Menu
Is free
registration
home  /  Firmware    / The computer does not see the lenovo a1000 phone. Connecting a Lenovo smartphone to a computer

The computer does not see the lenovo a1000 phone. Connecting a Lenovo smartphone to a computer

First you need to download the update itself. You can do this from our website - link.

Lenovo A1000 driver

  • Next, download a special driver for the phone from here. After downloading, unpack the archive into a folder that does not contain Cyrillic or spaces - this is important.
  • There are two versions of drivers for 32-bit Windows and 64 in the archive. We launch the one that suits your OS as an administrator (right-click on the exe file and click "Run as administrator".
  • We wait a few seconds and restart the PC.

Lenovo A1000 manual

  • After installing the drivers, download the flasher program from here.
  • Similarly, we unpack it into a folder that does not contain Cyrillic or spaces.
  • Run the exe file as administrator and the program window should appear:
  • Next, you need to click on the gear icon and select the previously downloaded firmware from the computer (link at the very top of the article). If this step was successful, then on a green background in black letters you will see the name of the update.
  • Click the “Play” button and click “Yes” in the pop-up window.
  • We take the smartphone and turn it off. Then we hold down the volume key + and at the same time connect the cable to the computer, when you hear the characteristic sound of connecting to the PC, then release the key.
  • Download starts - the progress can be seen in the same program.
  • When the files are fully loaded you will see a green Passed text. Now press the button in the “Stop” program and disconnect the smartphone.

Inexpensive smartphones from the Lenovo product line were preferred by many brand admirers. One of the budget solutions that have gained great popularity due to the good price / performance ratio is the Lenovo A1000 smartphone. A good overall device, but requiring periodic updating of software and / or firmware in case of a certain number of problems or “special” wishes of the owner for the software part of the device.

We will deal with installation and update issues in more detail lenovo firmware A1000. Like many other smartphones, the device in question can be flashed in several ways. We will consider three main methods, but it should be understood that for the correct and successful execution of the procedure, you will need to prepare both the device itself and the necessary tools.

Each user action with his device is performed by him at his own peril and risk. Responsibility for any problems caused by the use of the tools and methods described below lies only with the user, the site administration and the author of the article for the negative consequences of any manipulations are not responsible.

Lenovo A1000 drivers must be installed in advance, before any manipulation of software part   apparatus. Even if it is not planned to use a PC to install software on a smartphone, it is better to install the drivers in the owner’s computer in advance. This will allow you to have at hand a practically prepared tool for restoring the device if something goes wrong or in the event of a system crash, which will lead to the inability to start the phone.

  1. Disable driver digital signature verification in Windows. This is a mandatory procedure in almost all cases when manipulating the Lenovo A1000, and its implementation is necessary so that Windows does not reject the driver needed to interact with a device that is in service mode. To perform the procedure for disabling driver signature verification, follow the links below and follow the instructions in the articles.

    2. Additionally, you can use the information from the article:

  2. Turn on the device and connect it to USB port   a computer. To connect, you must use a quality, preferably "native" for Lenovo uSB cable. Connecting the device for firmware needs to be carried out to motherboard, i.e. to one of the ports located on the back of the PC.
  3. Turn on in the smartphone USB debugging:

  • Install uSB driver. You can download it from the link:

  • The next step is to install a special “firmware” driver - ADB, download it from the link:

    • Methods for flashing Lenovo A1000

    Lenovo is trying in a certain way to "monitor" the life cycle of released devices and eliminate, if not all software errors that occurred during use, then critical ones, for sure. For Android devices, this is done using ota-updates of certain component parts device software that regularly comes to each user via the Internet and is installed on the phone by an Android application System Update. This procedure takes place almost without intervention of the owner and with the preservation of user data.

    The methods described below (especially the 2nd and 3rd) allow you to perform not only the Lenovo A1000 OS update, but also completely rewrite the sections internal memory   devices, which implies the removal of data previously contained in these sections. Therefore, before you start using the utilities and methods described below, be sure to copy important information   from a smartphone to another medium.

    Method 1: Lenovo Smart Assistant

    If for some reason an update using an Android program System Update   not feasible, the manufacturer suggests using it to service the device proprietary utility   Lenovo Smart Assistant. Using the method in question can be called firmware with a big stretch, but to eliminate critical errors in the system and keep the software in an updated state, the method is quite applicable. You can download the program by, or from the official Lenovo website.


    Method 2: Recovery

    Installing firmware from Recovery does not require use special utilities   and even a PC, except for copying the necessary files. This method is one of the most common, due to its relative simplicity and high efficiency. The use of this method can be recommended for the forced installation of updates, as well as in cases where the smartphone cannot boot into the system for any reason, and restore the functionality of incorrectly working phones.

    Method 3: ResearchDownload

    The Lenovo A1000 firmware, using the ResearchDownload utility, is considered the most cardinal method. Under consideration softwareDespite its apparent simplicity, it is a rather powerful tool and it is necessary to use it with some caution. Recommend this method   it is possible for those users who have already made attempts to flash the phone using other methods, as well as in the case of serious software issues   with the device.

    To work, you will need the firmware file and the ResearchDownload program itself. Download what you need from the links below and unpack it into separate folders.

    1. It is advisable to disable antivirus software for the duration of the procedure. We will not dwell on this item in detail, disabling the popular antivirus software   described in detail in the articles:
    2. We install USB and ADB drivers if they are not installed earlier (how to do this is described above).
    3. Launch the ResearchDownload program. The application does not require installation, to launch it, go to the program folder and double-click on the file ResearchDownload.exe.

    4. Before us is the ascetic main window of the program. In the upper left corner there is a button with a gear image - “Load Packet”. Using this button, you can select the firmware file, which will subsequently be installed in the smartphone, click it.

    5. In the window that opens Conductor   go along the path of the location of the firmware files and select the file with the extension * .pac. Push button "Open".

    6. The process of unpacking the firmware begins, as evidenced by a filling operation progress indicator located at the bottom of the window. You need to wait a bit.

    7. The successful completion of unpacking is indicated by the inscription - the name of the firmware and the version located at the top of the window, to the right of the buttons. The readiness of the program for the following user commands is indicated by a mark "Ready"   in the lower right corner.

    8. Make sure the smartphone not connected   to the computer and press the button.

    9. Turn off the A1000, distort the battery, hold down the button “Volume +”   and holding it, we connect the smartphone to the USB port.
    10. The firmware process begins, as indicated by the inscription in the field "Status"as well as a filling progress bar. The firmware procedure takes about 10-15 minutes.

      11. In no case should you interrupt the process of downloading software to your smartphone! Even if the program seems to freeze, do not disconnect the A1000 from the USB port and do not press any buttons on it!

    11. The completion of the procedure is indicated by the status "Finished"   in the corresponding field, as well as the inscription in green: "Passed"   in field "Progress".

      12.    and close the program.

    12. We disconnect the device from USB, “distort” the battery and start the smartphone with the power button. The first launch of Lenovo A1000 after the above manipulations is quite lengthy, you need to be patient and wait for Android to load. If the firmware is successful, we get the smartphone in the out of the box state, at least in the software plan.

    Conclusion

    Thus, relatively safe and efficient firmware lenovo smartphone   A1000 can be implemented even by not the most trained user of the device. It is important only to do everything thoughtfully and clearly follow the steps of the instructions, not to rush and not to make rash actions during the procedure.

    Lenovo is rapidly capturing the global market for high-tech gadgets, offering users low-cost, but very powerful and productive laptops, tablets and smartphones. The number of equipment from this manufacturer is constantly increasing, and, therefore, questions arise about its operation. Today we will discuss how to connect Lenovo to a computer.

    Connection

    We have already studied how to connect HTC to a computer. Considering that all Andoid smartphones will connect with other devices on the same principle, users should not have any problems connecting Lenovo to a computer. However, there are some features that will be discussed below.

    USB cable

    The easiest, most convenient and logical way to connect your smartphone and computer is to use a USB cable.


    You have activated the connection. Go to “My Computer” - two removable media should appear here (if there is no memory card in the smartphone, there will be one media).

    When connected via USB, some functions mobile device   will be unavailable.

    In fact, the smartphone will work like a regular USB flash drive connected to a computer. You can copy and transfer files, as well as delete them from your phone or memory card.
    Using a USB cable or HDMI cable, you can connect your smartphone to a TV and play multimedia content on a large screen. If you don’t have a USB cable, you can set up bluetooth on your laptop and connect Lenovo with it. Another way is to connect using the program.

    Modern users are often faced with the need to connect a Lenovo smartphone to a computer. For example, it may be necessary to transfer photos that were taken by the phone’s camera, or to download the program. How to connect Lenovo to a computer? It is worth noting that the firmware sometimes does not provide a phone as an external drive. This means that you should not wait for a new disk to appear in the My Computer section. In such situations, you have to act differently.

    Cord connectionUSB

    How to connect Lenovo phone to a computer using a USB cable? To do this, perform the following sequence of actions:

    1. Connect the USB cable to the computer.
    2. On the phone, select the MTP mode.
    1. Then it is worth looking at the computer. First you need to go to the “Start”, and then click on “Devices and Printers”.
    2. When a new window opens, the device that is connected should appear in it. However, this is only if the drivers are installed correctly.

    1. You need to right-click on the displayed device and go to the "Browse Files". Select the name of the device.

    1. If you have a memory card in your smartphone, two different disk drives will appear. If she is not, then he will be alone.

    When all the actions are completed, it remains only to select the required disk and carry out the necessary manipulations with it. Their principle is similar to working with ordinary disks. There is the ability to copy, delete, move data.

    Program   Wi-Fi File Transfer Pro

    When you need to transfer data from a smartphone to a computer or vice versa, it is not necessary to use a USB cable. You should use a program called Wi-Fi File Transfer Pro. It provides access to the phone using an outbred network.

    So, you will need to perform the steps in the following order:

    1. Download and install the program on the phone. Launch her.
    2. Visit the "Settings" section.
    3. Put code that is able to protect the connection. To do this, you need to specify a password, and then confirm your action with the “OK” button.

    1. Return to the main menu, and then press “Start”. As a result, a notification will be displayed on the screen in which the address will be indicated. If you click on it, the files stored on the phone become available.

    After that, the user will need to enter the address that is received in the notification.

    The computer does not seeUSB: what to do?

    Sometimes, when connecting a USB cable, unforeseen situations arise that are caused by the fact that the computer simply does not see the available connection. What to do in this case?

    All the problems that are the causes of such a problem are divided into hardware and software. In the first case, you will need to look for a malfunction in the port, phone, computer or cable damage. At software crashes   the reason is settings, system or drivers.

    First of all, it is recommended that you reboot both devices. If it did not help, you need to look for another reason and ways to fix the problem. It happens that the problems are connected with the breakdown of the port. In this case, you just need to rearrange the cord to another port. It happens that the cause of the malfunction is damage to the cord, it must be eliminated.

    If the drivers have flown before connecting Lenovo to the computer, they need to be reinstalled. You may have to “conjure” with the settings, but this is already individual. The actions taken depend on the problem itself.