Menu
Is free
registration
home  /  Installation and setup/ Wire from the xbox 360 joystick to the computer. Proper connection of the gamepad to the computer

Wire from xbox 360 joystick to computer. Proper connection of the gamepad to the computer

Most modern video games are originally released for game consoles, and only then adapted for personal computers. As a result of this, many games are controlled using a joystick rather than a mouse and keyboard.

Connecting the Xbox 360 joystick to a computer is quite simple, since most computer controllers connect using a USB port, without installing software. At the same time, when connecting wireless gamepads to a computer, it will be necessary to install additional software and configure some operating system settings.

Wired gamepads

In order to connect a wired gamepad to a computer, you need:

  • Connect the gamepad to a USB port on your computer.
  • Wait for a sound notification that a new device is connected.
  • Wait until the drivers are installed and the message "The device is ready for use" appears.
  • To restart a computer.
  • Launch any video game.
  • Press the "Settings" button and go to the control settings section.
  • Assign actions to joystick buttons.
  • Save changes.
  • To start playing.

Wireless joystick

To connect an Xbox Wireless Joystick to a computer, you need:

  • Connect the receiver to the USB port of the computer. V stationary computers it is recommended to connect the receiver to the rear panel system block.
  • Insert into computer installation disk with the software that came with the receiver.
  • Wait for the installer to start or run it manually from the disk.
  • Install the drivers for the gamepad and receiver following the instructions on the screen.
  • Restart your computer.
  • Turn on the Xbox Wireless Controller by pressing the Guide button.
  • Press the connect button on the top side of the receiver.
  • Press the search button on the joystick, which is located next to the word "Xbox 360" at the top of the device.
  • Wait until only one indicator lights up on the joystick.
  • Launch a video game that supports gamepad control and change the control buttons.
  • To start playing.

Good day!

Of course, you can and even need to connect an xbox 360 joystick to your computer. The prefix is ​​already outdated and it is problematic to play modern games on it. However, if you have a powerful modern computer, you can play on it, while using the convenient and practical joystick from xbox.

Connecting a wired xbox 360 joystick to a computer:

  1. If you have Windows 10 operating system - everything is quite simple! Plug the joystick into a free USB port, the system will install the driver itself. If it doesn't, install Latest updates for the operating system.
  2. For Windows 7 and windows 8 you need to install drivers manually. Moreover, there are no drivers specifically for Windows 8, but drivers from the seven will work. Follow the link, select the language and bit depth of the operating system and click "Download". Install the resulting driver and you can play.
  3. Drivers for older operating systems (Windows XP and Vista) are also available on the Microsoft website (follow the link from point 2).

Possible problems when connecting a wired joystick xbox 360 to computer: if the joystick is not detected by the system when installed drivers- try using a different USB port. Sometimes the joystick does not work in the front ports of the computer, but works in the back. Also, the joystick does not always work in USB 3.0 ports.

Connecting an xbox 360 wireless joystick to a computer:

  • Family T + 80: description of the Beeline tariff plan, connection
  • How to save information from a tablet without connecting to a computer

    • With the xbox 360 wireless joystick it's still easier, but you need to buy a special adapter. In Russian stores it can be bought at a price of 2-4 thousand rubles, and from China for 300-600 rubles. Wherein Chinese version will work no worse than the one that you buy in Russia 5 times more expensive. You can order an adapter for the xbox 360 wireless joystick in the online hypermarket Aliexpress.

    The adapter comes with a CD with drivers for all operating systems of the Windows family, install them and enjoy.

    Computer games have become an integral part of the modern entertainment industry. Some game projects take years to create, and investors invest millions of dollars to design the right material, pay for the work of programmers, modelers and voice actors. In turn, games created with love and attention to detail, filled with an interesting story and gameplay, pay off in the first months of sales, and then bring huge profits to developers and publishers. A business built around the gaming industry is comparable to the movie industry in terms of the number of people involved in it.

    To get the full pleasure of your favorite game, it is enough to purchase a console and spend free evenings with it in front of the TV in the living room. However, if the user prefers to play on a PC, then Alternative option– connect the joystick from the Xbox 360 to the computer. The need for a controller is due to the fact that games are developed primarily for consoles, and only then transferred to personal computers. Mouse and keyboard based controls may not be as convenient and intuitive, and the gamepad is what the creators focused on when they thought out the gameplay and assigned actions. Depending on which gamepad is available - wired or wireless - the connection instructions will differ.

    Quick article navigation

    USB joystick

    In order to start playing your favorite games with a wired Xbox 360 controller, you will need:

    • Plug the gamepad into a free USB port on your computer.
    • Wait for a sound notification about the connection of a new device.
    • Wait until the system automatically detects the type of device and completes the setup by displaying an appropriate message that the gamepad is ready for use.
    • Launch game.
    • Go to the settings section.
    • Choose a control method and, if necessary, assign the desired buttons.

    Also, the original Xbox 360 gamepads have a special vibration feedback function. This feature increases immersion in the gameplay and gives the player more feedback from what is happening on the screen. If the running game supports this function, it is recommended to enable it.

    Bluetooth joystick

    Wireless controllers of the original Xbox 360 are good because they do not require being in close proximity to the monitor, and allow you to be at a comfortable distance for the eyes and enjoy the gameplay, for example, lying on the couch. The peculiarity of such controllers is that they require special adapters to connect to a computer, which are not supplied with the set-top box, but are always available in retail stores.

    These adapters also plug into a USB port and then connect to the controller via a Bluetooth signal. Software for the receiver is supplied on a disk with the device. To connect the joystick to the receiver, you need to press the signal reception button first on the adapter itself, and then on the button with a similar icon on the end of the gamepad. Once both devices find each other and pair, you can start playing your favorite games.

    For a full immersion in the game without limiting the possibilities, every gamer needs joysticks. Manufacturer Xbox console 360 has taken care of providing users with multifunctional gamepads that can be connected not only to the console, but also to the computer. The main thing is to know how to do it?

    This article will show you how to set up your Xbox 360 joystick to play on PC.

    How to connect a wired Xbox 360 controller to a computer?

    Today, gamers have access to a wide variety of gamepads that can connect to a PC in only two ways: wired and wireless. To start the game, the owners of the most ordinary wired joystick Xbox 360 just follow the following procedure:

    1. Connect the cable from the gamepad via the USB connector to the computer. Note: PC USB ports must be version 2.0 or 3.0. The ports on the front panel of the system unit may not match these versions, so it is recommended to connect the Xbox 360 joystick through the ports on the back panel.
    2. Wait for the drivers to load. For Windows versions 10, 8, 8.1, 7, driver installation is mostly automatic. If the drivers do not automatically download, you must add them manually by downloading them from the Microsoft website.
    3. The driver installation notice indicates successful connection of the gamepad to your PC. Now you can open the game and check the operation of the joystick. Sometimes, after installing drivers, you need to update their list so that the computer sees a new device and starts working with it.

    Produced in our workshops xbox 360 firmware. You can safely trust the many years of experience of our specialists. Call and sign up!

    Additional customization of the functions of the buttons and sticks of the joystick is possible only in the options individual game, just like on/off vibration feedback.

    How do I connect my Xbox 360 Wireless Joystick to my computer?

    Wireless gamepads give more possibilities player and do not tie him to a TV or computer for a limited distance. To connect an Xbox 360 Wireless Controller to a PC, you will need to purchase additional device– signal receiver (receiver). The fact is that the Xbox 360 joystick, when connected wirelessly, communicates with the console not through bluetooth signal . To connect an Xbox 360 Wireless Controller to a PC, a special receiver is required. This device allows you to set control over 4 remote gamepads and headsets.

    Unfortunately, you won't be able to connect the Xbox 360 Wireless Controller without a receiver.

    How to use the Xbox Joystick Receiver?

    Very simple. Setting up a wireless joystick for playing games on Xbox 360 via PC starts with connecting the receiver:

    • The receiver is connected to the PC via USB ports 2.0 or 3.0.
    • When you connect the receiver, Windows 10 (8, 8.1 or 7) starts automatic installation device drivers. If she performed without error, the receiver starts to work (the green indicator on the case lights up). If the drivers are not installed, you must download them manually through the "Device Manager" from the disk that came with the receiver, or from the Microsoft website.
    • Turn on the controller by pressing the button with the Xbox logo.
    • Press the connect button on the front of the receiver.
    • Then press the button on the top side of the controller and wait until the connection light stops flashing.

    A steady glow of the indicator near the Guide button on the controller means that the device is operating normally.


    Now you can open the game and check the functions of the buttons and sticks. If desired, in the "Options" menu, you can change the assignment of the keys and their sensitivity.

    Xbox 360 controller not working on PC

    In cases where the computer does not see the Xbox joystick, you need to perform a series of actions:

    • First of all, you need check usb port to which the controller or receiver is connected. You may need to reconnect through a different port.
    • Often the Xbox 360 controller does not connect to the computer due to a disabled function automatic update software in Windows system 10. In such cases, you must install all updates and try to connect the controller again.

    Gamepads are used by many gamers today. With their help, you can not only play, but, in general, manage computers. Meet different models joysticks. Some are PC-only, while others connect to consoles. In any case, it is necessary to correctly connect them to the main device. Otherwise, the device will not work. Wireless joysticks are very popular. We will connect them. In fact, everything is not as difficult as it seems. Especially if you use the "native" gamepad.

    About wired models

    First, a few words about how to connect a joystick in principle. Previously, USB models were popular. They are still produced and very successful work. But due to the presence of wires, such gamepads are being abandoned more and more often.

    To connect these devices, you will need:

    1. Turn on the computer or console.
    2. Insert the USB cable into the appropriate socket on the main device.
    3. Wait a few seconds.

    After done action will happen synchronization of devices, after which the gamepad will work successfully. This algorithm of actions is relevant for "native" set-top boxes. To connect the joystick from set-top boxes to a PC, you have to run special emulator programs. Nothing difficult! But we will try to understand how to connect wireless joystick to a computer or console. This question is asked by many gamers.

    Windows

    Let's start with the simplest. We are talking about connecting wireless gamepads from the series Windows to the computer. These devices work using Bluetooth technology. Therefore, there are no problems with them.

    To connect a wireless joystick to a PC, you need to:

    1. Turn on Bluetooth on your computer.
    2. Enable gamepad. It needs to be charged beforehand.
    3. Search for new Bluetooth devices on your computer. This is done using special programs or in the "Control Panel" - "Hardware and Sound". You need to click on "Add a new Bluetooth device".
    4. Wait.

    Will happen in a few minutes automatic search and installing drivers. After that, the gamepad will work normally in operating system. If your computer does not have Bluetooth, you will have to additionally buy a special adapter.

    From PS3 to PC

    Now let's move on to more difficult tasks. For example, let's try to connect a wireless joystick from PlayStation 3 to a computer. This will be more difficult to do.

    In general, the algorithm of actions will look like this:

    1. Install MotionJoy.
    2. Turn on Bluetooth on the computer and on the controller. The latter must have a charge.
    3. Connect the USB cable to the joystick.
    4. Open MotionJoy and go to "Driver Manager".
    5. Click on "Install all".
    6. Restart your PC and run the application mentioned earlier again.
    7. Open "Profiles".
    8. Select a profile for the gamepad to work.
    9. Go to BluetoothPair.
    10. Click on Pair Now.
    11. Disable USB.

    That's all. Now you can safely work with the PS3 gamepad on your computer without any wires. Fast, convenient, reliable. Sometimes there are crashes during games. This is normal, because we connected a non-native wireless joystick to the computer.

    PlayStation 4 and PC

    Today, many gamers play on PS4. This console has its own gamepads. And they can also be connected to computers. The main thing is to know how to act. The steps will be somewhat similar to the previous algorithm.

    To connect a wireless joystick for PC from PS4, you will need:

    1. Install InputMapper.
    2. Run the appropriate program.
    3. Enable gamepad.
    4. Enable Bluetooth on PC. It is advisable to purchase an additional USB whistle.
    5. Press the Share and PS buttons on the gamepad at the same time.
    6. Release when the joystick starts flashing.
    7. Go to "Wireless Devices" on your computer.
    8. Quickly insert the USB whistle into the appropriate socket.
    9. Select the desired gamepad in the InputMapper.
    10. Click on the "Connect" button.

    It is best to buy a wireless joystick for PC (For Windows series) and work with it. For example, to configure the gamepad using an emulator for PS4.

    XBox 360 and computers

    What if a gamer has a 360 xbox wireless joystick? In this case, the situation is not the best. Just like that, connecting the gamepad to the computer will not work. Standard Bluetooth won't work. You will have to buy a special adapter from Windows for the xBox 360.

    Once the user has the appropriate device, they will need to:

    1. Insert adapter into PC. For this, a USB connector is used.
    2. Enable gamepad.
    3. Open the program from the adapter (usually it is installed automatically).
    4. Select a joystick and wait for the drivers to initialize.

    Not the most the best way development of events. Many users are unable to cope with this task. Therefore, it is better not to suffer with the xBox 360. The gamepad can always be replaced. The xBox 360 wireless joystick is not always suitable for a computer. And that's okay.

    XBox One and Windows

    How to be the owners of "X Box Van"? They can easily connect the gamepad to the computer. Especially if the latter is running Windows 10 with the latest updates.

    In this case, just follow these steps:

    1. Turn on Bluetooth on the computer.
    2. Turn on the joystick.
    3. Press the small button on the top of the gamepad.
    4. Wait a few seconds.
    5. Select on computer under " Wireless devices" detected gamepad.

    That's all. Owners of more old Windows joystick off xbox one will have to connect in the same way as in the case of the "X Box 360". To do this, you will need to purchase a special adapter. Expensive and very reliable!

    Gamepad and xBox 360

    How to connect wireless joystick to xbox 360? This is another the simplest task that any gamer should be able to handle. Usually this operation does not cause any problems.

    How to connect xbox wireless joystick to console? To do this, follow these steps:

    1. Turn on attachment.
    2. Turn on the charged joystick. To do this, you need to click on the "Guide" button.
    3. Hold down the small button on the top panel of the device on the gamepad for a few seconds. You need to hold it for about 15-20 seconds.
    4. Release the button.

    If the lights on the controller are blinking, you've done everything right. Now you can safely use the console. Gamepad connected successfully.

    PlayStation 4 and native console

    What's next? As already mentioned, every gamer should be able to connect "native" gamepads to consoles. Usually detailed instructions can be studied in a special book attached to a particular console. The process does not cause any difficulties.

    We will try to figure out how to connect the PS4 gamepad to the appropriate console. Unlike previously proposed algorithms, when you first turn on the console, you will have to register joysticks. Otherwise they won't work.

    To connect a PS4 wireless joystick, you will need:

    1. Insert the USB cable into the console and into the gamepad.
    2. Turn on both devices.
    3. Wait.
    4. Press the connection button on the gamepad. This is a PS labeled control.
    5. Disable USB.

    Now a sufficiently charged gamepad can be connected using a special button on the device. If the device is not registered, you will not be able to work with it.

    Results

    We figured out how you can connect wireless gamepads to your computer and native consoles. The above methods will work on all consoles. First, the gamepad is registered on the device, and then you can control the game wirelessly.

    To avoid any problems, it is recommended to use only the latest drivers for gamepads and do not connect them to third party devices. Otherwise, the wireless joystick may not work. It is better to use a USB cable to bring the idea to life. Then any joysticks are easily connected to the computer!