menu will be displayed in the pane on the right.

Connecting and configuring WiFi in Windows XP: Video

Double-click the Network Connections icon in Control Panel to open the Network Connections window. Find the wireless connection whose router settings you want to find in the Network Connections window. Right click on the connection. This will open the Wireless Network Connection window for that connection.

If you have other addresses, just change to yours by analogy.

The network configuration is complete. Sergey Lazarenko was with you.

Let's take a short break and watch a short video clip.

In dannom rukovodstve rasskazyvaetsya o tom, kak soedinit kompyutera large screen with WIFI adapterami in operatsionnoy sisteme Windows XP in odnu obschuyu set for obmena informatsiey mezhdu these kompyuterami or sovmestnogo ispolzovaniya interneta to kotoromu podklyuchen tolko Shout of nix.

So that set up wi-fi network we only need two computers equipped with WIFI adapters. The mode in which the connection will take place is called Ad-Hoc. We will also try to understand How to set up a wi-fi network for shared use of the Internet which is connected only to one computer ..

Setting up a wi-fi network between two laptops

The settings are practically all the same for both computers, therefore, in the article separately, both computers will be considered only in the case if this is a setup. You can start setting up a wi-fi network from any computer.

To get started, we need to open the “Network Connection Properties” tab. Depending on the settings of Windows XP, this can be accessed in several different ways. All possible options are considered in the figures below.

Option 1 via mains connection from the worktable icon.

Option 2 via mains connection in the start menu (classic menu)

Option 3 in the network connection via the “Start” button (“Start” menu in XP style)

Variant 4 in the properties of the network connection via the "start" button and the control panel.

All 4 of the above described options lead to one result, shown below.

Next If your WIFI adapter is turned off, turn it on “programmatically” as shown in the figure. Since the WIFI network card can also be turned off via the button on the laptop itself, you must make sure that WIFI is also turned on in this way! Otherwise, we will not be able to configure a wi-fi network between two computers.

How to set up wi-fi on Windows XP? We go to the properties of the network connection, as shown in the image below:

Fig. 1. Opening the properties of a network connection.

We configure IP addresses in our local network.

Let us dwell in more detail at this stage, since at this point there are differences for setting up the First and Second computers

In the tab that opens, we find the field "Internet Protocol TCP / IP", click the "Properties" button.

Fig2. Go to TCP / IP Configuration.

And we configure the IP addresses as shown in Fig. 3 below. (the picture shows the settings for the second computer, for the first see the differences in the text below)

Fig. 3 Configuring IP addressing.

Here it is configured

  • IP address (192.168.0 1 on the first and 192.168.0.2 on the second computer)
  • Subnet mask (255.255.255.0 on both computers)

Two more points are needed only if you need Internet access through the connection of the first computer. Both items are configured only on the second computer. (If shared Internet access is not needed, then these steps are not required to set up a wi-fi network between laptops)

  • The main gateway (specify the ip address of the first computer)
  • Preferred DNS server, The DNS value for each computer will be different, it depends on the Internet provider. You can find out your DNS by looking at the provider's parameters.

After entering this data, press the "OK" button.

Setting up shared Internet access.

How do I set up Internet Sharing? To do this, you need to configure the first computer. Once again, this setting only needs to be done if you want to set up Internet sharing.

Select the "Advanced" tab of the properties of the network adapter and click the checkbox "Allow other network users to use ..."

After clicking the "OK" button, windows should inform us that in this case, communication on the local network may be lost and that ip adress 192.168.0.1 will be assigned (which we have already previously assigned), click again ok. Moreover, WINDOWS will not change the IP address in this case.

Before we click OK, remember this place and how to come here again. The point is that there is a place where we can enable, or disable, or configure Windows Firemaer. In the future, you may need to disable it.

Go to the "Wireless & networks" tab. Go to the wireless networks tab.

View of the "wireless networks" tab.

Click the "Add" button

We carry out all the settings in accordance with the picture.

  • Share name - you can choose any.
  • At the very bottom you need to indicate "This is a direct connection ..."
  • Disable the checkbox “The network key is provided automatically”, after which we will have the opportunity to enter this key manually
  • Enter the Network Key and Key Confirmation. You can enter either a 5 or 13 character key. Enter some 5 letter word (in English) and REMEMBER it. It will be needed to set up a second computer.

We configure automatic connection to the created network.

In order for our two computers to connect to the network by themselves, as soon as they “see” each other, go to the “Connection” tab and put the appropriate checkbox as shown in the figure.

We press the "ok" button, and once again save everything. This completes the network setup on the first computer. We do everything exactly the same on the second, with the exception of the differences mentioned.

Testing, debugging, internet connection.

Is there a WI-FI network? Once you finish setting up WIFI on both computers, you should have a wireless network up. An indicator that a WIFI connection has occurred is the presence of a wireless connection icon in the taskbar on the right. If you have problems at this stage, check:

  • Is the WIFI adapter included in the hardware?
  • Have you followed all the points of the current instructions exactly? Did you enter the key correctly on both computers?

Is there an IP connection?

We try to ping to the address 192.168.0.2 from the computer 192.168.0.1. To do this, on the First computer, press the "Start" button and in the "Run" menu, write CMD and press ok.

Launching CMD.

In the black window that appears, write ping 192.168.0.2 and press ENTER.

Ping to 192.168.0.2 from 192.168.0.1.

If you see, the same as in the figure above, then you have no ping to the address 192.168.0.2. Try ping 192.168.0.1 from the Second computer. Attention, it is important not to be confused here. Otherwise, if you ping from the second computer to the address 192.168.0.2, then you will actually ping the same computer, and the result will not show you anything.

The presence of a ping in at least one direction means that your WIFI is configured correctly. And all problems can only be due to the Firewall settings or incorrect IP settings (for example, a gateway or DNS).

In this section, we answered the question "how to set up a wi-fi network between two computers".

In general, the task of configuring Wi-Fi in Windows XP is divided into two main tasks. The first is the task of setting up a connection to an existing Wi-Fi network, for example, to a router that distributes wireless Internet or to another computer.

As part of the second task of configuring Wi-Fi in Windows XP, the task of organizing an access point from a personal computer is solved so that other computers and other devices can receive the Internet. Within the framework of this article, we will restrict ourselves to considering only the first task, since the second is the lot of system administrators, for whom it is worth writing separate articles. Here we will restrict ourselves only to the user experience of connecting to wireless networks and their settings in Windows XP.

Connecting to an existing Wi-Fi network

If you want to configure the laptop's connection to an existing Wi-Fi network, first, find the corresponding button on the laptop case, which turns on the Wi-Fi adapter built into the laptop. It usually looks like the picture shown.

After that, a light on the laptop case should light up, signaling that the Wi-Fi module is turned on. Usually, the exact combination of buttons is described in the notebook documentation. Next, go to Start, go to "Control Panel", where select "Wireless Network Connection", which should be enabled. You should do the same for setting up Wi-Fi in a stationary computer immediately after installing the Wi-Fi module. If the Wi-Fi module is not detected, find it in the device manager in the "Network cards" section.


If it is not found there, then you have not installed the driver. Find them on the website of the manufacturer of your adapter or on the disc that came with it.

To successfully connect to Wi-fi, you need to know:

  1. Network name
  2. Network password
  3. Network details (ip-address, gateway, DNS-server addresses)

Sometimes, in Windows XP, a special program may be responsible for connecting the wireless network. It can be supplied with a laptop or Wi-Fi adapter and allows you to configure the necessary Wi-Fi connection. The usual given utility is represented by an icon next to the clock. However, these programs are not always stable in operation, so if it is possible to configure your wireless connection without using these utilities, use it. You can always force your operating system to configure your connection directly - for this you need to go to the adapter properties in the "Network Connections", go to the "Wireless Networks" tab and check the "Use Windows to configure the network" box. This will allow you to configure your network specifically for Windows.

In this case, you need to configure the so-called SSID.

To do this, go to start- "Control Panel",

where go to the "Network Connections" item.
There, double-click on the item "Wireless network connection",
where you can select the name of the desired Wi-Fi network to which you need to connect. The green bars next to its name indicate the signal strength - the more the better.

If your chosen wireless network is protected by a password, Windows XP will ask you for it. Enter it and click "connect".

After that, the operating system itself will take all the necessary steps to connect to this network. In the future, you will not need to enter the password when connecting to this network, of course, before changing it. In fact, this is the whole Wi-Fi setup in Windows XP.
However, there are situations when you need to connect to a network with a hidden name. In this case, you must manually create the required profile yourself. To do this, go to Start, go to the "Control Panel", there go to the "Network Connections" item. After that, click on your "Wireless Network Connection" with the right mouse button, select "Properties",

where you need to open the "Wireless networks" tab.
Pay attention to the "add" button - click on it, and then put a tick on the "Connect even if the network is not broadcasting" item, and also select the types of authentication and encryption.

You also need to set a network name.

In some cases, a specific problem may arise when the computer cannot connect to a Wi-Fi network - when the router is configured in such a way that it does not distribute an IP address via DHCP. We will not go into technical details, we only note that the task of setting up the network in this case becomes more complicated. To solve the problem, you need to go to Start, find the "Control Panel" there, select "Network Connections" in it, and then right-click on your connection. - "Properties". There find the item "Internet Protocol (TCP-IP)", select it and click "Properties". After that, you will have to manually register the parameters of your wireless network. Often, they are:

  • IP address: 192.168.1.111
  • Subnet mask: 255.255.255.0
  • Default gateway: 192.168.1.1
  • Preferred DNS Server: 192.168.1.1

Or like this:

  • IP address: 192.168.0.111
  • Subnet mask: 255.255.255.0
  • Default gateway: 192.168.0.1
  • Preferred DNS Server: 192.168.0.1

However, when rigidly setting these parameters, you should not forget to disable them if you work in places with public wireless networks - otherwise, connection to them will become impossible.

Wi-Fi setup problems

Often, most problems connecting to wireless networks are caused by an incorrectly installed adapter driver or the use of auxiliary utilities for connection. Reinstalling the driver or using Windows XP as a network configuration tool will usually resolve any problems. However, in some specific cases, this solution will not work.

For example, the list of Wi-fi networks displays names, but when connecting to the desired network, an error occurs - perhaps the problem is in the router itself. It makes sense to switch it from Standard to Mixed or Mixed Mode.

It often happens that the Wi-fi connection is constantly disconnected - in this case, the reason may be a low signal level. Increase its power or use another antenna in your router.

The most common problem is the connection to the network occurs, but the Internet does not appear. In this case, configure the TCP / IP protocol and manually enter the necessary ip-addresses and gateway addresses using the method described above.

If you have an Internet connection, but it works poorly and slowly, try browsing the broadcast channels on the router - most routers have this function. Indeed, in most routers, the channel is left by default, and if there are a significant number of such devices in the neighborhood, they can clog the air.

Also, some problems may arise when using various assemblies of Windows XP, for example, Zver. In this case, we can only advise you not to use self-made assemblies, but to use only original and licensed operating systems.

We hope our tips have helped you set up your Wi-Fi network. If our educational program did not help us - do not be discouraged, try to look for advice on the forums, in Google, or ask us.