Menu
Is free
check in
the main  /  Advice / How to reset the tablet to factory settings. How to reset the tablet to factory settings How to reset the settings on texet

How to reset your tablet to factory settings. How to reset the tablet to factory settings How to reset the settings on texet

Hard Reset, aka Hard Reset, is done in two main ways. Regardless of the method chosen, take care of backing up your personal information, and also remove the memory card from the tablet and, just in case, the SIM card, if any.

1.Using the menu (if the tablet turns on)

If the tablet is fully functional, the pattern is not locked, and you have the opportunity to get into the settings - be sure to use this method to make a Hard Reset (hard reset) and demolish the user (user) settings to the factory settings.

1. All you need to do is go to the settings and find the item Recovery and reset.

2. Then you need to select the item Reset.

4. As a result, Android will issue the last warning that you want to demolish everything, and you will not be able to restore anything. If you haven't changed your mind, choose a team Erase everything.

5. The tablet will reboot, and to show you the full depth of the process, you will see a splash screen showing atoms and molecules spinning in the belly of the Android robot.

6. This is normal, after a couple of minutes the splash screen will disappear, the tablet will start with such factory settings and applications as if you just brought it from the store.

2. Through the Recovery menu (if the tablet does not turn on)

If a software failure occurs in the tablet, it stops starting, "eternal loading" is in progress, or the device is locked with a graphic key - you have only one way out - to get into Recovery mode, ie. recovery mode. The Recovery menu can only be accessed when the tablet is turned off. For this, a special combination of simultaneously or sequentially pressed physical buttons on the tablet is used, which are located on the body of the device. These are usually the volume +/- rocker, power buttons, and / or Home key.The general procedure is as follows:

1. Turn off the tablet. The battery must be fully charged. If you are not sure of a full charge, or if the battery is weak, it is better to carry out all the manipulations by connecting the tablet to the network

2. We hold down the key combination (examples of such combinations for your device model will be below), and wait until the Recovery mode opens

3. Move through the menu using the volume rocker (in some tablets, touch control is possible). Choosing a team wipe data / factory reset(translation: erase base / factory reset)... To do this, you need to press with your finger, if the control is touch, or with the power key, which in this case serves as a button OK.

5. After that you need to give a reboot command. To do this, select the item reboot system now(translation: reboot system now)

6. The tablet will think a little, all data and settings will be erased, and it will turn on itself.

It is worth noting that each tablet manufacturer sets its own set of keys to access the Recovery menu, so only general methods were collected that are relevant for different brands of devices.

Attention! In the descriptions of the options for how to get into the Recovery, I will mention that the reset is carried out according to the standard, general procedure, or according to the blank. It means that you will need to use the blank with the photo described above.

How to make Hard Reset on tablets from different manufacturers:

1) Samsung

Method number 1

  • At the same time we hold down the buttons: "Home" - the central button, the volume change key "+", and the power key.
  • We are waiting for a couple of seconds when the Samsung logo appears, then we wait until Recovery mode starts.
  • Let go of the keys that were held down earlier.
  • Using the volume +/- keys, go to the wipe datafactory reset line. To select an item, we make a short press on the power key. Then we do everything according to the preparation.

Method number 2, if there is no Home button, or when the keyboard shortcut does not work

  • We hold down two keys: volume down “-”, and power
  • As soon as you see the Samsung logo, you can release the power key. At the same time, hold the volume button. When a recumbent Android appears with an exclamation mark, you can release the button
  • We do Hard reset (hard reset) according to the standard procedure

2) Asus

Method number 1

  • Hold down the power and volume down buttons at the same time
  • Release the keys when the recovery menu appears
  • In the menu, look for the Factory Reset line, select it with the power button. We are waiting for the operation to complete and reboot the tablet.

Method number 2

  • Simultaneously hold down the power key and the volume down rocker
  • Wait until small text appears at the top of the screen, then release the keys
  • As soon as you see the inscription Wipe Data, immediately press the volume key once (the main thing is to do this without delay). We are waiting for the reboot, we are using it.

3) Lenovo

Method number 1

  • It is necessary to hold down two more simultaneously with the power key - volume control (i.e. press the rocker in the middle), and hold for a few seconds
  • Then just release these buttons, and make a single press on the volume down or up rocker
  • We are looking for the Wipe data / Factory reset item, select it with the power key, and wait until the reset process is over.

Method number 2

  • Press the power key and hold until you feel a slight vibration
  • Immediately after that, you need to quickly press the volume up key several times (it may not work the first time)
  • The Recovery menu will appear, then we reset using the standard procedure

Method number 3

  • Hold down the volume and power keys at the same time
  • We release only when the Lenovo logo appears
  • When you wait for the recovery menu to load, follow the standard procedure using the template

4) Prestigio

Method number 1 (works in most cases)

  • Press the volume rocker up and the power button at the same time
  • Letting go when the Android logo appears
  • After the appearance of the recovery, we reset according to the standard

Method number 2

  • Together with the power key, simultaneously hold down the volume down rocker
  • Wait for the tablet to start, after which the power button can be released, do not release the volume rocker
  • When the recumbent Android appears, release the key, and immediately press the volume rocker fully. (That is, decreasing and increasing volume at the same time). If nothing happened, repeat the procedure again until it works.
  • If you're lucky, you will be taken to the Recovery menu, and then everything is as usual

5) Texet

Method number 1

  • The rocker for increasing the volume “+” must be pressed simultaneously with the power button
  • When the tablet reacts with vibration, you can release the power rocker, continue to hold the volume control button
  • As soon as the menu appears, the button can be released
  • Further according to the standard

Method number 2

  • Press the "Home" key simultaneously with the power button
  • When the Android logo appears, release the power key, press it for a couple more seconds. Then press the volume change key
  • Next, we do a reset according to the pattern

Method number 3

  • Simultaneously hold down the Home and Power / Lock buttons. Release "Power" after a couple of seconds, while continuing to hold the "Home" key
  • When you see the Recovery menu, the button can be released and reset according to the standard template.

6) Sony

Method number 1

  • The power and volume up keys must be held down at the same time
  • As soon as the screen turns on, release the power button while simultaneously holding down the entire volume key
  • After the menu appears, the button can be released, and then the standard procedure

Method number 2 (for tablets with a Reset button)

  • Connect the tablet through the charger to the mains, and wait until the green power indicator, which is located near the power button of the device, turns on
  • On the case, we find a hole with a Reset button, and presses there with a thin object, for example a paper clip
  • When the screen is off, hold down and hold the "Power" for a couple of seconds
  • Before the tablet starts to turn on, press the volume up button several times in a row
  • When the recovery menu appears, do a standard reset

7) Huawei

Method number 1

  • Hold down the Power and Down buttons at the same time, and hold for about 10 seconds until the menu appears
  • Resetting the workpiece

Method number 2

  • Hold the volume button in the middle, followed by the power button. Do not release the volume rocker while doing this.
  • Hold for up to 10 seconds until the Android screensaver appears. At this time, you need to release the power key, but the volume button must remain pressed
  • As soon as the image of the Android robot with gears appears, move your finger press from the center of the volume rocker to increase it
  • Release the button only when a green download bar appears
  • Further, all that needs to be done is to observe the process. When everything is demolished and hardreset is done, the tablet will restart.

8) Ainol

  • Hold down two buttons at the same time: power and volume rocker
  • See a green robot on the display - the buttons can be released
  • After that, the Recovery menu should appear. If the miracle does not happen, press the power button once, or on "Home"
  • Further, everything is according to the standard.

9) On Chinese tablets (including no-name)

There are so many Chinese-made tablets that it is simply impossible to describe all the options on how to get into the recovery menu. Try all the methods described above on your tablet - some will work anyway.

Also note that most Chinese devices simply do not have Recovery mode. All that can be done in this case is to find a firmware for your tablet or a program for it, as well as instructions for it, etc. Fill the tablet with pure Android, and it will work again.

How to Hard Reset on a tablet without volume keys

There are devices that nature has deprived of the volume rocker. General advice in this situation:

  1. By typing, try to get into the recovery mode, holding down "Power" and "Home" when the tablet is off. For example, hold down two buttons at the same time and wait. Or like this: hold down the "Home" button. In this case, press (but do not hold down) the power button once, then release the Home key. When the Android splash screen appears, press the Home button again.
  2. Even if you manage to get into the Recovery, there is a problem with navigating the menu. It is solved by connecting a USB keyboard via an OTG cable.
  3. If you still can't get into recovery mode, the most clumsy option is to reflash the tablet.

Please note that this article is not comprehensive information on all tablet models. Therefore, if you did not find the manufacturer of your tablet in the list, try all the above keyboard shortcuts, perhaps some method will work for your device. If you still did not manage to get into Recovery mode, write the model of your tablet in the comments, if possible, we will try to suggest.

Option 1

1. First, the device must be turned off
2. Press the buttons a little Volume + + Power
3. Stop pressing the buttons when the Android logo or logo appears Texet
4. To enter Recovery mode, press Power
5. In the menu, select the item wipe data / factory reset and confirm

6.select Yes - delete all user data and confirm the choice

7. Select the menu item reboot system now in the conclusion, to finish and reboot

8. The reset process is completed after the gadget restarts

Option 2

1. Go to Phone Settings

2. Next item Recovery and reset

3. Then tap on Reset settings

4. Click on the Reset button and agree to the destruction of all personal information
5. After reboot, the reset is complete

teXet TM-4083 factory reset

Attention!
  • When a full factory reset is performed, all personal applications and data that are in memory will be deleted.
  • Videos and images for some operations may not match your particular phone model.
  • In order for a full reset to take place completely, it is desirable to charge the battery about 80%.

Option 1

1. First, you need to turn off the gadget
2. Press the buttons Volume Up and Food for 2-3 seconds
3. When the Android logo appears on the screen, stop clicking on Food
4. Release the pressed Volume Up when appears on the display recovery mode
5. Select wipe data / factory reset by applying Adjusting the Volume and confirm by clicking Turning on

6. Then, in the next menu level, select Yes - delete all user data using Adjusting the Volume and confirm the choice by holding Turning on

7. To complete the reset and reboot, confirm the reboot system now menu item

8. After the gadget restarts, the reset process will complete

Option 2

1. Go to Tablet Settings

2. Next menu item Recovery and reset

3. Then select Reset settings

4. Click on the Reset button and agree to the loss of all personal data
5. After the tablet restarts, the reset process is completed

teXet TM-8044 factory reset

Attention!
  • In order for the reset to be completed, the battery needs to be charged approximately 80%.
  • Videos and images for some items may not exactly match your particular phone model.
  • After performing a hard reset, all of your personal apps and data on your phone's memory will be destroyed.

Option 1

1. First you need to turn off the gadget
2. Press for a few seconds Volume + + Power
3. Stop pressing the buttons when the Android logo or logo appears on the screen Texet
4. Press the button Power to enter Recovery Mode
5.select the wipe data / factory reset item and confirm

6. Then, in the next menu level, select Yes - delete all user data and confirm the choice

7. Click the reboot system now item at the end to complete the reset and reboot process

8. The reset process will complete after the gadget restarts

Option 2

1. Go to Phone Settings

2. Choose Recovery and reset

3. Then click on Reset settings

4. Click on Reset and agree to the destruction of personal data
5. After the gadget restarts, the reset process will complete

teXet TM-4003 factory reset

Attention!
  • In order for the reset to be performed correctly, a battery charge of 80% is desirable.
  • When a hard reset is completed, all your personal applications and data that are in the phone's memory will be lost.
  • Videos and images for some actions may not match your particular phone model.