Unable to run AMD Catalyst Control Center at the moment how to fix. AMD Catalyst Installer: Incorrect Driver Recognition WHY CATALYST CONTROL CENTER is installed

One of our readers asked the council, and the editors of Tom "S Hardware found a very unusual problem. At first glance, it is unlikely to seem serious, but the frequency of its manifestation still anniversary. After watching several forums on the Internet about this problem, we came to The conclusion that it is not a private for our reader. It was rooted about the question, especially since we did not find any reasonable explanation of the problem. The problem itself is that the device manager / Device Manager and the Catalyst installation manager cannot come to consent , Installed driver of the northern bridge or not.

The reader has already contacted the service aMD supportBut since the computer worked without any obvious problems, he received an answer that everything should be in order. But this answer did not satisfy the reader - and us too. We intentionally went through the process of installing Catalyst drivers on three different systems Windows 7, and were able to repeat the problem in all cases. In the end, it turned out that our reader was right.

The problem manifests itself under the following circumstances.

• Windows 7 (x64, x86);
• motherboard at AMD chipset;
• drivers from Catalyst 10.2 to 10.5 (latest version at the time of tests);
• installation in Custom / Custom mode (not in Express mode / Fast).

We hope that the article will be useful because the old but very effective trick, we will tell a little later, turned out to be a solution to the problem. In addition, it is potentially able to eliminate other "pitfalls" that may occur when installing AMD / ATI drivers. We will also briefly consider a hidden option in the Catalyst installer, which can also be useful.

To resolve all possible sources of errors, we used the "clean" installation of Windows 7 without installed drivers or updates, with the exception of Windows 7 updates.

In the Device Manager / Device Manager, in the System / System Device section, we have selected "AMD PCI Express (3GIO) Driver", which detected the ATIPCIE.SYS (x86) or atiPcie64.sys (x64) files. These drivers are installed by default. We recorded the version of installed drivers before further installation.

Then we unpacked the current version of the Catalyst drivers (at the time of testing) in the directory we specified, after which they launched the installation, leaving it at the initial stage, where the installation or removal of drivers is selected.

We have chosen "Uninstall", after which the "Custom Uninstall" to get a list of components that the installer recognizes. And the result confirmed the problem revealed earlier: the Catalyst installer did not recognize any installed components, although the driver was already installed Windows 7 and updated through Windows Update..

After re-starting the installation, we chose "Installation", after which "Custom Installation".

In addition to USB drivers, we have the option of installing the Northern Bridge Drivers. What is interesting, the proposed version was the same as already installed. We still chose the installation of drivers to avoid confusion. Installation completed successfully.

After the mandatory reboot, we reopened the Catalyst installer to check which options will appear in the removal item. With the exception of uSB driversWe did not find other options. Then we again launched the installer already to install the drivers, after which they found that the driver is invited to install again, that is, nothing says that it is already installed!

Let even this problem can only be detected in the Custom / Custom installation mode (in Express mode / fast on the installation process, extremely little information is displayed), we were puzzled. Well, let's reveal the reason and present a possible solution.

Possible reasons

After some experiments and removal "in the forehead" (with the Cleaner utility and manual erasure in the registry), we concluded that the AMD Catalyst Installer and drivers received through the Windows Installation and / or Windows Update do not interact with each other. Although manual installation and removal of the driver via the device manager / Device Manager is running normally, the Catalyst "forgets" installer about the installed driver, offering re-installing the installed drivers, not exclusive AMD (that is, they are already offered Microsoft).

At the same time, the reverse script is not possible, since the drivers are not defined by the installer during installation or deletion. In principle, only AMD can answer whether this is a consequence of the protection mechanism or an error of the installer to determine the drivers.

But I once again I would like to note that the identified problem does not lead to any failures of the computer. It can be called an annoying oversight that makes confusion for those users who regularly tracks the versions of the drivers so that the computer always worked with the most the newest drivers. But our small study showed that such a situation has already existed for quite a long time, and from AMD still has no explanation or corrections.

The Catalyst installer begins its work from extracting files to the specified directory. It will take us to fulfill the trick.

We switched to the directory with unpacked files, after which the "config" subdirectory was chosen. It has the file "InstallManager.cfg". We opened it with a suitable text editor Notepad / NotePad. Below is the contents of the file.

Pay attention to the item "WorkAroundInstall". By default, it is set to "false". We activated the item by setting the value "True", after which you saved the file.

Then we launched the setting from the directory by running the setup.exe file. Pay attention to the installation options with which we agreed.

The situation as we see has changed: now after executing the Catalyst installer, only exclusive AMD drivers are saved.

Additional advantages

A similar trick also helps in situations where the Catalyst installer for some reason refuses to install the driver, despite the "iron" connected and the perfect work of the old driver. So if next time you will face an incomprehensible installation problem, remember that the modification installation File May create a miracle. We used a similar trick when the current version of Catalyst 10.5 refused to be installed on systems with already installed versions 10.2 or 10.3.

As we have already described a little higher, we switched to a directory with unpacked files. Then in the "Config" directory, after which they opened the "InstallManager.cfg" in the notebook / NOTEPAD. However, in this file, we also found the "Show Update" item below. By default, it is set to "False". We activated this item by setting the value "True", after which you saved the file.

Then after starting the installer, a new option appears.

If you select the "UPDATE" option, previously hidden, then the new master will start.

Here you can update individual components without having to remove them. As far as we understand, the Installation option performs only limited removal procedures or does not fulfill them at all, and the Update option combines full removal and the installation of selected components in the same reboot cycle. This saves on one cycle to reboot, which is required with full removal of drivers. Also, this step is useful after removing drivers and reboot, since Windows can automatically replace remote drivers against your will.

If you are a user of Catalyst drivers, then perceive the identified problem calmly. At first she may seem strange, but this problem will not lead to serious collars. In addition, if you know some tricks, you can solve many similar problems easier and easier than it may seem at first.

Manual editing configuration file Catalyst can help solve similar problems with the one that we have been described. In the article, we described the steps in detail to help inexperienced users. Perhaps AMD somehow responds. The more functions are contained in software package, the more difficult it becomes. And the errors will occur inevitably. In fact, the question is how timely the errors will be detected and eliminated. All this should be considered when filing complaints.

Catalyst Control Center is softwareThe AMD, which is designed to manage and configure video cards (AMD brand only). This software is a single control center that does not require additional programs Work, and includes all the necessary tools.
The Catalyst Control Center program allows you to finely configure the video card work options, monitors the driver updates that download and installs automatically from the AMD official site. If you are the owner of the AMD video card, then you just need to download this program to properly configure and increase the performance of your video card for comfortable work.

Unfortunately, this software has stopped producing and maintained. In December 2014, AMD has released a major updating of Catalyst Omega drivers, and after almost a year decided forever to abandon the former brand used for Thirteen years. Thus, the Catalyst Control Center program is no longer supported by 2015, a new Radeon Software CRIMSON Edition software has been released in replacement, which is relevant to today and has a set of the most recent drivers with more advanced functionality.

Many continue to use Catalyst Control Center to configure their video cards, as this program has very simple and understandable interface With all the desired set of tools.

Main functionality:

• Configuring performance.
• Desktop management.
• Configuring performance for working and viewing video rollers.
• Setting the switch between two graphics processors.
• Setting performance in games.
• Video card power management.
• Driver update.
• Notification of innovations in updated drivers.
• General information about the video card.
• CPU processor frequency control.
• Management and setup operation of more than one monitor.

Due to the permanent updating of the drivers for their video cards, AMD was necessary to adjust the parameters of its video card for optimal and most productive work with different programs And games, just for this, you need a Catalyst Control Center program.

This software can help you even if you have a pretty old video card, the program will help properly set up the video card and achieve optimal work With programs and slightly raise FPS in games.

This application independently tracks all changes in the updated video card drivers and notifies the user about it.

Also, Catalyst Control Center will help you in connecting and configuring 2 or more monitors to one or more video cards.

You could encounter the fact that the monitor is dim and not very efficiently transfers colors and contrast, using this program you can configure these parameters themselves to bypass the standard monitor settings.

Realizing the entire meaning and functionality of the Catalyst Control Center program can clearly understand that if you are the owner of a computer or a laptop built on the basis aMD platformsYou just need to install this application to use it in setting up and controlling your computer or video card.

Installation

To begin with, we need to download this software from the official site, for this, go on the link:

https://support.amd.com/en-us/kb-articles/pages/latest-catalyst-windows-beta.aspx#

In the window that opens, click on the link that corresponds to the version and the discharge of your operating system, after which the installation package will be loaded. This software is suitable for Windows 7/8 / 8.1 / 10 operating systems with the discharge X64 and X32.

After you downloaded Catalyst Control Center, run the installer and pass all the installation steps, when you select the installation type, select " Fast installation"When the installer will check whether the drivers are installed for your video card and install the Catalyst Control Center itself.

After completing the installation, reboot the computer, and run the program.

When you first start the program can start the program for quite a long time, so you are patient and waiting.

This completed the installation of the Catalyst Control Center software.

Verifying Driver Update Video Card

Catalyst Control Center independently monitors driver updates to your video card. In order to check the update and version of the driver, go to the "Information" menu and select "Update software".

In the tab that opens, click "Check the availability of updates". In the event that the updated driver is detected, the window will appear in the Offer from, press the "Download Now" button and the program will automatically download and install them.

Configuring performance under your requirements

First of all, what needs to be done when you first start, it is to change the standard window view to the extended. This can be done in the "Parameters" menu, which is located in the upper right corner. In the drop-down menu, select the "Extended View" option.

Thus, all tools for setting up in this program will be available to us.

It is worth remembering that if you are using a computer that is fully built on the Base of the AMD platform, then you must have 2 graphic kernels, built-in (built-in video kernel in the processor) and discrete (video card). In this case, when setting up a system through the Catalyst Control Center program, the "Energy Saving" marks will refer to the video kernel embedded in the processor, and all parameters with the "high-performance" mark will be applied to the discrete video card, which is connected to the PCI Express connector.

Setup viewing video and photo

In order to configure the work and color reproduction of your video card when watching movies, you need to open the "Video" section and go to the Color tab (Energy Saving Graph. Adapters), set the settings mark on the "Custom" section.

After that, using the tool to configure a picture under the parameters that you like most.

Next, in the "Video" menu, select the following tab "Quality (Energy Saving Graph. Adapters". In this window, we remove all the daws, from all points, except for "deinterlacing" in order not to load the graphics processor once again and increase the amount of FPS when viewing high-quality video 2k and 4k.

The next step in the configuration of video viewing options and the photo will be the "AMD Steady Video" section in the "Video" menu. This feature allows you to stabilize the trembling video when shooting a movement. This option will reduce the degree of videos trembling for a comfortable view, but also once again load a graphics adapter, so I advise you to deactivate this option if your video card is low-power.

As for sections "Color (high-performance graph. Adapters)" and "Quality (high-performance graph. Adapters)" set the parameters by analogy.
And at the end of the settings for viewing the video and photo in the "Accelerated Video Conversion" section, we put a daw on "Enable hardware acceleration" This parameter will reduce the graphics processor when playing high format video, or when installing and creating video clips, through special programs.

Setup for games

In order to configure the performance of your video card in games, you need to go to the "Games" menu and alternately configure the parameters of 3D graphics in applications. To do this, we need to open the "3D application settings (energy-saving graphics adapters)" and "3D application settings (high-performance graphics adapters)", actually in these sections and configure graphics in games for different models of video cards.

It is worth noting the section "AMD Radeon Dual Graphics", this option is developed by AMD specialists and, provided that your computer is based on the AMD platform, it allows you to include multiple graphic processors for collaboration to improve the quality and performance of graphics. I advise you to include this feature, as it significantly increases the performance of the video card in games and applications that require accelerated graphic processing.

Setting system performance

To configure the performance of the entire system, we need to open the "Performance" menu and select the CPU Power item. If you use the computer, then the frequency of the processor is set to the maximum value. In the event that you are the owner of a laptop based on AMD, then you should easily approach this setting, as we will be available 2 processor frequency settings.

• From the battery. This parameter is to configure with the meaning that when setting the maximum parameter, the battery discharge speed increases, as the processor will consume more electricity. Therefore, if you want to extend the time of the laptop from the battery, expose not the maximum value.
• Connected. This parameter can be set up to the maximum value to increase the performance of the central processor, including if your laptop is connected to the network and does not use the battery resources.

Switching between these modes occurs automatically. Consider that the temperature of the processor at these settings may increase.

As for the AMD Overdrive paragraph, this parameter allows the Catalyst Control Center program to independently explore all the overclocking options for your central processor and notice as suitable as possible to increase productivity. Also in some versions of AMD Overdrive drivers, control the speed of rotation of the video card or laptop coolers. I advise you to disable this option and manually configure these parameters in the "Power CPU" section above.

Power settings

In this section, you can more finely configure the power parameters for laptops, namely power consumption under the conditions of using a laptop from the network or from the battery. If you are a computer owner, then I advise such parameters as "PowerPlay", "global switchable graphics parameters" set the value to the "Maximum Performance". When choosing such parameters, the system will not save electricity.

If you have a discrete and built-in graphics of one AMD brand, then when using the "Maximum Performance" parameter, the system will always play schedule from the discrete video card. In the event that you select another parameter, then the system for saving the electricity will switch between two video cards, which can badly affect performance in games, but increase the battery life.

Read more Consider the "Switch Parameters" item. In this section, you can configure the specific performance parameters and the use of the desired graphics core separately for each installed application On your computer. So for games or applications that reproduce video high resolutionYou can set "high-performance" parameters, and for applications that do not require good graphics processing, and to once again not load the system, you can set the "Energy Saving" parameter, which will specify the system to use the built-in video chip for these applications.

When using the "application monitor" function, which is located in the "Monitor of the Switchable Graphics Adapter Applications", you can install automatic switching Graphic adapters between applications.

We reviewed the parameters in which it is possible to configure the performance of your video card to the maximum value. As for the remaining partitions, it will be shortly described below, since their settings will not affect the system performance.

Causes and the solution that Catalyst Control Center does not start

The reasons for which Catalyst Control Center stopped running may be several. Consider common causes and methods of their solutions.

Outdated drivers. One of the reasons that the program has ceased to start can be outdated drivers, as a result of which the conflict between the Catalyst Control Center and the video card drivers and the launch cannot be done. This problem can be updated drivers, for this go to the official site AMD and install the latest version. Drivers for your video card.

Incompatibility. The same reason that the launch does not happen may be wrong set version CATALYST CONTROL CENTER software.
The solution to this problem will be deleted and installing properly software that is suitable for your operating system. To do this, check the bit and the version of your Windows OS, and then go to the official website and download the right version for you.

Antivirus programs. The reason can also be blocking Catalyst Control Center antivirus programs.
The solution to this problem may be temporary disabling the anti-virus program or the Catalyst Control Center in the exception list.

Damage to the program files. Perhaps you mistakenly deleted some files of the Catalyst Control Center program directory or did it for you antivirus program. It is also not necessary to discard the option that sectors hard disk were damaged.

The solution for this reason can be a complete deletion and reinstalling software.

If the problem with starting failed to decide, and the error "cannot start the AMD Catalyst Control Center is currently" remained, then you should update all the drivers in your Windows OS.

How to delete this software

To remove AMD Catalyst Control Center, use the standard Windows tool.
To do this, open the control panel. To open the control panel, press the Win + R key combination and in the "Run" line enter the "Control" command.

In the control panel window that opens, click on the "Delete Program" item.

We find the Catalyst Control Center program, click on it with right mouse button and select "Change" in the dropping menu.

In the installation wizard that opens, select "Quickly delete all AMD software components" and click Next.

We expect to end the deletion, after which you reboot the computer.

Conclusion

After reading this article, you got acquainted with AMD software, a single AMD Catalyst Control Center. With this program, you can make the best possible settings to your video card to increase productivity in games or when viewing high format video and movies. The big advantage of this program is the ability to customize the system using more than one graphics processor.

To date, AMD Catalyst Control Center is no longer supported by AMD, as a new one was released. radeon program Software CRIMSON EDITION, in which new features have been implemented and setting up tools. But even after that, many continue to use them, as it has a very convenient and understandable interface with a set of all the necessary tools.

If you are the old AMD brand video card and want to run applications that require high graphic processing, then you should resort to the adjustment of the video card steam cards via AMD Catalyst Control Center to improve performance.

Good day, ladies and gentlemen, familiar, readers and other individuals! Today I will try customize video card.

We have already talked a lot about the driver, starting on, and ending with all sorts of one, and all sorts of other differences. Today we will continue this topic and let's talk about more detailed setting.

It will be about picking the driver settings on the example of AMD Radeon video cards (ATI) using the utility built into them. Here we will not talk about temperatures (because they talked to), the acceleration of the video card (because they said) and the speed of rotation of the fans (because they also talked), and consider the functionality of the software that comes in the kit and a bunch of all settings (which , including encounters and applications).

By the way, even if your card is not from this manufacturer, the article should be read to know and, by analogy, be able to configure all sorts of anisotropic filtration, smoothing, morphological sample and filtering, triple buffering and much more.

So, the key to start, moved.

Introductory verification

Attention ! Hereinafter, part of the miserable (water) of the text, when updating the article, is preserved the extension of it much and fully rewrite (or delete) there is no desire for various reasons, and the original author was different in the text. Have it in mind. Otherwise, the content to help you (it is clipped).

I think not to rumor, if we assume that many, reading the site "" "project, no, no, and sin on a free minute to sit behind your favorite toilee, in order to plunge into the colorful world of virtual reality.

But here's not a task, not always our Wishlist (iron under the hood of PC) coincide with system requirements Newly released toys. And you want to smack, then I still want, and not ababa, how, and so that I even moved something on the screen and it was said, and did not brake and caught. What to do in the current situation?

Do not buy with each release of a modern toy new stuffing for your computer, and, in particular, as the most important component of modern video games? I do not know how you have, but I have no desire to give my blood in just 1-2 hours of virtual pleasure a week.

At first glance it may seem that the exit, as in addition to throwing money in the iron, no, but it is, and it is very free and quite an effective and called it - setting the video card drivers on maximum productivity. From you, as from the user, only straight hands are required :) and this note.

So, the gentlemen are good, let's start using all the juices from your vidayakhi, by adjusting its hardware. First of all, I would like to say that it is this article that will be devoted to users who under the hood of their PC will grow a video card from AMD, i.e. Radonkers. However, those readers who gave their vote to the NVIDIA piggy bank, also do not worry for you. We prepare even more tasty article.

Actually let's go to the essence.

Introduced on the topic and article

Due to the fact that the article is periodically updated and maintained up to date (as far as possible), but does not correspond entirely, here you can find two versions of the described drivers and settings for.

One of them leads a speech about the "old" drivers for appropriate cards and software, as well as for the inner layer and interface (sometimes it can be gained to it on certain systems, types of drivers, etc.), I, we are talking about that you can See above.

The second version (under a different subtitle) describes the visual and logical type of a newer version, namely AMD Radeon Software (it is, at different periods of time, - Crimson, Crimson Relive and TD and TP). You can see it below (clickable):

One way or another, regardless of the type of software used (and the first, and the second, it is just a driver's environment), settings (under them are the most samples, Shader's cache, anisotropic filtering and much more), in its semantic content , similar and it is they play a key role.

Therefore, the latter are put in a separate subtitle, the content after which is the most common (including for all video cards) and relevant.

Video card drivers settings separately from versions and interfaces

What you need to understand here (and further) before setting up:

• If you can't define the difference to the eye, then you do not need to set the maximum value for anything or search which one is better than TD and TP, because it will be letters for letters, numbers for numbers and other things;
• If everything works fast and you do not meet corners and irregularities, then no higher values \u200b\u200bare simply needed;
• If everything works slowly, then even then and only then you should pick up settings, methods, degrees and methods;
• What is slow and fast, corners and roughness, Everyone determines for itselfBecause it depends on the permission of the monitor, the speed of its response, applications and subjective sensations (someone "Lanenki" seems the norm, someone on the contrary little and 16x MSAA).

Now about the settings themselves.

Smoothing mode

determines the levels, degree and method of smoothing surfaces in 3D applications:

• Eliminates the ladies (angles) on the screens from various models;
• The driver (not in the application) usually has three global values: use application settings, improve them, or override;
• When overriding and improving allows you to select the degree of smoothing (2x, 4x, 8x, etc. and TP, in particular the values \u200b\u200blike 2xeq and TP) from which the quality and performance directly depends (stronger smoothing -\u003e requires more resources -\u003e
• In the applications themselves (non-driver) often (for some time), you can choose the method (type, option, method, call as you want) - SSAA, MSAA, CSAA, NFAA, FXAA, DLAA, MLAA, SMAA, TXAA etc;
• The difference in degrees and methods quickly and easily is in search engines (better immediately in search by pictures) or the eye is defined by the eye in one or another application.

Smoothing method

Determines the method (technology, type, option, method, call as you want), which is used when smoothing:

• It conventionally has three gradations (in the driver settings), - multiple sample, adaptive sample, redundant sample (about the application settings is described above);
• From the method directly depends on quality and performance (stronger smoothing -\u003e requires more resources -\u003e if they are missing, then less productivity);
• It is recommended to use an adaptive option, change the same with performance problems and / or insufficient smoothing When using degrees smoothing.

Morphological (not to be confused with anisotropic) filtering

Additional method of smoothing and image filtering. "Litless", rarely apply, is redundant:

• Theoretically should improve the image quality, but almost often negatively affects the performance of the cost of dubious improvement of smoothing;
• Very crookedly speaking, it does not have so much smoothing as the erosion of the final image and its additional filtration, after applying the methods described above, for a more complete understanding (not sure that you need it) can be tried to read (eng.);
• For the above reasons, as well as in connection with often, rather, negative consequences (loss, brakes and TPs), it is worth the off (actually, it has two positions (inclice).

Anisotropic filtering mode

Improves the quality of textures and image as an integer, filtering images of textures on surfaces, strongly (and not very) inclined relative to the camera:

• The driver (not in the application) usually has two global values: use application settings or override;
• As in the case of smoothing, we can be 2x, 4x, 8x and TP, which determines the quality of filtration;
• The principle is based on the use of multiple copies of one texture with different details and constructing the number of textures (the minimum unit of the three-dimensional object texture, if you want, the pixel texture) along the direction of the review and averaging their color. He strongly loads the video memory (requires its high throughput, which in turn is determined);
• From certain years (from about 2007) almost does not affect performance in minus, but positively affects the image quality, so X16 is used everywhere and older.

Optimization of surface format

As in the case of morphological filtering, it is an additional filtering method, only in this case, non-smoothing, and textures.

• Theoretically, as well as anisotropic filtering, improve image quality, additionally filtering textures;
• Almost (and visually) noticeably enough, the performance usually affects doubtful, but it can affect stability. It is recommended to avoid once again resort to this setting.

Wait for a vertical update (it is vertical synchronization, it is V-SYNC)

Synchronizes frame rate (FPS) with a monitor update frequency:

• The driver (not in the application) usually has four global values: always turned off, turned off (if not specified by the application), enabled (if not specified by the application), always enabled;
• In rare cases, it avoids rare, fast, visually minor "bands" as if tearing the image into two components, which proceed quickly and someone are even familiar (some do not meet or not notice them at all);
• Marketers are sold as a miracle of miracles, improving the smooth image and all so on;
• In fact, due to the restriction of FPS (especially if it is below the frame rate of the monitor as such) usually negatively affects performance with extremely dubious benefits;
• Approval of the reduction of noise, energy consumption and TP, method of restricting this performance, sudden from the finger, because in the modern world and in normal conditions the video card itself changes the frequencies, power consumption, speed of rotation and much more, without artificial restrictions. Two-time V-SYNC is generally nonsense, but now it's not about it;
• In connection with the foregoing, it is recommended to keep always keeping off. If you really, on the eye, in this particular game-configuration, see visual benefits after turning on-off, then on.

Triple buffering OpenGL (and not only)

Utrins, is an I / O buffer that accelerates the speed of access to formed data:

• Frames are drawn with a frequency below or above the screen update frequency, ready (formed by the equipment earlier than they were requested by the program that sent them to formation) are placed on the buffer (storage, so to speak), and the next frame is given to the CCED, thus decreases the delay + The program does not need to interview the equipment to get the screen update events and the algorithm can be freely performed as quickly as possible;
• Accordingly, there are double buffering (it is usually used), there is a triple (just what we describe now), the double uses two buffer, triple three (maybe more, but it no longer gives a tangible difference);
• Double: If there are two buffers in the system, a and b, it can display a buffer B, while at the same time forming a new image in buffer A, but it is necessary to wait for the change of buffers due to the delay of image formation;
• Triple: If there are three buffers in the system: a, b and in, she does not need to wait for the change of buffers. It can display buffer B, forming an image in buffer A, a little more.
• What to do: It is worth turning on, despite the restrictions.

Shader's cache

Allows you to store compiled shaders in the cache, which sometimes can significantly speed up the processing, reduce the load on the CPU and GPU, operating immediately ready-made data without a compilation and taking them from the storage.

• There is a value "Disabled" or " optimized AMD"(In other maps, the settings may not be, called otherwise or enabled by default), it is not recommended to disable it, because it allows you to achieve a more smooth video delays without unnecessary delays on rendering, i.e, leave an optimized or on position..

Tessellation mode and tessellation as such

This thing is responsible for the global improvement in the picture. At the base level, this is the method of splitting the polygons into smaller parts.

The use of tessellation to a rough model (left) allows you to create a smoother model (on the same picture, but in the middle), the use of shift maps (on the same picture, but on the right) provides characters realism of the cinematic level.

• As part of the driver, there are three parameters: AMD optimized, use application settings and redefine application settings;
• Most often it is worth leaving as it is, but more often, if for some reason the FPS in the game with the requirements below (with a more powerful card) is small, as well as there are strange braces, friezes (fading) and drawdowns where they should not be, here It makes sense to use application settings and / or even manual mode redefinition;
• Override allows you to set levels from 2x to 64x and older, or disable at all. The level sets the most crushing and directly affects productivity and picture quality. With this meaning, it makes sense to play with this parameter if something goes wrong. Yes, and so too.

Energy Efficiency

Allows you to chew an order of magnitude less energy by price loss of performance:

• Turn off if you need performance. Perhaps this is all that is worth saying here.

Personnel frequency management

Allows you to select and put the frame rate limit in the application, allegedly, as in the case of vertical synchronization to add smoothness to the video.

• In fact, you need few to and why, with the exception of the inverse cases, when in the application artificially (settings that cannot be changed) is limited by the frame rate, here you can try to override this value to the slider, which allows, in rare cases, remove this restriction and work on Full (or the value that you indicated).

Perhaps, out general settings That's all you should know. Let's go through the interfaces of specific software, as well as OverDrive and Wattman.

How to set up a video card through the "old" software - Catalyst Control Center

In the process of installing / updating drivers (or, if you have already bought a ready-made PC with the preset OS), in addition to the module itself responsible for displaying on the monitor screen, the pictures, sets additional module entitled Catalyst Control Center (ACCC).

This software shell is a control center for working with video adapters and allows you to produce any manipulation of both the settings of the card itself and the connected monitor.

The default ACCC rests in the tray on the desktop as a small icon (see image).

However, for some reasons you can and do not catch the control center icon in standard place, then, to get started with ACCC you need to update your firewood on the video card.

This can be done in different ways, however, I prefer to do this with a special free utility From AMD called AMDDRIVERDOWNLOADER (Old Title).

Who is not aware, this is an automatic detection technology (search and detection) recent versions Drivers from the manufacturer. The advantages of it are in clearness, convenience, free and automation of the process of searching and downloading drivers. The minuses are that it does not always do it correctly, like any automated system.

Thanks to this, now you do not need to go to the manufacturer's website, search for the desired video adapter model, drive your OS and bit. You just download the utility, at any time you launch it and she herself determines whether there is a new one on your wood and pumps the desired distribution to you on PC. So, to start working with ACCC, update the drivers through the utility by passing to the official website in the Download section and clicking on "Download".

After downloading, you run standard installation Firewood, together with which you will also put our today's culprit Celebration - Control Center. To go to it, you must click on the icon (red-gray AMD) of the table of the desktop with the right mouse button and click on the appropriate lettering.

Essentially ACCC is nothing but user interface To install, configure, and access the AMD Radeon video card features and AMD hybrid processors. This application provides video settings for adjusting the display settings, display profiles and image quality.

ACCC plays a very important role in the operation of your video card and allows you to add the necessary FPS "s (parrots) in games. Those. With it you can on a completely decent flight level to launch a toy or an application that is initially more demanding about the characteristics of your PC and, In particular, video cards.

Note:
ATI Technologies, known for the production of computer processors, has developed a Catalyst Control Center (CCC) in addition to the Radeon Radeon line. The utility first became available at the R series video cards. After purchasing ATI AMD, the utility has become (in the old version) is called.

Immediately after starting the center, click on the "Parameters" button (above the question mark) and choose the item - " Extended view"(See image). Thus, we go to a more advanced mode with a large number of settings and a more convenient interface of interaction.

In the Options tab, you can also interest item " Enable taskbar menus"- responsible for displaying or no icon in tray and" Restore factory parameters"- rollback to clean settings, in case you have been agreed in optimization :).

Also clicking on the question mark, you call the extensive help on the control center, where you can study all the settings of the utility along and across.

So, as follows from the name utility, " Control center"- It acts as a hub for all options and functions associated with AMD video card. Run ACCC, users get access to different functions:

• Desktop Management;
• Setting up digital panels / displays;
• Configuring video catalytics parameters;
• Configure 3D printing;
• Performance management, AMD OVERDRIVE - CPU acceleration and graphics processor.

Let's analyze the main points of the settings and go through the most important tabs of the AMD Catalyst control center.

The first to what I would like to pay attention is item " Properties of desktop"In the drop-down menu" Desktop management". It allows you to resume size, screen update frequency, color quality and retouch.

Here we are interested in settings under numbers (1, 2, 3). It is necessary to set (if they are automatically determined incorrectly) the correct resolution, the bit (color quality), the screenshot frequency, and also set the orientation (landscape or book).

To turn this to be checked to get the documentation (specification to the monitor) and find the values \u200b\u200bof the first and third characteristics in the section " Technical parameters of the monitor”.

There are many settings here and all of them in the degree or me degrees for the beautifulness of the pictures, i.e. Brightness, chromaticity, contrast and others from them. It must be said that in most cases the standard settings of the center are quite satisfactory and do not require some special custom chemistry.

Therefore, it is better not to change them, because the change of one will lead to a violation of the overall balance and a change in the heap of related parameters. In other words, even small modifications can lead to the "floating" of the image. Useful settings for us here will be the Quality tab: video quality and deinterlacing.

We need to set the following daws (see image):

• "Dynamic contrast"This is an automatic brightness adjustment depending on the picture on the monitor. It is responsible for the best display of rapidly changing scenes, for example, when watching movies or in dynamic games.
• "Deinterlacing" is the elimination of interlaced or "comular effect" when viewing a video. If you extend, the effect of the comb is the driving around the moving object, i.e. When on the monitor screen, there are two frames of the frame, shifted relative to each other. Deinterlasing allows you to eliminate a similar effect.

Also for a smoother video playback process, you must put a tick on "Frame detection" in the video stream when using deinterlacing.

In the "Video" tab, there are still settings deserve our attention and this:

• AMD Steady Video - stabilization of trembling images;
• Global video quality;
• Accelerated video conversion.

If your home video shakes (as if after a big future :)), then you need to put a tick near AMD Steady Video. Setup " Global quality video” –> “Forced smoothed video"Allows you to provide smooth reproduction of the video stream without falling personnel. We put a tick there.

Setup " Accelerated video transformation"Allows you to connect to the process of converting video resources of your graphic equipment. Put a tick " Enable hardware acceleration"If you often cod video tools from different players and want to speed this process.

So, now you jump over two points "Games" and " performance"And we will focus on the" Information "tab. Actually there is nothing unusual, standard information from the manufacturer.

On the tab homepage AMD is interested in the item "Sheck for Driver Updates", which allows you to download the latest firewood to your computer, i.e. Refresh their version and the core of the Catalyst control center itself.

To download the "Flitter of Fires", it must be pulled out onto the blue arrow and the process of updating the drivers will start.

The following two tabs are "programs" and " Hardware devices". Make it possible to learn in detail about the system hardware devices, the graphics adapter and in general, to get information about the system (button " System Information”).

FROM basic setting Understood. Let's now take a look at the possibilities for productivity and overclocking that live in the Overdrive section.

Overdrive in the "old" version of the drivers from AMD

If you are an avid gamer and are the winner of AMD video card, then you are right to count on some increase in its power completely free. Optimal I. proper setting It will help to squeeze the cherished FPS in games and add speeds in various 3D-expansions. For this B. control center Answer two settings: " Performance"And" Games ".

Consider them in more detail and begin in order.

AMD OverDrive Technology - AMD development designed to overclock the video card and graphics processor at the driver level. To start using it, you need to read and accept the terms of the license agreement (see image).

I think you have frozen the question: " What allows you to make AMD OverDrive and how it is useful for me as a user?". I answer she:

• It has sets of pre-installed parameters for beginners and fans of overclocking. You can easily select a preset memory profile to achieve optimal DDR3 memory speed. You can also manually monitor the performance parameters from the BIOS and create your own profiles for specific applications;
• Through the automatic frequency adjustment makes overclocking even faster and easier;
• Allows you to control the speed of rotation of the fans to increase productivity;
• Allows you to control all your performance settings, including the clock memory frequency, voltage and timings.

After making the license and warning conditions, that if you have a better curved hand overclocking (:)), it floats the next window.

Here you can play with the settings and add parrots to applications. This method works as follows. We change to several units of any of the parameters, go to 3D-Using, launch the FPS - if there is an increase in the parrot and everything is steadily, it means that we leave these parameters. Otherwise, you roll back to the default parameters (key E) and change the parameters more carefully, before finding a steady-high combination of settings.

Note:
So that the changes have entered into force and reflected on the performance of the system, you must put a tick " Enable Graphics Drive”.

This is what results (in terms of performance) I managed to achieve simply playing with the video card settings and (to a lesser extent) processor frequencies.

The default settings properly:

... and the amount of FPS in the Metro Last Light Redux game (1080p resolution, the settings are very high) at them:

But what they were changed to (at the card):

... and the amount of FPS in the Metro Last Light Redux game with the same graphics settings is:

In total, we have 41 against 44 - quite a decent result for a pair of gestures with the settings of the map and (to a lesser extent) of the processor. If you sit in a thoroughly and twist and how the processor follows, then 5-7 extra parrots can be accurately knocked out.

Note:
In addition to the video card you can with aMD help Overdrive can accelerate the processor. However, he must be from AMD.

As you hope, remember, another item remained on the agenda, this is a configuration of 3D applications. To get started with them go to the appropriate Menu of ASSS:

We see the investment " System parameters ", And there is a table with two columns:" Features "and" Settings ". Below, you can add a game application ("Add" button) .exe format and set graphics parameters for a specific game (application), i.e. so-called profile.

The local settings (smoothing, filtering, sample, and everything else) you specify based on the above-mentioned above, that is, in the first half of the article under the appropriate subtitle.

How to configure the Radeon video card through the "New" software - AMD (ATI) Software (CRIMSON and Further)

If you have a new card, the latest system and driver, then most likely you have already installed a fresh version of software to work with the driver settings. It is much more visual, laconic and contains the smallest of tabs ( Games, Video, Relive, Display and the system), each of which remotely allows you to control the video card.

The "Games" section is responsible for managing the main performance settings that are listed above, that is, in the first half of the article under the appropriate subtitle.

The "Video" tab is responsible for settings of chroma, brightness and contrast for video and everything that happens to it. There are several pre-installed profiles here, the result of which is visible, which is called, on the fly (Run the video and poke the profile with the mouse).

RELIVE, if installed, allows you to capture video and manage the settings that are connected with it. Here we will not comment on anything, the benefit is not about that.

The "Display" section allows you to control the resolution settings, change the color temperature of the monitor, so to speak, programmatically, set ultra-high resolution, scaling, and TP.

The last partition called "System" and contains the "Overview" tabs, " Software"And" equipment "will help you learn the current version of the driver, frequency, the name of the video card, its detailed characteristics and some of the computer parameters.

As you can see, everything is more loacon and convenient here.

Configure Wattman in the "new" version by drivers from AMD (ATI)

In the Games section, there are two subsections, one of which is responsible for global settings, the second for deeper (overclocking), which, partition, is called (at the time of updating the article) Wattman, which came to change Overdrive.

If you decide to overclock and change the frequencies, then go to this section and agree with the warning that tells you that everything you do - you do on your own and risk, you can lose guarantees and other things (in general, read the text ).

Next, you will see a big such sheet (you can stretch the window with the mouse), the first section in which is responsible for monitoring the status (frequency, temperature, speed of the cooler and TP) over time (i.e., when you first start it can be empty, you should wait).

The second section allows you to change frequencies simply and quickly by pulling the slider to the desired percentage and, at the same time, seeing how it affects different states and tension. Voltage can be set and manually, but it is urged urgently not recommended. The interest is worth increasing slowly (better than 1%), after each of which long test the video card to stability, trying to achieve maximum increase at maximum stability.

The third section similarly adjusts the values \u200b\u200bfor the memory frequency and memory voltage (which is also not necessary manually changing if you are not an experienced overclocking), thereby disrupting it. It is worth overclocking the parameters in turn (separately frequency and separate memory), and then try to tie them together, because one depends on the other (see).

The last section allows you to control the speed of rotation of the cooling system coolers, depending on the temperature (right side) and in the specified speed range (RPM) (from a minimum to maximum + acoustic limit).

On this, perhaps, everything that is worth knowing here and you can know. We still recommend driving speed and acceleration through afterburner, detailed article on this topic.

Well, perhaps, all the settings that can be twisted to improve the "lethalnity" and the best "show" 3D-Site.

So that you have a clearer picture of the foregoing, I will give a general memo memo called " How to improve graphics performance for games?”:

Today we fully dealt with the topic of configuring video card drivers. I am sure, now each of you can do it right and, if necessary, squeeze out of your graphic babes of unnecessary parrots :)

As always, if there are some questions, additions, thoughts, etc., then welcome to the comments to this entry.

PS: For the initial existence of this article, thanks to the member of the team 25 frame

To make the computer to configure how the image generated by the system and applications, video card developers supplied with drivers for their equipment special programs. In case of graphic cards AMD ATI appropriate software is called. However, despite the fact that the company applies considerable efforts so that the user does not have problems with their software, the failures can still be observed in its work. So at one moment the user, when trying to open the CCC, can see the following message: "Unable to run AMD Catalyst Control Center at the moment." What to do in this case, let's figure it out.

The reasons for which AMD Catalyst Control Center may not start

The reasons why AMD Catalyst Control Center is currently not started, maybe several. Most often the corresponding problem is due outdated drivers . At the same time, the conflict can be called not only by the driver of the video card, but also other equipment (for example, the motherboard), since AMD by and large is focused on the newest hardware and software part.

The Secondary Prevalence Cause of the problem with the launch of AMD Catalyst Control Center in this moment - this is blocking some components of the Antivirus program. Many anti-spin programs do not work perfectly, in connection with which they can put very harmless to quarantine, but important files for operation.

Third reason - incompatibility of software with the operating system. Some users after reinstalling Windows Do not download fresh drivers, but install them, for example, with a CD, which was included with the video card. If the corresponding software was developed, for example, for Windows 7, and on a user's computer is already standing Windows 10, then there is a chance that it will not work correctly on it.

And the last reason: damaged program files. Perhaps some of the components were accidentally removed or the corresponding hard sector The disk was damaged.

How to fix the problem associated with the failure of Catalyst Control Center to run

To correct the message "Unable to start AMD Catalyst Control Center currently, you should try to reinstall the driver by downloading it a new version from the official site AMD. This will require:

1. Go to the site support.amd.com;
2. In the "Drivers and Support" section, select your version of the operating system;
3. Download by by clicking on the "download" button;
4. Run the installation process.

In most cases, it is not necessary to remove old drivers. The installer will make it himself, putting the old on the new one. However, if you still want to clean the system from the relevant programs in advance, then do the following:

1. Go to the "System_disk: \\ Program Files \\ ATI \\ CIM \\ BIN" folder and open the file "setup.exe";
2. In the window that opens, you need to select "Delete";
3. Press "Next", and after - "Ready";
4. Restart the computer;
5. After that, put new drivers.

If the corresponding actions did not help correct the error, "Unable to run AMD Catalyst Control Center is currently", then try updating the drivers for all devices. Also, it will not be superfluous to look into the antivirus, and see which files he can be placed in quarantine. If there are AMD CCC components there, they will be removed from there.

The net installation of Windows, as well as the installation of new hardware components in the PC, is almost inevitably endangered for the user with the need to search and add to the driver of the drivers of various devices. Video card as one of the most important components modern computers And laptops require installing components to be able to function properly almost first. The Radeon graphic adapters owners can practically not worry about this issue, because the powerful and functional tool is created for them - AMD Catalyst Control Center.

Download and update AMD drivers via Catalyst Control Center

It can be said that AMD Catalyst Control Center (CCC) is mainly designed to maintain the performance of video cards, which are based on the AMD graphics processor, at the proper level, and therefore the installation and maintenance of drivers must be carried out with this Without special problems. In fact, it is.

CCC installer is now called Catalyst Software Suite. It cannot be downloaded from the official site for modern powerful video card models - for them, developers have created a new application: AMD Radeon Software. Use it to install and update via a video card.

Automatic installation

The driver package for graphic adapters Advanced Micro Devices is part of the Catalist Control Center and all the necessary components are added to the system when installing the application. To install the video adapter driver, it is enough to perform a few simple steps.

1. Download the AMD Catalyst Control Center installer from the official site of the manufacturer in the section technical support. For getting the desired version Drivers need to determine the type, series and model of the graphics processor, on the basis of which the video card is built.

   

   After that, you will need to specify the version and the discharge of the operating system used.

   

   The final stage will unfold tabs and the choice of Catalyst Software Suite.



2. After the katalist installer is loaded, we start the installation.
   
   

   The initial stage is the unpacking of the component installer necessary for the user's specified path.

3. After unpacking, the welcome window of the Catalyst installation manager will automatically start, in which you can select the language of the installer interface, as well as the components of the Control Center, which will be installed with the drivers.



4. The CCC installation program "can" not only install the desired components, but also delete them from the system. Therefore, a request for further operations appears. Press the button "Install",

   

   which will call the following window.

5. To start automatic installation Graphic Adapter Drivers and software package Cataltie Control Center, Install the installation type switch to the position "Fast" and press the button "Further".



6. If the AMD drivers and software are installed for the first time, it will be necessary to create a folder to which components will be copied. The directory will be created automatically after clicking the button. "Yes" In the appropriate request window. In addition, you will need to adopt the terms of the license agreement by pressing the appropriate button.



7. Before starting the file copy procedure, the system will be analyzed for the presence of a graphic adapter and its parameters to install a fresh version of the drivers.



8. The further process is fully automated,

   

   you just need to wait for the installation and click the button. "Ready" In the final window of the installer.



9. The final stage - rebooting the system that will start immediately after pressing the button "Yes" In the window requesting an operation.



10. After reboot, you can check the fact of the driver's presence in the system by opening "Device Manager".

Driver Update

Software develops quite serious pace and AMD video cards drivers are no exception. The manufacturer is constantly improving the software and therefore should not be neglected by updates. In addition, all possibilities are provided to the catalist control center.

As you can see, despite the importance of drivers in the functioning of the Advanced Micro Devices video cards, their installation and update using Catalyst Control Center turns into simplest procedureThe holding of which usually does not cause difficulties even at novice users.