How to improve the performance of three-dimensional graphics and games. Increase Windows Aero Desktop Productivity

If the computer slows down, there are problems using programs or video viewing - it makes sense to check the performance of the computer. The performance index is used by the Windows 7 operating system for visual and understandable assessment of your own work. Than it is higher - the faster and more powerful the computer, especially sophisticated programs And the games it will pull.

What is the performance index

"Index windows performance"(Windows Experience Index, Wei) - service operating system Windows that allows you to carry out a computer performance test.

How to learn productivity index

To find out the performance index, there are several ways. Consider the two most simple.

Through "My Computer"

Through the "Start" menu

As you can see, both ways are simple enough and do not take much time.

Which categories are presented in the table

The "Productivity Index" table includes five components:

What are the numbers mean

WEI computer is determined by the smallest rating. The maximum value of points in Windows 7-7.9, minimum - 1.0. Consider the indicators of the "performance index" on the example of graphics evaluation.

Table: Publicity Index scores and computer functions that match them

Methods for improving computer performance

For modern desktop computer The normal performance index starts from 5.0. Please note that graphics devices need to install fresh drivers, otherwise the indicators can be understated.

Most often, WEI will be equal to 5.9 when using HDD ( hard disk), even if the estimates of other categories are much higher. This is explained by the low rate of appeal to the main hard disk. When replacing hDD disk on the solid State SSD Evaluation of the hard disk is rising to 7.9 and becomes the highest in the category table. The use of solid-state disks improves significantly windows work generally.

Low graphs may be the result of the absence of graphic drivers or insufficient graphics card performance. For correction software problems You should download drivers from the official website of the manufacturer who has released graphic equipment On your computer. If the drivers are installed correctly, improve the performance index will help replacing the video card to more powerful.

Additionally, computer performance can be increased by the following actions:

Video: How to increase computer performance

What to do if the performance estimate does not work

It happens that the procedure for calculating the performance index ends with an error. This error can be caused by both software and hardware problems.

Software problems:

• availability in the system of viruses, trojans, malicious programs;
• disk errors;
• errors of paths or registry.

Refusal or hardware problems incorrect work One of the elements.

Software errors are solved as follows:

• verification of a computer with antivirus (MalwareBytes), as well as other antivirus utilities;
• check hard disk for errors;
• scanning system for damaged components. For this discover command line On behalf of the administrator and enter the SFC / SCANNOW command, press ENTER. The system will automatically check and whenever possible will be corrected damaged system files;
• install K-Lite Kodeck Pack;
• restoring the system, if anything helped (refund of the computer to an earlier state - when everything worked, - with the help point).

If you suspect problems with iron, AIDA is needed to check the temperature of the sensors - eliminate overheating. Checking contacts, checking RAM memory for errors (for example, MemTest86 program), the video card stress test will help identify or eliminate the problems in the work of any component. If you are not sure that you should cope, it is advisable to contact a specialist, since the wrong tests can lead to a breakdown of the computer.

Often an error calls a computer power supply. Since when calculating the performance index, all items work under the maximum load, it may not be enough power. If this is a laptop - check the power settings, there must be "maximum performance", and it itself should be connected to the network at this time. If problems are eliminated in the components, it may be time to replace the power supply to more powerful. Even the working unit of the power supply after a year of continuous use loses the power, which is why equipment failures arise and " blue screen of death".

The "Windows performance index" (WEI) folds from several factors: processor power, speed random access memory, performance 2D and 3D graphics and data exchange rates with a hard disk. The overall assessment is determined by the smallest indicator. To enhance Wei, there are several ways, among which is to replacing the video card or hard disk, and cleaning, check for errors, etc. If the performance estimate does not work, then you should check the computer to viruses or find errors in the registry. Also, the cause of problems can be problems with the video card or computer power supply.

To do this, we do such steps:

• At the free place of desktop, press the right mouse button;
• From the menu that appears, select "graphic characteristics ...";
• We put the mark opposite the "Advanced Mode" field and click "OK";
• Open the "Three-dimensional graphics" tab;
• And on the right side of the window, in the settings of three-dimensional graphics, we move the slider until the "Performance" stops;
• Bully below, we put a tick opposite the "Optimal Application Mode" record;
• Finally, click "Apply" and "OK".

3. Disable or delete programs that require many resources.

Some programs begin their work while the system is loaded, the user sometimes does not even suspect this. It is necessary to disable the autoload of such programs, this will significantly increase the performance of the system. Also, a lot of resources are required for antiviruses, utilities for downloading files from the Internet, programs used for communication (Skype, a variety of clients). These all programs, if possible, are also disconnected during the game, to increase speed.

Well, and it should not be noted that there are many programs that are designed by specialists specifically for overclocking video cards. The main thing is to pick up optimal optionwhich will really increase productivity, and will not lead to unstable operation of the system and reduce its speed.

And one more important factor setting the game, make sure your laptop matches system requirements This game. Since, forced it to work faster than he does, it will not be able to normal userNor an advanced specialist in this matter.

How to increase graphics performance for games?

Master's answer:

An increase in the performance of the video card is possible using two methods. If there is no desire to change the characteristics of the video adapter, you can change the parameters of its operation. To do this, you need to configure properly software.

Install last version softwarewhich is suitable for our video card. It can be found on the sites www.ati.com and www.nvidia.ru. Website choose depending on the video adapter brand. Download the desired version of the program and install it. Reboot your computer to complete the installation of the components.

Open the screen properties and select "Optional". Activate the "NVIDIA control panel" or " Catalyst Control Center. The menu will open, you need to select "Configuring 3D applications" or 3D settings.

The "Smoothing" item must correspond to the "Level (2x) parameter". For the filter optimally use Box. Turn off anisotropic filtering. Activate "Use Application Settings" or "Pixel Samples".

Next, in the "Level of detail" level of multiple images "set" High Performance ". If the quality of graphics in the game is low, then you will increase this significantly to the value of "performance" or "quality".

It is necessary to find the item "Wait for vertical update" or "Vertical Synchroemuls". Install the "Always Disable" checkbox for it. This is seriously increased by the number of reproducible frames / sec in many 3D games.

Choose right mode smoothing. If you need to achieve maximum performance Video cards, regardless of image quality, you should disable smoothing or install the lowest quality. Turn off the triple buffering, this can be done in the Open GL settings. If a laptop is used, then open the power settings. You should turn off the energy saving mode for the selected video card, which increases the performance of the video adapter while working from the battery.

Hello everyone!

Not enough quality schedule is a big problem for each PC user, and especially for gamers. What excellent characteristics didn't have your computer, but if you are a lover computer gamesYou wish to squeeze out of your car maximum.

Of course, it is most often enough to solve this problem simply change the video card. But the quality of graphics can be improved without a video card using certain software methods.

In this material I will tell you about how to improve graphics on a computer with various methods.

Hardware method

As I wrote above, the simplest method of improving graphic data is the acquisition of a new, more powerful video card. You can immediately go to the store and consult the seller about which card is best to install on your computer or pre-read review articles on this topic.

Install it will not be difficult. Included with the card goes the disc on which the program of installing its drivers is contained.

Improved image can also be achieved thanks to the acquisition of more powerful processor or an increase in RAM.

Balanced system

It must be remembered that the normal operation of the computer is possible only if the system is balanced. If you have little RAM or a weak processor, then installing even the best video card, you will not achieve anything.

But on the other hand, if there is a weak video card, it should not be thought that the enlarged memory is either installing a new processor will be able to solve the problem. At the cost of the processor and the map of almost the same (for computers of a game type, it can be up to 15,000 rubles). An increase in memory will cost a little cheaper, but it all depends on how specifically you want to enlarge it.

Software

If you want to improve graphic indicators, but you do not have financial opportunities to acquire expensive new products, you can "pump" a video card using software methods, simply speaking, optimize its settings. To do this, you need to first find her settings for this:

1. Click on the right mouse on the desktop
2. In the dropping menu choose "Properties"
3. Enable the "Parameters" tab
4. If, except for video card drivers, on your PC installed special utilities, then click on the "Advanced" button.

The above path should be used for Windows XP. As for Windows 7 and Windows 8, it is necessary: \u200b\u200bgo to "My Computer" here, in the drop-down menu click "Properties", select the Device Manager item, you will find a video adapter in the list. Find your video card, right-click on its name and call "Properties".

In my Windows 10 I do this:

1. Right mouse button on the desktop
2. I choose the "NVIDIA control panel"
3. On the left in the menu click on the "3D Parameters Management" item

Making the above manipulations described above, you will see the map settings panel. The parameters will be a bunch, but for work you need only a minor part of them.

Filtration, smoothing

Since NVIDIA video cards are currently the most popular, we will disassemble the settings on the example of these cards. In principle, others are configured in almost exactly the same way.

Among the set of settings you should be interested in " Parameters 3D management", Since it is with this section that you will work. In this section, the following items are of particular interest:

• Smoothing - parameters;
• Vertical sync pulse;
• Anisotropic filtering.

The values \u200b\u200bof the first I. last setting - 32x, 16x, 8x, 4x, 2x. And the larger the value, the more pleasant and smooth it turns out the picture.

The vertical sync pulse (clause number 2) can be controlled by the parameters of the 3D application, be in a disabled or on state. To maximize graphics, it should be enabled.

In some cases, access to the "Parameters - smoothing" setting can be closed. To set the desired values, you need to install "Enlargement of the application settings".

That's all, dear friends! Now you know how to increase the clarity, brightness and other image characteristics.

By the way, this and many other things will teach you a course " Genius genemist" Here in a simple and accessible form it is told about all the intricacies of work on the computer. Consider computer literacy with this course can man of any age. He is able to make a real computer "ACA" from any "kettle"!

Share a link to this article with friends in Soc. Networks, for sure, one of them is an amateur video game, and this article will be useful. Do not forget to subscribe to updates. See you on the pages of my blog!

Yours faithfully! Abdullin Ruslan