How to tie headphones so they don't. How to fold your headphones so they don't tangle

We all love listening to music, I am sure that you have headphones designed for listening to music on the way to work, study or during a weekend walk around the city. But sooner or later, we need to take off the headphones, put them in a pocket or jacket, and leave them there until the next music immersion session. But almost every time you take your headphones out of your pocket, they are somehow magically woven into a ball, which can take up to 10 minutes to untangle. This is annoying.

However, there are several effective ways how to neatly fold your headphones so that they never get tangled in your pocket and are ready to listen in one second.

I offer you several ways to tie your headphones so that they serve you for a long time, do not get tangled and are always ready to use.

1 way to fold the headphones: "Goat"

The first way to neatly fold the headphones can be called "Goat", because we will use two protruding fingers to wind the headphone wire.

First, we need to stick out the index finger and little finger, making the "Goat". Then place the earbuds themselves on your index finger, and the wire on your little finger. After that, start winding the wire alternately around your index finger and little finger in a cross. As a result, you should get an eight. But do not rush to wind the wire to the end. When you have about 8-10 cm of uncoiled cable, wrap it around the center of the figure eight several times, and when about 1-2 cm remains, insert the jack into one of the formed loops.

That's it, now the headphone cable is properly tied, fixed and you can leave it in a desk drawer for long-term storage or put it in your pocket.

2 way how to wind up the headphones: "Boy Scout"

In order to wrap the headphones in the "Boy Scout" method, we need to put three fingers together on one hand: index, middle and ring. Press your thumb against the index of the headphones and start winding the wire around them. As soon as about 10-15 cm remains until the end of the wire, you need to remove the wound wire from your fingers and wind the rest in the middle to fix the wire. When a couple of centimeters of cable remain, thread the jack into one of the loops and tighten slightly. That's all, the wire will be beautifully and reliably wound, while in order to unwind it you need to make only one movement - release the jack from the loop and pull on it.

3 way to tie headphones: "Credit card"

If you have an invalid credit card, or any other unnecessary a plastic card, then you can cut out special notches on it and tie the headphone wire to the cross through them. At the very end, it is enough to put the jack under the wire. This method is reliable and simple, but requires a card, which is not always convenient or possible. However, this method of tying the headphones is quite effective.

4 way how to twist headphones: "Cork"

If you have a wine stopper at home, you can use it to securely twist your headphones and wear them in such a way that they do not get confused and are safe. This method is good because the cork is soft and has no sharp ends. True, it is not convenient to carry headphones crowded in such a way in your pocket; the method is very suitable for a bag or a backpack.

In the back of the plug, you need to make a small depression in order to insert the headphone jack into it. The hole must be made narrow so that the jack enters into it with resistance and is kept inside. The rest of the wire just needs to be twisted into a plug and that's it. Fast, convenient and aesthetically pleasing.

5 way how to properly fold headphones: "Paperclip"

The fifth way to roll up your headphones is great for those who work in the office and have access to large paper clips. A paper clip is very handy tool for headphones, you can easily roll the headphone wire around it, at the end inserting the jack inside to secure it. An elegant and ingenious solution. This method is also not very convenient for wearing headphones in your pocket, but for storing in a bag or backpack it is perfect. Plus, a paperclip can always be used for something else.

6 way to fold the headphones: "Player or phone"

One of the easiest and most obvious ways is to simply wrap them around your player or phone. We simply plug the jack into the audio jack and wind the remaining wire evenly around the player. This method is convenient if you need to hide the headphones and the player in your pocket for a short time; it is not very suitable for long-term storage, because the wire coiled in this way will weaken over time and will dangle. But in order to put it in your pocket for a couple of hours, it will do just fine.

7 way to neatly fold the earbuds so that they do not get tangled: "Special gadget"

You can buy a wide variety of headphone organizers online and in stores that are great for gently wrapping your headphone wire around them for storage and use. The advantage of such organizers is that they have clips for the wire and are suitable not only for storage, but also for use. For example, if the headphone cable is too long, you can extra wire do not unwind from the organizer, fixing the desired size and listen to the headphones with it.

Exists great amount similar organizers both in shape, size, color and materials from which they are made.

Headphones get confused all the time, and it can be difficult to untangle them. This is annoying, everything falls out of hand, and you once again remind yourself that you need to find instructions on how to fold the headphones correctly.

The instructions have been developed for a long time. Everything is very simple! You spend three minutes studying the article, and you will no longer have a question about how to fold the headphones so that they do not get confused.

Recommendations: How to protect headphones from mechanical damage and strengthen the wire
How to clean your headphones
How to properly warm up the headphones and whether it is necessary to do it

Sleight of hand

If you don't have anything at hand, you can use the following algorithm, which consists of 5 steps:

Step 1 - Hold the headphones in your hand so that the speakers go slightly behind the little finger.

Step 2 - Twist the wires by twisting them clockwise, but not completely.

Step 3 - We also twist the remaining 8-10 cm "tail", but perpendicular to the already wound edge.

Step 4 - Pass the remaining 2-3 cm of wires through the "bundle" of wires.

Step 5 - The folded headphones can be stowed away.

Headphone holders

Or you can just go to a specialty store and purchase a special holder along with the headphones. The design is absolutely simple and consists of a mini-coil and fasteners: we wind it up, snap it in and it's done

Phone (player), it is also the holder

You can also wind up the headphones on the phone itself. To do this, attach the headphones to the back panel, wrap the wire around the digital device and thread the plug through the loop.

Wine stopper in action

Yes, it is the cork that can be used as a headphone holder. Similar to the previous method, we wrap the headphones around the cork and fix them securely with a plug.

Universal paper clip

If you don't have anything at hand, then you will definitely find a paper clip. The technique is simple - fix the earpiece in the "clip", wind the wires over it and pass the remaining "tail" through the half rings. The latch is reliable, but inconvenient for carrying in a pocket.

If none of the above methods worked for you, we recommend that you buy wireless headphones. And you will no longer have a headache on how to fold the headphones correctly!

Thematic materials: 11 best Bluetooth headsets for your phone
The 5 Best Skullcandy Headphones
How to Connect Wireless Headphones to Your Phone
,

What if the term paper does not pass Antiplagiat?

Each term paper at the finishing stage is tested for uniqueness, and this is where the student starts having problems. Of course, it all depends on the teacher's requirements, but it is still sometimes very difficult to meet them.

...

How do you know when a term paper has been commissioned?

Students write each semester term papers as a report on the knowledge gained. Grades for "course students" are given separately in the record book, but also play a role in obtaining a scholarship.

...

How to correctly set the tasks in the thesis?

Fifth year, diploma, young specialist, independent adult life! This is approximately the direction in which every student who enters the fifth year of study thinks. In consciousness - euphoria, in actions - far-sighted plans for life.

...

What happens if a student falsifies the signature on the record book?

In his student years, what only students do not invent, just to survive the next session. Every year, the outlook on such tricks only expands, because the desire to get a higher education is above all.

Tangled headphone cords are a perennial problem for most people who use them. Hurriedly tossing your headphones into your bag or backpack, the rest of the way home, you untangle the wires like a garland. We will tell you about a couple of tricks to help you avoid this.

Important: to avoid mechanical damage, do not pull the headphone cord too hard.

Roll the wire into a figure eight

1. Fold your hand as if you were throwing a "goat" at a rock concert.

2. Press down on the headphones with your thumb.

3. Wrap the wire around your little finger on the outside of your palm, then around your index finger on the inside.

4. Roll the headphones in this way, leaving a small piece of wire.

5. Tie the coiled headphones in the middle with it.

6. Plug the plug into the loop formed from below.

7. Pull on opposite ends of the earbuds to unwind them.

Wrap the wire around your fingers

The method is not so elegant, but simpler and faster. It was shared by Dieter Bohn of The Verge. Wrap the headphones around three fingers, then tie the rest of the wire in the middle and remove the plug into the loop. In this way, you can wind up not only the headphones, but also other cables.

Know others convenient ways? Share them in the comments.

Instructions

There are special storage containers. Everything is provided in them for your convenience: you carefully wind the wires of the headphones on a special base, and they no longer have any possibility of tangling. Also handbags (cases) for storing headphones, sometimes they come with. But even in them, the wires often manage to get tangled. You can choose a container or cover convenient for you in any hardware store, contacting a sales consultant for help.

You can fold them neatly by wrapping them around the player. At first glance, this method may seem complicated, but in reality it is not. Take the wire 5-10 centimeters before the plug and fold a regular medium-sized loop out of it, press it against the player. Keeping the shape of the loop, wrap the headphones tightly around the player.

Stack the speakers together. From those going, make a small loop, stepping back 5-7 cm from the speakers. Put the small loop into the big one - the one you created at the beginning, press the small loop with your finger to the player. In this case, pull on - will be tightly wound on. To "" this design, you just need to pull the speakers.

If you store the headphones separately from the player, fold them as follows: spread the fingers of your left hand (if you are right-handed, and on your right hand if you are left-handed) and gently wrap the headphones around your palm, leaving the end of the wire 10-15 centimeters. Remove the headphones from your hand, and with the remaining end of the wire, start wrapping the resulting “ring” of the headphones. You will get two symmetrical eyelets. When the wire is almost empty, thread the plug through one of the loops. Pull it to one side (towards the loop through which it is threaded) and the speakers to the other. The headphones are folded comfortably.

Sources:

• how to make headphones wirelessly

All mp3 player users have to deal with the problem of tangled headphones. Even if the process of unraveling them is not too long, it annoys many. Therefore, it is worth learning how to wind up the headphones so that you can use them immediately, without unnecessary body movements.

Instructions

It is necessary to rewind correctly, first of all, in order to increase their service life. Headphone breakage is primarily due to cable breaks inside the rubber winding. This is that they have no external manifestations of breakage, but the sound will not be all the same, or it will be, but only in one of the earbuds. Currently, the most expensive models of headphones have an additional fabric winding over the inner rubber. This allows the voltage of the wire to be reduced.

Lately, many headphones began to have a built-in reeling system, which is similar to that used in fishing spinning rods when reeling in the fishing line. To produce such headphones the first were Koss and Gembird. If in the hands of the usual headphones-, then it's worth about how to quickly rewind headphones.

It is necessary to take headphones- inserts in the hand so that the mini-jack (the connector that is inserted into the player) lies in the palm of your hand. Now you need to start wrapping around the palm, namely around four fingers, starting with the index and ending with the little finger.

As soon as only half the length of the wire remains free, you need to remove the already wound loops from the fingers and rewind them around the remaining length of the wire.

At the end of this procedure, a pair of earbuds is inserted into either of the loops. Now to unwind headphones, you just need to remove the earbuds from the loop.

This method is far from the only one. If you have a player at hand, you can remove the mini-jack from it, and then wrap the wire around the player and put it in a bag or table, depending on the situation.

Moisture is also the worst enemy of any headphone. Under no circumstances should the headphones be used in rain or snow. It is known from the school physics course that the colder, the smaller the distance between the molecules of a substance. Frost increases the internal tension on the wire, which significantly shortens the life of the audio headset.

Tip 3: How to fold portable headphones so they don't get tangled

There is no dispute about tastes - a golden rule that applies in many areas of life. In order not to argue about music and not to impose listening to your favorite songs on people around you, you should use individual headphones.

Instructions

The modern music and technology industry offers a wide variety of gadgets for listening to music - from bulky professional equipment to amateur small mp3s. For a mobile and busy person, portable players are great, accompanied by small headphones that, when rolled up, easily fit into a pocket.

Headphones "droplets" and "", for all their ease of use, have perhaps the only significant drawback: sometimes their wires get tangled so much that a lot of time and effort is spent on straightening. The best way to keep the headphone wires straight and intact is with a small purse. Choose an accessory slightly larger than your player.

A zip-fastened case works well. Now, before you put the player in your bag, wrap the headphone wires around it and place the device in the case. A comfortable, sturdy bag will not only prevent the headphones from getting tangled, but also save the gadget from possible damage.

You can quickly and neatly roll up the headphones without the help of additional items. Take both "droplets" in your left hand perpendicular to the palm so that the wires are directed upward (in the direction of the extended thumb). Use four fingers to grip the headphones into a fist. With your right hand, moving clockwise, wrap the wires around your palm. Make the loops tight and hold them with your fingers so that the new layers of wire overlap, but not. Gently attach the resulting "ring" to the player and put it in a small pocket - if it is not too loose, the headphones will not get tangled.

The next method is suitable for long-term and neat storage of headphones without a player. Extend the index finger and little finger of your right hand, while clamping the middle and ring fingers near the palm. Disconnect the headphones from the player and hang them on your index finger so that the "droplets" hang down to the outside of your palm. Run the wires by the little finger to the side of the nail, make a "ring" around the finger and lift the wires up to the index finger.

Wrap the wires in and around it in the same way, then "go down" down. Twist the wires around your fingers in a figure-eight pattern, moving from your index finger to your little finger. Support the wires with your thumb to prevent them from sliding or getting tangled. Wrap the free end of the wire around the thinnest part of the figure eight - the one that remains between the fingers. Remove the headphones from your fingers, thread the wire through one of the rings of the figure eight - this will fix the composition.

note

Follow your personal hygiene and regularly clean the headphones with antibacterial wipes, because germs can get into the ear with the dirty surface of the gadget.

Your headphones are tucked away in the bag in the most neat way possible, they still end up tangled anyway. In order not to waste time untangling the wires, you need to learn how to fold them correctly.

Try simply winding the headphone wires around the player. So that they do not slide off it, do not get tangled even more, they must be properly fixed. Stack the headphone speakers together. From the wires that come from them, roll up a small loop. Take the end from the plug and make the loop larger. Slip the first eyelet into the second. Pull the plug while pressing the small loop onto the player. Your headphones will be firmly attached to the player. To disassemble the structure, just pull on the speakers.

You can store the neatly folded earbuds separately from your player or phone. To do this, wrap the wires around your palm. The ring of them will then need to be removed, so do not wrap tightly. Leave free the wire from the plug. Carefully remove your winding from the palm of your hand with your free hand. With the left end, begin to tighten the resulting ring, holding it between your thumb and forefinger. You should have two symmetrical stitches. Insert the plug into the middle of the wires wrapped around the ring and pull it to the side. In this case, the speakers need to be well pinched with your fingers. When folded in this way, the wires will no longer get tangled.

Try another method. Fold the middle and ring fingers of either hand towards the base of your palm. Press down on the speakers with these fingers. Wind the wires from the earbuds around your index and pinky fingers in a figure-eight shape, leaving a small end extending from the plug. Let go of the speakers, which until now were trapped between two fingers and the palm of your hand. Wrap the end of the wire from the speakers, and at the same time the middle of the figure-eight with a wire starting from the plug. Slide the plug into this middle and pull it out to the side. That's it, your headphones are stowed securely.

If all manipulations are difficult for you, buy a special container for portable headphones. Everything is foreseen in it. You just have to wind the wires from the headphones on a special base and carefully put the container in the bag. You can also use soft headphone cases. They can be leather or sewn from dense fabric. Choose the option convenient for you in the audio equipment store. Contact the consultant of this store for help if you are at a loss with a choice.

Related Videos