Photos cannot be opened using. Enabling the Hidden Administrator Account under normal conditions

Often enough when installing windows updates (Especially strongly concerns versions of 8 and 10) users face an unpleasant problem - some standard or independently software installed It turns out it is impossible to open using the built-in account Administrator. The system issues a corresponding notice. To correct such an error, depending on the situation, there are several methods.

The application cannot be opened using the administrator account: Causes of Error

Consider the problem by taking the basis of Windows 10 as the basis, because it most often appears in this version of the system.

If the system displays a message that a program or some file cannot be opened using a built-in administrator account, the main reason is that a tenth modification, as well as the two previous (7 and 8), has originally registered, but Hidden registration of the admin, which is inactive by default, but the launch of some programs (in particular, system utilities or applications from standard Set Systems) have to be made on behalf of the administrator.

In most cases, the notification issued refers to viewing photos of the system to the system, to launch browser Edge., calculator, etc. To solve the problem, you need to refer to the accounts and make some changes in their settings.

The program cannot be opened using the built-in administrator account (10th version of Windows): the simplest solution to the problem

Most. simple decision Problems that are confirmed by numerous reviews of specialists is to change the level of control, which is installed in the default system.

To do this, you need to log in to the "Control Panel", which is quickly called by the Control command in the "Run" menu, and select the section in it there. You should select the control hyperlink and in the new window to enable UAC (put the slider on the second mark on the top or the highest). After pressing the "OK" button, the system is completely overloaded. Then the problem should disappear.

Additional actions with accounts

Another solution to the problem that the application is impossible to open, using the built-in administrator account, it may be to create a new "account" with the assignment of administrative rights (this is done from the same section of account management).

Now let's look at the situation when the user is the only user on a computer and the second "account" he does not need, that is, he himself has admin rights. In this embodiment, a special terminal command launched in command line (It is called through the Console "Perform" input of the combination of CMD). Here you need to register Net User Administrator / Active: Yes for Russian-language versions of Windows (if the version is in English, the Administrator should be used in the admin name. Next, you need to exit the current "account" and enter the administrated administrator.

If the user again receives a system message that some application cannot be opened using the administrator account, you can create new registration With admin rights, enter the system under it, run the command console with access at the admin level and use the previous command, but at the end instead of YES register No, which will deactivate the built-in "account" of the administrator.

Conclusion

Here, in principle, several typical situations and possible solutions By eliminating the problem. In the case when the login is not possible, you will have to run the troubleshooting process, as well as reset the administrator's password (disable the password request when entering the system).

In principle, if you understand, similar actions can be made, say, in the Group Policy section or use for this change in some keys system registry In the appropriate editor. However, such methods for an unprepared user may be too complex. That is why in this case they were not considered fundamentally, especially since the user in the same register may accidentally change completely not what is needed, and then the system will generally refuse to work. Moreover, in some cases, when the login is carried out using the local "account", access to the above tools can be blocked by the admin, and, no matter how trying, the corresponding editors will not work. Have to go to the administrator for a password (in the very simple case) Or require the installation of permissions and rights to change the system configuration.

So the methods described above are the most simple and access to the rights of the administant only when starting command Console., no more. And, as practice shows, such methods can apply any user, regardless of the level of knowledge, preparation and qualifications. As for preferences in the use of some method, it is very difficult to advise something. It all depends on the current situation. But in principle, you can work with the activation and deactivation of the "account" of the administrator, however, depending on any registration, the entrance is made, and whether there are still registered users in the system. Well, and then, as they say, the case of technology.

But, if you object to be objective, it is best to create a new registration and completely disable the built-in "account" of the admin. And easier, and more reliable. But everyone decides, which means of using the above to use in the end. All methods are good, but the lack of the very first solution is that it can cause unforeseen failures in the case of using a unlicensed copy of the system or OS, which is loaded from unreliable sources and in which there may be no some important components.

Good day!

The Windows 10 operating system has built-in protection designed to protect users from viruses and malicious programs. One of the manifestations of protection is the inability to start some programs from the user with local administrator rights. If you try to start one of standard applications Under the user with the rights of a local administrator, you will see this message:

It is impossible to bypass this protection, but you can use another account. How to do it, I will tell below.

How to get around the error "Unable to open the application":

1. Being working table WindowsClick the "Start" button, select "Parameters" in the menu.

2. In the Parameters window you need to select "Accounts":

3. Go to the "Family and Other Accounts" section and click the "Add user to this computer" button:

The parameters of this network saved on this computer do not match - what does this mean?

5. Use an account without administrator rights to work. If you need to do something with administrator rights - you can always log in to the administrator account.

When you work under the usual (not administrative) account, your computer will not suffer, even if you accidentally download or run the virus. All embedded programs will be excellent, errors "cannot open the application" will no longer appear.

Good luck to you! If you need clarifications -

Several times W. windows users 10 I got an interesting error "Unable to open using the built-in administrator account" when you try to start a browser Microsoft Edge., Skype or built-in store programs, photos, camera, calculator, etc. The only solution that the operating system offers is "Enter the other account and try again."

I think it is clear that it does not help at all. What to do and how to eliminate this problem? A number of sites on the Internet recommends to immediately reinstall Windows 10. On one forum I found some kind of incomprehensible registry tweak. And in the very fact, everything is quite simple. The reason for the appearance of the error is "not managed to open the application" - this is a disconnected control of accounting records uac. In many buildings, dozens found on torrents, this option is disabled by the author of the default assembly. As practice shows, this article should not be done and this article is a bright example!

So, to correct the error "Unable to open using the built-in administrator account" in EDGE or other program, we do the following. Right-click on the "Start" button and select the Punch Menu "Control Panel":

In the window that opens, you must open the "User Accounts"\u003e "Change account control settings":

Here you need to enable UAC, shifting the slider up from the lowest position. Most optimal option Settings are shown in the screenshot:

Press the "OK" button. After that, you need to completely restart your computer from Windows 10. The error "cannot open the application" no longer should appear.

If something remains unclear to you - watch the video instruction:

P.S.: Personally, I do not recommend installing the Windows builds, and I advise you to use only official images. The fact is that today make your installation image can even a schoolboy with the help of instructions on the Internet. But what he navigates there and how it will work in the future, it is absolutely unknown.

It is often enough when installing Windows updates (it is especially true of versions of 8 and 10) users face an unpleasant problem - some standard or independently installed programs are impossible to open using the built-in administrator account. The system issues a corresponding notice. To correct such an error, depending on the situation, there are several methods.

The application cannot be opened using the administrator account: Causes of Error

Consider the problem by taking the basis of Windows 10 as the basis, because it most often appears in this version of the system.

If the system displays a message that a program or some file cannot be opened using a built-in administrator account, the main reason is that a tenth modification, as well as the two previous (7 and 8), has originally registered, but Hidden registration of the admin, which is inactive by default, but the launch of some programs (in particular, system utilities or applications from the standard system set) is to be made on behalf of the administrator.

In most cases, the notification issued refers to viewing photos of the system by means of the system, to the launch of the edge browser, calculator, etc. To solve the problem, you need to refer to the accounts and make some changes in their settings.

The program cannot be opened using the built-in administrator account (10th version of Windows): the simplest solution to the problem

The problem is confirmed by numerous reviews of specialists, is the change in the level of control, which is installed in the default system.

To do this, you need to log in to the "Control Panel", which is quickly called by the Control command in the "Run" menu, and select the section in it there. You should select the control hyperlink and in the new window to enable UAC (put the slider on the second mark on the top or the highest). After pressing the "OK" button, the system is completely overloaded. Then the problem should disappear.

Additional actions with accounts

Another solution to the problem that the application is impossible to open, using the built-in administrator account, it may be to create a new "account" with the assignment of administrative rights (this is done from the same section of account management).

Now let's look at the situation when the user is the only user on a computer and the second "account" he does not need, that is, he himself has admin rights. In this embodiment, the solution to eliminate the resulting problem will be a special terminal command, started in the command line (it is called through the Console "Run" input of the CMD combination). Here you need to register Net User Administrator / Active: Yes for Russian-language versions of Windows (if the version is in English, the Administrator should be used in the admin name. Next, you need to exit the current "account" and enter the administrated administrator.

If the user again receives a system message that some application cannot be opened using the administrator account, you can create a new registration with admin rights, log in to the system under it, run the command console with access at the admin level and use the previous command, But at the end, instead of YES, register No, which will allow to deactivate the built-in "account" of the admin.

Conclusion

Here, in principle, several typical situations and possible solutions to eliminate the problem. In the case when the login is not possible, you will have to run the troubleshooting process, as well as reset the administrator's password (disable the password request when entering the system).

In principle, if you figure it out, similar actions can be made, say, in the Group Policy section or use for this change of some system registry keys in the corresponding editor. However, such methods for an unprepared user may be too complex. That is why in this case they were not considered fundamentally, especially since the user in the same register may accidentally change completely not what is needed, and then the system will generally refuse to work. Moreover, in some cases, when the login is carried out using the local "account", access to the above tools can be blocked by the admin, and, no matter how trying, the corresponding editors will not work. You have to access the administrator for password (in the) or require the installation of permissions and rights to change the system configuration.

So the above methods are the most simple and access to the rights of the administant only when the command console is launched, nothing more. And, as practice shows, such methods can apply any user, regardless of the level of knowledge, preparation and qualifications. As for preferences in the use of some method, it is very difficult to advise something. It all depends on the current situation. But in principle, you can work with the activation and deactivation of the "account" of the administrator, however, depending on any registration, the entrance is made, and whether there are still registered users in the system. Well, and then, as they say, the case of technology.

But, if you object to be objective, it is best to create a new registration and completely disable the built-in "account" of the admin. And easier, and more reliable. But everyone decides, which means of using the above to use in the end. All methods are good, but the lack of the very first solution is that it can cause unforeseen failures in the case of using a unlicensed copy of the system or OS, which is loaded from unreliable sources and in which there may be no some important components.

As in previous versions OS, in Windows 10 there is a hidden embedded administrator account, hidden and inactive by default. However, in some situations, it can be useful, for example, if any actions with a computer and the creation of a new user, to reset the password, and not only. Sometimes, on the contrary, you need to disable this account.

In this instruction, it is detailed how to activate the Hidden Account administrator Windows 10 in various situations. It will also be discussed how to disable the built-in administrator account.

I note that if you simply need a user with administrator rights, then the correct ways to create such a user are described in the material.

Enabling the Hidden Administrator Account under normal conditions

Under normal conditions, it is understood: you can go to Windows 10, and your current account also has admin rights to the computer. Under these conditions, the activation of the built-in account does not represent any problems.

To enter the activated account, you can either exit the system, or simply switch to the newly activated user - and the other is done by pressing the start - the icon of the current account on the right side of the menu. The login password is not required.

You can also exit the system through the right click on the start - "Completion of work or exit from the system" - "Exit".

On the inclusion of this Windows 10 account in "unusual" conditions - in the last part of the article.

How to disable the built-in account administrator Windows 10

In general, to disable the ancient administrator account in the same way that is described in the first part of the manual, run the command line, after which enter the same command, but with the key / Active: NO (those. ).

However, the situation commonly found - when such an account is the only one on the computer (perhaps, this feature of some non-license versions of Windows 10), and the reason for which the user wants to disable it - partially not working functions and messages like "it is impossible to open Using the built-in administrator account. Enter the other account and try again. "

Note: Before performing the following steps, if you long time worked under the integrated administrator, and you have important data on the desktop and in system folders Documents (images, video), transfer this data to separate folders on the disk (so it will be easier to place them in the "normal" folders, and not a built-in administrator).

In this situation right way solutions to problems and disable the built-in account windows administrator 10 will be the following:

1. Create a new account in one of the ways described in the article (opens in a new tab) and provide a new user administrator's right (described in the same instruction).
2. Exit the current built-in administrator account and go to the newly created - user, and not embedded.
3. Entering, run the command line on behalf of the administrator (use the start click menu) and enter the command net User Administrator / Active: NO And press ENTER.

At the same time, the built-in administrator account will be disabled, and you can use the usual account, also with required rights And without limiting functions.

How to enable the built-in administrator account when the input in Windows 10 is not possible

And last possible variant - The input in Windows 10 is not possible for one reason or another and you need to activate the administrator account in order to re-correct the situation.

In this context, there are two most common scripts, the first of which - you remember the password of your account, but for some reason in Windows 10, for some reason (for example, after entering the password, the computer freezes).

In this case, the possible way to solve the problem will be:

1. On the login screen, click the "Power" button on the right below, then holding the SHIFT, click Restart.
2. Windows Recovery Wednesday will be loaded. Go to "Troubleshooting" - "Advanced Parameters" - "Command Line".
3. You will need to enter an account password to start the command line. This time the input must work (if the password you remember is correct).
4. After that, use the first method from this article to enable a hidden account.
5. Close the command prompt and restart the computer (or click "Continue. Exit and using windows 10").

And the second scenario - when the password for logging in Windows 10 is unknown, or, in the opinion of the system, is incorrect, and the entry is impossible for this reason. Here you can use the instruction - in the first part of the instruction describes how in this situation, open the command line and make the necessary manipulations to reset the password, but in the same command line you can activate the built-in administrator (although it is optional to reset the password).

It seems that this is all that can come in handy on the specified topic. If some of the options have not been taken by me, or the instructions cannot be used - describe what is happening in the comments, I will try to answer.

After installing the Windows 10 operating system, you may encounter some problems and with the greatest probability, you will encounter exactly what you cannot open some of the built-in applications.

This can be a "Microsoft Edge" browser, built-in photo gallery, windows Store, Calculator and a number of other applications. When you start any of them, you will have the same message - you can not open the application.

The application cannot be opened using the built-in administrator account.
Enter the other account and try again.

In some cases, you may have an error in which it will be said that the activation of this application on behalf of the built-in administrator account is impossible.

How to be? What to do in such a situation and how to eliminate this problem?

Open applications in the "dozen"

In fact, in most cases, it is very easy to solve the problem.

1. Go to the control panel. This can be done by clicking the right mouse button on the Start button and selecting the appropriate line - the control panel.

2. In the Control Panel, click on the "User Accounts" link.

3. In this window, once again choose "".

4. On this page, you can make changes to your account and now we need to choose the item "".

5. Finally, in this window you need to change the settings for changing the parameters of the computer. There is a special regulator here - a peculiar scale. And there is a regulator that needs to raise to the very top that in the future you have the opportunity to open applications in Windows 10.

They pulled the slider to the top and press the "OK" button.

6. Restart the computer.

Everything, as you can see anything complicated. Nevertheless, if you have any questions, I recommend to watch a special video on this topic.

Video: What should I do if you do not manage to open the application in Windows 10?

13 days held a circular defense in sunken in a swamp tank two fighters! Cold day December 17, 1943 was fierce battles for the village of Demushkovo in the area of \u200b\u200bthe city of Nevel Pskov region. The 328th tank battalion was trying to repel it from the Nazis, which was part of the 118th separate tank brigade. Germans beat six of our tanks. And the seventh in the heat of the offensive landed into the slaughtered swamp meters in a hundred from the village. Trying to capture T-34, the fascists on that day have taken several attacks. The crew and the bastard remained near the tank courageously fought off the enemy, but the forces were unequal. Under the cover of the night, the car guns moved away, capturing a severely edged lieutenant Tkachenko. The mechanic-driver of priests died. The tank remained one 18-year-old Komsomolets Viktor Chernyshenko. Senior Sergeant Alexei Sokolov volunteered to help him voluntarily volunteered - a native of the village of Petrovogo Dressurian village council of Asecheevsky district. He was an experienced fighter - fought with Belofinnam on the Karelian Isthmus in 1939 - 1940, fought under Stalingrad, burned twice in the tank and was considered the best mechanic-driver part. "Thirtywell" firmly sat down in the quagger - it was not possible to free up. And the small garrison stallingly reflected one for other fierce attacks of fascists. Putting them into close distance, two tankers were painted enemy machine-gun fire, the benefit of the ammunition was a lot. The Germans took several attacks in the afternoon, tried to take possession of a steel fortress under the cover of the night. But Chernyshenko and Sokolov did not give up. Having lost hope to take the Soviet tank along with the crew, the Nazis became a direct set to beat on it from the guns. One of the shells struck armor and wounded guys. But they continued to reflect the attacks of the Germans. On the twelfth day, shells and cartridges ended. Bleeding, frostbed, hungry tankers held out of the last strength. Three grenades Victor threw in those who were close to the fascist tank. The surviving Germans fled. The last grenade tankers were postponed to extremely ... for the thirteenth day, on December 30, our troops hacked enemy defense with a powerful blow and mastered the village of Demushkovo. Going to the hollow, where our T-34 stuck, the fighters found many corpses of the Nazis. Carefully removed from the tank of two completely exhausted, frostbitated tank workers. One of them was unconscious, another muttered something, but also fell into infamous. Chernyshenko moved several operations. In the hospital, he who was in the bandages, attached to the gymnaster of the Order of Lenin and the Golden Star Hero. Save the senior sergeant Sokolov failed. He died on December 31, and not coming into consciousness. Hero title Soviet Union He was assigned posthumously. He was buried in the same place where he bravely fought. In the same place, local residents have established a monument that resembles a feat of tankers. And the Catcher's secondary school, located in seven kilometers from Demshikova, began to wear the name of the Hero of the Soviet Union Alexey Sokolov. The guy from Orenburg depths forever enrolled in the regiment, which consisted of service. On the eve of the holiday of Victory, May 6, in the Asecheevsky district, in the courtyard of the High School, which since February 2009, officially beamed by Alexey Sokolov, a rally was held dedicated to the opening of a memorial plank in memory of the countryman-hero. Major in the morning there were gathered for Dorsoshai teachers and schoolchildren who are right now called "Sokolites", as well as local residents, including those that have survived the war. Director of School Vasily Lebedev opened a celebration. The nephew of the hero Sergey Sokolov and the participant in the Great Patriotic War Gennady Glazunov, who once collected material about our heroic countrycam for a documentary story, removed the white cloth with a marble board installed at the entrance to the school.

One of the commemorative innovations in the modern Windows 10 was the appearance of a new browser - Microsoft EDGE. His predecessor - did not meet expectations assigned to him, and turned out to be rejected by most users who made a choice in favor of more advanced competitors. Microsoft Edge is called to correct the errors allowed in IE, differing stability, high speed and safety. Users this browser They may encounter dysfunction at which when trying to start the specified browser, the system issues the message "Unable to open using the administrator's entry. Enter the other account and try again. " In this material I will tell you that the Microsoft Edge error is unable to open using the built-in account, which is its causes, and how to fix it.

Error - Cannot Open Application

Usually, the message "Unable to open Using the built-in account" appears when you try to start Microsoft Edge from an administrator account, which in Windows 10 in its "horrors" rights differs from the administrator account in Windows 7.

The described dysfunction was found in Windows 8, where, from under the built-in administrator account, a number of modern applications were poorly launched. The specified problem is observed in Windows 10, where, in addition to Microsoft Edge, a number of other applications are poorly launched (view photo, store and so on).

The most common cause of this dysfunction is incorrect setting of the UAC component responsible for monitoring accounting records (this component is practically disabled). Some of the launched applications (in particular Microsoft EDGE) check the settings of this component to make sure that the required security level, and, with a minimum level of UAC, give me a "problem" message under consideration.

Also, the cause of dysfunction may be an unconfirmed user record, which will be necessary to confirm.

Microsoft Edge Unable to Open Using Built-in Account - How to Fix

Try to execute the following actions for correction. microsoft errors EDGE cannot be opened using the built-in account.

• Increase the level of uac. Click on the "Start" button, then "Control Panel", then select "User Accounts". Click there to "change account control settings" and move the slider in the extremely top (or before it) the value. Restart your computer;

• Check the confirmation of your account, if necessary, confirm it. To do this, click on the "Start" button, then "Parameters", then "Accounts" and, if necessary, confirm your account using a phone or email;
• Use another account (not administrator) to run Microsoft EDGE;
• Change the registry value (Or use the Local Security Policy Settings) Depending on the version of your Windows 10. To find out your version of Windows 10, click on the Win + R keys, enter the Winver key and click on "Enter".

If you have a Windows 10 HOME version:

Click on the Start button, enter the regedit in the search bar and press Enter. Follow the branch

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Policies \\ System

When you click on the last parameter of the SYSTEM branch, the panel with options opens on the right. Find the option there FilterAdministratertoken.. If it is not there - create it by clicking on an empty place right panel with the right mouse button, then select "Create" - the DWORD parameter (32 Bit) and give it the name "FilteradministratoToken" (without quotes).

Now double-click on this FilteradMinistrateToken parameter, set its value to "1", and click on "OK".

Now go on the branch:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Policies \\ System \\ UIPI \\

When you go to the last parameter of this branch (UIPI), click on the panel to the right by the "Default" option for its modification. Enter the value 0x00000001 (1) in this parameter, and then click on OK. Close the system registry window.

Now go to "User Accounts" as it is said in the first Council, click on "Change Account Control Settings", and install the UAC runner to the second value from above. Restart the system and try to start Microsoft Edge again, it often helps in a situation if Microsoft Edge does not start.

If you have another version of Windows 10 (not HOME):

Here to correct "Microsoft Edge cannot be opened using the built-in account" We will try to change the local security policy instead of changes in the registry settings. The local security policy is not available in Windows 10 HOME, therefore the method of changing the registry was used above.

Perform the following:

1. Press the Win + R keys;
2. In the row that appears, enter secpol.msc. and press Enter. The Local Security Policy will be taken;
3. In the left window, go to Security Settings\u003e Local Policies (Local Policies)\u003e Security Options;
4. On the right, find the "Account Control: Using the Approval Mode by the administrator for the built-in Administrator account" (User Account Control Admin Approval Mode for The Built-in Administrator Account) and double-click On it, open its properties. Select "Enabled" (Enabled) and click on "OK". Restart your computer.

Conclusion

If you are faced with the fact that it is impossible to open Microsoft Edge using the built-in administrator account, the most effective solution here will increase the value of the UAC parameter that is responsible for monitoring user accounts. If this board did not work, try changing the registry and group policy parameters as described slightly above - this method showed a good result from a variety of users of Windows 10.