Firmware for magician 250. Firmware (shift software) (MAG)

MAG-250 combines great amount Technical capabilities for broadband access to interactive digital TV, as well as unusually convenient for users. Prefix supports playback streaming video, high-quality digital channels, access to OTT services, such as Picasa, YouTube, online movies, etc.

The MAG-250 firmware allows access to numerous channels without limitations on tariffs, and also use it not only with the Rostelecom provider, but also with others.

	DualServer:	https://yadi.sk/d/hl2vcx8eqa5zr.
	mcast.exe:	https://yadi.sk/d/ehwhjelhqa5qn.
	Firmware:	https://yadi.sk/d/vlvgwfoxqa5oj.
	Of. website:	http://soft.infomir.com.ua/mag250/release/
	Dr. Firmware version:	https://yadi.sk/d/hjrk-t8jq9zup.

Firmware MAG-250: Instruction

1. For the MAG-250 firmware, you need a PC with a board for connecting Ethernet, patch cord cable for connecting the console with PC.
2. Download the program mcast.exe. and utility dHCP server - DualServer, as well as last version Firmware (bootstrap-file and imageupdate - firmware file).
3. Create a MAG-250 folder on the disk and transfer downloaded programs to it. mcast.exe and DualServer. In case the firmware files have names other than "Bootstrap" and "ImageUPDATE"- Rename them and also transferred to the MAG-250 folder.
4. Go to B. Network connections From the Start menu. Select the necessary network connection and right-click open the context menu to go to Properties. We choose there "Internet Protocol version 4" and click on the button "Properties". In the window that opens, change the IP address and mask on 192.168.1.1 and 255.255.255.0 respectively.
5. Connect with cable network card PC and LAN-port of the console.
6. Turn on the prefix and click on the button several times Menu.. A BIOS MAG-250 should appear on the screen.
7. Reset the configurations of the console, selecting in the menu Def.settings..
8. On the PC run the DHCP server. To do this, open command line And we prescribe a command in it: C: \\ MAG250 \\ DualServer.exe -V And press ENTER.
9. Run the utility mcast.exe. and choose the necessary network interface with the IP address 192.168.1.1 and then click on the button SELECT.
10. In the program window that opens, correct the IP address of the broadcast in the stream 1: 224.50.0.70:9000 . In the stream 2, the address should look like this: 224.50.0.51:9001
11. On both streams, click the button Start.Thereby launching the firmware and bootloader.
12. In the BIOS consoles choose the item Upgrade Tools., and then Mc Upgrade..
13. After the bootloader is installed, the inscription will appear on the screen. Bootstrap Message: RECEPTION OF AN IMAGE IS STARTED!What does the start downloading firmware. Then the inscription will be changed to Bootstrap Message: Writing Image to Flashand after the end of the firmware will appear inscription Writing Image to Flash Successfull!

Alternative firmware for MAG-250

1. Download the files of an alternative firmware and, if necessary, rename them to "Bootstrap" and "ImageUPDATE".
2. Format a flash drive of no more than 8 GB in FAT32.
3. Create a folder in the root of the MAG250 folder and transfer two firmware files there.
4. Restart the console, while holding the MENU key to enter the BIOS.
5. Select section Upgrade Tools., and then USB BootStrap..
6. Connect a USB flash drive to the console and click OK.
7. The prefix will check and launch the update process.
8. After the update is completed, a message will appear on the screen. Writing Image to Flash Successfulland then the device will reboot.

When the error errors appears on the TV screen, the firmware of your console is outdated. Please update it. " Or just to update the version of your console, you need to perform the following steps:

1. Reboot the console, for this you need to pull the power cord from the connector on the back side of the console (or power supply unit from the electrical outlet) and paste it back.

Make sure the prefix starts loaded

2. Wait for the appearance of the inscription "Loading a portal ... Press MENU to go to the portal selection menu (see paragraph 3a) or" Press SET to go to the internal portal "(see paragraph 3B). The message may differ depending on the version. software Your console.

ATTENTION! This message It appears on a very short time (3-seconds).

3a.In the event of an inscription "Loading a portal ... Press MENU to go to the portal selection menu, you must press the MENU key on the remote control and select the" System settings»In the menu opened

3b.In the event of an inscription "Loading a portal ... Press SET to go to the internal portal" You must press the SET key on the remote control to go to the internal portal. In the built-in portal opened, select the "Settings" icon

On the settings screen, select the menu item "System Settings"

5. Press the "OK" button on the remote control to check availability

6. After checking, press the "F1" button (red) on the remote control

ATTENTION. It is necessary to update the firmware even if the software versions coincide

7. Wait for the end of the update (can take up to 5 minutes)

8. After updating, the prefix will reboot. And you can start viewing.

Attention! If after updating the firmware, an error appears "The firmware of your console is outdated. Please update it. ", Most likely, on your console, a strongly outdated version of software is installed and it is necessary to repeat all actions from paragraph 1.

In connection with the info portal blocking (users not only encountered our service) there was a need for such a topic. In Aplaud, we downloaded patched firmware for consoles 250/254/256/322/326, which locked auto-update and appeal to the info server to obtain data on blocked portals. We are not the authors of the Pacet, you can read more in detail by reference.

Firmware:

1) Download the firmware for your console
2) Connect the USB USB bar (enough 1-4GB) to the computer. If the flash drive is not file System FAT32, then format it. Copy the firmware file to the root USB flash drives
3) On the USB drive, you must have the MAG250 directory (in accordance with the model of your console), in which you are two files: imageupdate and bootstrap
4) Enter the MAG BIOS BIOS. Instruction How to Log in:
- Turn off your console from the outlet.
- Next, insert the USB drive into the connector on the rear panel of the console.
- Press and hold the "Menu" button on the remote
- Not releasing the "Menu" button, connect the power to the console.

After this procedure, you must be in the BIOS consoles.

5) Select "Upgrade Tools", click OK or Right Arrow.

7) Press OK to confirm.

After successful firmware, the prefix will restart automatically and will already be loaded with a new firmware.
Please note that in some cases the situation is possible when the prefix does not "see" the firmware on the flash drive when flashing. The easiest option in this case is to try the described items with another flash drive.

ATTENTION! We do not force anyone to flash the consoles, to do this or not the user decides.

On the example of the console MAG 250

1.

First you need to download the desired version firmware. For this:

• Go to Soft.infomir.com.ua website
• Select the desired model in the proposed list, i.e. MAG250
• In the folder list that appears, choose release /
• Next choose 0.2.18-R22 (name 0.2.18-R22 is valid 0.2.03.18 - followed by firmware update this folder may be called otherwise)
• In the list that appears for download, select (Close the left mouse button) items Bootstrap_250. and

2.

Next you need to rename the downloaded files. To do this, right-click on the file name and from context menu Select Value Rename. The final file name should look like this: Bootstrap and imageUpdate. respectively.

3.

We prepare USB media for firmware. Format it in FAT32.. Create a folder on the drive. The folder name must match the model of your console. Title Indicate the line latin letters, without spaces - mAG250

4.

Copy to the created folder both firmware file Bootstrap and imageUpdate..

5.

6.

Turn off the power console, turn on and click the button Menu. On the remote After that, the initial loader menu appears on the screen.

7.

In case the first item does not appear in the menu TV Sistem., but Upgrade Menu. - Select Upgrade Menu. Press the button Right. Otherwise, go to the next item.

8.

In the menu opened using the button Down Select Upgrade Tools. and activate it with button Right.

9.

In the menu that opens, activate the item USB BootStrap. button Right.

If after implemented actions, the prefix is \u200b\u200bnot loaded, or the process of flashing was not correctly completed, then turn off the power console, turn on the button "Menu" until the appearance blue Screen And change the value of Boot Mode with Nand2, or vice versa. And repeat the software update process.

After loading the console, you will fall into the internal portal, you need to go to Settings And further on System Settingsfurther on extended settings - Advanced Settings (item with a picture of dug and a wrench) - and in the first field, change the language into Russian by the arrows on the remote.
Next restore all settings as after normal settings reset.

The firmware passes in the 2 stages - the firmware of the intermediate version in the loader mode and update to actual version through the Internet.

For the firmware of the intermediate version, you need to download firmware and utilities for the update:

Unpack the archive - we see 3 files in the folder.

Run Mcast.exe. If there are multiple interfaces, you need to select a wired network card. Address Usually species 192.168.x.y

In the next dialog, select the bootstrap and imageupdate files from the unpacked archive.

Knowing item Upgrade Tools I.arrow to the right open the update menu.

We choose point Mc Upgrade. And press the arrow to the right.

The prefix will show the multicast address to enter in the first IP field in the program mcast.exe.

We only change Stream 1, IP Address, Port: 224.50.0.50:9000 with last pictures. The second address do not touch. And press the buttons start.

After a couple of minutes, after the cursor starts to run, the prefix will inform about the successful loading of the first file.

It will be necessary to wait a few minutes while the firmware itself will be loaded:

After that, the console itself will reboot.

The first stage of the firmware on this ends.

At the second stage, you must click on the button when loading Setup.To download the final firmware version.

Go to the section Settings

And choose paragraph Update now.

Select item Refresh

And agree on automatic updates Firmware in the future.

The prefix will automatically reboot.

And show the IPTV credentials window for IPTV, which can be obtained in your account.

To enter a point symbol by key OKon the remote, you can call the screen keyboard.