home / Problems/ Chinese samsung s6 firmware. Installing official firmware on Samsung Galaxy S6

Chinese samsung s6 firmware. Installing official firmware on Samsung Galaxy S6

Instructions for installing the official single-file firmware on Samsung Galaxy S6 (SM-G920x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S6 and return the phone state ("Settings"> "About device"> "Properties"> "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air, it is enough follow the instructions provided.

Installation instructions

Download and install drivers for your phone.
ATTENTION!
If the program is already installed Samsung kies, you do not need to install the driver. You just need to completely unload Kies from memory, through the task manager, and then continue.

Disable the option " Activation lock"In the security settings of the device.

If the smartphone data has been encrypted, it must be decrypted.

Download and unpack the archive with the program to an arbitrary folder.
It is important that the path to the folder is not in Cyrillic. For example, "C: \ S6FW \".

Unpack the downloaded archive into the Odin PC folder for convenience. The file in the ".tar" or ".tar.md5" format must be kept and "SS_DL.dll" can be deleted.

Reset device data.
To do this, go to the settings on the tab “ Accounts "In the section" Archiving and reset", Select the item" Reset device"And press the button" Delete everything". The phone will restart.

Run Odin PC as administrator.

Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down, Home and Power keys. Then wait until the phone restarts and accept the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. Odin should light up the inscription “ COM».

Press the button " AP»And select the TAR-archive of the firmware.

Items " Auto reboot" and " F.Reset Time" must be activated, a " Re-Partition", If active - must be disabled.

Press the button " Start". The process of installing the firmware will begin.

At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0) ". The phone must be rebooted manually by holding down the power button until the screen turns off. The device may take up to 5 minutes to boot up for the first time.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select the item " Wipe data / Factory reset", then - " Reboot system now". If after these steps the device also freezes at startup, you need to reflash it again.

Samsung Galaxy S6 SM-G920F is a branded smartphone running on Android 5.0. Here you will find out the characteristics, how to root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.

Root on Samsung Galaxy S6 SM-G920F 32Gb

How to get the root for Samsung Galaxy S6 SM-G920F 32Gb see instructions below.

If the applications did not help, ask in the topic or use complete list root utilities from the topic header.

Specifications

Type: Smartphone
Operating system: Android 5.0
Case type: classic
Body material: aluminum and glass
Control: mechanical / touch buttons
SIM type: nano SIM
Number of SIM-cards: 1
Weight: 138g
Dimensions (WxHxT): 70.5x143.4x6.8 mm
Screen type: color Super AMOLED, 16.78 million colors, touch
Touchscreen type: multitouch, capacitive
Diagonal: 5.1 inches.
Image size: 1440x2560
Pixels Per Inch (PPI): 576
Automatic screen rotation: yes
Scratch-resistant glass: yes
Ringtone type: polyphonic, MP3 ringtones
Vibration alert: yes
Camera: 16 million pixels, LED flash
Camera functions: autofocus
Recognition: faces
Video recording: yes
Max. video resolution: 3840x2160
Max. video frame rate: 30 frames / s
Geo Tagging: yes
Front camera: yes, 5 million pixels.
Video Playback: MP4, M4V, 3GP, 3G2, WMV, ASF, AVI, FLV, MKV, WEBM, VP9
Audio: MP3, AAC, WAV, WMA
Dictaphone: yes
Standard: GSM 900/1800/1900, 3G, LTE
Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA +
Interfaces: Wi-Fi 802.11ac, Wi-Fi Direct, Bluetooth 4.1, IRDA, USB, ANT +, NFC
USB charging: yes
USB-host: yes
Satellite navigation: GPS / GLONASS
A-GPS system: yes
Protocol support: POP / SMTP, IMAP4, HTML
Use as USB storage: yes
CPU: Samsung Exynos 7420
The number of processor cores: 8
Video processor: Mali-T760 MP8
Built-in memory: 32 GB
Volume random access memory: 3 GB
Memory card slot: none
Additional SMS functions: text input with dictionary
MMS: yes
Battery type: Li-Ion
Battery capacity: 2550mAh
Battery: Non-removable
Function wireless charging: there is
A2DP profile: yes
Sensors: light, proximity, gyroscope, compass, barometer, fingerprint reading
Book search: yes
Exchange between SIM-card and internal memory: there is
Organizer: alarm clock, calculator, task planner
Features: processor - 4 cores 2.1GHz + 4 cores 1.5Ghz
Date a

Firmware for Samsung Galaxy S6 SM-G920F 32Gb

If a custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will promptly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. This page will also show firmwares for Samsung Galaxy S6 SM-G920F 32Gb. Please note that for this Samsung model, an individual ROM file is required, so you should not try firmware files from other devices.

What custom firmwares are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Samsung Smartphone Problems and Disadvantages and How to Fix Them?

If Galaxy S6 SM-G920F won't turn on, for example, see White screen, hangs on the splash screen or the notification indicator only blinks (possibly after charging).
If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
Doesn't charge (usually iron problems)
Doesn't see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for Samsung Galaxy S6 SM-G920F 32Gb

You can do it in a very simple way:

Settings-> Recovery and reset
Reset settings (at the very bottom)

How to reset your pattern

How to reset pattern key if you forgot it and now you cannot unlock your Samsung smartphone... On the Galaxy S6 SM-G920F 32Gb model, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Hello dear readers. Sometimes, in pursuit of trends, we purchase non-original fashionable gadgets and gadgets. Everyone wants to keep up with the times, well, what to do when desires do not coincide with opportunities.

That's right, you can buy a copy of the original for a much smaller amount. In addition, modern Korean and Chinese copy The Samsung Galaxy S6 g920f is so well made that your friends may not even notice the difference.

In this article, we will analyze in detail how it is done Galaxy firmware S6 SM-G920F. You will find out why it is carried out, how to prepare your smartphone for it, how long the entire operation will take and undoubtedly specific instructions for its implementation.

Why are we flashing the Chinese Galaxy S6 g920f

On the face copy of Galaxy S6

For a user who comes across a term such as firmware for the first time. It seems to be a kind of complex process, which is necessarily done in service center, or experienced smartphone users.

In fact, things are much simpler. Firmware is the installation process software on the phone. If we draw an analogy with a computer, it reinstalls Windows in the same way. And this process, as everyone knows, is within the power of any student. Have original smartphone the android platform is responsible for the software, we will have the right to choose.

Thus, we need the Galaxy S6 g920f firmware to install software on the phone, which will implement its manageability and further functionality that is comfortable for us.

Preparing for firmware

For the firmware to be successful, first we need to prepare resources for a full-fledged work front.

First we download from the official server Samsung program Odin.

We also need to download drivers to link the computer with the phone. Simply put, so that the computer recognizes and sees our smartphone.

Then you need to download the firmware that we prefer, for example G920FXXU4AOCV_6.0_marshmallow.

How long does the firmware take

In hand experienced user, the firmware takes about 5 minutes. By the way, it is worth noting that this process directly depends on the power of the processor of the computer on which it is carried out. A beginner will complete this task in half an hour, after which the smartphone will automatically reboot.

If you are having trouble or problems, try reinstalling the drivers. Or replace the usb wire and connector.

Software download process

Dachshunds, for a start we will unzip the program for the firmware and the firmware itself on the desktop. Well, everything seems to be ready, you can start.

We launch the Odin program.

Now we need to arrange the files in order in the appropriate fields: BL in BL, AP in AP, CP in CP, and CSC in CSC.

Then we transfer the smartphone to the firmware mode.

Now we connect our Korean or Chinese Galaxy S6 g920f to the computer, and watch how the program connects with it, the ID: Com inscription should light up.

Now we press the start button, and we drove off. The firmware starts to load.

If your firmware Samsung copies Galaxy S6 SM-G920F went like clockwork, put the pluses in the comments. If you have any difficulties, feel free to write angry comments, we will be happy to help you.

Regardless of which smartphone you choose - Galaxy S6 or Galaxy S6 Edge, in any case, you get the same TouchWiz interface, which is slightly simpler and lighter this time. However, this does not mean that you should not pay attention to custom firmware. In contrast, third-party Android builds tend to offer better performance and better battery life. And let's be honest, the Galaxy S6 and Galaxy S6 Edge just lack a bigger battery. Enough time has now passed for the developers to release stable builds for the Galaxy S6 and Galaxy S6 Edge.

Unfortunately, there are still some problems. This is due to the fact that Samsung used its own new Exynos processor in the new flagships, and for custom firmware this is problematic. On the other hand, there are still craftsmen who are not stopped by this and you are offered several firmware options indicating the model numbers of smartphones on which you can install the assembly.

As always, you should think twice before installing third-party firmware on your smartphone. Always follow the instructions and be careful, because in the future you will have to address all claims only to yourself.

XtreStoLite Deodexed Mod Edition 1.2

Available for SM-G920F / SM-G920I / SM-G920T

The firmware is quite small (467 MB) and represents a fairly lightweight version of the firmware with TouchWiz for the Galaxy S6. XtreStoLite offers all the most requested TouchWiz features. The assembly is assembled from the stock G920I DVU1AOE3 Lollipop 5.0.2, but the stock "weighs" almost 1.5 GB and does not have all those features and settings, mod support that is in XtreStoLite. There are 5 options in the reboot menu at once, the new SuperSU and Busybox, built into the firmware, the absence of Knox, phone call recording, numerous interface settings and many other improvements. Moreover, some problems of stock firmware are solved here - the system memory will not overflow and applications will not be forcibly closed.

This firmware has a lot of new features on top of the stock TouchWiz. For example, the assembly received new firmware modem (XXU1AOE3), supports Edge Contacts (which is in the Galaxy S6 Edge), allows you to change the status bar, adjust the backlight duration, easily switch between user accounts, there are many new settings for the stock launcher, the network speed is indicated in the status bar and much more. This build isn't that small compared to the others, but it's worth getting noticed.

AllianceROM

Available for SM-G920F

AllianceROM has several different themes for user interface, but each user himself can completely customize the interface and change the system settings in accordance with his requirements. Quite an impressive list additional opportunities some of them are really unique, which you won't see in other custom firmwares. I will not list them all for brevity, but the most important ones deserve mention - AllianceROM for Galaxy S6 initially gives root rights, the firmware is deodexed with the latest Busybox, init.d, Sqlite scripts are preinstalled, all the stock features of TouchWiz remain, Aroma installer for choosing settings the firmware you want to install.

WanamLite has a solid list of features, making it an attractive option for those looking for a stock, but with improved features. First of all, the firmware has a stock kernel, which has been improved, there is root-rights and Busybox support. If you are a fan of extra functionality, including phone call recording, improved camera app and other user interface improvements, then test WanamLite.

CarHD ROM v.1

Available for SM-G925F

Although the developers of this firmware release assemblies for other models as well, the CarHD ROM for the Galaxy S6 Edge is a real shortage - the interface here is translucent, although some may not like it. The assembly was created on the basis of the latest official firmware (XXU1AODG) and has all the usual attributes of custom firmware - root-rights, latest version SuperSU, BusyBox. The firmware is suitable for those Galaxy S6 Edge users who don't like stock firmware.

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of different functions... Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything you can do. modern smartphones... Sometimes we just forget that they are not eternal and are subject to gradual wear and tear.

Operating room smartphones Android systems long ago filled the whole world with their diversity. Their program code open and ready to edit or improve. In the process of using such devices, there are times when the software component fails and the smartphone stops working properly. To fix the problem, a simple factory reset may not be enough - you need to flash your Samsung Galaxy S6 Edge SM-G925F.

Fortunately, manufacturers of mobile equipment and just enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life by starting its daily work with new forces. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S6 Edge SM-G925F.

What do we need?

A device charged at least 50% (if possible).
Original USB cable.
latest version.
Latest firmware:

If a new version of the OS was released for the smartphone or the one you need is not in the instructions, let us know in the comments under the post.

Samsung Galaxy Core Prime SM-G360H Firmware Process

If Kies was installed on the computer, remove it.
Download and install for Samsung smartphones and tablets.
Download and install.
We reboot the computer.
Unpack Odin to your desktop. We extract the firmware files from the previously downloaded archive into the same folder.

On the smartphone, go to “ Settings«, « For developers"(If there is no such item, go to" About the phone"And click many times on" Build number"), Include" USB debugging" and "Unlock. foresee a production ".

We transfer the smartphone to Download Mode... To do this, turn it off completely, simultaneously hold down the buttons Home + Power on + Volume down.
After the appearance of the screen with the inscription Warning, confirm the selection by pressing the button Volume up.

The phone went into download mode.

Launch Odin as administrator.
In this state, we connect the device to the computer using a USB cable (exclusively USB 2.0) in order to flash Samsung Galaxy S6 Edge SM-G925F... If in the ODIN window the field ID: COM turned blue, as in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that can be in the archive with the firmware and indicate where to insert them in the Odin window.

If there is only one file and takes up a lot of space - insert it into the field PDA... This is the firmware.

In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto reboot and F. Reset Time.

This is how the program window looks like, ready for firmware:

Click on START and we are waiting for the end of the firmware process. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch USB cable... The whole procedure will take a few minutes - the exact time depends on the power of the PC.

After the end, the device will reboot itself. We disconnect it from the PC and start using the fresh firmware.