How to connect columns from the center to the computer. Speakers from the music center to the computer

/ Hardware / Audio Systems

How to connect a column to computer from the music center?

Question:

The speakers on my computer are very bad, and I would not want to buy new. There are a pair of speakers from the music center, can I connect them somehow? Sound card - ESS SOLO-1 PCI. Computer columns work with a power supply, and the columns from the music. Center without him. Connected using 2 wiring, and computer columns using the "Nauchikovsky" input (one plug).

Answer:

Connect your speakers from the center is easy, the question will satisfy your output power in 1-2 watts. To a larger built-in amplifier sound card Not designed. Power Supply computer speakers - Power amplifier built-in power supply in these columns. With regards to the number of wires: Comp. The columns are connected via the plug - 3 wires - the left channel + the right channel + shared wire. On the columns from the Music Center, everything is the same, only two common wires. Those. You take plugs, connect together one wire from each column (preferably the same, they are sometimes labeled) and spread it on the most healthy and long plug output. For 2 others, open the channels. Maximum - you can confuse the left canal with the right.

Computer in columns on one-box Connect speakers from the music center to a computer when you need to do it? Betterlessly "? Many faced with this problem. However, they thought about it as a problem. There is no problem here. The first thing to understand is: to spoil neither the computer nor the music center (with all the desire) will not work. Make it is as difficult as to understand a native american who is trying to speak Chinese. In many musical centers, which remained as memory from the middle of the nineties, there are connectors for the microphone. They were usually proudly placed on the front panel, close to the headphone slot. To turn on the sound at the music center you need to select the AUX function. In some models, it turns on automatically. And in almost all the tape recorder begins to "Fon's" scary. Apparently, the sound on them did "with the reserve", that is, with the calculation that no one will use the high-quality microphone on such a device. Often connecting through this connector gives a strong "overload". So check the similar equipment at maximum volume, to put it mildly, it is not worth it. In an exceptional case, the windows can rail. If I failed to find the desired connector under the microphone, it makes sense to look at rear panel apparatus. As a rule, the columns are connected equally - with the help of "tulips". Tulip cord can be bought at any economic store or in the construction market. Sell \u200b\u200bthem and in technology stores. So the search for "tulips" will not be a problem.

volume and no magic computer connection columns from the music center occurs through the audio card. It is installed on all computers without exception. In the budget version, the sound card is built into motherboard. Depending on the model and manufacturer's company, it may have three or more externally identical connectors. They are located in a row and differ only in color. The one is usually celebrated to connect the columns. Every time the question arises: why everything is done, what is called "on science", and for some reason there is no sound, as it was not. The answer is one: every time you need carefully and carefully check all volume handles that are available for free or non-rigid scrolling. As a rule, people prefer to reinstall the drivers, engage in "cleaning" system, cleaning the basket, than you, just not to double-check the volume of the volume of the volume. So, in order. Often there are a lot of such regulators. On advanced keyboards there is a handle. There is also one "standard" (the icon can be found near the clock). Also, the volume knob is softwarewhich is installed for work sound card. Do not forget about the volume of the speakers themselves. Sometimes the reason for the "silence" of the center is simply that someone forgot to twist the handle or click on the desired keys on its player. And last: do not save, buying an audio cable. In the end, in many respects it depends on it whether everyone will be heard, even the most minor, the nuances will sound in the full sense of the word music.

In the section on the question How to connect speakers from the music center to a computer? Posted by the author Neuropathologist The best answer is the cord 3.5 Jack in the bells, sticks out in the AUX input, the columns cling to the center, the AUX and Voila button on the center! flooded))

Answer from Simply[guru]
maybe you will try and adapted to buy)))

Answer from Alexander Lebedev[newcomer]
I just soldered the wires from large speakers The regular places of computer, previously broken up the last and pulling out the board, are powered through the USB. The sound of course became better, compared with small, but still poorly. I want to connect through the amplifier from the music center, only I do not understand where the memory wire for connecting to the computer.

Answer from Rhinoceros[guru]
What you tried directly to connect to the output of the sound card, completely wrong! You could burn her.
You need a 3.5 cable "- 2xrca (minijack - 2 tulips). Minijacks stick into a green card connector, and tulips - to AUX center entry.

Answer from Dron Pintakov[newcomer]
nobody burns anything !!! fuck it all !!! The sound card power is not enough to pull the speakers from the center ... There will be an effect when you connect the center to the computer ... Because in the center there is an amplifier ... I have the same problem only here I am looking for a separate amplifier !!!

Answer from Alex IS_MY_NICK.[guru]
adapter!!!

Answer from Dante[guru]
Throw it \u003d D

Answer from Vyacheslav[guru]
The columns should also be "tulip" or a rope.

Answer from Partizan.[guru]
Connect AUX sockets with sound card output. And Switch Museum Center for AUX. These are sold at one end of the tulips, on a different stereo maker 3.5 Jack you are in a salad hole in sound, tulips to music. center. Then click on the music. The center of the button is changing the modes, type radio, CD and select AUX mode.

Center to the computer. After all, the use of this device for listening to music is very practical. For you, a phonet is available on disks downloaded from certain Internet sites, as well as the radio. After all, if you just use headphones or some external fails to feel the fullness and saturation of high-quality recording. Therefore, true music lovers always try to connect a music center to a computer.

In order to do this, you will need a tulip cord (connects the columns from the music center to the computer, and also connects the music center with a desktop). In stores and in the markets it is called simply "tulip". You can buy it in any specialized store (computer, household appliances, radio and power tools, musical, etc.), as well as on ordinary and radio markets.

In order to make the right purchase, you should know the model of your center, as the connectors of this cord will be selected specifically under the dimensions of your musical equipment.

If you are interested in how to connect the music center to the computer, then you should not follow the advice of some sellers and connect the columns directly to the PC. Insert one end of your "tulip" into the entrance connector, which is located in the music center (each manufacturer it is original, and its location will depend on the device of a particular model).

The second end of this cord will have a standard connector, the so-called "Jack". So that you understand what we are talking about, pay attention to the column connector, etc. In order to understand how to connect a music center to a computer, you must find a special exit socket for columns or headphones. That's it, it is necessary to insert this jack from the tulip. When you do it, the integrated acoustic elements will be automatically disconnected.

The next step after you connected the music center with a computer, the choice of the center menu of a specific option, which will play the sound stream from the connected devices. Basically, this is the same button that includes the sound of the connected TV. Everything, now you know how to connect a music center to a computer. You can enjoy your favorite songs!

Finally, I want to draw your attention to the fact that some sellers will recommend you to acquire an improved "tulip" with gold-plated spraying. They will say that it will allow you to play music without any unnecessary noise. These cords will be much more expensive than ordinary. And even though it will really affect the quality of the sound, but you can easily be able to feel this difference at home. After all, this is possible only with the help of special professional equipment. Therefore, if you are not a DJ or a professional sound engineer, you have nothing to do.

Currently, homework, consisting of musical centers, does not find a wide application and safely dust on the cabinets of the premises. In this regard, it seems that it seems to be how it has already served his age. But the equipment for playing music is high-quality and pretty expensive, so it is a pity to send such equipment on the garbage. Our article Consider the options for alternative use of the device to play music, for example, how to connect a column to a computer from the music center without center.

How to connect speakers from a working music center to a computer?

Let us ask yourself how to actually make the connection of the speakers from the stereo system to the PC. It turns out that it is quite possible. And for a functioning acoustic device, such a connection process is not at all difficulty. For this procedure, you must use only one cable, appearance Which looks like as follows:

• one side of the cable is crowned with usual black minijack by 3.5 mm;
• on the other side, two white and red tulips hang.

Important! There is nothing complicated in this cable, you can make it yourself, just for this you need to at least be able to properly hold the soldering iron. To do this, you need to find the cable itself, if it is not enough, you can apply the cord from stereo handers. The necessary plugs are purchased in any department of radio components in a modern hypermarket or on the market. As they say, and cheap, and angrily.

How to connect a column from the music center to the computer:

1. The purchased cable is connected to the AUX connector, which is located on the back of the stereo panel. These are two identical holes that have red and white.
2. The second end of the cable connect to the opening to exit acoustic speakers on personal Computer. It is a large hole that has a green bezel. And this is almost all.
3. After that, we turn on the audio system, make the AUX mode on it.

Important! Each individual music center has its own setting, which differs from others, so to connect, you must select an individual instruction or you can try to apply the method of "scientific tyka". Maybe it will be possible to guess and correctly determine the desired mode.

Now you can easily use our advice and elementary to connect stereo speakers from the audio system to a stationary PC or to a laptop, if there is a functioning most musical center. But there are cases when equipment for music playback is inoperative, how to solve the problem in such a situation?

How to connect columns from the non-working music center

This situation is much more complicated and its solution requires certain costs. The problem is that the stereo is the amplifier that feeds the speakers. Sound card power located in computer device, lacks for the rinch of acoustic speakers. Therefore, connecting the speakers from the music center to a stationary computer or laptop without the center itself, it is not easy to implement. But probably.

For this, first of all, it is necessary to find an amplifier or make it yourself. For this purpose, both a separate device and the use of cards from old speakers are useful. The main requirement is that the power of the selected amplifier is not greater power of stereo speakers.

Important! If necessary, you can independently sold out the amplifier - this is not so difficult task. On the Internet there are a lot of ready-made schemes of any complexity and various options. The required details can be easily purchased in any radio house of the construction store.

Sometimes there is a computer acoustics in the house, which may have no function of several columns. In this case, it is necessary to clarify this power and operating voltage, conduct a comparative analysis with the acoustic speakers of the home stereo system.

Important! The required characteristics are in the instructions or on the rear panel of the audio system. If the parameters are suitable, then the task is solved, and our device can be connected.

Stock foot

From the above article, it can be seen that the music center released from fashion can be easily turned into computer acoustics. To do this, it is necessary to take advantage of the entrance and some advice given in our article.