entranceCreating a ringtone on an iPhone through Aytyuns. Creating a ringtone for the iPhone and adding it to the device
Sometimes using iPhone. It becomes problematic. Especially when it comes to installing your own ringtones. However, the complexity occurs only when you install the signal for the first time. After passing on a simple and convenient instruction, you can easily figure out how to make a ringtone on an iPhone.
Creating ringtone
1 step
It is easiest to create a ringtone on iPhone through iTunes - this is the best and most convenient program For the task under consideration.
To start the iPhone connects through the computer to iTunes. Then you need to choose a melody from the mediotek or add a new one.
Important! Rington's length on iPhone may be no more than 30 secondsTherefore, choose your favorite part in advance - it will be necessary to trim in iTunes.
And even before proceeding to the creation of ringtones, make sure that you have a check mark "Synchronize all sounds", as shown in the screenshot. In the future you can choose which ringtones to leave on the phone.
2 step
The whole procedure is shown in detail in this video:
We tried to do the same. The result confirmed by screenshots is below.
You need to right-click on the selected melody and select the "Details" item.
A window will open in which to open a tab called "Parameters". Here you specify the part of the song that will be played when playing when you call or SMS.
Near the launch lettering, it is selected, and near the "stop time", respectively, the end of the ringtone. Click OK and move on.
3 Step
Now you need to click on the name of the selected song with the right mouse button and choose "Create a version in AAS format".
After a few seconds, a track appears with the same name as the selected song, but it will be 30 seconds.
4 Step
Now click on the short track right-click and select the "Show Windows Explorer" item.
A new window will pop up in which there will be only one track that you transform into the ringtone. This track will be in M4A format. The format will need to change to MP3, simply renaming it.
Note: If the format is not displayed, you need to enable the file extension display feature.
5 step
When the file extension has changed to MP3, you can close the conductor. Now stayed simple procedure The iPhone synchronization that needs to be executed in order to download the result on your gadget.
Install the ringtones on the phone
The latter, it's the most pleasant, after all these procedures - install the Ringtone on the iPhone.
To do this, in the iPhone in "Parameters", open the items "Sounds" \u003d\u003e "Ringtone".
Here, instead standard Set Apple sounds will appear new created by you. In order to put a ringtone on the call, follow these steps:
That's all, the creation of ringtones for the iPhone will no longer be a problem for you.
Enjoy your favorite music on your favorite phone.
You are tired of the standard melody on your iPhone. You can make it yourself, paying for this 15 minutes. Yes, it's true, it's not as usual, chose mp3 song and pressed the ringtone. Here everything is more difficult, of course, there is a simple way, but it is paid through the iTunes Store. Oh, these Americans, forever free buttons hide very deeply and without instructions not to understand. But the ability to do it yourself through iTunes. Let's learn this, and relieve your laziness.
To create a ringtone for an iPhone, we need:
- ITunes program;
- Song or melody in any of the main formats (MP3, MPEG, etc.);
- "Explorer" or other file manager.
The main prepared. But the iPhone can only be installed a melody up to 30 seconds, it should also be in a strange M4R format. Baister!
The process of creating and installing ringtones on the iPhone is divided into 4 stages:
- Creating a ringtone melody segment
- Conversion to M4R format
- Rington injection in iPhone
- Installing the Rington Created to Call or SMS
Attention! If you already have a ringtone in the required format, then immediately go to step number 3. Need to create a melody in M4A format? Then create it through standard Program iTunes.
Step 1: Create a segment of rington ringtones from the selected song
1. Run iTunes program. Click on the "Song" button. We go to the iTunes menu item, for this click on the button in the upper left corner of the program. Press the item "Add file to a library ...", specifically all circled:
2. Select our file with a song or music (MP3, MPEG, etc. Format):
3. Our melody appeared in the library. Now choose it and click right-click on it. In the drop-down menu, click "Information":
iTunes will try to find an album cover to which the composition belongs. We will have to wait for the end of the process, oh, this iTunes with its automation.
4. A window appeared, select the "Parameters" tab. We celebrate the tick start and stop, as shown below. Here we and do it and cut it to the 30 seconds we need. We can change these parameters, but without the possibility of listening to the fragment it is meaningless, although you can use any MP3 player in parallel. Chose a fragment and press the "OK" button:
I exhibit the desired range of the composition, but know, it should not exceed 30 seconds.
5. Select the resulting melody and click on it right mouse button. We choose "Create a version in aAC format" Here it is converted to a special format that suits iTunes:
We got a musical segment with a duration of 30 seconds. In the format "AAC". It has the extension "M4A".
Step 2: Convert M4R format, or rather simply rename the extension from the file
1. Open the folder with our melody. In iTunes, you should click on the melody and click the "Show in Windows Explorer" item:
2. In the window that appears, click the right key on the file and select "Rename":
3. Change the type of file to "M4R", press "ENTER". For a flying warning, click "Yes":
If you do not see the file extension, but only its name, then you should in the folder settings turn on the Show Show Extension from the file. How to do - Start - Control Panel - folder parameters - switch to the View tab - find item "Hide extensions for registered types" and remove the checkbox.
Ringtone for calls is ready. Congratulations, the most difficult stage is overcome. It's time to throw it into the phone.
Stage 3: How to download a call melody in iPhone 3G, 3GS, 4, 4S, 5, 5s., 5 c. throughiTunes.
1. We connect the iPhone with a computer, be sure to end the synchronization. IN program iTunes. Click in the upper right corner on iPhone:
2. Go to the "Sounds" tab. We put a tick "Synchronize sounds". Click "Selected Sounds" and put a tick next to the ringtone. Click "Apply" in the lower right corner:
3. After the process is completed, click the "Finish" button and further "apply":
Our new, free Created Ringtone, is fried on the iPhone.
Stage 4: Change the standard melody to the new ringtone in iPhone for a call
1. Take into the hands of the phone and go to the "Settings":
2. Go to the "Sounds" section.
3. Scroll down and choose the field "Ringtone":
4. Select the ringtone made and enjoy incoming challenges:
SMS, calls, mail, reminders, programs and widgets are changed in the same way. Now you can put the ringtone on your iPhone yourself and change them absolutely free.
join us in
GarageBand knows how to add ringtones for free, using any tracks in the memory of your iPhone!
I am like new owner iPhone XS Max bought ringtones in App Store.But miraculously stumbled upon this method.
Voila! I have a bunch of free ringtones.
What need to do
1 . Download and go to the GarageBand program, someone has it according to the standard.
2 . Choose Create new Live. Loops, click on the plusion on the left and add a LUP.
3 . Choose from three options on top of the music tab.
4 . Go to the song, choose the composition you like and click on the square.
5 . Drag it up, putting on the first place, click ready!
6 . Press Record (Red circle in the middle) and after 3 seconds we tapa on the elder at the bottom of the screen, below the icons of your magnifier.
7 . Went record. We are waiting for about 35-40 seconds and pushing the stop.
8 . At the top left, click on the arrow and choose my songs.
We go to the main -\u003e sounds -\u003e ringtone and choose our track!
All is ready!
So you can add to the call any your songs! Also through the menu Export You can send a trad on messenger, message, etc.
I kept B. wav- Format, passing it into the social network VKontakte! There you can make a track cover and change the name.
If you want to set any track from the iPhone media library as a call, you will not have anything. It is connected with a restriction on the ringtone - not more than 30 seconds.
You can change the standard ringtone in one of the following ways:
1. Buy in iTunes Store.
Run by iPhone app iTunes Store and go to the "Sounds" tab. Here you will find an extensive media library of finished ringtones in various styles at a price of 19 per ringtone.
The advantage of this method is the simplicity. The disadvantage is that among the finished ringtones may not be the song you need, or it will not be the fragment that you would like to hear on the call.
2. Create yourself.
To do this, you will need:
favorite track bought in iTunes;
a couple of minutes of free time.
The song should be purchased in the iTunes Store and downloaded on the iPhone. Tracks out Apple Music. Do not fit, as they have digital protection.
Create Ringtone in GarageBand for iPhone
Step 1: Run GarageBand on the iPhone. Before you there will be several musical instruments. Select anyone to start.
Step 2: Click on the "Record" button and play a pair of notes.
Step 3: Stop recording the track by clicking again on the "Record" button. In the upper left corner will appear the "Track Mode" icon. Click on it to switch to this mode.
Step 4: Press the plus size in the upper right corner to get into the section menu.
Step 5: In the section menu, you need to increase the number of clocks. Click on the section A to go to the settings.
Step 6: Here you need to manually increase the number of clocks. Touch the arrows to bring the number of clocks to 60. Click Finish.
Step 7: Now go to the magnetic menu by pressing the appropriate icon from the loop.
Step 8: Switch to the "Music" tab and select the song you want to install as ringtone.
The song should be purchased in the iTunes Store and downloaded to the device.
Step 9: Holding the finger on the title, drag the track to a separate path.
Step 10: Two tracks are your recorded track and a selected song. Select the recorded track, then delete it.
Step 11: Reduce the song on both sides so that only the 30-second segment you need remain. If the fragment is greater, GarageBand will automatically do it.
Step 13: Select the Ringtone option, assign a name to the track and click Export.
Step 14: As soon as exports end, you can set the resulting melody as ringtone, sound incoming message Or assign a certain contact.
The exported melody will appear in the Sounds section. To find her:
Go to the "Settings"\u003e "Sounds" menu.
If you dream that your iPhone sounds somehow different, you can install instead of standard sound signal, your favorite melody. And you can do this by completing simple tinctures of your gadget using the iTunes application.
To do this, you have to choose the duration of the audio track (about 30 seconds), change the song format and add the created media file to the iTunes folder. It sounds, of course, seriously, but in fact it is not so difficult. The main thing to adhere to the following instruction.
Run the iTunes application - "File" - "Add file to the library". Highlight the desired song and click "Open".Purge the mouse to the added object and the left button open the Advanced Menu. Selects the "information" string. IN open menu Allocate the "Parameters" section. Manually set the ringtone sound interval (maximum 39 sec.) And click "OK". Open again context menu The left button and click "Create a version in AAC format".
If there is no such category, go to another expensive: "Edit" - "Tincture of Import" - "Code AAS". Again click on the mouse and allocate "Copy". Press in the left corner of the "Start" monitor - "Music". IN open file "Music" create new folder With the name "Ringtones". Open the created folder and choose "Paste". Make a chain from the source "Start" chain, then open the "Control Panel" and following "Parameters / Folder Properties". Clean the label opposite the subparagraph "hide permissions for registered types ...". Open the created "ringtones". Click on the mouse and replace the M4A format to fit M4R.
