Phone Connection Mode to Computer. How to connect the phone to the computer: step by step instructions

Now I will teach you how to connect the android phone via USB to a computer as a drive and thus enable data transfer and transfer information without using a flash drive. Very comfortably.

This article is suitable for all brands producing phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, Zte, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question by a specialist at the end of the article.

What is MTP mode and where USB mode

The version of Android 4.4 Kitkat was the ability to install USB connection as a USB flash drive. PC saw the device as a removable disk and provided the same rights: the user could, and perform other actions.

Then in the new versions, the android USB mode was replaced with MTP, in which only the data transfer function remained, and the same formatting does not work.

Configuring the phone connection to USB PC

To control the connection to the computer via USB, it is necessary. To do this, add the "For Developers" section to the Android settings (if not):

1. Open settings.
2. Go to the "About Phone" or "About Device" section.
3. "Assembly number" or "MIUI version".
4. Click on this item until you see a message that you have become a developer (usually grabs 7-10 clicks).

Increase

After the selection settings appear in the settings, you can enable USB debugging. The item is called, so you only need to move the slider to the "Enabled" position and confirm the resolution.

Increase

Now you can connect the device to the computer via USB and select the operation mode. In the latest versions of Android, the most used are:

• MTP - Transferring any files from a computer to the phone and vice versa.
• PTP - Transfer photos, as well as transfer files that are not supported in MTP mode.
• Only charging.

Connection in the USB drive mode

If you can not get used to working with a media player, return to using the USB drive mode. To do this, you will need:

• The installed USB Mass Storage Enabler program.

The use of this method can damage system files. In this case, you will have to reflash Android.

To android connected to a computer as a drive:

1. Run USB Mass Storage Enabler.
2. Give the superuser rights and agree to changing Selinux.
3. If the device is supported, the main application menu will open.
4. Click "Enable USB Mass Storage".

Increase

Now when connecting to a PC, the phone or tablet will be displayed as a drive. To connect in MTP or PTP mode, it is enough to restart the device. After completing the drive mode, go to the application again and disconnect the USB Mass Storage.

Want to know how to make a consistent on the Internet from 500 rubles a day?
Download my free book
=>>

At the moment, very often mobile Internet is unreasonably expensive. In this regard, if there is a home high-speed Internet and smartphone on the Android platform, you can connect via a USB cable.

But it will take advantage of some manipulations with a personal computer. Also, if necessary, you need to find, install a special driver that is suitable for your smartphone.

It must be done to. If it is already installed, then when connecting the phone to a computer, a system window will appear. In it, the user, if necessary, can view the files stored in the smartphone.

Checking the presence of the required driver, proceed to work with PC:

1. First you need to go to the "Local Network" connection. As a rule, the icon for this system window is located in the lower right corner of the screen.
2. In the new system window, click on the right mouse button on the current connection and proceed to the "Properties".
3. After that, select the "Access" section and mark the string where it is indicated "Allow other network users to use the Internet connection".

To solve the question of how to connect the phone to the Internet through a computer via a USB cable, you will need to install a special application, which in this case will perform the role of a binder between the mobile device and PC.

Android Debug Bridge.

The easiest way to connect a mobile device to the Internet through a PC is the Android Debug Bridge. After downloading, the program needs to unzip.

You will also need to enable debugging mode using a USB cable. To do this, you will need to become a developer on the smartphone. Immediately make a reservation it is not difficult.

To get the developer rights on your smartphone you need:

1. Go to the phone settings and select the section "About the phone" or "Phone" (it may be called differently, since it all depends on the model of the smartphone).
2. Then you are looking for a row where the assembly number is specified, click on it 10 times.
3. After that, in the settings you have a new section "Developer", "for developers" or "developer parameters".

After that, you can activate the debugging via USB. Now come back to the program itself. As soon as you unzip it, find and open the Androidtool.exe file.

Then a new system window will appear before you, you need to click on "Refresh". Next, select "SELECT DNS TO Use", mark "DNS" and click on "Connect". As a result, a window with a running line of connection appears before you.

With the correct connection, Connect Done will appear in this window. This will mean that the personal computer can be used as for your smartphone.

At the same time, a record may appear on the phone asking for the rights to the user. Do not be scared, just click on "Allow" and that's it. It is noteworthy that in this case the presence of root rights is required.

Androidtool.

To solve the issue, how to connect the phone to the Internet through a computer via a USB cable you can use the Android utility.

Also, there is a very important point, in this case it is necessary. To do this, you will need to install the Kingo Android Root application on a personal computer.

After that, you need to connect the USB debug mode on your mobile device. You also need to enable permission to install applications from unknown sources.

Now we connect the USB smartphone and turn on the PC installed earlier the application that will independently install the required drivers on the phone.

Upon completion of the installation of the drivers, the red button "root" appears. Press it and expect the end of work. As soon as everything is completed, the program will ask for a reboot of the smartphone.

Now you can safely install and work with the Androidtool application. After running it in the "Android Reverse Terthering" window, click on the "Refresh" button.

Then locate your device using the Select A Device field. Next, choose "DNS", click on "Connect". In the SELECT DNS to Use list, open the Progress window.

It will appear in it. "USB Tunnel Support Suite". If you need to provide root-rights, then you need to click "provide". Thus, an entry that "communication is established" should appear. After that, calmly use the Internet.

Outcome

If you are interested in how to connect the phone to the Internet through a computer via a USB cable, then how it can be seen is not as difficult as it may seem at first glance.

In addition, this option is convenient in a situation ,. It is worth noting that this article features applications that are popular among users. I wish you success!

P.S. I apply the screenshot of my earnings in partner programs. And I remind you that everyone can earn it, even a newcomer! The main thing is to do it right, and therefore learn from those who already earn, that is, in the Internet business professionals.

Take account the list of verified partner programs of 2017, which pay money!


Download Checklist and valuable bonuses for free
=>>

The connection through the USB port today is one of the most popular ways to quickly transfer data. Also, using a USB connection, you can simply charge the connected device. Such functions are in demand, therefore, in our days, almost everyone has one, or even a few, flash drives connected via a USB port of a smartphone or tablet and various accessories (smart watches, MP3 players, etc.), which are also connected to PC.

Naturally, with such a variety of devices, some errors will arise. They are mainly divided into two categories: errors in identifying, about which this article will be, and the formatting errors, which can be read about the solution.

Errors in identification are also divided into two groups: an error in which the USB device is not identified, and the error when the computer does not respond to this after connecting the device.

"USB device is not recognized" - what to do in windows 7, 8

Any computer can suddenly throw out such an unpleasant surprise with any device: USB drives, smartphones, tablets, computer mice, keyboards, accessories, printers, scanners ... with all that you can somehow rule through USB, such a problem may arise, but Almost for any devices, such an error is solved by the same way.

The first thing to be done when Windows has not identified the device, it is to check its serviceability. Connect the gadget to another PC or laptop. If an error remains on another machine, then the whole problem in the device itself (or the cable for which you connect it) and most likely you will not help you already anything other than the campaign to the store for a new analogue.
Also try to connect the device to another USB connector, disconnecting unnecessary equipment. If nothing worked, then go to the next paragraph.

Go to the Device Manager. Press Win + R and enter the DevmGMT.msc command. In the window that opens, try to find your device (it will be either in the "USB controllers", or in "unknown devices). If it happened that it fell into the "Unknown Devices" tab, click on the PCM on it and update the drivers. In the event that the gadget hit "Controllers", then right-click on it again, go to "Properties" - "Driver" - "update". If the update button is not available, then go back to the dispatcher and click Delete. After that, open the "Action" tab and select "Update Equipment Configuration", after selecting your USB device.

The above-mentioned action algorithm usually triggers and when the usual flash drive is not identified, and when when connecting the phone to a computer, the "USB device is not recognized".

The computer does not see a USB flash drive via USB

First, your personal computer most often does not define a flash drive due to the fact that it is faulty. To check this, insert the USB flash drive into another device. If it does not work and not, then boldly buy another flash card.
Secondly, check the connector on dirt. Naturally, if a banal mud hit the flash drive connector, it will work incorrectly.
Thirdly, try inserting a USB flash drive to another connector on a computer (usually several of them).
Next, try formatting your USB flash drive under the computer file system. See which file system on the PC can, go to the properties of the local disk. Now you just need to specify how to specify which file system you need.

The phone is not defined via USB (Android)

The smartphone is usually connected to the PC to transfer data to it and files that are difficult to transfer to another. You connect your smartphone through a special cable, but nothing happens, and Windows does not respond to a new connected device and simply charges it the battery.
But why doesn't the computer sees the phone via USB on Android, only charging and nothing else? How to solve it?

1. If you bought a new smartphone and try to connect it to the old version of the operating system (Windows XP, for example), which is not currently supported, it is necessary to either update to a newer OS, or download the Media Transfer Protocol program from the official Microsoft website, install it And restart PC - everything should earn.

2. If you have several USB ports on your computer, try connecting your smartphone through another port.

3. Try to change the USB cable. Cable malfunctions - one of the possible obstacles to the USB connection.

4. Check the smartphone connector. Remember if you did not drop it into the water?

5. Connect the smartphone to any other device (PC, laptop). If the phone also does not want to work correctly, then the problem is either in it, or in a USB cord. If everything has earned, then the whole problem is in the computer options - go to the next item.

6. Try to stick into the computer another device (USB flash drive, for example). If an error occurs with other flash drives, then go to the "Control Panel" and select "Troubleshooting". In it, click on the "Device Settings". There will be automatic setting.

7. If the computer still does not see the smartphone, only the driver update remains.

Note: The newest phones are now configured by default for data transfer, but for charging. To check which type of USB connection is used, use a simple instruction from screenshots, which is located below.

Problem with the USB Card Connection to Tablet Computer

On some tablets now there is the ability to connect a USB drive. Through a special adapter, you insert the usual USB flash drive, the tablet does not react in any way. So why doesn't the tablet sees USB flash drive through an adapter?

The main reason for this error is different standard file systems. Then you need to format the flash drive in FAT32 (it is under such a system that modern plates are sharpened) through a computer.
If it does not help, you need to get root-right to the device and download the StickMount from Google Play, through which you can install the USB drive virtually after you insert it into the tablet.
If none of the listed ways helped, then think about repairing the tablet.

Hello everyone! Today we will consider several questions at once on how to connect a USB to a computer. First, we will learn to connect any devices to a PC or laptop. And secondly, I will tell you how additional USB ports can be connected to the computer if you lack them for all devices. So let's go!

How to connect a USB cable to a computer?

USB port to date the most common type of device connection to a computer or laptop. Data connector is three - 1.0, 2.0 and 3.0. If the first can now be found only on the oldest computers, then the second and third are used today. In essence, they differ in data rate. And in appearance, what is more important for us - color. USB 2.0 has a black color of the connector and forks, USB 3.0 - blue. You can read more about specifications and differences of standards.

Before connecting a USB wire to a computer, look at the plug of your gadget - if the blue connector is connected to a black port, the device will not use all its high-speed characteristics to the maximum. If the black plug is in blue, then absolutely nothing happens - simply the USB port 3.0 will work on the speed that is maximum for 2.0.

So, we look at the rear panel of your computer, we find the USB port of the same color as the fork, and plug.

After that, the device is either determined by itself in the system, if it is a keyboard, a mouse, a webcam or any more simple and common device, which in Windows already has a driver. Either it will be necessary to install the software that is attached to the CD device.

How to connect additional USB ports to a computer?

On any modern motherboard there are already built-in USB ports - both 2.0 and 3.0. However, we usually connect so much of any different reprocess that they can easily miss, for example, in order to connect a flash drive or an external disk and transfer fresh photos to it.

Connecting USB Planks on the back panel

What to do? There are two ways. The first, preferred - to purchase a separate bar with USB ports and paste it into additional slots available on the back of the case - in the same where we are secure video or audio card, wireless adapter, and other components connected directly to the board. It looks like this:

In order to implement this task, it is necessary that the motherboard supports connecting additional USB ports. It is possible to determine this by the presence on the system board of connectors, marked USB or USB 3.

Connectors for USB 3.0 large, have many contacts and are designed to connect two ports at once in the same fork.

USB 2.0 less and each of them can be connected by 2 ports of the folder.

Accordingly, we look at the presence of such connectors on the motherboard, we buy the appropriate strips, fix them in the back of the case and connect to their connectors.

Connecting a USB Block Ports instead of Flopic

Another kind of such a way to increase the number of ports is a special unit with USB, which is inserted into the front of the case instead of the old digital - Flopic 3.5

Options for execution of such a block set. For example, combined to connect USB 2.0 and 3.0

And in the following example of the USB 2.0 ports are combined with connectors for connecting microphone and headphones

Connecting such a block occurs in the same way as the above described plank - to the appropriate connectors on the motherboard.

External USB Hub

Finally, another option for increasing the number of ports is to buy an external USB hub. However, there are a number of minuses, because of which I would not connect any serious equipment through it, but would use it only for flash drives or, in the extreme case, mice.

Since this is a hub, the whole load from several ports is on one single computer, to which it is connected. Because of this overload, certain devices can periodically fall off, which is not GUT. If you connect a hard disk to USB hub, then the electricity supplied through it may not be enough for its operation. Therefore, the specifically is left only for light fast food - flash drives.

Important! In this instruction, we are talking about Android devices, that is, ways to connect the phone to the Internet through a computer via a USB cable to another OS do not work.

Often there is a problem - there is no Internet on the phone and there is no possibility to use Wi-Fi, but there is a computer with a working network. This article describes a simple solution - connecting through the wire.

All that will be required - USB cable, wire for charging the device. No programs and difficulties.

Unfortunately, the iPhone and Windows Phone has no function destination to communicate with the worldwide web. Of course, there are some programs aimed at creating a bridge between computers and devices with the above-mentioned OS. However, this method does not affect.

Connect the phone using the wire. It is worth ensuring that the laptop recognizes the smartphone. If everything is in order, then when contacting the PC, there is a characteristic sound, and a device will be displayed in the disks folder.

If the computer "does not see" android, although the device shows a successful connection, then you need to install the driver. This program helps PCs to interact with the gadget. Driver be sure to search for your model, others are most likely not suitable.

After installation, the phone will be displayed, but if this does not happen, it is necessary to check the power of the cable and the USB PC connector.

How to connect the phone to the Internet via a computer via USB cable

Go to Android Gadget Settings. In the first group of settings, you must choose the "still" deposit. Among the proposed items will need a USB Internet. Sometimes the name of the tab is different, but the meaning is the same. You need to enable this item.

Then go on manipulation with the computer. First, it is important to enter the network management center and shared access. Go there it will turn out, PCM on the web connections icon in the taskbar, usually on the right. If the Find button does not leave, that is, an alternative:

• Start.
• Control Panel.
• Categories.
• Net.

Then click Network Management Center and Common Access. In addition to the main block of hyperlink there are several in the left part of the menu. Among them, you need to contact them directly in the "Changing the Adapter Parameters".

In the open dialog box, the current connections with servers are shown. The list of titles also contains the Internet through which the PC itself works. It is not difficult to find it, on a wired or wireless type. In addition, there is a web created by the Android device. It is better to rename it.

Right-click on the connection icon related to the PC, go to the "Access" panel. Next enable the "Allow other users to use the connection of this computer".

If there are three or more active networks at the PC, it will be necessary to specify, specifically, to whom access is available. Select important from the list of networks of the one that created a smartphone, and exit by choosing Save.

Go to the properties of the smartphone network and in the window, without moving to other tabs, double-click on the "Internet version 4" protocol. In the default fields, set addresses will be entered. The first line will have to be changed at 192.168.0.1.

Most likely, the address is different. In this case, first check the box opposite "Automatic IP Getting", exit, preserved. Then return to the properties, in the same tab of the protocol and enter the number of the number above in the first field.

Now, when you click on the second string, another address is entered. If this happens, you need to press the Tab key. Next, you must close the window, saving the changes.

After all operations, the phone will be successfully connected to the server. If you need to turn off the cable and to connect it, then the procedure will be necessary to partially re-perform. But, given the fact that it takes half a minute, nothing complicated.