entranceThe volume button on the iphone 6 crashes. The volume button on the Iphone does not work
iPhone 6S is a smartphone that can be called a diamond to the collection of Apple gadgets. Stylish, bright, equipped with all innovative technical solutions, convenient and durable, such a phone nowadays every person dreams of getting, regardless of age and income. The 6th generation of Apple smartphones is also distinguished by remarkable reliability, it works for a long time and does not cause complaints from the owner.
However, as with any technique, the frequently used parts of the iPhone 6S wear out over time. This is quite natural and there is no way to avoid such a phenomenon. The volume control buttons are especially often worn out, because the owner of the smartphone uses them most often. In addition, it may be necessary to replace the iPhone 6S volume button due to inaccurate handling of the gadget.
Reasons for the breakdown of the volume control button on the iPhone
The need to replace the volume position keys with iPhone smartphone 6S can occur in several basic situations:
- The smartphone fell or was severely hit, external mechanical pressure was exerted on it;
- Moisture got inside the case and the contacts connecting the motherboard, and the volume switching module simply oxidized;
- Sand, dust or small particles of metal got into the volume control mechanism;
- The upper cable is damaged due to inaccurate disassembly or repair of the device.
Signs of need to replace volume buttons
As a rule, the owner of the smartphone can learn about the need to replace the volume buttons on the iPhone 6S by the following signs:
- Toggle buttons do not respond to pressing;
- The keys are stuck in one position, so it is impossible to adjust the sound properly;
- The buttons are triggered every other time, or they are randomly pressed;
- The volume is adjustable in one direction only.
Replacement at the service center: no "home" craftsmen!
The module on which the iPhone 6S volume buttons are located is designed in such a way that it cannot be repaired. Only able to help complete replacement details for a new one. The owner of the smartphone will not be able to do this on his own, or there will be a high probability of damage to the cables and internal parts of the gadget.
Only the masters of our service center will be able to provide qualified assistance in replacing the volume swing on the iPhone 6. In the shortest possible time, the malfunction will be detected and repaired using the latest equipment and original parts.
If the volume button on the iPhone does not work (for example, it jams), do not rush to take the phone to a service center. Before finding out the cost of repairs and paying for the replacement of buttons (switching to silent mode or adjusting the volume), clarify the cause of the malfunction and try to fix it on your own.
The main causes of malfunctions
Initial diagnostics of the device can be done at home. If the volume button on the iPhone does not work - you do not hear a characteristic click, you feel that the mechanism has loosened - most likely, the reason is mechanical damage. Shocks and drops easily damage cables, screen, motherboard and other buttons (volume, lock, power, etc. disable iPhone, switching to silent mode). Often, a smartphone not only does not go into silent mode, but also stops turning on altogether after a strong mechanical impact.
Often, problems with the iPhone occur due to liquid flooding. The penetration of moisture into the interior of the case leads to serious consequences. It is important to dry the phone on time, clean the contacts and tracks, and prevent corrosion, otherwise the problems may not only be with the sound.
The Volume buttons, Power buttons, and Mute buttons do not always break. In some cases, they stop working due to software glitches. For example, when you install unlicensed software on an iPhone or the firmware does not work correctly.
Symptoms of malfunctions:
- the button is broken, does not respond
- volume control (decrease, increase) does not work
- button sticks, works irregularly
If you are sure that the buttons are not working due to a factory defect, immediately contact your Apple authorized service center. Otherwise, try to fix the problem with the iPhone yourself.
Troubleshoot software and adjust settings
In the process of diagnosing the device, you should pay attention to iPhone settings- the phone may be in silent mode. It is also possible that recently installed application causes a lock. Then it's worth doing a hard reboot:
- press "Power" and "Home" at the same time (for iPhone 7, this is how the on / off and volume buttons work, if the latter is not broken)
- hold them until the phone turns off and the Apple logo appears
As a last resort, go through the procedure iOS recovery via iTunes.
Where to go for repairs
Contact the specialists immediately if the software is working properly, and the mechanism for adjusting or turning on the silent mode stopped working due to mechanical damage or flooding. When the warranty period is violated, it is not necessary to waste time on a trip to the service center - it is much more convenient to call the master at home.
The negligence of the iPhone 6 and iPhone 6 Plus can result in numerous physical damage to the device, including the failure of the volume buttons. Their replacement will not cause any special difficulties even for the most unprepared user - for this he only needs detailed manual... Nevertheless, officially, the iPhone 6 and iPhone 6 Plus are non-separable devices, so for some manipulations it will be necessary to use a set of specialized tools, which can be ordered from numerous trading platforms on the Internet.
So how do you replace the volume buttons on the iPhone 6 and iPhone 6 Plus?
1. Unscrew the Pentalobe screws near the Lightining connector:
This procedure can be performed using a dedicated Pentalobe screwdriver set, which can be ordered online. It is worth noting that all the manipulations for disassembling the iPhone and replacing certain of its components should be performed only when the phone is off.
2. Lift the front panel of the device using a suction cup and a sharp-edged plastic tool:
This procedure can be performed using the most ordinary suction cup and the most ordinary mediator. Having firmly pressed the suction cup to the front panel of the device, you need to pry it off with a pick and open it like a book cover.
3. Remove the five screws that secure the front panel of the device:
4. Remove the protective metal plate:
5. Disconnect all cables from the front panel of the device and remove it:
6. Remove the two screws that secure the battery cable:
Manufactured by Phillips, these screws are of a standard design and can be removed from the quality recruitment tools.
7. Remove the protective metal plate:
The unscrewed plate can be removed with tweezers.
8. Disconnect the device battery cable:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
9. Disconnect the Lightning port flex cable of the device:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
10. Unscrew the two screws that secure the bracket for the upper part of the device motherboard cable:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
11. Remove the power and volume buttons bracket:
12. Disconnect the power and volume buttons cables:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
13. Remove the four screws that secure the contact bracket bracket:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
14. Remove the contact bracket bracket:
The unscrewed bracket can be removed with tweezers.
15. Remove the two screws that secure the grounding bracket:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
16. Remove the grounding bracket:
The unscrewed staple can be removed with tweezers.
17. Remove the two screws that secure the corner bracket:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
18. Remove the corner bracket:
The unscrewed bracket can be removed with tweezers.
19. Remove one screw that secures the antenna cable:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
20. Disconnect the antenna cable and camera cable:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
21. Remove the three screws that secure the motherboard:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
22. Remove the motherboard:
23. Remove the stickers securing the battery:
If you have problems with peeling, it may be necessary to warm up the case of the device from the back side. It can be done with a household or industrial hair dryer.
24. Remove the battery:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
25. Remove the film covering the mount with the camera base:
This operation can be performed with tweezers.
26. Unscrew the two screws that secure the main camera:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
27. Remove the main camera of the device:
This operation can be performed with tweezers.
28. Remove one screw that secures the flash bracket:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
29. Remove the device flash bracket:
This operation can be performed with tweezers.
30. Remove the two screws that secure the power button bracket:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
31. Remove the power button, microphone and flash cable:
This procedure should be performed as carefully as possible using a plastic instrument with a sharp edge.
32. Remove the power button:
This operation can be performed with tweezers.
33. Unscrew the three screws that secure the bracket for the volume buttons:
Manufactured by Phillips, these screws are of a standard design and can be removed from a quality toolbox with a few common screwdrivers.
34. Remove volume buttons:
This operation can be performed with tweezers.
35. Replace the volume buttons and assemble the device:
To assemble the phone, just follow the steps in reverse order. The volume buttons of the device can be ordered from one of the online stores.
Thus, replacing the volume buttons on the iPhone 6 and iPhone 6 Plus can be done in just a few minutes. These actions must be performed as carefully as possible so as not to damage the components of the device, which will cause the need for additional expensive repairs. In order to avoid all possible difficulties, you can turn to the specialists of the EtoService company for help.
Volume buttons stopped working on iPhone? This problem causes a lot of inconvenience in the process of using the device. Below are detailed descriptions of the volume key repair process.
Possible causes of breakdown
- Contaminated keys are common, but the most common cause. Over a long period of time using the phone, fine elements, dust, etc. can get into the holes between the keys and the body. Due to contamination, the keys work, but they are pressed 2-3 times. To clean the buttons, it is better to use an alcohol solution and a cotton swab;
- The button may not work correctly after replacing the upper loop motherboard... This is due to the inaccurate connection of the loop (the volume up / down contacts could be closed). In this case, only changing the keys will help;
- Virus software that interferes with the operation of certain functions of the operating system;
- The appearance of a malfunction after the impact or fall of the IPhone - this requires replacing the volume increase mechanism;
- The presence of liquid in the body;
- Crash after OS update.
The key is pressed, but the volume is not adjustable
If, after pressing the volume control, a ringer window appears on the screen, but there is no volume level indicator at the bottom, the problem is not a breakdown of the mechanism, but a failure of the operating system.
First, try to fix the software problem in the simplest way - restart your phone (soft reset). As a rule, this procedure allows you to eliminate third-party processes that interfere with the operation of standard iPhone components. If nothing has changed after the restart, try pressing both sides of the volume keys at the same time. Repeat the action 3-5 times. This can help bring back normal operation.
Check for available updates. A new build of configuration parameters solves the problem in 90% of cases. Also try rolling your phone back to factory settings.
Until the key mechanism is replaced, you can use the Assistive Touch function with which the desired button will appear on the desktop screen. To enable the option, go to Settings - General - Assistive Touch and move the slider to the "On" position.
Replacing volume keys
Didn't all of the above methods help? In this case, we can say that the volume button of the iPhone does not work due to a breakdown of the mechanism or as a result of contact closure. Replacing the key is quite simple and you can do it yourself, following the instructions:
- Prepare iPhone parsing tools (screwdriver set, plastic spatula, tweezers, suction cup, new mechanism increase the volume);
- Open the device. Then unpin back cover from the display. Remove the Phillips screws shown in the illustration from the battery connector cap. Disconnect the battery cable and remove the battery;
- Locate the volume control cable and remove its cap by unscrewing the screws shown in the figure:
- Detach the top cable bracket from the phone;
- Unscrew the screws with the bracket contacts;
- Remove the contact holder;
- Lift the connector of the volume control cable with the flat spudger;
- Remove the following screws:
- Remove the button switch mechanism with tweezers. At this stage, you can try to clean the component, perhaps it is not broken, but simply clogged;
- To replace the keys, carefully remove them with tweezers. This tool prevents damage to the button membrane;
Replace components and reassemble the device to its original condition.
2014-04-11 19:40:15It is quite difficult today to find such a person who would not know about the reliable performance and high-quality assembly of the iphone 5s. The smartphone is indeed the leader in a number of indicators. But even the most best phone cannot be fully insured against accidents or minor failures.
Almost all control in a smartphone is carried out using touch display... But the most important functions are assigned to the familiar buttons. Thus, the sound level is adjusted, the phone is turned on or off, and the start page... Be that as it may, but it is these mechanical elements that are the weak link of any phone. They can stop performing their functions properly at any time.
Very often, users on the Internet say that the volume control button has started to stick. A variety of factors can lead to this phenomenon. So, for example, the button can become clogged, which will lead to its jamming in a certain mode. In this case, the most common cleaning may be necessary. It is possible to carry out this procedure on your own, but there is no guarantee that everything will end successfully. It is best to contact specialists who will perform all the necessary actions very quickly and will not require high rewards for this.
There are other reasons as well. The loop that transmits all signals from the buttons directly to the system can fail. This can happen after the phone has been dropped or it has been in contact with water for a short time. In any case, the iphone 5s will need to be repaired here. You should not immediately turn to the help of the Internet and study all the training videos, which show options for replacing individual parts of the phone. Without certain skills, it is almost impossible to complete all actions without making serious mistakes. Any attempts to save money most often only lead to additional spending.
Sticking of the volume control button can also occur due to a software failure. Sometimes restarting the device can help with this issue. But such an action does not always turn out to be salutary.
You can often find recommendations on the Internet regarding programs of questionable origin. According to connoisseurs of virtual space, such applications can help out in any situation. So, if a button is stuck on the phone, the user is offered to download a program that can completely disable this control. Thus, it remains possible to control the sound only with the help of the display. The effectiveness of such a solution raises deep doubts. After such innovations, return the phone to its former capabilities, even in service center it will be very difficult.
You should never delay repairing your smartphone. If you have the slightest problems, it is better to immediately contact the specialists who can recommend the best options.