How to stick a protective glass on the iPhone 5S. How to glue protective glass on the phone

Among additional accessories for smartphones, protective glass is perhaps the most necessary components, since the gadget protects mechanical damage. Many owners mobile devices Such a popular brand as Apple gives significant amounts of money for new phone models, and of course everyone acquires protective glass to minimize the risks of damage to the cheap device. In this little review, we want to answer the question of users, how to glue the protective glass on the iPhone.

Be sure to prepare a clean workplace and put in order hand, they must be perfectly clean. Wipe the device screen with a special napkin and put the phone in front of yourself. Now remove protective film From glass to open the adhesive layer. If we are talking about replacing the protective glass, then after removing the old material on the screen, dried glue will remain, it will not be easy to remove it. Damn your clean drive with clean alcohol, carefully, slowly wipe, wipe the surface of the matrix with translational movements. Do not overcover, if you press too much, you can damage the device, then to replace the touchscreen you will have to contact Apple's service center.

• Remember, the most important thing is not to touch the glass with his hands, after you took off the protective film from it, otherwise the prints of your fingers will remain on the adhesive side, which will spoil appearance Gadget.

The jewelry accuracy in the process of gluing glass is extremely important, all edges must match the iPhone screen, so do not rush, so it does not spoil everything. So, open the film from the protective glass and compare it with the screen without touching the surface. Now you need to quickly stick the middle of the glass, the edges must lie for themselves, you will be left only from smooth. Due to the fact that we performed cleaning the surface, there should be no bubbles to form, that is, you can count on the perfectly smooth mirror surface of the iPhone.

How to glue the protective glassIPhone and what are the minuses

It is not difficult to stick the protective glass if you follow all the above rules, but similar to the additional accessory implies certain cons. First of all, it should be noted that the weight of the iPhone will increase, like dimensions, if it does not bother you, then safely glipe protection against mechanical damage to the gadget.

To protect your device screen, you need to know how to stick the protective glass to the phone. It is much stronger, at the same time flexible.

The film can protect the display only from scratches, and the protective screen prevents the cracks after the decline of the smartphone.

It should be very careful when buying universally glass, it may be poor quality.

Several tips for choosing:

• There are two types of glasses: glossy and matte. The first option is cheaper, however, it can protect the smartphone display only from shocks. Before buying, check the strength of the glass, it should not be too stuffed;
• Matte glasses are more expensive and able to protect the phone from shocks, fall and even from glare. The lack of such glass: the quality of the color reproduction of the smartphone will deteriorate;
• Good glass should have a oleophobic coating. It does not cover the coating in the fat;
• It is advisable to buy glasses in the set of which there are special napkins and spare protective glasses;
• The thickness of the glass, the higher its strength and the level of phone protection during strikes and drops.

Glass sticking process

Follow the instructions to glue additionally protective glass on your smartphone:

• First of all, clean your workplace. This clause is silent by many instructions on the glass sticker, however, it is very important to remove all the dust from the working surface. It is present even if you do not see it.
• Take a clean rag and tool for cleansing windows. Wipe the surface and wait for it drying. So you will remove the maximum number of dust and there will be less chances that they will fall under protecting glass;

• Disconnect the smartphone for the time of the entire procedure so that the screen does not turn on during the blending process;
• Take a wet napkin for cleansing and thoroughly wipe the phone display. You can buy similar napkins in the economic department of any store. Wipes are also suitable for cleaning points.
• Then wipe the display with a dry napkin to remove divorces and fingerprint traces;

• Take a protective screen. Spread the film on the other side that will lay down to the smartphone display;

• Now position the seclock - without touching, place it all over the area of \u200b\u200bthe screen. All steps must be done very quickly;

• Now carefully attach the glass, so that it is perfectly covered the surface of the phone and release it. Protective glass stacked independently. If you cleaned the surface of the display, air and dust will not arise.

What if you hit the air? If the air bubbles have arisen, go through the surface of the protective glass with a napkin, slightly pressed so that they go beyond.

After sticking, turn on the smartphone and check the operation of the sensor.

Important!Many smartphone owners are asked: Is it possible to relete the protective glass if it is unplugged? Perhaps too much the amount of dust or air under the screen interfere with it to fix it. Carefully delete it, wipe the smartphone display and repeat the sticker procedure again. Re-installation on the clean surface can solve the problem.

How to remove the protective glass?

Remove the protective glass is much more complicated than film. If you were incorrectly blocked, remove it using the bookmark, which is on the outside of the protective screen.

In most cases, the need to remove the protective screen occurs after a serious fall. When the screen is broken, the glass must be removed as careful.

The easiest to take plastic card (For example, the usual bank card) and pry the edge. Then walk the map under the entire surface of the screen, dischading it from the device.

Tip!So that the revealing process was easier, turn the phone screen in the palms.

Smartphone is a dear thing, requires careful handling. One of the most vulnerable places is a screen. Many in the course of operation repeatedly drop the phone, wear in the bag, where the keys and other sharp objects lie beyond him.

As a result, quickly even on a new smartphone appear chips, scratches, cracks, and then the screen can crash. But quite bye to extend the life to the device if you use modern technologiesFor example, purchase and install protective glass.

Outwardly, it looks like a film with similar tasks, the type of glass is transparent and flexible, but due to higher density is more reliable and more durable.

Protective screen for phone It costs somewhat more expensive than film, but it fully justifies its cost, as it reduces almost to zero, the probability of the screen is broken.

What is a protective glass for a smartphone - what functions performs

Before you know how to glue protective glass on smartphone screen, we will analyze it features.

Benefits should include:

• resistance to damage and scratches - can check it with keys or knife or scissors - traces will not remain,
• repayment of impacts - even when the phone is dropped down, it will not break down, only protective glass will damage, fragments of which will not be broken down in different directions,
• it holds reliably - more durable compared to the film, easily glued at home without special experience.

Disadvantages:

• the phone will become more voluminous and heavy,
• purchase and sticker glass will cost a decent amount
• requires accuracy during installation.

On average, the thickness of the protective glass is from 0.2 to 0.3 mm.

Glass has five layers:

1. Oleophobous - ensures the convenience of slipping the fingers across the screen, while prints are easy to erase with a cloth, protects against moisture,
2. Protective - responsible for the safety of the screen from scratches and cracks,
3. Anti-glare - does not allow the screen to fill up,
4. Deterrent - if the screen still managed to break, he will keep fragments,
5. Silicone.

Video instruction - glue protective glass on smartphone

How to glue a protective glass on iPhone - Phased instructions

Those who want to know how to glue the protective glass on the iPhone 7-6-5, it is worth it in mind that the overall algorithm of action is about the same for all phones.

The contents in the glass box can be slightly different from different manufacturers, but, as a rule, includes glass itself, a rag from the microfiber / napkin, an alcohol napkin and a sticky film for dusting. If something has not turned out, you can use instead of napkins and rags, remedies.

It is important to prepare a workplace - it can be a table or another smooth horizontal surface. The lighting should be sufficient not to miss the divorce and dust during gluing.

Instruction - How to glue Protective Glass on iPhone 7-8

You can glue it yourself without much difficulties according to the following algorithm:

1. Disinfecting your hands so that there are no dust and other contaminants on the phone and film.
2. Apply the protective glass on the smartphone for fitting. If you are afraid to stick crooked, there are special stickers in some sets (you can replace with scotch). We glue stickers from one side fixing the correct position of the glass.
3. We fold down the glass.
4. We wipe the smartphone screen with a wet cloth from the set, then wipe dry with a second cloth from the set. We take the adhesive film from the set and applying to the screen remove the smallest dust.
5. Remove the protective film from the substrate.
6. Apply / omit the glass to the screen so that all cutouts exactly coincide.
7. The napkin is smoothed from the center protective glass and make sure there are no air bubbles and dust.
8. Check the sensitivity of the screen to the finger.

VIDEO

The whole process will take about 10 minutes. The developers thought all to the smallest detail, so there should be no difficulty with gluing.

Unique properties allow you to create maximum protection with maximum convenience for the owner of the popular smartphone iPhone. 7.

You can purchase protection via the Internet and in specialized accessories stores for Apple products, and stick yourself without resorting to the help of professionals.

Few people get the first time to glue the glass perfectly, since air bubbles remain under it. Dry cloth will remove them to remove them - put it on the screen and push the air outward.

If dust fell under the glass, flexing it from the right side and remove the dust of the scotch, then we reappear the glass to the screen.

Now, knowing how to properly glue the protective glass on the iPhone 7-6-5s, you can save and protect your phone yourself without resorting to expertly experts.

If you have become the best owner of the iPhone 7-8, take care of its protection against scratches and other damage from the body. Make it very simple - use Baseus Pet Soft 3D or Bronoskins protective glass.

Overview of protect glass on iPhone housing 7

Protective glass for iPhone 7 Baseus Pet Soft 3D 0.23 mm has a number of advantages compared to conventional glass.

Benefits:

1. Soft edges.

The edge of the glass is made of a special PET material, so the edge of the glass will not crack and crumble. It is not only convenient, but also safely.

2.3D rounding.

If ordinary glass closes the direct part of the display, the Baseus Pet Soft glass completely covers the smartphone screen, closes all curved extreme surfaces.

3. Studacity 9H.

With the minimum thickness of the protective glass, the strength remains very high, so it can withstand shocks, preventing chip and scratches.

4. The power is only 0.23 mm.

Glass is ultra-thin, but at the same time all its protective qualities are preserved. Your phone will be under strong and durable protection.

Video Description

How much is the protective glass for phones

Today, hundreds of companies around the world are engaged in the production of protective glass.

The most budget options, of course, are offered Chinese firms whose products can be easily ordered via Aliexpress.

However, the production of any manufacturer - tempered glass, differs only to its quenching.

The price may vary significantly depending on the quality indicators, as well as the firm of the manufacturer.

So, for iPhone 6, you can purchase anti-reflective glass DF iblickglass-03 with a transparent matte surface and 9H hardness. The cost of it begins from 1,500 rubles.

As for simpler options, for example, Chinese production, on average, the cost of them starts from 900 rubles. This is almost twice as high as films. Many are wondering - is it worth overpaying?

Maybe stay on the film?

The film copes with scratch protection, but when it is dropped, it can not always protect the screen from cracks. It is more difficult to glue, often air bubbles remain, inside the dirt is quickly clogged. Glass in this regard is more convenient, it will last longer and provide more reliable protection Screen. However, for these amenities really have to overpay.

If you are glued glass, you will not have to additionally pay the services of a specialist who will take this task for yourself, and this is a few hundred rubles. There are such masters in any service centers for the repair of phones, as well as in stores for the sale of smartphones.

Thus, the cost of buying and installing glass on the smartphone will be at least 1,500 rubles, but it is really profitable, because the replacement of the crashing screen will cost an average of 3000 rubles, especially if we are talking about Apple products.

Smartphone is a dear thing. Even purchasing a budget class device from 5 to 15 thousand rubles, we want it to serve for a long time and right. The loyalty of the gadget, in turn, depends on the two parameters: internal and external. And if on the first (submitted by the hardware) we can not affect, then overcome the external factors, we are as much as possible. We can protect your smartphone if not from drowning, then from mechanical impact certainly. And will help us in this glass on the phone. How to glue it? We will talk about it today and talk.

What does the protective glass need

It is difficult to disagree that the long use of any smartphone does not imply the appearance of chips, cracks, scratches, scratches. This fate is characteristic not only for the side faces, the upper and lower ends and the rear panel, but also for the front part. And there is hardly the most important element - the smartphone screen. Protective glasses were invented precisely to protect the device display. You can use the film, but it has a smaller protection coefficient. In any case, it is important to know how to glue protective glass on the phone.

What it is

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, it is considered to be considered a more reliable component, since it has a greater density compared with the film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost and more expensive films. However, it is worth it, especially in cases where there is either the high probability of mechanical impact, or when the gadget is truly expensive. For everyone, this is a plank different, but most users prefer to buy glass if their devices cost more than 10-15 thousand rubles. Buying the user reduces the likelihood of damage to the main screen to virtually zero, since the entire blow to itself will take the above component. Before talking about how to glue on the phone, I would like to focus on the benefits of the element.

Functions and beneficial properties

A lot about protective glass features will not say. From his name, it is clear why it was developed and for which it is intended. Whether the work is the features that can be spent on the clock. Their list, for example, includes scratch resistance and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after the indicative test. For this you can use ordinary keys. Spend pointed edges on the glass, and you will see that it is really not covered with traces.

The second beneficial property of protective glass is trimming. We were already mentioned in briefly about this. A large number of smartphones when the screen is dropped down the screen, physical damage is obtained until the display is completely broken. With a protective glass, this problem will be solved, because instead of the screen it will break. By the way, the word "breaks down" here also should be understood a little different from his usual value. Shards from telephone protective glass will not fly to the sides. Finally, it is possible to note the fact that the glass holds quite and very reliable. Especially if we compare it with a simplified element - film. Users who often ask questions about how to properly glue the glass on the phone, can be refressed by learning that this operation does not need to have some special experience.

We consider a complete set

A very large number of requests is due to how to glue a film (glass) on the phone "Iphone 6". However, it should be understood that the process is in general, similar to other devices. Why then stop on specific modelsif you can describe the operation universally? First of all, let's see what is in packing with a protective glass? Different manufacturers Offer various equipment, but usually there is glass, alcohol napkin and a rag from a special material. If there is no cloth or napkins, then you can use a healthy analogs, it is non-nodded.

Glass for phone: how to glue? Prepare the surface

If you have previously installed a film or glass, these components will need to be deleted. To do this, remove the case if it is, then cling the element for the edge. To prevent the appearance of oily spots on the glass, you should preach to wash your hands in advance and dry them. By the way, the workplace preparation remains an important stage. Need a smooth horizontal surface and powerful lighting. This may be, for example, the table. Lighting will help to avoid the occurrence of unnoticed divorces and dusty sites. So what is needed to integrate the glass on the phone? How to glue it? The correct operation will only be in the event that the "naked" screen is in advance.

Why need cleaning

Clean the screen freed from the film or glass is needed in alcohol with a wet disk or alcohol. Wipe the screen should be carefully so that there are no contaminants left on it. After that, it should be wiped with a special cloth if it is included. If not, then you need to find analog. Now it's time to make glass on the phone. How to glue? We learn further.

The most important stage

On the adhesive side of the glass there is a special film. It must be removed. After that, we apply the glass itself to the screen. Carefully make sure that it is aligned along the edges of the device, combined with the speaker and control elements. By the way, you need to remember that it is possible to keep the protective glass only by the edges. Only in this case the traces after the operation will not be. When the fit will be completed, just lower the component on the screen. Glass will stick itself. Great, now we know how to glue the glass on the phone.

There are mines

Yes, like other elements, protective glass has some disadvantages. Some users who are interested in may think that the main drawback is the indicative complexity of the integration process. They say if it is incorrect to stick for the first time, then you will not do anything already. In fact, now it's not about this. The main disadvantage of this component is the fact that the device for which you will glue it will become more voluminous and heavy. However, if it does not confuse you, and you are not very sensitive to the mastery of the phone, but you want to protect it, you can contact the salons cellular communication. There will be offered not just the best products, but for extra money will be able to glitably stick glass.

Submarine stones and tricks

Most users are afraid of air bubbles. Rather that they will remain. Few people can boast that the protective glass is neatly the first time, and there are no bubbles. However, you can easily cope with a dry cloth. The procedure is easy to horror: just squeeze bubbles from the center to the periphery. The ability to glue protective glasses will save money that takes this procedure in cellular salons.

Prices

Now protective glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options Presented, mostly Chinese firms, which could be expected. Nevertheless, they are not so bad. Glazes differ different brands among themselves only by quenching. Nevertheless, it should not be thought that the glass from the Chinese company will not provide the necessary degree of security. Now, after we learned how to glue tempered glass on the phone, you can move from words to business.

How to stick the protective glass on the iPhoneam owners iPhone. Try to treat the device as careful as possible. For this, various covers, bumpers and protective glasses are bought.

How to do it

Before glue protective glass, remove the cover from the iPhone. If the iPhone display is already covered with an old film or glass - boldly remove it. Wash your hands thoroughly so that the dirt did not get on the screen.

It is best to glue in a well-lit place to see each patcher that occurred to the device screen. Well, select the highest possible surface for glass stickers.

Start

Step 1. Clean the iPhone display.

To do this, use any microfiber cloth so as not to leave anything superfluous on the screen.

You can also use the alcohol napkin, and then wipe the display with a soft cloth with a soft cloth.

Step 2. Additionally, we clean the smartphone screen using complete screws or any other stickers.

Just touch the display of scotch and raise it back. The adhesive surface will collect dust residues.

Step 3. Now you need to remove the protective film from the adhesive side and attach it to the screen.

Important: Keep the glass by the edges, so as not to leave unnecessary traces on it.

Step 4. Gently put the glass on the iPhone screen.

If the glass is good, it will independently fall on the smartphone screen. But for the most confidence, it can be smoothed independently.

I spend your finger through the center of the smartphone and begin to smooth before removing all bubbles. If any small bubbles remained, take the plastic card and, slightly pressed, spend it at the places of formation of bubbles.

In this instruction, we used MOCOLL glass. And this is not just when you look at the iPhone with sadness, the display was covered with a ruthless mesh, thinking about the defense is already late. MOCOLL protective accessories manufacturing company took care of the consumer in advance.

All brand products are built in such a way that the buyer is spending a minimum time on sticking protective glass.

Considering that chinese brand MOCOLL (our review) produces protective glasses not the first year, behind the shoulders of the company's engineers thousands of hours conducted in research laboratories.

Glasses are made by high-tech equipment and a number of important properties are obtained during processing. Glasses from MOCOLL:

Possess the thickness of only 0.33 millimeters. Glass is uniformly and has an equal thickness anywhere. Among the manufacturers of glasses in Mocoll is one of the lowest percentage of percentage in production.

MOCOLL glasses easily endure the impact of sharp objects and does not scatter on shards when hit.

9H hardness on the Moos scale. Almost the diamond.

The glass contains a oleophobic coating, so after sticking, you do not feel any tactile changes from the iPhone screen.

MOCOLL delivers its products with a rich package. In the set there is everything to stick the glass without additional purchases and searches a piece of fabric or a plastic card to eliminate bubbles.

Mocoll has several options for protective glasses at once. 2,5D, 3D and advanced development - 3D-glasses with elastic edges for the color of the device body.

As you could make sure the MOCOLL protective glasses is very simple. Due to the presence of a special silicone layer, you may not worry about the appearance of hated bubbles during sticking.

For every taste, color and wallet

Mocoll, in the literal sense of the word, there are glass of any shapes and sizes. The range includes glass for tablets and smartphones (and not only Apple), there is protection and for MacBook.

Among the most interesting options, special glass with prefabrication from the glances.

It works so that after sticking, it is possible to see an occurrence on the display of an iPhone only under a certain angle. That is, you, as an owner, can calmly rewrite or watch a movie, and the passenger sitting nearby the bus will not see anything at all.

The glasses are arranged in such a way that the light emanating from the screen, making a picture inaccessible to others.

MoColl glasses are very popular. Many use this manufacturer's accessories. service centres And workshops. They are really very durable ..Wrapper (Padding: 10px;

# HID-Button, .hid (Display: None;)

# HID-Button: Checked ~ .hid (Display: Block;)

# HID-Button: Checked ~ Label (Background: # E4E4E1;)

# HID-Button: Checked ~ Label: Before (Content: Hide ";)

label (Display: inline-block;