entranceWatch G Shock. How to configure Casio G-SHOCK watch - by universal instructions or module
In this material we will try to explain general principle Time settings in G-shock-ah on the example of specific popular models of [which is very much in the market], disassemble the sequence of actions in detail. The logic of the work as a whole is repeated from the model to the model, it is only important for you to figure it out in the basic configuration processes. Keep in mind the adjustment of the arrows and e-time is completely different. Digital display is easier to operate, but for the arrows you need almost memorizing the sequence of actions. As part of the article, the time setting process will be described for:GA-100, GA-110, GA-120, G-2900, GA-1000.
If your watch did not get into this list, you can still get acquainted with the setting, or go to for G-shock.
Choose one of the series
Consider setting the time for the GA-100 series
First you need to make sure that the clock is in the current time mode. In this mode, the display shows the [or date] time and the day of the week, and the clock mode indicator indicates TIME [not all hours there is such an indicator]. It looks like this time mode:
- Check the "A" button [in the upper left corner] for about 3 seconds. The city code will flash on the digital display for which the current time is configured.
- Press the "C" button to go to the desired setting parameter in the following. Sequences:
- If you have chosen to correct a second (the image of the seconds flashes), press the "D" button to reset the counter value of seconds to 00. If you press the "D" button when the counter of the seconds is valid between 30 and 59, then the meter value will be set to 00 and 1 will add To the meter counter, if the value of the counter will be between 00 and 29, the change in the meter will not happen.
- To change the minutes of minutes, etc., use the "D" button to enlarge and the "B" button to reduce the values.
- After the installation is completed, click the "A" button to return to the current time mode.
There are situations where analog timedoes not match with digital, i.e. Arrows and numbers show different time. This can happen for several reasons: strongly magnetic effects on a clock or blow, etc. In this case, you need to manually adjust the position of the arrows.
Consider setting the time for the GA-110 series
First you need to translate the clock to the current time mode. In this mode, the display shows the [or date] time and the day of the week, and the clock mode indicator indicates TIME [not all hours there is such an indicator]. So it looks like the current time mode at GA-110:
- Holding the buttons in the pressed state allows you to change the values \u200b\u200bwith a greater speed.
- The day of the week is installed automatically according to the date.
- You can set the time value in the range from 2000. until 2099g.
In case of the deviation of the arrow time from the digital [from the magnetic effect or strong impact], you need to make the following actions:
- An hour and minute arrows should go to the position of the current time value, and the speed arrow is in position 0.
- Pressing the "C" button on this stage will return you to the settings of paragraph 2.
Consider the time setting for the GA-120 series
Translate the clock to the current time mode [it is usually default]. The display displays the time [or date] and day of the week, and the clock mode indicator indicates Time [not all hours there is such an indicator]. That looks like:
- At the end of the settings, click the "A" button to return to the current time mode.
- If you do not press the buttons for some time, the clock will automatically go to the current time mode.
With strong impact or exposure magnetic field On the clock, the shooter may not coincide with the digital. To do this, the manufacturer has provided a manual adjustment of the arrows:
Consider the time setting for the G-2900 series
First you need to translate the clock to the current time mode. In this case, the dial displays the current time and date. This looks like the current time mode in G-SHOCK G-2900:
Consider setting the time for the GA-1000 series
Before configuring, make sure that the clock is in the current time mode - the current time and date is displayed on the screen, and the modes arrow indicates Time. This is how the current time mode does GA-1100 looks like:
A strong blow or the impact of the magnetic field can knock down the arrow, and the analog time will not match the digital. In this case, you need to manually correct the position of the arrows:
- In the current time mode, press and hold the "A" button until the "H-SET" appears in the top display. The second arrow will move to 12:00 hours. After pressing the "A" button on the clock display, the "ADJ" indicator will appear, be careful and do not release the "A" button until the "HSET" appears.
- To select the arrows when adjusting, use the "D" button: the second arrow is an hour arrow - minute arrow - arrow of the mode display. In this case, the corresponding arrow will switch to a 12-hour position, and the following values \u200b\u200bwill appear on the bottom of the clock: 00 when selecting the second arrow, 0:00 hours and minute arrow, sub arrow modes
- If the arrow does not switch to the position of 12 hours, go to 3 points.
- To adjust the position of the arrows, use the "E" and "B" buttons. Holding the button in the pressed state allows you to change the value with a greater speed.
- At the end of the settings, click "A".
We reviewed the time setting only for the most popular G-Shock hours. If you have another model, then you can find a G-Shock watch module:
* The module number is located on back cover hours - usually 4 digits (easiest to search with the search Ctrl + F on the keyboard)
DW-5600.
- G-2900
- G-9000
- G-9100
- G-7700
- G-7710
- GW-9200
- GW-9010
- GLX-5600
- GW-M5610
- GW-5000
- GW-5510
- GLS-5600
- GW-6900
- GWF-1000
- GW-7900
- G-7900
- GLX-6900
- GW-2310
- GW-9110
- GX-56
- GWX-5600
- DW-6900
- DW-6901
- DW-9052
- GDF-100
- G-9300
- GW-9300
- GD-100
- GF-8250
- GD-200
- GR-8900
- GWX-8900
Comes! For the future, if not or lost passport (instruction) to the clock, then you here: http://www.avangard-time.ru/info/instrukt/
And now in Naming, Sergey Yudina, i.e., about his sports clock:
User's manual
Battery.
At the first signs of malnutrition of nutrition (the fuzziness of the image or
no backlighting) It is necessary to replace the battery with the nearest dealer or
distributor of Casio. In the hours you purchased, contain
battery installed by the manufacturer for test tests, so the term
this battery service compared with the standard will probably be reduced.
Protection against water.
The clock is classified by discharges (with i according to V discharge) in accordance with the degree
their protection of water. Specify the discharge of your clock using the above
below the table to determine the rules for their use.
Notes for relevant sections.
I. The clock is not protected from water. Avoid hitting any moisture.
III. If the clock was exposed to salted water, then rinse them thoroughly
and wipe dry.
IV. If the clock was exposed to salted water, then rinse them thoroughly
and wipe dry.
V. Watches can be used when diving with scuba (except
such depths in which the helium-oxygen mixture is required).
ATTENTION!!!
Press buttons under water
Care for your clock.
Replacing the rubber gasket that protects the clock from the fall of water and
dust, must be carried out every 2-3 years.
If moisture fall inside the clock, then check them immediately
the nearest dealer or distributor of the company S-Shock.
Do not expose hours to the effects of too high or low.
temperatures.
Although the clock is designed to use them in conventional conditions, not
less, you should avoid coarse treatment and prevent them
Do not fasten the strap too tight. Between your wrist and
the strap must pass a finger.
To clean the clock and strap, use dry soft fabric, or
soft fabric moistened in aqueous solution Soft neutral
detergent. Never use easily evaporating
means (for example, such as gasoline, solvents, spraying
cleaning products, etc.).
When you do not use your clock, keep them in a dry place.
Avoid hitting the watches of gasoline, cleaning solvents, aerosols
from sprayers, adhesives, paints, etc. Chemical reactions,
caused by these materials lead to damage to the gaskets,
cases and polishing hours.
A feature of some clock models is the presence of their strap
images performed by silk screen. Be careful when cleaning
such straps so as not to spoil these drawings.
For watches with polymer straps ...
You can detect a whitic powder substance on the strap.
This substance is not harmful to your skin or clothing and can be easy.
removed by wiping with a soft cloth.
Hitting the polymer strap sweat or moisture, as well as storing it
in high humidity conditions may damage, rupture
or cracking the strap. In order to provide a long
the service life of the polymer strap, as often often wipe it from
mud and water with soft cloth.
General description of modes of operation.
Figure shows general form hours in the current time mode.
Click the 'C button to go from the discharge into the category in the following sequence:
Current Time Mode → Sound Signal Mode →
→ Security mode → countdown timer mode → Current time mode.
In any mode, press the 'A button to turn on
display backlight.
Current time mode.
Setting time and date
sequences: Seconds → Minutes → Clock → 12/24 Time Format → Month → Number → Year → Seconds.
3. If you have chosen to correct a second (the image of the seconds flashes),
press the 'B button to reset the counter values \u200b\u200bin 00. If you
press the 'B button "when the meter is valid between 30 and 59, then
the meter value will be set to 00 and 1 will be added to the meter of minutes if
the value of the counter will be between 00 and 29, the change in the meter minutes
will not happen.
4. To change the values \u200b\u200bof minutes, etc., use the 'B button for
increase values.
greater speed.
The day of the week is installed automatically according to the date.
You can set the time value in the range from 2000. until 2099g.
five . To switch the 12/24 time presentation format, press the button.
'B ". With the selected 12-hour time representation format
the "P" indicator denotes the time value after noon.
6. At the end of the settings, press the 'D "button to return to mode
Current time.
7. If you do not press the buttons for some time, then the clock
automatically go to the current time mode.
Mode'T2.
In the 'T2 mode You can set another time (another time zone).
To go to 'T2 mode, click the' in "button in the current time mode.
Setting time set'T2.
1. Press the 'D "button in the current time mode. Image of seconds will begin
2. Press the 'C button to go from the discharge in the next
sequences: Minutes → Clock
3. To change the values \u200b\u200bof minutes, etc., use the 'B "button for
increase values.
Holding the buttons in the pressed state allows you to change the values \u200b\u200bwith
greater speed.
To exit the 'T2 mode, click the' B.
Illumination.
In any mode, press the 'A button to turn on the backlight.
The backlight of these clock is made on LEDs (LED), power
which falls after a certain period of use.
The backlight is difficult to see if straight sun rays fall on the clock.
Frequent use of backlight reduces the life of the battery.
Sound signal mode
Installation of alarm clock
one . Press and hold the 'D "button. Digital value in the discharge of the clock will begin
flash since it is selected for installation. At this moment alarm clock
automatically turns on.
2. Click the 'C button to go from the discharge to the discharge in the following
3. Press the 'B button to increase the selected value. Hold the button downstream allows you to change the readings in accelerated mode.
Checking the sound of alarm clock
In the audio signal mode, press the 'B button to check the sound.
Enable / disable audio signals
one . To turn it on / off, press the 'A button.
With the usual sound signal selected, the display appears
indicator - 'alm ",
With the selected indication of the beginning of an hour - the "SIG" indicator.
Second mode
The stopwatch mode allows you to register individual time segments, time
with an intermediate result and dual finish time.
The working range of total measured time is limited to 23 hours 59 minutes 59.99
seconds.
a) measurement of individual time segments
B (start) - b (stop) - b (re-start) - b (stop) - D (reset)
b) double finish
B (start) - D (separation. First finish. On the display the result of the 1st finish) - b
(Second finish) - D (Cancel separation. On the display the result of the 2nd Finish) -D (reset)
Countdown timer mode
Timer S. countdown time can be installed in
range from 1 minute to 24 hours.
When the countdown of time reaches zero, a long sound sounds
In the mode of the auto drive upon reaching zero sound signal, I.
counting time immediately starts again with earlier
set value.
Set timer modes
1. In the timer mode as an image on the display of the clock
start time Press and hold the 'D button. Picture
the values \u200b\u200bof the hour of start time will flash.
2. Press the 'C button to move from the discharge in the next
sequences: hours - minutes - watch.
3. To enter the start time values, use the 'B button.
If you want to enter a value of 24 hours as the reverse time
reference - set the value '00: 00 ".
4. To enable ('ON) / off (' OFF), press the 'D button.
5. At the end of the settings, press the 'D button.
Use timer
Press the 'B button in the timer mode to start the countdown time.
Press the 'B button again to stop the countdown time.
You can continue the countdown of time by pressing the 'B button.
After stopping the countdown of time, you can press the 'D "button for
to reset the countdown time in the starting value.
How to set up a G-Shock watch: Set the right time, synchronize the analog and digital indicators, start the alarm clock and use other functions
Setting time on the G-SHOCK clock and setting up other parameters
Setting time on the G-Shock clock and setting up other parameters.
Casio G-Shock is the legendary Japanese clocks intended for lovers of outdoor activities. Waterproof and shockproof housing, low weight and fairly compact dimensions, two time display formats, row useful featureswhich will be useful in any journey - these chronometers are designed to conquer new vertices. But first you need to know how to configure the G-Shock watch.
Setting time.
Using the "Mode" button, move by modes: Timer\u003e Stopwatch\u003e Alarms\u003e Clock\u003e Clock Setup\u003e Date. Each step in the transition is accompanied by a characteristic sound. You need the "Clock Setup" mode.
First you need to check whether the analog time coincides with the electronic indicators. If it does not match, hold down the "FORWARD" key and wait until the arrows get up to "00:00.
If there is an error using the "Reverse" and "Forward" buttons, set the arrows correctly. Short pressures allow you to move the arrows to one division, holding the keys - to move immediately to several divisions.
Click "Adjust" to synchronize analog and electronic time. Now you need to go to the installation of the exact time, taking into account the time zone.
Hold down the "Adjust" key until it starts blinking the indicator.
By pressing "Reverse", set the time zone. Look in the instructions, which abbreviation is more suitable for your region (for example, for Moscow is DXB.
Press "MODE" to go to Summer / Winter Time Select mode. Deactivate the function automatic switchingUsing the "Forward.
Click using the "Mode" button to select time display format. Install a 12-hour or 24-hour format. Switching between them is performed using the "Forward" key. Then go to the setting of seconds. They can be reset to the value "0" by pressing "Forward.
Setting minutes, hours and dates are proceeded in a similar way - the transition to the mode with the "MODE" key and setting a specific parameter with the "Forward.
The last thing you need to configure is the duration of the backlight. After that, press the "Adjust" key and wait until the arrows come into line with electronic time.
Other modes.
In the GA-100 model, four alarm clocks. Setting the time of the call on them as follows.
Using the "Mode" key, select the "Alarm mode.
Hold the "Reverse" button until it starts blinking the indicator.
Using "Mode" set the time.
Click "Reverse" to turn on the alarm clock. The same button takes place its subsequent shutdown.
Timer and stopwatch Settings do not require and run by the "Forward.
You can enable automatic backlight by holding the "Reverse" button.
When the clock slope is 40 degrees, it will work, illuminating the LED screen.
User's manual
First of all read this important information
Battery.
. At the first signs of nutritional failure (induction of the image or no backlight), it is necessary to replace the battery for the nearest dealer or distributor of Casio. In the hours you purchased, contain
The battery installed by the manufacturer for test tests is therefore the service life of this battery compared to the standard will probably be reduced
Protection against water.
. The clock is classified according to discharges (with i according to V discharge) in accordance with the degree of their protected water. Specify the discharge of your clock using the table below to determine the rules for their use.
Notes for relevant sections.
I. The clock is not protected from water. Avoid hitting any moisture.
III. If the clock was exposed to salty water, then rinse them thoroughly and swipe dry.
IV. If the clock was exposed to salty water, then rinse them thoroughly and swipe dry.
V. Watches can be used when diving with scuba (with the exception of such depths in which the helium-oxygen mixture is required).
ATTENTION!!!
For all categories of hours, it is prohibited:
. Press buttons under water
Care for your clock.
Replacing the rubber gasket that protects the clock from water and dust entering, should be carried out every 2-3 years.
. If moisture fall inside the clock, then immediately check them from the dealer nearest to you or the distributor of G-Shock.
. Do not expose hours to too high or low temperatures.
. Although the watch is designed to use them under normal conditions, however, you must avoid coarse treatment and prevent them from falling.
. Do not fasten the strap too tight. Between your wrist and strap should be a finger.
. To clean the clock and the strap, use a dry soft fabric, or a soft cloth moistened in an aqueous solution of a soft neutral detergent. Never use easily evaporating means (for example, such as gasoline, solvents, spraying cleaning products, etc.).
. When you do not use your clock, keep them in a dry place.
. Avoid getting on the clock of gasoline, cleaning solvents, aerosols from sprayers, adhesive substances, paints, and the like. Chemical reactions caused by these materials lead to damage to the gaskets, housing and polishing hours.
. A feature of some clock models is the presence of a silk screen image on their strap. Be careful when cleaning such straps so as not to spoil these drawings.
For watches with polymer straps ...
. You can detect a whitic powder substance on the strap. This substance is not harmful to your skin or clothes and can be easily removed by wiping with a soft cloth.
. Fitting on a polymer strap of sweat or moisture, as well as storing it in high humidity conditions can damage, break or cracking the strap. In order to provide a long service life of a polymer strap, as often wipe it from dirt and water with a soft cloth.
General description of modes of operation.
The figure shows a general view of the clock in the current time mode.
Press the "C" button to go from the discharge into the category in the following sequence:
Current Time Mode → Sound Signal Mode →
→ Security mode → countdown timer mode → Current time mode.
In any mode, press the "A" button to turn on
Display backlight.
Current time mode.
Setting time and date
2. Press the "C" button to go from the discharge into the category in the following sequence: seconds → minutes → Clock → 12/24 hour time format → Month → Number → Year → Seconds.
3. If you have chosen to correct a second (the image of the seconds flashes), press the "B" button to reset the counter values \u200b\u200bof seconds to 00. If you press the "B" button when the meter is valued between 30 and 59, the meter value is set at 00 and 1 will be added to the meter of minutes if the value of the counter will be between 00 and 29, the change in the meter will not happen.
4. To change the minutes of minutes, etc., use the "B" button to increase the values.
. The day of the week is installed automatically according to the date.
. You can set the time value in the range from 2000. until 2099g.
5. To switch the 12/24 time representation format, press the "B" button. With a 12-hour time representation format, the "P" indicator indicates the time of afternoon time.
6. At the end of the settings, press the "D" button to return to the current time mode.
7. If you do not press the buttons for some time, the clock will automatically go to the current time mode.
"T2" mode.
In "T2" mode, you can set another time (another time zone).
To go to "T2" mode, click the "B" button in the current time mode.
Setting time in "T2" mode.
1. Press the "D" button in the current time mode. The image of seconds will flash.
2. Press the "C" button to go from the discharge into a category in the following sequence: Minutes → Clock
3. To change the minutes of minutes, etc., use the "B" button to increase the values.
. Holding the buttons in the pressed state allows you to change the values \u200b\u200bwith a greater speed.
To exit the "T2" mode, click the "B" button.
Illumination.
In any mode, press the "A" button to turn on the backlight.
. The backlight of these clock is made on LEDs (LED), the power of which falls after a certain period of use.
. The backlight is difficult to see if straight sun rays fall on the clock.
. Frequent use of backlight reduces the life of the battery.
Sound signal mode
Installation of alarm clock
1. Press and hold the "D" button. The digital value in the discharge of the clock will flash, as it is selected for installation. At this point, the alarm clock automatically turns on.
2. Press the "C" button to move from the discharge into the category in the following sequence: hours - minutes - watch.
3. Press the "B" button to increase the selected value. Hold the button downstream allows you to change the readings in accelerated mode.
Checking the sound of alarm clock
In the audio signal mode, press the "B" button to check the signal sound.
Enable / disable audio signals
1. To turn it on / off, press the "A" button.
. With the usual sound signal selected, the indicator appears - "ALM" appears,
. When the start of the beginning of the hour is selected, the "SIG" indicator.
Second mode
The stopwatch mode allows you to register separate time segments, time with an intermediate result and double finish time.
The working range of total measured time is limited to 23 hours 59 minutes 59.99 seconds.
a) measurement of individual periods of time B (start) - b (stop) - b (re-start) - b (stop) - D (reset)
b) double finish
B (Start) - D (separation. First finish. On the display The result of the 1st finish) - B (second finish) - D (Cancel separation. On the display The result of the 2nd finish) - D (reset)
Countdown timer mode
The time countdown timer can be set in the range from 1 minute to 24 hours.
. When the countdown of time reaches zero, a long beep is sounded.
. In the auto drive mode, a beep sounds upon reaching zero, and the countdown of time will immediately begin again from the previously set value.
Set timer modes
1. In the timer mode, when you appear on the clock display, the start time value, press and hold the "D" button. The image of the value of the start time will flash.
2. Press the "C" button to transition from the discharge into the category in the following sequence: hours - minutes - the clock.
3. To enter start time values, use the "B" button.
. If you want to enter a value of 24 hours as the countdown time - set the value "00:00".
4. To enable ("ON") / off ("OFF") Press the "D" button.
5. At the end of the settings, click the "D" button.
Use timer
Press the "B" button in timer mode to start the countdown time.
. Press the "B" button again to stop the countdown of time.
. You can continue the countdown by clicking the "B" button.
. After stopping the countdown of time, you can press the "D" button for
To reset the countdown time in the starting value.
Casio G-Shock is the legendary Japanese clocks intended for lovers of outdoor activities. Waterproof and shockproof housing, low weight and fairly compact dimensions, two time display formats, a number of useful functions that will be useful in any journey - these chronometers are designed to conquer new vertices. But first you need to know how to configure the G-Shock watch.
Setting time
Using the "Mode" button, move along the modes: Timer → Stopwatch → Alarm clocks → Clock → Watch Setup → Date. Each step in the transition is accompanied by a characteristic sound. You need the "Clock Setup" mode.
First you need to check whether the analog time coincides with the electronic indicators. If it does not match, hold down the "Forward" key and wait until the arrows get up to "00:00".
If there is an error using the "Reverse" and "Forward" buttons, set the arrows correctly. Short pressures allow you to move the arrows to one division, holding the keys - to move immediately to several divisions.
Click "Adjust" to synchronize analog and electronic time. Now you need to go to the installation of the exact time, taking into account the time zone. 
- Hold down the "Adjust" key until it starts blinking the indicator.
- By pressing "Reverse", set the time zone. Look in the instructions, which abbreviation is more suitable for your region (for example, for Moscow is DXB).
- Press "MODE" to go to Summer / Winter Time Select mode. Deactivate the automatic switching function using the Forward key.
- Click using the "Mode" button to select time display format. Install a 12-hour or 24-hour format. Switching between them is performed using the "Forward" key.
Then go to the setting of seconds. They can be reset to the value "0" by pressing "Forward". - Setting up minutes, hours and dates are processed similarly - the transition to the mode with the "MODE" key and setting the specific parameter with the "Forward" button.
The last thing you need to configure is the duration of the backlight. After that, press the "Adjust" key and wait until the arrows come into line with electronic time.
Other modes
In the GA-100 model, four alarm clocks. Setting the time of the call on them as follows:
- Using the "Mode" key, select the "Alarm mode" mode.
- Hold the "Reverse" button until it starts blinking the indicator.
- Using "Mode" set the time.
- Click "Reverse" to turn on the alarm clock. The same button takes place its subsequent shutdown.
Timer and stopwatch Settings do not require and run by the "Forward" key.
You can enable automatic backlight by holding the "Reverse" button. When the clock slope is 40 degrees, it will work, illuminating the LED screen.
No similar articles.