CPU Fan Error what an error. Causes and Methods for Treating Disk Read Error Occurred

I welcome everyone who reads today's article. When you turn your computer, the BIOS makes the check of each device and later compares the results obtained with the parameters that are listed. It makes the analysis, including cooling systems. This is an important system that allows your equipment to work regularly and relieves it from overheating.

In the event that when you turn on the computer, you get an error CPU. fan. error press f.1 This signals you that there are cooling problems in the computer.

CPU Fan Error Press F1

This warning occurs when the processor radiator cooler simply does not work. Cooler is, as you guessed, the fan whose task is to cool the equipment.

Clogged, or broke a cooler?

So what to do in case a similar problem arose? First you need to explore the problem cooler, carry out surface diagnostics. This is done quite simple:

You need to open the wall system Block Your computer. Next - include meals and see: Does the cooler work? So, the cooler does not work. Do not rush to despair. It is possible that the whole thing in the accumulated dust, which does not give the device to work, as it is necessary. If you see that the fan is completely clogged with dust, then you should take the following steps:

And more precisely, perform cleaning your computer, here's the article by the way:

1. With great care, open the cooling system latch (IMPORTANT: you need it to be disconnected from connectors or fees)

2. Remove the cooling system. Again with great caution: do not damage anything there!

3. Unscrew or remove the fan itself.

4. Disconnect and blow the radiator. It is best to use a special vacuum cleaner. It is possible without him, but it will be more reliable.

5. Carefully cleaned.

6. We collect a fan by connecting it with the radiator. Fit the fan back to the cooling system.

8. We look: did it help?

If it did not help (although you did everything right), then this means that your fan broke. The most correct in this case will replace it with another. Believe me, it will be better. To this article I make a video in which you will clearly see how to properly remove and install a cooler from the processor.

By the way, the warning CPU Fan Error Press F1 may appear and because you have connected your fan to an incorrect connector. For example, you made a mistake and connected it not to CPU Fan. (as I advised you above), and to such connectors as Chassis Fan or Power Fan. As a result, the BIOS simply cannot "see" your cooler issues an error.

Therefore, before conclude that the fan broke - check, maybe the reason in your error?

System error

Another reason CPU Fan Error is an error in the program controlling the fan speed. If it is not configured correctly, the equipment can overheat and break, or at best - emergency to disconnect.

How to check it? Not so difficult, I will tell you, dear friends.

2) We are looking for Hardware Monitor.

3) We look at the rates / turns of the cooler. If it is very low, the equipment can overheat even before your fan starts working.

Of course, you can always turn off the BIOS control. Just turn on "Ignore" (here: CPU Fan Speed \u200b\u200b/ Hardware Monitor). Depending on the model motherboard. In my case, I turn to the download section (BOOT) and changing Enabled to Disabled:

But have the form that then you will need to independently observe your cooler and processor temperature. It needs to be done at your own risk, because to keep track of these indicators is not so simple and then there will always be a risk of equipment breakdown due to overheating.

By completing today's post, I hope that the above advice will help you figure out: What is wrong with your equipment? However, if you doubt the results of your repair - it is better to trust him with a specialist. Do not risk your "hardware" violating.

What is your article? I will be glad if you use the buttons social networksthat are below this article. All to the emergency!

This error can arise After turning on the computer when initialization devices.

During normal operation, BIOS produces analysis operations of power and cooling systems with normal parameters if no faults are produced further launch Systems.

If the CPU Fan Error appears when loading, then this a warning associated with the work of the processor fan. The error is not critical, it can disable in BIOS, however, its ignoring can be dangerous due to the likely overheating processor. To disable this option, we find the BOOT section in the BIOS parameter Wait for F1 IF Error Transfer to " Disabled.«.

How to eliminate malfunction

To eliminate malfunction primarily recommended Check how freely the processor cooler rotates and whether it works at all. Maybe he's just not connected. Often, his normal work can prevent a large number of accumulated between the blades. dust.

If you have stationary computer, then access to this fan is free. Unscrew and remove it will not be difficult.

It is more difficult to deal with laptops. You may need dismantle keyboard and unscrew the set of screws before the opportunity to get to cooler.

Reaching the fan gently make it cleaning. Large dust particles can be obtained using pinzetaSmall - using vacuum cleaner.

The cooler must rotate free, on the dust radiator should not be.

To improve thermal conductivity, you can replace the thermal processor, it will lead to better heat recovery and reduction The speed of the fan required for cooling.

Among possible reasons Problems can be connecting cooler To the power connector on the information panel, instead of a standard on the motherboard. In this case, BIOS does not recognize This fan like CPU FAN. Make the need switching.

If it did not help, try to remember whether the maximum rotational speed Coolers, for example, in order to reduce the noise of his work. It may also be cause Such an error.

Reset BIOS settings to factory, in which these are optimally configured parameters. For more advanced users can try to set the optimal speed of workat which there will be no mistakes and no noise will increase.

The standard situation, the user includes a laptop, but instead of the usual download, receives the message "Fan Error", which indicates the "fan error".

2 ways to solve the problem of the KPU Fan Eror

Over time, the fan flies the bearing. When this happens, the fan begins to spin more than necessary and therefore the "Fan Error" error occurs. To solve the problem, during the inclusion, the supporters of this method use a vacuum cleaner, which is connected to the opening of the heater emission, creates a vacuum, which leads to the fan spinning.

We change the fan to a new similar - it is a more correct solution to the problem.

Cause of Fan Error Error

The reason for the error "Fan Error" is the low level of tachometric pulses, which gives the electronic filling of the fan. The amplitude of the pulses is significantly less on the broken fan. Therefore, the laptop scheme does not see them, from here and the error "Fan Error" occurs.

How to disable CPU Fan Error

An error may appear when installing a passive cooling system, without a cooler. To disable the CPU Fan Error error on the motherboard in BIOS

• we find PC Health Status, there CPU Fan Warning, put Disabled on it.
• disable the warning to stop the cooler in the BIOS menu. It is called "CPU Fan Error" (Enable / Disable) or CPU Fan Warning (Enable / Disable).
• Some coolers have their own built-in thermocontrol circuit ... Then the entire speed adjustment in the BIOS should be turned off.
• Also, many simply exhibit in BIOS Parameter "Wait For 'F1' If Error" to the Disabled position and the operating system will be loaded with this error, but without prior press the F1 key. The consequences are eliminated, and the disease itself remains.

CPU Fan Error Press "F1"

If you turn on the computer, the CPU Fan Error Press F1 error is displayed, but the cooler works well, you can connect the cooler into the connector with the inscription (next to the textolite) CPU_FAN, not Chassis_Fan, etc. Of course this warning is related to the processor fan and first and foremost and You need to pay attention to it.

Checking the power fan power plug, it must be inserted into its own connector on the motherboard with the name "CPU FAN", since there are several more connectors with the word "FAN", for example "Chassis Fan" and "Power Fan Speed", there are even new collectors Computers are mistaken.

Whatever it is burned at the exhaust temperature, it is necessary to hope for us only on the emergency shutdown of the computer or you need to use programs that track the temperature of the components, inside the system unit.

Sometimes there are 4-pin connectors on motherboards for connecting the processor fan, the 3-pin fan is inserted into them, it often leads to a similar error - CPU Fan Error Press F1.

And it happens on the motherboard only one connector to connect the fan of the processor and nothing is inserted into it, naturally, our error will occur. But where is the cooler of the processor? Remove the side wall of the system unit and see that the processor fan is connected to the wires leading to the front panel of the system unit, in turn they are connected to a small round screen, which reflects the rotation speed of the fan.

Insert the plug to your native place and the error CPU Fan Error Press "F1" disappears forever. In other cases, you can try to change the BIOS battery or reset its settings in the default, how to do this to our default BIOS.

Let's talk about the error of the system, which at least does not occur so often in practice, but still worries users. On the screen when you turn on a PC or a laptop, you have an inscription: CPU Fan Error! What does she say about? How to cope with the problem? Effective recommendations from specialists We will present the reader further.

What does the error say?

So, on the screen of your computer, an inscription appeared: CPU Fan Error! Press F1 to Run Setup. What does she say about? This system message warns you for problems with a cooler (special fan, system cooler). Sometimes the inscription may also accompany the characteristic sound signal. Another warning option: CPU Fan Error! Press F1 to Resume.

All of the above indicates two versions: the cooler failed or its work interferes with any disposable external problems. These reasons we will read more and read more.

The device cannot rotate

So, the message CPU Fan Error. In some cases, it indicates a banal problem: something interferes with the normal functioning of the device. The interference can be dust, fine garbage, hair, an extraneous object that fell into the blade. However, it declares such a case when the dust inside the hull accumulates indecently.

The second prevalence of the prevalence: hanging wires inside the systemist. They can hurt the blades, interfere with their proper rotation.

Therefore, when a warning of CPU Fan Error, the first thing you need to carefully open the system unit and see what state is its internal fan coolers. Naturally, the device itself must be turned off!

If the dust is very much, you can get rid of it with the help of a vacuum cleaner, putting on the device a special narrow nozzle. If the case is in the wires, then with the help of special plastic fixes, launch them in such a way that they do not touch the blades.

Do I need to shoot the cooler fan itself for cleaning it? It's not worth the inexperienced user. The fact is that when re-installed, it will be necessary to apply a thermal paste, which simply cannot be at hand. In addition, not every user knows about the need for its use.

Conducting a visual inspection

How to check on yourself, whether the cooler cooler operates:

1. Open the system block cover.
2. Press the power key.
3. Now visually noticeably, whether the blades of the fan rotate.

As we said, if the cooler does not function, then the causes of the malfunction can be two:

• For some reason, the device has been bred. Most often it cannot rotate due to the clusters of dust interfering with wires and so on.
• Even from either one of the fan components, or the entire device is entirely.

The fan is not connected / connected not to the desired connector

Another common problem when CPU FAN ERROR appears when the computer is loaded. Easy easily: there are many practically identical connectors on the motherboard. Hence the output: Do not install the cooler without instructions for the device.

CPU FAN ERROR F1 appears on the screen and in the case when you did not connect the cooler to the motherboard. Cut the problem simply: Turn off the computer, open the system unit, connect the cooler to the desired connector. This kind of problem appears and when purchasing a new computer: Employees of the store's service unit can forget about this fan.

Cooler is faulty

On the screen of your computer inscription: CPU Fan Error! Press F1 to Resume. Can this text say that the cooler is faulty? This kind of problem should be considered in the latter. The fact is that the cooler is a fairly simple component of the system, which is why the probability of failure of its mechanism is relatively small (when comparing with other reasons).

CPU Fan Error: How to fix? If you are desperate to "lead to the feeling" of the cooler with all the above methods, then perhaps the problem in the malfunction of the device itself. Exit from the situation: Replacing the cooler on a good fan.

The reason is not installed

On the screen of your computer Message: CPU Fan Error! Press F1 to Resume. What's the matter? It also happens that the reasons for such a warning do not really exist. In fact, the cooler works, the motherboard is fully functional, the processor is cooled.

How to recognize that anxiety is false? We recommend downloading and installing programs on your PC, applications that by connecting to the motherboard sensors are able to show the temperature of the internal components of the PC: processor, video cards, "motherboard", hard disk. If these indicators are normal, then CPU Fan Error! Press F1 to Resume! - System error.

How to Fix: Option 1

You are confident that the cooler is functioning normally, the system components are cooled properly. However, an obsessive message appears on the computer screen: CPU Fan Error! Press F1 ... how to correct the problem?

Below we give the instruction that will save you from the appearance of a warning. However, you can only use it when you are sure that this message - error. Otherwise, ignoring such a text, you can easily lose the processor. Non-cooled cooler, component simply burns. Not all systems today can reboot / disable the computer when the processor is achieved by a critical temperature.

So, instructions:

1. Restart the computer.
2. As soon as the system starts to boot again, call the BIOS menu. IN different models Computers for this use their keys. Specify this information On the site manufacturer's device.
3. Find the CPU FAN SPEED in the menu.
4. Select IGNored.
5. Save the settings.
6. Restart the system. After that, the problem should not disturb you.

How to Fix: Option 2

Another way to solve the issue is to get rid of yourself from pressing the F1 button each time you turn on, reboot your computer. It is also done through the BIOS menu:

1. Restart the system.
2. When you download it, call the BIOS menu key.
3. Find Wait For 'F1' IF Error.
4. Check the Disabled value for this.
5. Save the settings.
6. Restart the system.

How to Fix: Option 3

If, with a visual inspection of the device, you have established that garbage or other foreign object prevents the cooler to function properly, then it is necessary to act according to the following instructions:

1. Disconnect the device from the board, connectors, gently lifting the fastener fastener on the cooler.
2. Carefully remove the cooler from the system unit.
3. Unscrew, remove the fan.
4. Clean the device radiator. It is best to do this by using the vacuum cleaner.
5. Clean the cooler itself from pollution.
6. Gently install the fan in place.
7. Return the device back to the system unit system. It is especially important to connect it to the required power connector. It is marked with CPU_FAN.
8. Test the operation of the system after cleaned.

How to Fix: Option 4

The reason that the processor is not cooled, may be in the incorrect settings in the BIOS. What to do in this situation? Specialists offer the following instructions:

1. Restart the system.
2. Using the desired key, go to the BIOS settings.
3. Go to the Hardware Monitor section.
4. See what values \u200b\u200bare installed for the start of the fan operation, as well as information about its turns. What is it important? If the inappropriate values \u200b\u200bare installed (in particular, the high inclusion threshold), the processor overheats earlier than the cooler starts to work.

Experienced users are determined by another root problem: this special program installed operating systemwhich is designed to control the number of cooler speed. If it was configured incorrectly, then the system of your computer will be under the risk of overheating. The device can also be disabled to prevent the processor failure.

If nothing helped

If after mechanical cleaning of the device, connecting it to the right connectors, eliminating the hinder does not even want to function, then you can safely judge its malfunction. Solving the problem in purchasing a new cooler: identical model or similar in characteristics.

When installing a new device, we also advise you to pay attention to the quality of the thermal paste used. The substance reliably transmits and distributes heat from the processor crystals to the radiator. The thermalcaste is also intended for smoothing and better contact surfaces (the purpose of this is the best heat transfer). Accordingly, the higher the quality of this substance, the better heat is given, the more active the processor is cooled.

Prevention of the problem

To make a mistake not bothered you in the future, we advise you to install AIDA64 Appendix on your computer (or similar to it in functional). In the program menu, you can control the temperature of all system components. To do this, go to the "Computer" section, and then in subparagraph "Sensors".

You have information about the processor temperature, the speed of rotation of the fan-cooler. Middle values \u200b\u200bfor coolers: 1500-2500 revolutions per minute.

Specialists also advise you to adjust the values \u200b\u200bof critical values \u200b\u200bfor automatic shutdown Systems in case of overheating. It is done in BIOS.

Now the reader knows what the Warning of CPU Fan Error is talking about the computer screen. We also presented a number of instructions that will help cope with this problem, prevent its return. It is important to think about the prevention of faults of the cooler.