entranceThe software for the phone is not installed. General driver installation guidelines for most Android devices
Sometimes when trying to use a USB flash drive, mouse or any other gadget that connects via USB, an error occurs that the device cannot be started with code 10.
In some cases, to see it, you need to go to the "Dispatcher" and, again, open in the section "Network adapters". This is done using the search.
Consider all the ways that can help in solving this error.
Ccontent:
Method number 1. Restart
Often, simple methods, to the impossibility, help in solving a problem, namely:
- Remove the USB flash drive or other device from the USB port and reinsert it. Often, minor system conflicts prevent the drive from being freely detected by the PC. This is especially true for other operating systems older than the G8.
- Insert the storage medium into another port. It also happens that this port has stopped working correctly. This does not necessarily mean that he had any serious problems. It happens. After a while, try using that port again.
Of course, it is best if this procedure is successful and they are found on the Internet.
In this case, you will only have to follow the instructions of the installer in order to start them and continue to safely use your own, and so on.
If you can’t find them, you will need to do it yourself.
“But where can I find them?”
Usually they are stored on the servers of the manufacturer of your equipment. You can find them on official sites.
When they are found, in the window shown in Figure 4, select the second option, “Search for drivers on this computer”. If the downloaded files are suitable, they will be installed.
Method number 3. Work with the registry
Also, sometimes situations arise when some residual or simply incorrectly working files do not allow it to start normally.
In this case, the best. This is easiest to do with CCleaner.
Step by step this process as follows:
- Download and install CCleaner (link) on your PC or laptop. Run it. Click on the "Registry" tab on the left.
- Mark wherever you can in the column "Registry Integrity".
- Click the "Trouble Shooting" button. This process will start. It will take a little time for it to end.
- Click on the button “Fix ...” - then it will become available.
You can perform this task with the help of a large number of other good programs. For example, there is an Advanced SystemCare. Her use even simpler:
1 Download and install Advanced SystemCare (link) on your PC. Run it. Go to tab Cleaning and optimization up.
2 Mark the box below Registry cleaning.
3 Press the button Start in the middle. Cleaning starts. Usually it does not take much time either.
Method number 4. Renaming a flash drive
If we are talking about, it is likely that the system is simply already registered with the same name. Because of this, of course, a conflict arises.
Therefore, it is logical that the letter is desirable to change. This is done as follows:
- Go to "Control Panel" and choose there "Administration".
Hint: If this section is not visible, install "Small icons" in the upper right corner. Then everything will fall into place.
- In the window that opens, select "Computer Management". To open this program, you need to click on it twice.
“Computer Management” in the “Administration” section
- In the menu on the left, click Disk Management. On your USB flash drive, which is not detected, right-click. In the dropdown menu, click "Change the letter ...".
- In the new window, you need to click the "Change ..." button again.
- Then it remains to select the desired letter near the inscription "Assign a drive letter (A-Z)" and click OK.
After that, remove it from the PC and reinsert it. Everything should work well.
If all else fails, please write in the comments about this.
Sometimes shutdown and antivirus before also helps. This is described in the video below.
Good day and other differences, dear friends, acquaintances, readers, admirers and other personalities.
Windows 10 does not cease to please us with updates and next problems with them, then it breaks our ears, then the tail falls off, then the Intel driver crashes and falls out the problem "" for everyone and everything, then the cameras on the laptops fall off, then an error appears, then something yet.
This time, many encountered a problem that is stated in the title, namely, an error 0x800f0217 and / or with the fact that the connected phone / player / other USB- the device simply refuses to detect or work normally (for colleagues, for example, it simply "blinked" in the explorer).
Today I will briefly tell you how to actually treat this.
Go.
We treat USB device detection in Windows 10 and error 0x800f0217 when updating
Actually, the problem is traditionally for Miscrosoftin the driver Mtp. Moreover, at first it breaks it, then it cannot update and spits in its own updater with the aforementioned problem 0x800f0217 (screenshot clickable):
It is treated with pens, namely, for starters, actually, we go to the control panel (for which we enter the phrase "Control Panel" in Explorer):
In the device manager, most likely, you will see an unknown device and / or the name of your phone / player / something (depending on what you’ve connected) with an exclamation mark or unknown USB-device:
Actually, we poke it a couple of times with the mouse button, and then select " Update driver"where, in the next step, select" Search for drivers on this computer":
After which, in the list that appears, we will need to select the " Mobile devices"and then" USB MTP device":
After which the phone / player or whatever you have, in fact, should appear in the list of devices (and in Explorer Windows) under its own name:
Well, or just like a mapped drive / flash drive (depending on what the problem was).
By the way, again, depending on what the problem was with, at the stage where we chose " Mobile devices"you can select items like" USB controllers" or " USB function controllers" or " / iPhone device"and so on, how to treat problems of a system of a similar type with other devices (or all the same, in case the described option did not help).
So it goes.
Afterword
In a nutshell, somehow it’s like that. We hope that the article will be useful to someone once and save valuable time, as well as no less invaluable nerves. By the way, whatever one may say, dozens of updates really benefit her, despite the limitless glitches with drivers.
As always, if you have any questions, thoughts, additions and all that jazz, then welcome to comment on this post.
Hello everyone, dear readers and smartphone users. Today I will tell you what to do if the error “USB MTP device failure” occurs when connecting your smartphone to a personal computer. Below you can see a screenshot of this error. If you have the same problem, then read on.
The “USB MTP device failure” error can occur for several reasons, here are some of them:
- Problem with the MTP driver. This sometimes happens, but not on all computers. This problem is fixed very quickly and easily, below I will describe it in more detail;
- Incorrect settings in the device itself. As practice shows, this reason occurs in 1% of cases, but nevertheless it is possible for you that it is the cause of the error;
- Outdated drivers. This problem also has a place to be, but, like the previous ones, this cause of the error is eliminated by simply updating the driver for your operating system.
So, we sorted out the reasons, now let's get down to fixing this problem. Let's start in order, from the most working and common method to eliminate an unpleasant error.
Method 1
Now reconnect your mobile device to the personal computer and check whether the error that occurred earlier has disappeared.
Method 2
If the previous method did not help, then let's try to delve into the settings of the mobile device itself. Follow these steps:
Important: if the development item is not visible, then do the following: go to the "About the device" section and click on the build number about 10 times. Thus, you activate the item “Development”.
Method 3
As I said above, this method is also simple and clear as the previous ones. It consists of a banal driver update. In order for everything to go as successfully as possible, follow these steps:
Now try reconnecting your mobile Android gadget to a personal computer and check if the USB error has disappeared.
If the article was useful to you, then you can thank the author of the article by publishing a link to this material in your social network accounts, for this, click one of the sharing buttons below. Do not forget to add this resource to your bookmarks, I think it will come in handy more than once during the operation of your Android device. See you in the following undoubtedly useful materials.
Samsung Electronics has announced the start of mass production of the market's first stereoscopic flash memory chip called 3D Vertical NAND (V-NAND). Chips designed to replace traditional NAND solutions are developed using a completely new technology and will soon be implemented in a number of devices (consumer electronics, embedded systems and storage, as well as in SSDs). According to the manufacturer, the new products will be able to provide unprecedented performance, thanks to a higher cell density.
Philips will soon introduce the 40-inch BDM4037UW widescreen monitor. The novelty is distinguished by a curved screen (angle of curvature - 3000R) and Ultra HD resolution (3840x2160). The model is based on the VA / TPV matrix, which provides wide viewing angles (178/178 degrees) and a fast response of 4 ms.
The Philips BDM4037UW monitor is characterized by a high contrast index: 4000: 1 (static) and 20M: 1 (dynamic). The maximum brightness level of the screen is 300 cd / m2. One of the features of the model is support for picture-in-picture and picture-by-picture display modes. On the …
Digital Storm has expanded its product line with a new Virtue gaming computer that supports the recently released Intel Haswell platform. This model is an attempt by developers to present on the market a worthy alternative to standard tower systems. According to Digital Storm, Virtue has an original design and offers exclusive upgrade options, which most PC competitors cannot offer.
Despite its modest dimensions (17.7x8.3x17.3 inches), the PC case is ready to take on board full-sized graphics adapters and a whole block ...
Older Android devices support USB mass storage for transferring files to and from the computer. Modern Android devices use the MTP and PTP protocols - you can choose either of two.
To select the USB connection protocol, open the Settings application, press Memory, then the menu button and select the USB connection to the computer. When connecting the device to the computer via USB, the protocol used by it is displayed in the notification.
Why modern Android devices do not support USB mass storage
USB mass storage — also known as the “USB mass storage class device” —is the method by which older versions of Android allowed a computer to access its memory. When connecting an Android device to a computer, I had to press the “Connect memory to computer” button so that the device’s memory
Android has become available to the computer via USB mass storage. When disconnecting from the computer, you should click the “Disconnect USB memory” button.
USB mass storage is the standard protocol used by flash drives, external hard drives, SD memory cards and other USB drives. The drive becomes fully accessible to the computer, just like an internal drive.
This work scheme had flaws. The device connecting to the memory required exclusive access to it. The memory when connected to a computer was disconnected from the Android operating system. Files and applications stored on a memory card or USB drive became unavailable when connected to a computer.
System files need to be stored somewhere; they cannot be disconnected from the device, so Android devices contain a separate / data section for “system memory” and a / sdcard section for “USB memory” on the same internal drive. Android installs applications and system files in / data, while user data is stored in the / sdcard section.
A hard partition led to a lack of space for applications and an excess of space for data. Partition size cannot be changed without obtaining superuser rights on the device - the manufacturer at the factory chooses the size for each partition.
Since the file system was to be accessed from a Windows computer, it was formatted for FAT. Microsoft holds patents for FAT, which is an older and slower file system without a modern permission system. Android currently uses the new ext4 file system for all partitions because Windows does not have to read them directly.
Connecting an Android phone or tablet to a computer as a typical USB drive is convenient, but it has too many drawbacks, so new Android devices use other USB connection protocols.
MTP - data storage device
MTP stands for “Data Protocol.” Android using this protocol is presented to the computer as a "data storage device." The data transfer protocol has been promoted as a standardized protocol for transferring audio files to digital music players using Windows Media Player and similar programs. It was supposed to allow other media companies to compete with the Apple iPod and iTunes.
This protocol is very different from USB mass storage. Instead of exposing the file system of an Android device for Windows, MTP works at the file level. Android device does not provide all its memory for Windows. Instead, the computer sends a request to the connected device, and it responds with a list of files and directories. The computer can download the file by requesting it from the device that will send the file over the connection. If the computer sends the file to the device, the latter saves it. When a file is deleted, the computer sends a signal to the device, ordering the file to be deleted, which the device does.
Android chooses which files to show and hide the system files so that they cannot be seen or changed. If you try to delete or edit an immutable file, the device will reject the request and an error message will appear.
The computer does not need exclusive access to the drive, so there is no need to connect memory, disconnect it, or start separate partitions for different types of data. Android can use ext4 or any other file system. Windows is not required to understand the Android file system.
In fact, MTP works very similar to USB mass storage. For example, an MTP device is shown in Explorer, so you can view and transfer files. Linux also supports MTP through libmtp, which is part of the Linux distribution package. MTP devices are also displayed in the Linux file manager.
Apple Mac OS X does not support MTP at all. iPods, iPads, and iPhones use their own proprietary iTunes sync protocol, so why should they support a competing protocol?
Google provides an Android file transfer application for Mac OS X. It is an MTP client and transfers files on a Mac. Google does not ship this application for other operating systems because they have MTP support.
PTP - Digital Camera
PTP stands for “Image Transfer Protocol”. Using this protocol, Android appears to be a digital camera to the computer.
MTP is based on PTP, but adds additional features. PTP functions like MTP and is used by digital cameras. Any program that captures photos from digital cameras can extract them from an Android phone if PTP mode is selected. PTP is the standard protocol for interfacing with digital cameras.
In this mode, the Android device will work with digital camera applications that support PTP, but not MTP. Mac OS X supports PTP, so you can use it to transfer photos from an Android device to a Mac via a USB connection without special software.
In the case of an old Android device, you will have to use a massive USB memory. New devices allow you to choose between MTP and PTP -PTP is needed for programs that support only it.
If your device has a removable memory card, you can remove it and insert it directly into the computer’s memory card slot. The memory card will appear to the computer under the guise of a drive, which means that you can access all the files on it, run software to restore files and do everything else that MTP does not allow.