Menu
Is free
check in
the main  /  Programs / How to split the sound output to different devices. How to output via HDMI: Down with extra wires

How to split sound output to different devices. How to output via HDMI: Down with extra wires

Primary sound setting on a personal computer or a laptop starts with the installation of drivers for a sound card. Of course, the latest modern operating systems, such as Windows 7, are able to determine the model of the sound device, regardless of whether it is built-in or separate, and set the necessary auxiliary software. Of course, this option will not suit the owners of sound cards that came out quite recently.

If the OS has not installed the driver in automatic mode, you should not despair. We need to start from the very beginning, namely - to accurately understand which sound card is installed on your personal computer. They exist three species: 2.1, 5.1, 7.1. At the very beginning when installing special drivers using pop-up tips, you can easily determine it. And already depending on the type sound card You can start setting the sound on your computer, knowing which sound you should get as a result.

How to configure columns on a computer: Step-by-step instructions

First you need to turn off the computer, completely de-energized it. Then connect the columns to the connectors corresponding to the colors with the cords (as a rule, it is green). Also, Line Out may be written on the connector.

After you connect the cords, you need to turn on the computer. Then, regardless of whether Windows 7 or Windows XP is installed, you choose "Start" - "Control Panel" - "Sound".

In the "Sound" menu, you need to find the "Settings of the Audio Colon" tab. There you can choose the correct arrangement of columns (left, right), as well as confirm that their form matches the type of sound card. All these parameters are also easily configured using video tutorials:

Speakers on the computer do not work - what to do?

If there is no sound on your personal computer - it is sufficiently immersion. Here you will not help the tips, how to set up the speakers on the computer. You need to carefully disassemble the nature of faults.


First you need to exclude the possibility of breakdown the equipment itself - headphones, columns. To do this, you can connect them to another sound source. Then you should pay attention to the software (since hardware faults are better to entrust the specialist). In the "Control Panel" you need to select "Administration" and find the Windows Audio service there. It must be able to "work". If everything is in order, there is no sound - it is worth contacting a specialist. Sound configuration on a computer is a fairly simple and intuitive procedure. However, if you are not sure of your knowledge, you may need to seek help to a more experienced comrade, which will help you customize the speakers.

The release of new operating systems brings and unpleasant innovations: someone does not like new design And the absence of familiar buttons, someone seems complex new ways to interact with the system and its configuration. We will proceed to work with Windows 7. How to set up the sound and make it quality - you will learn about this from this article.

Sound setting in Windows 7 is carried out through the control panel and allows you to configure the microphone, speakers, sound effects. The method of setting the sound is different from the setting in Windows XP. The control panel added some changes that may seem unusual for users of others. operating systems. But, in fact, nothing complicated in the setting of sound in Windows 7 is not.

Go to the control panel. In order to gain access to the sound settings, you need to choose the "Equipment and Sound" section -\u003e "Sound" - it is quite logical, in general. We will open the settings window, the interaction with which we will be learned.

The audio plank window is divided into several tabs: playback, recording, sounds and communications. We will get acquainted with them in more detail.

Sound playback settings

Playback tab We show us a list of devices that can play sound. Used in this moment Devices are marked with green dawn, and disabled - red arrow indicating down. Here, devices are not only physically connected to the computer, but also those that can be connected in principle - i.e. Sound adapters for which drivers are installed. Select the active device and click the "Configure" button. Here we can configure the playback device.

First, we configure the speakers depending on the number of sound channels. If headphones or regular speakers are used, then our choice is "stereo". If you have a more advanced audio system connected, you can select "quadroponic" or "surround sound 5.1" or its own, but in version "7.1". When you click the "Next" button, we can specify the location of the speakers, which of them are broadband and other useful things.

If you click the "Properties" button on the Playback tab, we will see the window with additional audio settings. Here we can enable or disable the device; Change its icon and specify the sound format, configure sound playback effects.

Sound recording

Let's go back to the windows of the general settings of Windows 7. How to configure the sound of the record? This is also easy. On the Record tab, similar settings are presented, but now for sound recording devices. If you select a microphone and click the "Configure" button, the speech recognition window opens. Unfortunately, Windows will inform us that the recognition of speech is not supported for Russian. The "Properties" button can bring us more benefits, when you click on it opens a window with tabs. Sound setting in Windows 7 is not the most difficult lesson, isn't it? The "General" tab in the microphone properties displays brief information about the device. Tab "Listen" Allows you to connect a player or other devices for listening to music; On the Levels tab, we can change the volume and enhancement of the microphone, and the "Levels" page contains the settings of the bit and bitrate. The "Improvement" tab gives us the opportunity to include various sound effects.

Other tabs general settings Sound in Windows 7 is also helpful. On the "Sounds" tab, we can change the sound scheme used, and the "Communication" tab allows you to reduce the volume of sounds when conversations - convenient and understandable! We hope that this article helped you familiarize yourself with Windows 7. How to configure sound? It's easy, because now you yourself can share your experience!

No matter what goals are purchased personal ComputerIt will always be used as a multimedia center for watching video films and listening to music. Even the most "weak" computer will easily cope with such a task, so before you start using your computer as a multimedia center, you need to figure out how to configure sound on your computer. It is assumed that readers have already checked the volume and set (and downloaded from the Internet) all the necessary codecs (K-Lite Codec Pack). Without these two steps, each may have problems with playback.

Fast setting

Regardless of what does not work, proceed to the bottom right angle of the desktop. In the tray we find the speaker icon, if necessary, click on the arrow.

Adjust the volume if necessary. Click right-click and further select the item depending on the nature of the malfunction:

  1. For sound - playback devices.
  2. For voice - recording devices.

Playback devices

Entering the sound window, first do it click right-click and put the daws:

  • Show disabled devices.
  • Show disconnected devices.

The difference between them is that the first programmatically disconnected, for example, through the task manager, and the second are missing at all, could be deleted or even initially not used.


Standard analog output

On the screen the typical set of devices. Speakers are outputs located on the rear panel. To make sure that twice climb on the icon.

Right here is a decoding in colors. Due to the fact that the translation into the Russian curve, the newcomer may not understand what it is about:

  1. Green - left / right column. In the Surround Sound1 system, these are frontal speakers.
  2. The orange port overlook the channels of the center and subwoofer.
  3. Gray - rear (rear, side) columns, left and right.

On HiFi Systems Sound Around 5.1 Usually there are polar outputs - two for each column. Therefore, you need to find an adapter for a computer. As for the usual stereo, then there Jack is already smoky, it remains only to attach it to the green entrance. The pinout of the adapter 5.1 in our case is as follows.


Knowing the layout, you do not need to be afraid of further options (because the list is extensive). We will analyze what each setting means.


At the top it is proposed to change the settings of the entire sound immediately. At the moment, the level is 47%. By pressing the speaker icon, you can instantly turn off all the columns, there is a balance nearby. But there are another 12 settings! They should not scare us:

It remains to add that the subwoofer and the central column, gray - both sides are simultaneously adjustable by changing the level of the orange connector. In embarrassment can only lead in - inputs. In fact, some of the connectors are outputs for sound. We did not say anything about the blue. This is a linear analog input, like (pink) microphone. The improvement bookmark is invited to consider below.

Headset on the front panel of the system unit

The second in the REALTEK HD Audio 2nd Output list is an audio connector of the front panel. The red arrow means that it is not connected. What has already been mentioned above. This option means that on the motherboard there is a free f_audio connector, where you can make the headset. A typical appearance is shown in the picture.


If you look at, then you can notice - the second left of the lower pin. This is the key to which the connecting layout is determined. The electrical interface is shown on the screen.


The pinout will help connect almost any headset here. It should be noted that two different physical interfaces may go to F_Audio:

  • AC`97.
  • HD Audio.

The table is given for the second case, because the first is overwhelmed. But in the specification on motherboard You need to clarify what signals this connector comes. In addition, you can separately find the internal USB ports for the headset, but usually no one uses them, and instead, they use those that are located on the housing system Block. On the photo a typical combined module for the front panel of the system unit from a USB and audio-jack. Two connectors differ from each other by key position.


Digital audio output S / P-DIF

The last component in the playback device menu works properly, but the description says something about the mysterious internal port of ATAPI. You will not find anywhere in the Internet to decrypt these words. In fact, it is just a S / P-DIF connector, which is not on the rear panel. The connector on the motherboard is empty. Why can S / P-DIF be needed when setting up the sound?

The interface was presented in the 80s (XX century) by Sony and Philips after the release of the first digital CD players. To play music, had to perform a double conversion of analog number (reverse and direct), which reduced quality. S / P-DIF transmits at maximum performance a stunning sampling rate (sampling) to 768 kHz. Bitrate tires usually ranges from 2 to 3.1 MHz, depending on this parameter:

  1. 2 MHz for the sampling frequency of 32 kHz (satellite receivers).
  2. 2.8 MHz for sampling frequency 44.1 kHz (CD players).
  3. 3.1 MHz for sampling frequency 48 GHz (digital tape recorders).

To estimate the possible benefit of this connector, pay attention to the Supported Interfaces tab.

  • DTS Audio. Used to play HD quality video and Blu-ray discs. Supports the system of columns 5.1 and 7.1, depending on the software implementation. Suitable for connecting home theaters.
  • Dolby Digital - in the usual form the same interface 5.1. Difference from DTS in the capabilities of the plug-in equipment (players, home theaters, etc.).
  • Microsoft WMA Pro Audio. Used by some players, for example, online on the site nbcolympics.com/video.

All three varieties provide high-resolution digital sound transmission for complex acoustic systems. Because they are transmitted on the same channel, the process is completely transparent to the user. In some cases, you will need codecs or drivers. S / P-DIF is a hybrid output port 3-B-1 to achieve maximum compatibility with external equipment.

How to use S / P-DIF

From the configuration system board It can be seen that the manufacturer (Gigabyte) is not very careful about the digital output of S / P-DIF. Instead, there is a high-performance HDMI port on the rear panel. This is a hybrid audio and video information interface on one line. The problem is only that the cable is not noone else, complete with the equipment is supplied extremely rarely and not supported by all devices. The HDMI interface columns are extremely difficult to find, however, the same can be said about S / P-DIF (for example, Polk Audio Woodbourne).


The photo shows that the connector is presented with only two pins. According to Gigabyte, GigabyTe uses the Alc883 transmitter here, which can be directly to start an optical or coaxial input of 75 Ohm of any equipment. This will require an appropriate cable. Some of the Pins is a circuit ground, and the other is the output of digital sound. For docking, the pin connector is suitable from the system fan (cooler). The ports managed to find on E-Bay (ebay.com/sch/-/175673/i.html?_nkw\u003dspdif). True, they are not noone. If it is possible, you need to ask connectors in the nearest PC repair workshop, sometimes there agree to sell at a table price.

On some, even old, motherboards (ASUS A7N8X-X) there is a S / P-DIF connector with the entrance. This allows you to record sound here and perform some other operations. In this case, the pins may not be 2, but more, for example, 6. Their functions are painted in the user manual (see photo).


HDMI

Analog sound will never be the best. Therefore, if it is not possible to use S / P-DIF, then you need to buy. This digital interface is usually available on modern motherboards. Its version you need to look at the user manual. Starting with 2.0, the interface supports the transfer of integer 32 independent channels. Of course, HDMI is compatible with DTS and Dolby Digital, mentioned above in connection with S / P-DIF. HDMI is aimed at movie lovers, and not on music lovers, because it allows you to transmit high-definition video at the same time.

To use the interface you need to buy a cord, and the input connector will be found on the home theater. From the said it should be clear that it will take 5.1 or 7.1 (including +2) to enjoy all the advantages. Otherwise, there is no need to use such complex equipment.

Recording devices

This topic is actually disclosed. Analog microphone is usually inserted into a pink Jack next to the headphones, and the USB headset sometimes requires the driver installation. The author had to see one village system administrator (a population of about 2500 people), who said that complex headphones do not require the driver. The fact is that in the villages they do not sell truly high-quality equipment, and not everyone knows about her.

A complex USB headset is defined in the device manager as compound device. And it does not work, although sometimes (we have not seen this personally) in the headphones you can hear something. It is not suitable for Skype and communicate, and still it is recommended to put the driver. Because inside the sophisticated headphones, its own controller can often stand.

The main problem of users is that the microphone settings are written zero gain. Therefore, you say, but you are not heard. It is fixed in a couple of minutes. At the beginning, it was said how to enter the playback device, and now you need to select recording devices. Squake in the context menu, as described above and change gain. I would like to draw attention to the fact that manufacturers meet errors. For example, our microphone allegedly stands on the front panel, which is not true. It is stuck in a jack next to the speakers.

Performance check is carried out with light-clicking fingers in the reception area. With this indicator on the right side of the window partially paints green. If this does not happen, then the sound does not come, and it is not to blame for communication. You click on the working microphone twice and go to the Levels tab. Here all scales need to be put up to the maximum. Most programs independently regulate the volume of the headset volume, and do not worry about it. If the indicator clinks now green, then everything is in order. Otherwise, check the drivers, switches on the microphone, because the device works incorrectly.

In the window, in addition to the microphone, there is still a stereo mixer. This device is systemic, you will not find it on the motherboard. It is responsible for mixing channels. And if you need to complete the full screen capture, and not just a microphone, you should select the default stereo mixer. Other programs (Audacity) allow you to change the raid. Under the line input is understood as the Blue Jack (see above).

Skype.

Now it is not necessary to put Skype, because an online version appeared (Web.skype.com/ru/). To do this, you need to put a plugin on the browser.


After that, it will be necessary to give permission to firewall, and you can begin to communicate. The minus is that there is no checking option. But if everything is configured according to our instructions, there should be no special problems. To check the microphone, use any audio capture program, including a voice record built into Windows. In the new Windows 10, the microphone will highlight a warning, which is an additional guarantee and simultaneously signal to check.


This means that applications are forbidden to use the microphone. Then here, in recording, you need to go to the parameters and give permission. Otherwise, the microphone will not work.


In the Skype application installed internal settings Simultaneously change the system gain of the microphone. You need to remember this and check them periodically manually according to the scheme described above.

How the sound is played on the PC

To begin with, it is worth understanding how the computer reproduces the sound. In analog interfaces, a digital binary signal is converted from music or video files to continuous. The first on the path of the converter chain is the software or codecs that unpack the audio file and allow you to further read the media player sound data. Data from the central software nucleus after processing is received in the audio board, where there is a binary conversion to analog sound and its pre-amplification. Next, information enters the audio reproducing device, headphones or columns.

There are various formats, and each has its own specifics, talking about which does not allow the scope. Therefore, it is considered usually sufficient to download from the Internet and put K-Lite Codec Pack. This package comes with its own very good player.

Sound configuration on computer in operating room windows Environment It is performed both using standard system tools and using third-party utilities (which are better not to use). Let us consider setting the sound using standard tools that are on any computer. To do this, go to the "Start" menu, then the "Toolbar" menu and select the icon with the inscription "Sound". Settings that can be carried out using this standard utility are as follows:


All of the above actions will be possible only if the drivers are correctly installed to interact the sound card and the motherboard. These drivers usually go on a platform with a map, or on the REALTEK website (rarely on the other). To check whether the drivers are correctly installed, it is necessary to do as follows.

In the "Start" menu, hover the cursor to "My Computer" and open the properties menu using the right mouse button. Go to properties, then click on the line with the inscription " Extra options Systems "(for Windows 7 and higher, for Windows XP This step is not required) and in the window that opens, go to the" Equipment "tab. After that, click the Device Manager button and you can see all devices installed in the system. Next in the tree, expand the "sound, video and game devices" node and make sure that the devices function correctly (there is no yellow icon with an exclamation mark). If there are any problems, reinstall drivers.

Sometimes there are such situations that we turn on your computer, and there is no sound. The same situation may appear after reinstalling the operating system. What to do in this situation, how sound configuration on computerLet's try to understand this issue.

First you need to make sure that your columns or headphones are connected not only to the PC itself, but also (in the case of columns) to the power grid. If everything is in order here, we translate your gaze into the bottom left corner of the monitor on the "speaker volume control", it looks like this:

There are often situations that the volume slider simply stands on zero. If everything is fine here, then proceed to check the drivers. For each operating system, this test is carried out in different ways.

Sound Setup on Windows XP

Configuring sound on a Windows XP computer is as follows, to start, press the "Start" \u003d\u003e "Run" or "Run" button, after which the window appears, in the row of which you need to enter: "devmgmt.msc" and press the "OK" button. Now the device manager appears before you. In general, it should be said that if there is a yellow exclamation or question mark here on any device, it says that the device works incorrectly or does not work at all. So, in our case, if you have in the "Device Manager", "Multimedia Controller" is indicated exclamation familiarAs in the picture below, you have a problem with drivers.


To do this, you need to find your own boxes from the motherboard in which the drivers for the motherboard should be. Using this disk, install the driver for your audio controller.

But for no hope, you do not have such a disk, and what to do in this situation? The solution to this problem will be the search for drivers on the Internet. Some will immediately say that it is hard and that it will be necessary to flip great amount Drivers, but it is not in the case of our advice. So, open the device manager \u003d\u003e on "Multimedia controller", which is isolated by an exclamation mark, press PCM \u003d\u003e Properties. A dialog box appears in front of us in which you will need to go to the "Details" insert, and from the list that has appeared, you must select the equipment ID, then you should get the following

Each upper line will be different, since each audio equipment is different. Press the PCM on this top line, copy, go to the Devid.info website.



In the line specified in the picture insert your code and click "Search". Congratulations, you found your audio driver. Download your operating system, install and everything should work.

Windows 7 and Windows 8

Sound setting on windows Computer 7 is carried out by the same method, only to go to the device dispatcher, you can use the following method, on the "My computer" icon, press PCM, "Properties", window appears


And in the right part, go to the Device Manager. Setting the sound on Windows 8 and 7 more simplified. Again, we are looking for your audio device with an exclamation mark, click on it PKM \u003d\u003e Update drivers ... \u003d\u003e Automatic search updated drivers.


With this approach, the operating system itself will search on the global network drivers for your audio device and no program to configure sound on the computer you do not need. But again there is a problem when there is no disk with drivers from motherboard and exit global Network. The only output remains here, again, copy the equipment code of your audio device, insert the flash card in the PC, create on it text DocumentOpening it, insert the equipment code, we save the document, and go with a flash drive to a friend, a relative, a familiar, in general, to anyone who has access to the global network. And using this code is looking for a driver for your audio device, as described above. Download the driver on the flash card and install it on your PC.

We hope that this article helped you in solving your problem.

Typical Windows problems are associated mainly with the fact that it is not possible to properly configure the equipment in the computer. For example, dynamics or speakers may not work. There is no sound for various reasons on the computer, so first you need to touch the panic and try to restore the normal work on your own.

We check the technique

No opportunity to listen to something? Immerse yourself in the deep reasons for the lack of sound and try to configure the audio board. It is necessary to be sure that everything works fine on the computer. For this you need:

  • Open the Start menu and select there Windows Control Panel.
  • After clicking in the System and Security category.
  • Then B. special section System Click Device Manager.
  • If the Windows administrator password is requested, then you must enter it.
  • After that, you need to click on sound, game and video devices twice.

Now you should view, is there a sound card in the opening list. If it is not there, you should read the instructions from the manufacturer how to configure it. It is also helpful to look at the Other Devices tab, the sound fee may be there. The laptop is usually easier to configure in this regard, since there is no sound card. Instead, there is a special sound processor.

Sound in Windows may not work if there are problems marked with a yellow question mark opposite sound card:

  • You need to right-click on the sound card and select Properties.
  • After you need to go to the General tab and check the condition of the device.

Usually, in such cases, the sound in Windows can be restored to a simple installation of new drivers on the computer. If there is no time to pick up the network for a long time to search and install the required driver, you can try a good program called Driver Genius.


After this program is launched, it finds everything required drivers On the network (including for sound) and can install them independently or restore in Windows.

Connection check

If there are speakers, but there are no signals with them, then you need to check whether they are connected correctly. Almost on all computers, the sound works from three connectors that are connected to the sound card. It is important here to understand that the speakers need to be connected to a linear sound output.

And what if no confidence is what connector and for what is responsible? In this case, it is worth moving all the options on the computer, alternately connecting to each socket. The same goes and the headphones. It is interesting to know that in almost every computer after connecting the headphones, the sound is turned off automatically.

Power Check

The columns can be simply not connected to the power supply, so the sound is absent for physical reasons (no current). Naturally, you need to connect speakers to the network, and the speakers will start playing sound. Also applies to regulators through which the columns increase and reduce the volume. Often, a sound controller is unscrewed on laptops in minus, so that small speakers are simply not heard.

You need to open the volume across the next way:

  • Click the start menu;
  • Then select the control panel;
  • Press equipment and sound;
  • Further point sound;
  • At the end, adjust the volume.
  • Then the volume slider must be raised up.

It is important to trace if the sound is not turned off completely in a mixer. Some laptop models have external wheels in order to adjust the sound that is served on the speakers. You need to check this wheel.


Checking software

And what if after all these manipulations, never managed to configure? Nothing terrible, just need to check the volume level in programs installed on Windows. Perhaps he is simply not reproduced there. Each program has its own regulators so that you do not need to switch to Windows installations, but quickly reduce or add volume. So it is better to check the settings everywhere and everywhere (speakers, headphones, installations) to eliminate all the reasons for the lack of sound on the computer and then restore normal operation.


Various errors of operating systems are directly dependent on users. It is enough to download a malicious program that is attached to free files On the network, and the problematic failure will begin. However, if you keep track of all software that is installed and deleted, you can keep the system under control. So the columns will sound, and the picture is competently displayed, and the programs can be operated correctly.

(Visited 22 486 Times, 25 Visits Today)


It is no secret that sound cards that support the High Definition Audio standard are able to not only determine how devices are connected to, but also to play / write multiple audio flow streams in parallel. Sin does not take advantage of this functionality. After all, in our time it can significantly increase the level of comfort when working with a computer.

Suppose we have speakers that are connected to the rear panel, and the headset connected to the front panel of the sound card. And we want the sounds of system events and players to reproduce through the speakers, and the sound from Skype walked through the headset. What advantages will this give us? When the Skype calls, you will not need to hurry to connect the headset or turn off the speakers so that others do not hear the conversation.

Setup in Windows 7

To do this, we need to configure the sound card driver for independent processing of signals from the front and rear panels. Follow these steps:

Press the button Start and select Control Panel :

On the control panel, find your sound card manager. In our case, it Realtek Manager HD. :

In the window that opens Realtek HD Manager click the link Additional settings Devices :

Select the simultaneous playback mode of two different signals For playback device. And the separation mode of all input sockets for the recording device. Click OK To save the settings:

Now we need to configure the sound card so that all sounds default Reproduced through dynamics. Click right The mouse button on the volume adjustment icon near the system clock and select Playback devices:

The same window can be called, going through the button. Start on the Control Panel and clicking on the link Sound.

In the window Sound On the tab Reproductionwhich will be already open, highlight the item in the list Dynamics and click Default (It is the button itself, not the arrow to the right of it). This action you will specify Dynamicsas priority reproduction device. All sounds by default will go through speakers. See Picture:

Now highlight the item in the list. Realtek HD Audio 2nd Output ("Secondary output", i.e. exit on the front panel) and click arrows Next to the default button. In the drop-down menu, select Default communication device. Thus, you indicated that the headset should be used in your system:

It should work out as in the picture below:

Now that the default playback device is set, click OK For closing the window Sound.

In the window Settings Select section Sound setting. Here, as an used microphone, we need to choose:

  • as an active microphone: a headset microphone connected to the front panel - MIC IN AT Front Panel (Pink):

  • as speakers: headset, connected again to the front panel - select the device in the list 2nd Output:

  • and as a device for playing a signal incoming call Choose speakers.

Note. If you want, in paragraph Call You can choose a headset. But in this case you can not hear the call, if you go away from the computer.

It should work out as in the picture below. When everything is configured, click Save To apply settings.

Now all the sounds (music, video, system events and sounds from the browser) will be played by default through speakers, and Skype conversation always Will go through the headset.

Similarly, you can output sound from any application on the desired deviceNo matter what playlist is currently selected by default. For example, for a DJ laptop on a disco logical to select the default sound output to the headset, and on the column output only the sound from the AIMP player. In this case, vacationers will not hear through the columns no sounds other than music.

Setup in Windows XP

Double-click on the Realtek icon in the taskbar to open the sound card manager (in our case, the RealTekhd Manager).

On the tab Mixer in the setting area play Click the icon Settings:

Check the box Enable multiple streams.

Click OK To save the parameters:

After that, you can select the default playback device. Through it will display the sound of a program that does not have sound settings, as well as all applications in which the audio output is configured to Primary sound driver:

In the same way, the recording of multiple threads is included.

Click the icon Settings in area Record:

Check the box Enable multiple threads.

Click OK:

Users often ask for a computer to bring the sound from the microphone on speakers or headphones. In this small article, we describe two ways at once, as can be done.

Method No. 1. Sound settings in Windows.

In order to output the sound from the microphone to or headphones, you must first open the sound settings. To do this, right-click on the speaker icon on the taskbar and in the window that appears, select "Records".

After that, you will appear the "Sound" window, open on the Record tab.

This window can also be opened through the control panel. For this you need and go to the "Equipment and Sound - Sound" section. And then, in the "Sound" window, open the "Record" tab.

So, after you opened the "Sound" window on the "Record" tab, you need to go to the properties of the microphone. To do this, highlight your microphone with the mouse and click on the "Properties" button.

In the properties of the microphone, go to the "Listen" tab and turn on the "Listen to this device" Enabling this feature will allow you to bring the sound from the microphone to your speakers or headphones.

In order to save, close all windows by pressing the "OK" button. In order to remove the microphone sound from the speakers or headphones, simply go to the properties of the microphone and turn off the "Listen to from this device" function.

Method number 2. Sound card settings.

You can also output the sound from the microphone on speakers or headphones using your settings. To do this, open the sound card settings and find the microphone parameters there.

Yesterday we decided to watch the movie with my wife, but in order to prevent anyone to prevent anyone to distribute the sound at the same time on two pairs of headphones. Some headphones are simple wired, which simply intercept the sound from the speakers when connecting them to the laptop, and the second is wireless Qumi Concord. connected via Bluetooth. Is it possible to make it standard windows tools 7?

It turned out that it is quite real. Most computers are supplied in our time with the built-in sound card from Realtek. It is required that native drivers are installed on it, even necessarily the most fresh, but also not those that go to Win7 out of the box.

Now I have sound only in columns, and the microphone is used from wireless headphones. Open the recording tab.

After that, turn on the display of all devices, even disconnected according to the system.

I have a supposedly disconnected software stereo mixer of my sound card. After that it needs to be included.

And choose it to reproduce on your second sound output device. In my case it is wireless headphones. After that, the system will start simultaneously display the sound on the column (or the first headphones) and additional device, such as wireless.


At the very beginning, I want to clarify how the sound interface works on the computer so that you understand what we will speak on.

The computer sees any device that can reproduce sound, separately from others. If in by the usual computer There is only one sound card, whether it is built-in or separate, then in some cases these devices can be much more.

In order to allow a person to control these devices, as well as to automate the sound playback in the general case, in computers with Windows, a special item is provided in the sound output settings called "Device Device".

How to get into the control panel of the audio reproducing devices in Windows


In the lower right corner of the screen, find the clock, to the left of them will be the "Speaker" icon, click on it with the right mouse button.


In the pop-up menu you need to select the "Sounds" item and click on it with the left mouse button.


You hit the sound-reproducing device control menu. As part of this article, we are only interested in the "Reproduction" tab.

What does the default device mean?


This menu item shows how the device is currently responsible for the output of the sound or for recording sound.

For example, if there are many audio-reproducing devices in your computer, it is this setting that will show which device at the moment reproduces the sound.

The default sound output device is generally

Imagine that you have only one sound-reproducing device in your computer - the sound card built into the motherboard.

The list will only be alone and, of course, it will be the default device and you will not have any problems.

However, if you connect USB headphones to this computer or USB columnThe list will appear 2 devices.

If you connect a monitor with embedded speakers to the computer, the devices will already be 3 and this list may last very long.

Therefore, it is important to understand how to adjust and customize Windows so that you can listen to the sound through that the device you need.


Suppose you have one sound card and you connected the monitor with columns, while you already have good speakerswhich are connected to the sound card.

Of course, the sound quality of individual speakers will be better than that of the monitor built into the monitor, so in order for the sound to be displayed from individual speakers, we need to select the default playback device.

After we have chosen the default audio card, the entire sound from the computer will be displayed through it.

Select the sound playback device in the application

Let us return to our situation when we have 2 sound reproduction devices: columns embedded in the monitor, and a separate sound card.

In the settings of all such applications there is an item that allows you to select sound reproducing and recording devices that will be used in the activity of this application regardless of which the device was selected by default in Windows.


Go to the audio setup of the Discord program. We see that we can choose separate devices for recording sound and its output. What gives us that?

We can choose the same sound device to output the sound, which is used for the rest, or can choose a separate one. Thus, we can split several audible streams to output different devices.

For example, you have external good speakers that you use to voice the game, and there are columns embedded in the monitor that you do not use at all. With the help of setting the sound output devices inside the Discord, you can make the voice of your interlocutors output through the speakers in the monitor, and the sound of the game would be displayed through good external speakers.

For this you need in Windows device By default, select the external speakers, these settings will see the game and will use it for yourself. And in the discord, we select the column sound output device in the monitor. Now all the voices of the interlocutors will voice the monitor, and the game is good columns.

As you understand this is just an example, you can choose any sound devices So, as you are convenient or appropriate.

Similarly, you can also choose different recording devices if you have several microphones. For one application will use one microphone, and for another second or vice versa.

USB Headphone Connection against Conventional Connection

Is there a difference between the connected USB device and with the standard TRS Jack?

Yes, there is a difference. It lies in the fact that any additional USB devicewhich is capable of playing sound, it is considered to be Windows individual from others and they can be flexibly controlled. While your sound card seems windows like one device, and if you connect the columns and headphones simultaneously Windows will still see them as one audio reproducing device.

But what if you want to switch between speakers and headphones that are connected to one device?

There is a solution, but I will describe you only a common algorithm, because Each of the sound-reproducing devices can differ significantly from another branded application interface or settings.

Make sure you have on your computer installed latest version Drivers and brand software For your audio reproducing device. This is a prerequisite.

Is it possible to configure automatic switching From the columns on the headphones and the opposite?

Consider the situation when you have one sound card, to which you simultaneously connected headphones and columns.

The speakers you connected to the green output on the back of the computer, and the headphones to the audio jack on the front of the computer.

If the front panel is connected to the sound card correctly, automatic switching between the sound output on the speakers and headphones by the software of the sound card software will occur.

Windows will always be sure that the sound is displayed through the audio card, and will give it all the sound stream for processing and output. The sound card will independently determine the headphones are connected or not and output the sound on them.

How to switch the sound output to headphones If the front panel does not work


Some sound cards can change the purpose of the nest on the rear panel of the computer, depending on the situation. For example, in some cases a line input (usually designated in blue) can be used as a separate headphone entrance.

Do not connect headphones to the linear input if you did not make sure it is now working as an entrance for headphones. Otherwise, you risk damageing headphones.

To find out if your sound card supports such a mode of operation or in the sound card settings, or reading the instruction.

If the sound card can use a linear input as an output to the headphones, then your problem is solved and when the headphone is connected, the sound will automatically be redirected to them.

If the sound card does not support such a mode of operation, you will have to turn off the jack speakers, then connect the headphones to the audio jack (usually designated by green).

At the same time, in the settings of the sound card, it is necessary before connecting the headphones to subsoine the volume level to the minimum and switch the operating mode of the green output to the "headphones" mode if possible.

If the sound card continues to work in the "speakers" mode, and you connect the headphones, it may remove the headphones because of too great power The current that sound card will generate to operate columns.

Switching output output from headphones with headphone columns using branded sound card software

In some cases, the sound card will have either a separate output for connecting headphones, or a separate sound output mode to headphones through a general audio entrance, which must be activated through branded software.

For example, I use my Creative Sound Blaster ZXR audio card.

In my case, I need to manual mode Switch the mode of the sound card from the headphones columns, but you do not need to physically switch Jackie.

It is not very convenient, but fully justified, because This sound card has two physical jacks for connecting headphones and columns that have different signal amplification schemes and switch them is automatically impossible due to the design.

It is not very convenient, but completely compensated by excellent sound quality.