the main / Programs / How to rotate one page in the Word horizontally. How to flip the page in Word horizontally (landscape orientation)

How to turn one page in the Word horizontally. How to flip the page in Word horizontally (landscape orientation)

By default, in the Microsoft Word program, all sheets have a book orientation, that is, they are located vertically, but sometimes there is a need to turn them over, so that they acquire the album. In this article we will talk about how to make a landscape sheet in the "Word" of the 2007 issue. It will be described how to do these manipulations with all the sheets at the same time and with each separately.

Turn over the sheets of the whole document

Before the story about that, horizontally, it is worth saying that the instruction will be common to all versions of the program, and the 2007 WORD will act as an example. In some versions, the location of some interface elements, their display and name, however, the principle is common to all.

So now you will learn how to turn the sheets horizontally in the "Word". Please note that after executing this instruction, all sheets in the document will turn over. If you need to turn over only one or more, then go directly to the next way.

To turn all sheets in the "Word", you need:

IN open Document Programs move to the "Page Markup" tab (in later versions, this tab is referred to as "layout").
Press the "Orientation" button.
In the drop-down list, select the desired orientation: in this case, the landscape.

As you can see, after completing all the requirements in your document, all pages will change the orientation to the landscape. To return everything as it was, you need to do all points anew, only in the last to choose the orientation of the "book".

Turn over one sheet in the document

You already know how in the "Word" to turn the sheets horizontally, but sometimes it is necessary to change the orientation of one or more sheets. In this case, the previous method is no longer suitable, but you can use what will be demonstrated now.

So, to change the location of some pages in the "Word", follow the following instructions:

To begin with, you need to highlight the part of the text you want to move to a sheet with landscape orientation. However, pay attention to the fact that after its movements, the text will be on a separate page. If you have so conceived, then continue.
Go to the page "Page Markup" ("Layout").
Click on the "Field" icon, in the "Page Parameters" toolbar.
The list that appears, select "Customizable Fields", located at the bottom.
In the window that appears, change the leaf orientation, this option is located in the "Orientation" area.
In the "Apply" drop-down list, located at the bottom of the window, select the string "to the dedicated text".
Click on "OK".

After performing this rather extensive instruction, the selected text to move to new sheets with landscape orientation.

Conclusion

Now you know how in the "Word" to turn the sheet horizontally. As you can see, both instructions are quite simple in use and do not require deep knowledge. And following the applied instructions, the landscape sheet in the "Word" will be done at any user.

This question interests, perhaps, every second user of the Word text editor. After all, sometimes to change the position of the page - the measure is forced. For example, it is required when it is impossible to place some object on a vertical sheet on the sheet: be it a scheme, table, graph or pattern. In our article, we will look at several ways to turn the sheet in the Word.

By default, in the Word text editor, all pages are located in vertical orientation. Also, the functions of the program allow them to be placed horizontally. Make it under the power even a novice user - how, we will tell now. Methods that we will tell, allow you to turn the sheet as from the horizontal position to the vertical and vice versa.

It is worth noting that often users of the WORD program do not change the orientation of the sheets on the computer, and do it when printing a document. Currently, almost all printers allow you to change the orientation of sheets in the process of printing documents. True, in this case, all sheets will be turned, and the quality and type of document will suffer.

How to turn the sheet in Word: Word version 2003 and earlier

To make the horizontal or vertical orientation of the sheet in the Word of 2003, 1997 and 2000, the user will have to complete the following algorithm. First, first you need to go to the "File" tab, which is posted on the toolbar, you need to select "Parameters". Then in the "Fields" section, in the line called "Orientation", the user will be asked for two options for pages orientation: books and landscape. If you need to make a horizontal orientation of the sheet - choose the landscape, if the vertical is the book. After click OK.

Is it possible to turn over only one sheet in the document?

If the user needs to be flipped into a vertical or horizontal position only one sheet in the entire document, the following steps should be performed:

To begin with, you need to highlight the part of the text you want to change the orientation.
After moving to the "Parameters".
Next, you need to select the horizontal or vertical orientation you need.
In the tab called "Apply", choose the option "to the dedicated text".
After confirm all the actions by pressing the OK button.

How to flip a sheet in Word? Option for 2007 and newer

If you prefer to use the 2007 Word text editor and a newer modification, then this section is for you. In it we will tell you several options, how can the sheet roll over, making a landscape or book orientation in the entire document or its separate part.

The first thing that is required by the user is to go to the tab called "Page Markup". After entering the "Orientation" section. As we mentioned above, by default, the text editor sets a book orientation. If we need a book, then choose the option you need. After click OK. Pages will automatically turn over.

If you need to turn over only one page from the entire document, the method completely copies the one described for the Word 2003. Initially, the part of the document must be turned over. After you need to go to the "Parameters" item and select the desired type of orientation. In the tab called "Apply", choose the option "to the dedicated text". After confirm all the actions by pressing the OK button. The differences in the methods described are only in the other location of the settings button on the tab with all parameters.

Summing up, I would like to note that in practice it is usually a book orientation of pages is used to compile reports, letters, writing scientific works, etc. Laying orientation is more suitable for creating tables or location schemes. Usually, the horizontal page is used in scientific works written by students of technical universities due to the fact that there is a large number of tables and calculations in the text.

In our article, we looked at several ways to turn the sheet in Word. As you already understood, there is nothing complicated. The main thing is to carefully and clearly act the indicated algorithm of action. In this case, the result will please you, and the process itself will not deliver any difficulties and troubles.

Microsoft Word. It seems one of the most popular text editorswhich, thanks to his versatility, received widespread distribution. By default, it uses a "Book Page" orientation method, and not album orientation, which is not always convenient. In a number of situations, users are interested in how to turn the sheet in the Word horizontally.

After all, quite often, it is required to make a landscape sheet in the Word, as the format of the document implies precisely horizontal positioning of the sheet. It is also called landscape orientation. Since the need for Word make the landscape page seems to be one of the most sought-after functions, we will look at how to turn the sheet in the Word different versions Programs Read more.

How to flip a sheet in Word 2016

First of all, it is worth noting that the user has the opportunity to turn 1 sheet in Word and perform this procedure for all pages of the document. The second option is much simpler, as literally for a couple of pressing mouse, while making a single album sheet is somewhat more complicated.

In order to turn all sheets in Word, you should follow the next action algorithm:

Find the page markup category in the top of the window in which the parameters you need are located;
Click on the orientation point, which will open for the user at once two versions of the sheet positioning;
Change standard orientation to landscape, which will allow you to change the position of all sheets in the document.

IMPORTANT! Such manipulations are extremely simple, but do not allow one page album. Therefore, we recommend adhere to a more complex, but functional algorithm in cases where the user needs to change the orientation of only one sheet.

A similar method is somewhat more complicated and implies an arrangement of the boundaries (breaks) of the section, in view of which he takes a few more time. To make one landscape page in Microsoft Word, you must:

Open the Home tab and select a category with a icon resembling an inverted P;
Since only one sheet is required to flip, it is necessary to place the gaps at the beginning and at the end of the page. You can do this by using the page markup tool by choosing the category of breaks and clicking on the item next page;
After both borders of the sheet were set, it will be necessary to perform a procedure similar to that when it was necessary to turn all sheets in Word document.

This operation allows it quite successfully in the Word to make a sheet horizontally, changing the orientation of the sheet and, as a result - the finished landscape page. If this failed to do this, it was most likely a mistake was made when delimiting the page.

How to turn the page in the Word 2010

If you want to flip the sheet in Word 2010 or all document pages, you will have to adhere to the procedure for the actions described by us above. The fact is that this feature It did not undergo major changes and starting with the version 2007 and higher, to turn the page in Word horizontally, it will be necessary to perform the same actions. As a rule, the difference lies only in appearance Panels and details of design, while the algorithm itself remains unchanged.

This release is generally border, since the horizontal position of the page here is also replaced as in later versions of this office package.

How to turn the page in Word 2007

As we wrote earlier, turn one sheet in Word 2007 possible using standard methodBut to change the entire document, you will need to perform a number of other manipulations. First of all, you need to find the page parameters and click the arrows on the upper part.

After that, you need to open the fields tab and select the page orientation at the bottom window. By default, the user has a book orientation that will be needed to change to the landscape to achieve the desired result. Horizontal orientation changes to the books similarly, which allows experimenting with various orientation styles. Thus, deploy a page in Word horizontally will not be difficult.

How to flip a sheet in Word 2003

This Release Word is presented, perhaps, one of the oldest and rarely used by users. However, we will look at how to make the vertical position of the page.

Tip! If you need to change the entire document, it is enough to use the instruction for the 2007 Office.

However, if the user needs to turn one sheet in the Word 2003 horizontally, it will be necessary to select the desired part of the text, after which, go to the orientation menu, change to the landscape and apply changes to the selected text. Thus, to make a landscape page in Word 2003 is not difficult. A similar method is used in earlier versions, which allows you to turn the sheet in Word horizontally, even in the absence of program updates over the years.

Video to help

I continue to describe the working moments associated with the Word, because of which I had to climb if not in search engines, then ask colleagues exactly. Well, or these questions caused me to be blown, stopper in the working process.

This time it will discuss how to turn the page in the Word. Personally, I need to turn the pages "horizontally vertically" appears when reporting reports. Since the results of measurements and testing except tabular data are various graphs, diagrams, and the same tables, but with a huge number of columns that are more convenient to display on the inverted sheet.

As usual, I will describe the situation with a WWD 2003, and a few words about the features known to me in version 2007.

So the orientation of the sheet in the Word has two meanings - books and landscape.

The menu itself, with which you can turn over the sheet is at the following address:

In the Word 2003 - file \u003d\u003e Page Parameters \u003d\u003e Orientation \u003d\u003e Ladder or Book
In Word 2007 - top Menu \u003d\u003e Page Marking \u003d\u003e Orientation \u003d\u003e Book or Ladder

With this, everything seems to be understandable. The only difficulties arise when you have a report consisting of many pages and a page whose orientation should be changed to the landscape is between two pages with a book orientation. There are already a feature that should be talked in more detail.

There are such concepts as a page breaking and separation of the section. It is in these concepts, or rather in one of them, and lies a response to the question of turning one page from the contract of coming. To rotate only one or more pages, it is necessary that these pages are completed by the "section breaking", and the page to our pages has also ended with the "separation of the section".

The break menu is located in the following places:

A pair of outlets about the rupture menu:

Video about changing the page orientation through a page break in Word 2003, 2007

Similarly, instead of insertion through the section breaks menu, you can use menu Word. 2003 - Top Menu \u003d\u003e File \u003d\u003e Page Parameters \u003d\u003e Select the type of orientation \u003d\u003e Next in the same window \u003d\u003e Sample \u003d\u003e Apply \u003d\u003e until the end of the document.

As a result, the orientation of the subsequent pages for the one on which the mouse pointer is installed will change. Next, you can choose the next page running in a row with a changed orientation and again to do this procedure - it turns out that it will be alone to have album orientation. It seems like the second method is obtained - as we do through other menu items, but if you show the hidden symbols of "non-printable signs" - then it becomes clear that we again dealt with the separation of the section from the next page.

Video about turning a page through the Page Parameters in Word 2003, 2007

Another option, for those who do not want to bother, may be an option when the pages that need to be turned over are at the end of the report, such as the application to the protocol or report. In this case, they can be created in separate files, where the required orientation is simply created immediately. In some cases, it is more convenient, for example, if the Symbols of the division section take place in the last line and because of them, the rupture is transferred to the next page, which creates an unnecessary unit of the report \u003d) and the numbering is the passage, then the location will help separate page in separate file. But as a result, the choice remains for each.

We make the entire page horizontal

We carry out the following actions:

Go to the tab "Page Markup" And we see here the "Orientation" button. According to the standard there is a book orientation.
Click on landscape orientationAnd all our sheets turn into a horizontal position.

This manual works in Word 2007 and above.

We make just one page horizontal

As you can see, to make the whole document horizontal turned out to be easier than simple, but there are cases when the book, and landscape orientation is required in terms of document. Usually it has to use when a person writes all sorts of manuals, books, etc.

In order to make one or more pages horizontal, we will need:

Again go to the section "Page Markup".
Go here and look at the right upper corner. There must be a button "Page Settings". Click on it, and you are opening an additional menu that offers you to choose the type of writing - vertical (book) or horizontal (album). Immediately you can choose what to apply - to all of the document, or before its end.
Choose an item to the end of the document, and we have one album sheet in the Word.

If you finish work on the album sheet, and the next leaf you will need a book - just do the same work, just install the "book" option in the settings, and not album. That's all. This manual is exactly working in the Word version 2007, but for sure and for older versions of the program.