How to remove the division of the disk. Personal computer from A to Z

Working with documents made in the MS Word program, you may notice that the text in some of them is divided. It is very convenient, because to each fragment you can apply a separate style of text, make columns, numbered the pages of one part separately from the entire document and so on. At the same time, formatting it, you do not change the text in other parts. Read more about creating sections in Word, you can in the article by clicking on the link.

But it also happens that it is necessary to connect two parts of the document into one. It's not difficult to do it, and in this article we will deal with how to remove sections in Word. These recommendations are suitable if you have a Word 2007, 2010, 2013 or 2016.

Before you begin to remove, let's do it so that it can be seen in what parts of the document they are arranged. To do this, turn on the display of non-selected characters. Click the Home tab and in the "Paragraph" group, click on the button.

Now in the document you can see different characters that were not displayed earlier.

For example, take these two paragraphs. Put it implies at the end of the first so that it blinks with right side From the symbol of paragraph, and then click "Delete" on the keyboard.

The separation of the section will be deleted. To remove extra lines between the text parts, click the mouse at the end of the first paragraph and press the "Delete" the desired number of times - in Example 3 times.

Now let's delete another gap that is set on the current page. Put it impress at the end of the first part and press "Delete".

Note, after you remove the separation, the same formatting as used in the second paragraph will be used. Consider this example: in the second fragment, the material is divided into columns, and the fields on the right and left are reduced.

After removing the page break, the first will also be divided into columns and fields to the right and the left will become the same as in the second.

If you have a specific style applied, then you can make an association in such a way that the style of the first part is applied to the second.

Put itals at the end of the first paragraph and click "Delete" the required number of times. In the example, I pressed 2 times.

As a result, the gap was removed, the style of the text in the second paragraph is the same as in the first, but the separation of the material on the column applied to the first.

If you need to remove this inscription so that the style of the second paragraph has not changed, then in the line with the inscription, put the cursor from the right side of the paragraph start symbol and press once "delete".

The style of the second paragraph will not change, but the first will be divided into columns.

I think you are understandable. The main thing during the removal of the delivered sections do not forget that formatting the partition, which is below, applies to the one that is higher.

Rate article:

The division of the section is an unprinted and hidden from the user a sign that indicates the word text editor, which you need to complete the current document section and go to the new one. Usually users insert partition breaks when you need to apply different formatting to different parts of the document.

But if you have not come across the division of the partition before, it can create you problems when editing text. In this material, we will tell about how to remove the separation of the section in text editor Word. The material will be relevant to all modern versions Word Editor, including Word 2003, 2007, 2010, 2013 and 2016.

If you have the need to remove the separation of the section, then this is done very simple. To begin, it is necessary to activate the display of non-selected signs, this will allow you to see the gaps as ordinary characters and simplify their removal.

If you are using Word 2007, 2010, 2013 or 2016, then you need to go to the "Home" tab and click there on the button " Display all characters" On the screenshot at the bottom, this button is marked with an arrow. Also include the display of non-selected characters can be from the keyboard, for this, the CTRL + SHIFT + 8 key combination is used.

If you are using Word 2003, then the button to turn on the display of non-selected characters is simply on the toolbar, next to the scale of the page. On the screenshot at the bottom, this button is marked with an arrow.

After enabling this function, all non-fired signs will be shown on the page. Now you need to go to the division of the partition you want to delete, and set the cursor before it. In the screenshot below, approximately shown, as it should look like. After the cursor is set before breaking the section, simply press the DELETE button on the keyboard and thus remove it.

Also in Word documents may come across the page breaks. If you need, it is done exactly as well as the separation of the section.

First you need to turn on the display of non-fired signs, then install the cursor before the page breaks and delete it using the DELETE button.

Working with a big document, sometimes you need to start a new paragraph with new pageAnd for this, usually put the page break. In options, we can set a vide, where you can automatically put page breaks, but we can only delete them manually. So, on this page you will learn a couple of ways, how to remove the page break in the Word.

• Remove the gap using the "Delete" button
• Remove the gap using the "Find and Replace" function

Remove the gap using the "Delete" button

Step 1. When in document Word. Used page breaks, they are not visible. In order to see them, go to the Home tab - Next "Display all signs" (Ctrl + *), as in the screenshot

Step 2. Highlight the rupture with the mouse, or put the cursor on the left side of the break.

Step 3. When everything is ready, click on the "Delete" key

As you can see, this is not a difficult way to remove a break in the document. But what if you have any a dozen more? Of course you can hold ctrl key And select all the breaks in the document, and then remove them with the key, but this is a long way, because you have a huge document, then go to.

Remove the gap using the "Find and Replace" function

Compared with the first way, using the "Find and Replace" function, you can save a bunch of time. You do not have to choose all page breaks one after another on a huge document, and you can delete them all after, following the following steps.

Step 1. Open the "Find and Replace" window: "Home" - "Replace".

Step 2. B. open window Click on the "More \u003e\u003e" button.

Step 3. In the list "Special", choose the "page break".

Step 4. In the "Find" field, score "^ M" and click on the "Replace All" button.

If you did everything right, then you should do everything and, now, you know how to remove the pages break in the Word.

In this article you will learn how to delete the section hard disk In the disk management console or using the DiskPart Utility built in Windows 7.

Warnings

To remove volume, you need to enter Windows 7 under accounting with administrator rights.

Deleting a partition erases all the data stored on it. Before deleting, archive all the data you want to save.

Unable to remove from under Windows 7 partition on which you are loading or other system files Same copies of Windows 7, including sections on which its paging files are located. Therefore, if hDD It contains only one partition, you can delete it only during Windows installation.

Before you start deleting, in the Disk Defragmentation Service Settings, set the start type Manually. If this service is disabled, an error message will appear when trying to delete the section: The specified service cannot be running because it is disabled or all the devices associated with it are disabled.

Method 1. Deleting a section through Windows 7 drives

1. Open the Start menu, enter search string diskmgmt.msc and press ENTER.

2. Right-click the section to be deleted and select.

3. Carefully read the warning mentioned:

and click YesTo confirm deletion.

4. Now the selected section is deleted and an unbalanced area appeared in its place. In the Disk Management Manager, it is displayed as a unallocated section and marked with black.

In the resulting unintended area, it is possible either, existing on the same physical hard disk.

Method 2. Deleting a hard disk volume with DiskPart (command line)

2. Enter the DiskPart command and press ENTER.

This command launches the diskpart built-in in Windows 7, designed to control hard drives, their volumes and sections.

3. Enter the List Volume command and press ENTER.

After that, all existing sections with the numbers assigned to them are displayed on the screen.

4. Enter the SELECT VOLUME X command (instead X. Specify the partition number you want to delete) and press ENTER.

This command you choose Tom for further operations with it.

5. Enter the Delete Volume command and press ENTER.

Attention! After executing this command, the hard disk section selected in step 4 of this manual will be permanently removed. This operation cannot be canceled. Make this command only making sure that all previous actions were performed correctly.

If, after executing the previous command, the volume is not deleted, enter another command: Delete Volume Override and press ENTER.

6. Enter Exit and press ENTER to exit DiskPart. After that, you can close the command line window.

The use of breaks is particularly popular with those who often create large documents in the text editor in the text, having sections, subsections and subparagraphs. Indeed, in this case, the use of such a vordic function is very convenient and greatly simplifies the user's work. However, it often happens that the gaps of the page are extra, which is why in our article we will analyze the question of how to remove the separation of sections in the Word.

In order to understand that in the document, it is precisely the user breaks to the user must be reflected in the document hidden non-printable signs. To do this, go to the "Home" tab, then in the group "Paragraph" we click on the "Display All Signs" button. How does it look like - shown in the figure below.

When working in the Word, it is important to remember that the gaps can be installed both automatically and manually. At the same time, the gaps, supplied by the program, the user can not delete, but the ruptures set by manually, can be deleted. How? Read below.

How to prevent the appearance of unwanted pages?

To begin with, we will analyze this issue on the example of the program Word 2013. In order to prevent the appearance of page breaks, put the cursor before the paragraphs to which the settings need to be applied. After you open the section "Page section", open the Abzatz window, which we have repeatedly wrote above. Then open the "rows of strings and pages". We carry out the necessary conditions:

1. Check the box on the contrary - "prohibiting hanging strings" if you want in part of the page for 2 lines of paragraph.
2. If you want to put a ban on the gap between paragraphs, then check "not to tear off from the next."
3. To put a ban on the decree in the center of the paragraph, the user must put a mark in front of the item, which refers to the ban on the gap of paragraph.

How to remove the separation of sections in the Word?

In order to remove manual page breaks in the Word, click the Chernovik section. Next, select the "Page Bar" item, while clicking on the border next to the dashed line. After that, click on the "Delete" key placed on the keyboard.

How to remove breaks in a large document?

This method is particularly suitable for documents consisting of several dozen or hundreds of pages. The user is invited to take advantage of the auto-transaction function in the Word. How can I do that?