Connecting router Asus RT N12. ASUS RT-N12 Router: Indicators and Connectors

In this article, we consider detailed information about setting up the router. ASUS RT-N12. But to not be mistaken with the choice of the router, hereyou can find detailed features, photos, comments, as well as various reviews.

In the following instructions, we will be able to quickly cope with all the upcoming work. You will be able to find out how to initially connect it, get to the item of its settings, select the Internet configuration correctly, rename Wi-Fi Router, assign your own password. Also, the link will also be presented if you go through, you can get to the firmware update site. IN general work It takes a little time, after a few minutes you will have your own Internet distribution center, which will be ready for use.

The characteristic and reviews on this router were presented above, but it is worth highlighting what such a router looks very elegant and even very attractive. What should be said about work, so this is what it works without failures and will always give you access to the Internet. This center distribution center is ideal for home use, as it will give you the opportunity to connect to you all your device to the Internet network. However, it happens that the devices are not connected, then 4 instruments can be connected on the cable at once.

Customize ASUS RT-N12 according to the scheme:

• Turning on the power and select the configuration item
• Select the correct configuration of the Internet distribution center through the automatic setup window.
• If you fail with the previous item, we will consider settings in manual
• Management of main router settings - name and password

Before setting up, we need to configure the router, but for this we need information about the types of connection of your provider. All this he must tell you who uses your provider. And also misses your data through the MAC address. If your provider calls such types as PPPOE, L2TP, or PPTP, then you need more more detailed information. For example: Names of users, IP address, password, and the like.

First, give meals the Internet distribution center. For proper connection A light bulb should be lit, saying that food is coming. If nothing caught fire and does not blink, then check on what word the button at the router is ON or OFF. Then you need to connect a cable from the provider or from your modem to the WAN connector. Then you need to connect the cable to connect your computer via the LAN connector. However, there are users who have no instrument that has a LAN connector and if you are one of these people, it will be possible to configure via Wi-Fi, but it is undesirable. After tuning through the LAN cable, it is not necessary for you and it can be pushed as unnecessary.

With a second variant in which you cannot connect on the LAN wire, you will need to connect your device by wireless network Wi-Fi. To do this, it is enough to turn on the router, and then in your device connect the wireless network. She will be called asus and will not have anyone password.

With desperate attempts, anyway nothing happens, then browse an article about connecting a laptop to Wi-Fi .

Sometimes it happens that someone has already chosen your router configuration. Then how your router will have some other name and some password. In such cases, it is recommended after connecting the router, immediately discharge all settings. To do this, it is enough to keep the button on rear case router 10 seconds. The drawing of this button was presented in the photo above. After 10 seconds, all the light bulbs stop burning, and the router reboot and everything will turn on again.

We go to the ASUS RT-N12 Control Panel

After successfully connecting your network to the network called ASUS or wired Internet network, you will need to open any of your browser and type such an address. 192.168.1.1. After downloading the address, your configurations must be displayed, but there are cases when this does not happen. You will be enough to view this. The photo below shows the configuration window. At the first stage you will need to press the button " To accept»

The step you are selected for the password, in order to protect all your data and configurations in the ASUS router. This item is mandatory. "VBE" password 2 times, remember, and for more security, write it down. As prompted by pressing the button " Further».

After taking your router to turn off, and then turn on again. After which it can be found in the list of all network available with his new name. Now you need to connect to your named router and a shovel router.

After connecting, return to the previous setting site. Now you should see the window with detailed information About your router. Now click " Further»

You must "fall out" the window, asking you to enter the names of the user, as well as its password. All of this you specified at the very beginning of the setting.

That's all. This type of setting is suitable for people who have a connection type " Automatic IP." If so, then the router all set up myself. Now you can use the Internet.

If your provider uses another connection type (it was written above), then your setting will look somewhat different than the above described.

Configure other connection types

Some providers do not use automatic IP connection technology and use PPPOE, PPTP, L2TP, or static IP. Then you need, after updating the connection data, specify the option of your connection. (You can find it from your provider).

Next "will fall out" the window with a request for a user and password. This information can be found from the contract concluded about the Internet connection, as well as from the provider. It can be enough for him and find out this information.

But this is if some of the types that require only these data are selected. There are types that require the IP address, the name of the service and the like.

You need to remember that you are the commander of all settings! You, depending on the need, you can choose your own settings. WAN.To do this, just go to the initial window setting and select Internet connection.

On the boot page, you occasionally choose the settings you want to configure you. If you followed all items and missed anything, then you should work everything. If so, then you can now safely use your wireless connection. Below will be information on how to change frequently changing configurations in the router.

How to change the name of the network and independently configure Wi-Fi

If you enacted you to change the name of your network, as well as the password submitted to it, then you can do it directly on the boot page of the settings through the configuration window. Just enter new variables and click the "Apply" button.

To choose, as well as edit, still large quantity Configurations need to press the item " Wireless network»

When you changed the name of the network and its password, reconnect your device. If attempts are vain, it will be enough to delete a network from the list "Known", and then connect to it again.

Security of all router settings

When hacking or with your desire to change the password and the name of the user in the safety of the router, go to the tab " Administrator", Further " System" After that you can edit all the data you need and Apply them.

After changing to log in, you will use the data you specified.

After reading this article, there are still problems or a desire for anything else with your router? Then you can read the next one to update the firmware. There is described all the same detailed instructions .

In this article we will talk about setting up the ASUS RT -N 12 router.

Step 1. Connecting a router to PC

Everything is as usual - in any of the yellow insert the patchcord (usually it comes in the kit), on the second end, connect with the corresponding PC connector or from which the settings will be performed.

In the blue WAN-port insert the connection cable to the Internet.

We turn the router and look at the default settings. We will need to learn: IP address connections, username and password.

On the computer in the network connection properties choose automatic receipt IP-Press.

Then go in any convenient browser and B. address line We write that the very IP address, which is written on the sticker from the bottom of the router.

To configure the router, go to the "Advanced Setting" menu.

The menu items are absolutely the same for the left and central window, so here you should proceed from personal preferences about convenience.

Step 3. Setting up a wireless network

Go to the "Wireless" submenu, the General tab.

In the SSID field, write the name of the wireless network, there is no need to hide it - put a tick to the "No" position for the "Hide SSID" field.

Since there are still quite a few devices that do not support N -standart, in the Wireless Mode field, we set the "AUTO" mode.

Channel width (Chanel Bandwidth), as a rule, is 20 MHz, but you can experiment by setting the width of 40 MHz.

Choose auto mode Channel broadcasting, "Chanel" - "AUTO".

Authentication Method - WPA2-PERSONAL, AES encryption type. In the WPA Pre-Shared Key field, we enter a password for accessing a wireless network.

Apply the entered Apply settings.

Go to the "WPS" submenu and turn off the corresponding mode by pressing the "Disable" button.

Step 4. Configure Internal (LAN) and External (WAN) Networks

We will proceed to configure the internal network. Go to the menu "LAN". Here, if necessary, you can change the IP address of the router.

Go to the "DHCP Server" tab.

By default, the DHCP server of the router is enabled - for the "Enable The DHCP Server?" Field It is worth "Yes".

The pool of addresses issued to customers can be cut to two dozen in the "IP Pool Ending Address" field in the end change "254" to "20".

Interesting! Configuration time for the IP address for the client 24 hours or 86400C ("Lease Time").

Apply "Apply" settings.

Let's go to the "WAN" menu, consider connection via the RPRO protocol. In the Wan Connection Type field, select RPRY.

As a rule, the RPRO connection implies the automatic receipt of the IP address, so in the "WAN IP Setting" section, in the "Get the Wan IP Automatically" field, we mark "YES".

The same for receiving the list of DNS-severnels provider "Connect to DNS Server Automatically "We celebrate" Yes ".

In the Account Setting section in the "User Name" and "Password" field, enter the username and password, which are written in the contract with the Internet provider. Click "Apply".

Go to the "Administration" menu, System tab. Change standard password "Admin" to another, more complex. Also in the "Time Zone" field, select your time zone.

Save the "Apply" settings.

If necessary, after setting up all parameters, you can save backup All settings.

To do this, go to the "Restore / Save / Upload Setting" tab and click the "Save" button, after which you select the place where the file will be saved.

To restore, you must click on the button "Select File" Select the settings file and click "Upload". To reset all settings to the factory, press the "Restore" button.

Router Asus. RT-N 12 is a standard device with medium characteristics that must be enough to meet the needs of users. The presented model is compatible with IPTV, but the IPTV setting on the ASUS router can be carried out only at the standard level: the port is allocated for this, but the traffic is not registered. Wi-Fi is fully supported by 802.11n, which, under ideal conditions, allows you to overclock the Internet up to 300 Mbps. But in reality, of course, the speed is at times lower, although it is enough.

So, how as ASUS? Let's figure it out.

Customize router

The IP address on the network for the presented device is the most common - 192.168.1.1. To see the web interface, you must drive the following to the browser string: http://192.168.1.1. It looks like this:

Figure 1. Interface

Name of the user and password Standard - Admin, Admin. After the first input, the "Setup Wizard" will be displayed. The tool is useful for beginners, as it allows you to set up a router in simple conditions. After pressing the "Next" button, there will be an attempt to automatically select the connection type. In case of failure, the device will give you a choice.

By setting up the ASUS RT router for Beeline, L2TP is selected, and for Rostelecom and other providers of this type - PPPoE. Click "Next".

Advanced setting

How to setup wiFi router ASUS RT NT12 independently without a program?
If the default is English, I change it:

Figure 2. Changing the Language Interface

The following will be presented for popular Russian providers at the moment.

These include:

• Rostelecom;
• House.ru;
• Beeline.

It is worth noting that the setting for the first three is the same type, since the technologies used are similar.

Configure PPPoE for Rostelecom

In the Advanced Settings section you need to select the "WAN" subsection:

Figure 3. Select WAN

Use the parameters given in this way:

1. View WAN - Connections - Select PPPoE;
2. Receiver digital television (IPTV STB parameter) - You should select exactly the port where the STB device is turned on;
3. UPNP - connect;
4. Receive an IP address in offline mode - enable;
5. DNS server - connect autonomous receipt;
6. Login - information indicated on the card or in the contract concluded with the provider;
7. Password - provided by the provider;

Other characteristics do not change. Click "Apply."

VPN L2TP on Beeline

How to set the ASUS RT N12 router to work with Beeline?

1. WAN - connection - L2TP;
2. Select the port - where the device is connected;
3. UPNP - enable;
4. Automatic receipt of WAN - turn on;
5. Autonomous DNS server - enable;
6. Login and password - the latter is issued by the provider, and the login serves the phone number directly;
7. L2TP server - resource tp.internet.beeline.ru.

Other features for Beeline do not change.

Open port

In the Advanced Settings section, we go to "WAN" and click on the Virtual Server Subsection:

Figure 4. Virtual server

Turn on the Virtual Server service, that is, we put "yes."

Fill in the service name string. You need to write a program name or application for which the port is opened accordingly.

The value "port range" fit the one that opens for the application. The same is indicated in the value of the local port.

In the line of the local IP address, enter the value of the nominal PC for which it will be registered.

Confirm and apply settings.

Configure Wi-Fi

WiFi setting is quite simple. How to configure? We go to the additional section. Settings and in the wireless network subsection.

Figure 5. Wi-Fi Setup

Step-by-step instructions In order to configure the ASUS RT N12 LX router to work with the wireless network:

• "SSID". In this field we write the name (identifier) \u200b\u200bof the network. It can be absolutely any;
• "Defense method." Select the "WPA2-Personal" parameter;
• "WPA preview key." A password from Wi-Fi is entered here. This can be both recorded and a cyphine combination. But the main rule is at least 8 characters.

After completing the Wi Fi settings, click the "Complete" button.

Reset

How to configure a WiFi router ASUS RT N12 to drop the settings? It is worth noting that this procedure is optional and is used if the user cannot connect to personal Account Due to hacking or intentional changing identification data.

Figure 6. Settings reset button

To reset the settings on the ASUS RT router, it is necessary that the router is connected to the power supply (anything happens).

The button is located inside the housing. The inscription is seen above it, which has a reset with ASUS (in the other models, everything is easier - reset).

Press the button is possible using toothpick, handle, etc. It is necessary to keep approximately 15 seconds. When the WPS button flashes, you can release and wait a couple of minutes so that the settings are reset.

Unfortunately, not every problem can solve the reset of the router settings, as the problems may not be associated with the program, but with physical damage, incorrect network parameters and many others.

Video clip with connection instructions

The video shows clearly and step by step and shows how to connect to the network, which settings are made and other necessary steps.

This article will be told about this inexpensive, but a rather powerful router from Asus, which is probably many users. On the this moment Models with revisions D1 received the greatest distribution, the firmware version of which 3.x. About them and will be discussed in this article.

How to connect router

To begin with, the user will need to choose a convenient place where the router would have been located close to the outlet, and was not constantly under the influence of high or low temperatures, while he should also provide good coating throughout the apartment. After such a place is found, you will need to install the router and connect to blue connector On the back of the cable from biline. In one of the remaining ports, you must connect the cable from the device from which the setting will be performed. After that, you can enable the device into the outlet.

Preset

After connecting the device, it is also necessary to carry out several manipulations:

• Connection that the user used earlier to access the Internet should be disabled and no longer use. After configuring the router will do everything yourself.
• The setting is best done from the device that will be connected through vitua couple . Through a wireless network, it is also possible, but a variety of malfunctions may occur.

Log in to the router settings

After switching on the device, several events options are possible. A similar window may appear, it may differ slightly if the user has already been in the router parameters.

Or, maybe nothing happen. Then the user will need to open any browser and enter into command line 192.168.1.1 . Then the router requested authorization data, you should enter admin / Admin. In both lines. All this data can be found on the sticker on the bottom of the device.

In the next window, the user will be offered edit standard data on your own. It should be done and remembering them, because without them it is impossible to get here and you will have to reset the settings.

After that, the router will try to automatically connect, and the user will be issued a window in which it is worth entering the name of the future wireless network and the password for it.

Configure Beeline Connection

Further the user will need go to the main menu. Its language can be changed in the upper right corner by simply selecting the desired list. In the same parameters you will have to choose the Internet.

The parameters of the connection itself, it is necessary to enter the same as depicted in the picture. Only username and password It will be necessary to replace your own.

Then it will only be closed on the button apply. After that, the connection must be established. If this did not happen, then it is worth checking whether the connection is broken on the computer itself.

How to set up wi-fi

Most of the settings, the user can enter when the router is first input. If you need to change something, you need to choose from the list Wireless network and edit the parameters there. You can change the name of the network and password, the encryption method is better to set WPA2-personal. Here you can also change the channel if it works bad on the current connection.

If you need to connect the TV console, then need settings can be found in paragraph The local network, in the IPTV section. All that will need to specify this port number through which the connection will occur.