entranceHow to install all the necessary drivers on your computer. How to install a driver for a laptop? How to install drivers from disk
Inoperability When you first connect, either a sudden termination of one of the available computer devices - webcams, printer, video cards, audioparticles, etc. - Can be caused by hardware failures of electronics or software problems.
Most often the second becomes the cause of the inoperability of this or that component of the PC. And this is due to malfunctions or full refusal of software devices - drivers. To restore the computer, you need to re-install the Windows drivers.
Consider two methods of installing / reinstalling drivers - standard (manual) and automatic (using specialized software).
Manual way to install drivers on a computer.
Process standard installation According to Windows, it is possible to divide into three stages:
- Collect technical information about the device and the operating system.
- Search for suitable software on the network.
- Installing the driver.
At each of these stages there is a possibility of difficulties, up to a violation of work or full failure operating system. But this can be avoided if you carefully follow further instructions. We will analyze each of the steps of the installation / reinstall drivers.
1. Collection of information. If you try to introduce into search engine Request like - "download driver to a webcam" - Thousands of sites will be displayed in the search results, each of which will be attended by as many links to load software. Our task is to find a driver suitable for the existing device and installed on the computer operating system. And for this you need to narrow the search, and here it is enough to clarify the device model and version of Windows.
For accurate definition Device models Perform the following steps (you can skip if the device information can be obtained from the documentation for it):
Launch system application "Device Manager". For this call context menu Over the "My Computer" icon or "This computer", click on the "Properties" item, and then by the "Device Manager" item.
A window will appear on the screen with the following contents:
First try to automatically search for drivers by clicking on the relevant item in this window. However, in most cases, this leads to the emergence of such a message: 
Nothing terrible - just the system does not seek drivers in custom folders, and does it exclusively in system directories. Specifically for this and was provided manual search Drivers. Run it by clicking on the "Perform driver search on this computer" item.
In the next window, in the "Search drives on this computer" section, click the Overview button and specify the folder where the driver files are saved in the unpacked form. 
Click the "Next" button to complete the installation. Further, you may need to restart the computer, after which the device must determine the system. Now consider the process of installing the driver by automatic way, for which we will use the modern DriverHub utility.
The program for installing drivers and subsequent updates.
DriverHub is a driver manager designed to install and update software from a wide list. computer devices. The program is completely free, suitable for computers under windows control 7 and above (32 and 64 bits).
Working with the program is very simple. Enough standard method Install and run the program. In the main application window, click on the "Find Now" button. 
Next, the program will scan the system, collect information about it and the devices installed on the computer. This usually takes 15-30 seconds.
When it comes to drivers for nVIDIA video cardsMost users can be divided into 2 categories - those who use drivers supplied with the operating system, and those that set the driver packages from the NVIDIA site.
Recently, the installation package drivers NVIDIA Seriously grown. Now it includes not only the necessary driver, but also many other components that may not even be required, depending on the purpose of the computer.
The default NVIDIA installer sets 3D VISION components, HD audio driver, software Physx and GeForce Experience. Even when the user disables the checkboxes corresponding to the additional components, some additional services and telemetry services will still be installed in the system.
Install only the driver for NVIDIA video card
Important! The instruction below allows you to install only graphic driver without unnecessary components. Make sure you do not require additional components to work before performing these actions.
Also note that the driver installation will still add components such as two NVIDIA Display Container LS and NVIDIA TELEMETRY CONTAINER services. After installation, you can disable or remove them.
1. Remove the old driver from the system
2. Load the newest driver NVIDIA
4. Install the driver in Windows
You need to open Device Manager Windows, since the driver installation will be carried out using the control panel applet. The easiest way to open devices manager - click windows key, dial hdwwiz.cpl And press the ENTER key.
Find your video card in the list of devices, right-click on it and select "Update Driver".
Then select the "Run Driver Search on this computer" option and select the driver folder.
In the end, you must receive a notification "Windows System has successfully updated the drivers." This means that the driver is installed and is used by the system.
Conclusion
If you want to install only the driver for the video card without additional components, then this instruction represents one of possible options. Also, a similar effect can be achieved by disconnecting the checkboxes in the NVIDIA installer and independently performing cleaning and disconnecting the components after installation.
Hello dear reader of my blog! The stable operation of the Windows operating system depends on how the driver for the device is installed correctly.
In this article, I will tell you how to install the driver for the device in the Windows operating system in several ways.
The driver is a program with which Windows operating system gets access to a specific computer device (video card, network card, printer, etc.).
I choose the model of its motherboard
I choose a folder where to save the driver and click "Save"
Next, the downloaded driver must be installed. The driver can be supplied as in the form of an executable file (for example: setup.exe) or as a folder with driver files without installation file. If downloaded drivers have installation fileThe problems will not establish it. Just run the executable file and follow the instructions on the screen. If you have a driver in the form of a folder with files without an installation file, then read the following installation method.
3. Installing the driver via Device Manager
If you have a driver for a specific device (on a hard disk or flash drive), but there is no installation file and you do not install this driver in the system, we do the following:
Open the "Start" menu, find the "Computer" icon, click on it right mouse button (hereinafter: PCM) and select properties ...
The system window will open, click on "Device Manager"
The device manager will open in which we see all installed in our system system. If you have a yellow exclamation mark near any device, it means for this devicesand the driver or driver is installed incorrectly installed. Click the PCM on a problematic device and choose "Properties"
We see in the properties of this device that drivers are not installed for it. Click "Refresh Driver ..."
Now we have a choice, or automatic driver search windows systemOr installing the driver manually. Select "Search and install drivers manually"
Indicate the system, in which place to search for drivers. To do this, click "Review"
and choose our folder with drivers. Click "OK"
We see that the driver is being installed for the device
When successfully installed, a window will appear that the installation of the drivers for this device is completed.
Click "Close" and see that our device (TV-tuner) disappeared a yellow exclamation mark. Driver installed!
If you are missing for this devices, you can choose " Automatic search Drivers. " In this case, Windows will try to find the driver for the device on this computer and on the Internet.
But this method does not always work, so it is better not to rely on it.
Note: This method Described for the operating systemWindows 7. If you have installedWindowsXP orWindows 8, actions will be similar.
4. Program to update driversDriverPack Solution
DriverPackSolution is a program for automatic installation, search and update drivers.
My most favorite and most versatile method of installing drivers. After downloading the version "Full" to the disk or flash drive, you can install the drivers on the computer, where there is no access to the Internet.
We go to the site: dRP.SU/RU/ . Click "Download".
Select the version "FULL" or "VIP". The version "FULL" can be downloaded for free, without registering torrent. What is torrent, I will tell in the following articles, so the blog. After pressing the "Download" button, download the torrent file version "Full" to your computer.
With the torrent client download the assembly of drivers to your computer
The downloaded ISO file (disk image) can be downloaded on the DVD 9GB Dvd and use. Below I will tell you how to do it.
If we decide to choose "VIP-status" click "Registration"
After that, a page with a login and password will be released, where you can register or log in using the previously created credentials.
After registering, you will be sent to the mail, where you need to confirm your address by clicking on the link ...
By confirming your account, you can click on "Download DriverPackSullion Configurator"
The status "VIP" can be obtained by doing certain actions to promote the DRP.SU/RU site. This is the passage of various quests, entry into the group in contact, exchange of links, friends invitations, etc. If you are ready to unwind their project for the sake of VIP status, please
Also on the site you can download the driver for laptops by clicking on the "For laptop" section and selecting your laptop model in the list
Now I will show how to use the automatic installation program and updating DriverPackSolution drivers by downloading the version "FULL" and writing this image on the DVD 9GB Dwarf.
Run the installation file from the disk. As a rule, it is DriverPackSullilation.exe. A program shell opens and collect information about devices and installed drivers on your computer or laptop.
After collecting devices, the program will show the drivers that are not installed in the system or that can be updated with new versions.
The figures in the figure indicate explanations:
- If you put a tick in the "Expert mode", the program will expand the list of drivers to the installation. I recommend putting a tick;
- Tick \u200b\u200bblock allocation of a specific driver. Here you can choose certain Drivers and click the "Install All" or "Update All" button;
- Buttons automatic intelligent driver installation. These buttons serve if you decide the drivers for the device to install one by one;
- "Install All" button or "Update All" (Depending on the situation, the button can change your name))
If you pressed the " Install and update all"The window appears with the choice of the necessary drivers and installation programs. Click "Start Installation"
After the drivers are installed, be sure to restart the computer.
All drivers for our devices are installed and updated!
5. Installing the driver usingMA.— config. com./ ru
Website ma-config.com/ru is designed to determine the configuration of your PC and search for the necessary drivers for your system.
We go to the site Ma-config.com/ru. and click "My drivers"
After the file is saved, it will automatically start and protes the remaining elements of the program
Then the program to update the drivers will begin to be installed. Choose the language and click "Good"
After installing the program, we go on their website and click "Refresh page"
Then we press "Start Analyze" again and see the right as the process of analyzing our equipment
Then opens new pageWe go to the bottom of the page and click "Find Drivers"
You will then see a new page with the list of drivers you want to install or update. In my case, only the driver is updated on my video card. Click "Download"
A new page opens with the driver description and the download button. Click on her
A new page will appear with the display of information about the downloaded file, its size and where you will download it. Click on the link to download the driver to your computer
6. Search driver byId Devices
It happens that not one of the ways we are not suitable or impossible due to certain circumstances. Then you can try to install the device driver using the equipment identification number (equipment ID).
To do this, go to the "Start" menu - right-click on the "Computer" icon - "Properties"
We find a device for which the driver is not installed (it is highlighted by a yellow question mark), click the PCM on it, select "Properties"
Now we go to the site devid.info. and insert from the buffer our ID equipment in the field "Enter driver code" (Press the "Ctrl" + "V" keys). Press the "Search" button. When successful search, at the bottom of the page will be shown information about the driver found. Press the pattern with a floppy diskette icon to save the driver to your computer.
Conclusion
Well, now you know how to install a driver for a device in several ways, including a program for updating drivers. From proper Installation The driver depends the stable operation of your operating system and your mood as a whole. All questions about how to install the driver you can set below in the comments.
Finally, you can watch the video, how to install drivers using DriverPack Solution
Well, in the next article I will tell you how to burn a DVD disk
Hello everybody! In this article I will show several ways to search and install drivers. We will install both manually and automatically using the program and using a conventional installer.
First I will show several ways to find necessary driver, and then several ways to install them.
How to install drivers on windows 7, 8, 10?
1 Method: Automatic driver search using the program.
The easiest way to automobile drivers and installations, these are specialized programs, with a large base. The most popular is, but lately I use, because There is nothing superfluous in it.
The first looks like this:
I usually put the left tick setup, an expert mode, put the checkboxes of the necessary drivers and install the button at the bottom. If you do wrong, then the program for installing drivers can establish too much)
If you need a driver and you do not need to install it, for example, you can easily on the driver or unpack the driver in the selected place, or find it on the Internet.
The second looks like this:
Everything is easier here. Select the driver checkbox and press the Install button.
If you just need the driver of this program, then you press the expert mode, unpack in ...
2 Method: Search for driver from the official site of the manufacturer.
The first way is good, but there is one thing but in it. You do not know where this driver comes from and that in it. 1% of 1000 causes blue screen. This is better not lazy, but download official Drivers. To do this, open Google! Not Yandex, but necessarily!
Now, if you are looking for a driver for a computer, then write the motherboard model, if for a laptop, then the full name of the model and also for phones, tablets, printers.
So, I will show on my motherboard. She has ASUS firms, model Z87-A. In the laptop, for example, look for a model on back coverunder the battery, on the device box, in the check)))
And if everything is not bad at all and you cannot find, then you can.
Also, you can try to find the driver here or here (you will need to download the program analyzer).
All, we downloaded the drivers, now try to install them correctly.
How to install the driver?
1 Method: Installation using the Auto Installation program.
As mentioned above automatic installation Drivers are possible in the following way:
I usually put the left tick setup, an expert mode, put the checkboxes of the necessary drivers and install the button at the bottom. If you do wrong, the program can establish too much)
In the second program, as mentioned above, it is possible to install this:
Select the driver checkbox and press the Install button.
2 Method: Using the driver installer.
This method is quite popular, because Does not require large skills. Just launch the installer downloaded by us and click Next, then, then, simply do not put a checkmark where you do not need it) Read carefully what you are offered.
3 way: manually.
Sometimes auto installers cannot pick up the driver, and sometimes the installer itself cannot install. It also happens that the driver is incompatible, and after the manual installation, everything works well.
To install the driver manually, press the right mouse button on the computer - click Control.
Click right-click on the device or unidentified device With an exclamation mark and click on it right-click and click Update Drivers.
Click to search for drivers on this computer (of course you can try the top item, but it will be relevant if the system finds the driver on the Internet).
If you find the right driver, then such a window will appear.
Another point. If you are sure that the driver is correct or correct, but for another operating system, and the driver is not installed, we select the item - select the driver from the list already installed drivers.
Press install from the disk.
Select a manually driver you downloaded. Only the driver you must unpack if it is in the archive.
That's all, so we answered the question how to install drivers on Windows! Following this methods, you can download and install absolutely any driver and install on an absolutely any operating system be Windows XP, 7, 8 or 10.
Good afternoon friends! Most recently, we wrote about how better. But what to do after setting up and installing OS? Does all of us work correctly? Today we will talk about installing drivers for Windows XP, 7. What is the driver and how to put it? Is it possible to do it yourself?
To someone, these questions will seem simple, but only the one who has been sitting on the Internet for hours, because after reinstalling the OS ceased the WEB-camera, or the drive with drivers for the video card has ceased. There are many situations, but together we will deal. We have prepared for you video lessons in which you will find answers to many questions related to the right and fast installation Drivers.
Installing Drivers on Windows
To begin with, I advise you to familiarize yourself with the driver and their destination. Where we also sanctified the interesting "alternative drivers" topics.
So, if we talk in simple, the driver is a firmware that ensures the interaction of the operating system with devices. As a rule, for each device there is a separate firmware. List of devices can be viewed in the device manager: "Start" -\u003e Right-click on the "My Computer" icon -\u003e In the menu that opens, select "Control" -\u003e and then select "Device Manager" in the left.
If you opened the "Device Manager" and you have a similar picture, then everything is fine. All devices work and drivers are installed for them. If problems arose in the device or the driver is not installed for it. It is marked with an exclamation mark.
Such an exclamation mark suggests that the device does not work, it is necessary to install or update the driver.
Install drivers automatically
With automatic everything is simple. We have a file with the "* .exe" extension, which activates the installation program. We launch it, and then follow the instructions of the installation program ( ordinary users At all stages, press the "Next" button). The installer itself will check the driver for compatibility with the system and the device and install it. After installation, simply restart the computer. Everything is extremely simple.
Below we offer you a video clip in which it describes in detail how and where you can download the driver and an example of an automatic installation is given.
Installing drivers in manual mode
Learn more in more detail on the manual installation method. Watch detailed video instructions.
Manual installation is used if the driver is not presented as a "* .exe" of the file, and in the form of a set of files with "* .inf" extensions, "* .sys" and "* .dll". Then you will have to perform the following steps:
- 1. Run the driver update for the device. (I click the right mouse button over the device name and in the menu that appears select "Update drivers").
- 2. The window will open in which you want to select "Run the driver search on this computer."
- 3. We check the place where the driver search will be implemented, if necessary, change (for this, click on the "Overview" button). Install a tick near the inscription "including invested folders." Press the "Next" button.
4. At the next stage, the system will search for drivers in the specified location and, if appropriate driver will be found, install it.
It is worth noting that the system is searching for a file with the "* .inf" extension, which stores all information about the driver files, its compatibility from the OS, information of devices for which you can install it, as well as the driver version and other technical information. Therefore, I advise you to immediately specify a directory driver to search for the driver in which the "* .inf" file is stored.
Friends, as you see, there is nothing difficult in installing drivers. We can all do ourselves.
In my opinion, it is better to figure it out, and make it yourself. It is so difficult. And if that, you have anyone to ask. We are always happy to help our readers. Write if it is difficult to install drivers on Windows.