Menu
Is free
check in
the main  /  Navigators / ROTER ASUS RT N56U how to determine the revision. High-performance dual-band wireless router ASUS RT-N56U

Router ASUS RT N56U How to Determine Revision. High-performance dual-band wireless router ASUS RT-N56U

In order to get to the web interface of the router, you must open your internet browser and in the address bar dial 192. 168.1.1, Username - admin. , Password - admin. (Provided that the router has factory settings, and its IP has not changed).

Setting up Wi-Fi on the router

In the router interface, you need to go to the left tab. Extra options Wireless network .

Set the parameters as follows:

  1. Field SSID: We enter the name of the wireless network. The value in this field can be not changed.
  2. Authentication method: WPA2-personal
  3. Encryption WPA: TKIP or AES.
  4. WPA preview key: You must enter any set of numbers, length from 8 to 63. They also need to be remembered so that you can specify them when connected to the network.
  5. Press below the button Apply

Connecting Internet Connection

In the router interface, select the left tab Extra options, in the opening list, choose Wan..

Configuring PPPOE Connection

  1. WAN Type: PPPoe
  2. Get the WAN IP address automatically: Yes
  3. Username: Your login under the contract
  4. Password: Your password under the contract
  5. MTU: 1472
  6. Save the settings button Apply.

Setting up L2TP connection

  1. Wan connection type - L2TP
  2. YES
  3. automatically - put the point on YES
  4. Username and password - login and password from the contract
  5. VPN server -
  6. The remaining parameters can be not changed. In the name of the host, enter anything in English. Save the settings.

Setting up PPTP (VPN) when automatically obtaining local IP addresses

  1. WAN Type: PPTP.
  2. Enable WAN, turn on NAT, enable UPNP - set everywhere YES
  3. Get the IP address and connect to DNS automatically - put the point on YES
  4. Username: Your login under the contract
  5. Password: Your password under the contract
  6. Enter the IP address or the name of the VPN server under the contract
  7. Save the settings button Apply.

Setting PPTP (VPN) with a static local IP address

  1. WAN Type: PPTP.
  2. Get the IP address and connect to DNS automatically - put the point on Not
  3. IP address: Drive your IP address under the contract
  4. Subnet mask: Drive a mask under the contract
  5. Main gate: Drive the gateway under the contract
  6. DNS Server 1: and DNS server 2: Enter your provider's servers (Rostelecom Omsk DNS 1: 195.162.32.5 DNS 2: 195.162.41.8)
  7. Username: Your login under the contract
  8. Password: Your password under the contract
  9. HEART-BEAT or PPTP / L2TP server (VPN): Enter the IP address or the name of the VPN server under the contract
  10. Save the settings button Apply.

NAT with automatic receipt of IP address (DHCP)

  1. WAN Type: Dynamic IP.
  2. Save the settings button Apply

Check the status of connecting to the Internet

Saving / restoring the router settings

After the setting, it is recommended to save them so that in the event of problems, it was possible to restore them. To do this, go to the tab Additional settings , Menu Administration, Restore / Save / Save / Download Settings.

  • To save the current router settings, click the button. Save. The settings file will be saved to the specified place on the hard disk.
  • To restore settings settings from the file, you must click the button select a file, specify the path to the file with the settings, then click the button Send.

Attention! Button press Restore will restore the factory settings!

ASUS RT-N56U It is a router with the ability to ensure computers and other devices through a network cable and WiFi. Having sufficient functionality, the ASUS RT-N56U can be used as a router for home networks and access points in office networks.

This Council will talk about step by step setting up asus RT-N56U..

In order to configure ASUS RT-N56U, It is enough to perform the following actions:

  1. Connect the computer to one of the LAN ports.
  2. Open the browser and enter in the address bar 192.168.1.1 (if you have not previously changed network settings).
  3. Enter the router configuration mode by entering the login and password (by default, both of these values \u200b\u200bare "admin").
  4. It is possible that the window will appear on the screen. fast settings The Internet in which you must click on "Go":
  5. Default, ASUS RT-N56U is configured to automatically receive network address from the provider or other network device On the network (DHCP is enabled). However, if you still have not connected the network wire in WAN, you will see the appropriate message and the ability to configure manually will be available. This item and choose:
  6. We specify the Admin user password, under which in the future we will set the RT N56U router. I advise you to come up with a password more complicated and, of course, write it down (in order to avoid forgetfulness loss):
  7. We leave the selected item "Wireless Router (Default)" and click on "Next":
  8. Few seconds:
    And the type of connection type will be available. At this step, you must choose exactly the type by which your device will be connected to the provider (or to the office network).
    In my case, the router must assign a static IP address that I performed by specifying it and the address of the DNS server:
  9. Next, you will be able to configure a wireless network (WiFi) in ASUS RT-N56U, which is the next step in your actions:
  10. Give the name to your device (it is Under the name you assigned, your router will appear in the list of available WiFi-Networks). I recommend changing the standard "ASUS" to any other of your desire. Also assign a password to be used to protect the router from unwanted guests who want to use your WiFi.

    By default, the WPA2-Personal AES encryption is used in this version of the firmware, which currently provides sufficient security (when prescribed is not too simple passwords) To protect against hacking devices:

  11. Check all the settings and, if everything is correct, then click on "Next":
  12. The router will be rebooted.
  13. Now, connect network cable To the WAN port and make sure that the Internet has become available for those computers that are connected to the LAN ports. Also check the presence of the appeared new network WiFi with previously chosen name and try to connect to it using the previously appointed password.

As you can see tune router Asus. RT-N56U. Not so difficult!

Setting up a Wi-Fi Router ASUS RT-N56U

The ASUS RT-N56U router allows you to connect up to 4 devices in the apartment using wired communication lines at a speed of up to 1000 Mbps, and also provides connection wireless devices With the speed of wireless data transmission up to 300 Mbps. Consider necessary settings This router to work in the "INSIS" network.

1. Connect the router to the PC on which the setting is made:

Connect the incoming "INSIS" cable to the White Port "WAN" on the router, then the patchcord must be connected to the network card of your PC with one of the four black ports on the router ("LAN 1-4"). In this case, the setting of the receipt of the IP address on the network card must be in the value automatically. You can find out more about the network settings on the PC Ethernet interface in the help section of the Network Instructions in Windows ... »:

2. Logging to the router setup interface:

To enter the router setting interface, you must open the browser ( Internet Explorer., Mozilla Firefox., Google Chrome., Opera, etc.) and enter the address http://192.168.1.1/. The default username is Admin, password - admin. If you can not go to the web interface, or the router was previously configured to use in other conditions, we recommend restoring the factory settings or check the network details on the PC. The factory settings on this router are restored by pressing the latent "Reset" button for 5 seconds, then the button must be released. After that, the indicators on the router will go out and will light up again, which will mean resetting current settings and restore default settings. PC settings must be set to "Get automatically". How to change the network settings on the PC Ethernet interface you can learn in the "Network Setup Instructions in Windows ...".

3. Updating firmware version:

If the router setup interface is made in a light blue tone, you need to update the version of the router firmware.

To do this, according to the link http://www.asus.com/ru/networking/rtn56u/helpdesk_download/ in the Software section you need to download last version The firmware for the router, then on the router interface you need to go to the "Administration-Firmware Upgrade" section to click "Browse", select the downloaded firmware file and click "Upload". Next, you must wait for the update (it will take about five minutes).

4. Change standard password on the router:

5. Setting up Internet access:

To configure access to the Internet in the "Internet - Connection" section, set the following parameters:

After that, you must click "Apply".

6. Setting up a Wi-Fi network:

To configure the Wi-Fi network, go to the "Wireless Network - General" section and set the following parameters:

7. Setting up IPTV:

If you are planning to watch IPTV, then on your router you will need to change some settings, since the original IPTV viewing features are blocked.

To begin with, go to the "Local Network - IPTV" section and make the following changes:

After that, click "Apply".

When watching IPTV software Wi-Fi settings You must change in the relevant section. We wrote about this in paragraph 6.

Also, the default configuration is configured to the bitrate of a multicast stream, for better broadcasting in the "Local System - Switch Control" section in the "Multicast Storm Control" and "Unknown MultiCast Storm Control" lines, you must set the value "0" and click "Apply".

8. Answers to ICMP requests:

To diagnose the quality of the connection when contacting the technical support service, you must allow your router to respond to ICMP requests. You can do this in the "Firemaar - General" section. You must select "Yes" in the "Resignation to Ping Requests from WAN" string and click "Apply".

9. Firmware update:

The settings produced are enough to enter the Internet, but for more stable and high-quality work it is recommended to update the version of the router microcontroller. This can be done in the "Administration - firmware update" section. You must either click "Check" and when the firmware is detected, click "Apply", or by reference http://www.asus.com/ru/networking/rtn56u/helpdesk_download/ in the Software section Download the latest firmware version, Select it by clicking "Select File" and click "Send". After that, the version of the microcontroller will be updated.

Data settings are enough to comfort work on the Internet. If you have any questions, you can always contact the round-the-clock technical support by phone 8-800-755-05-55.

The router is suitable for tariffs to - Mbit / s with a VPN connection of the PPTP protocol, the LAN connection /\u003e Wi-Fi speed depends very much on foreign interference and is determined in the specific cases separately ./\u003e Wi-Fi data transfer rate (wireless) differ from LAN connection. Details.

Change TCP / IP protocol settings network card At the computer, on the automatic receipt of the IP address and DNS server values \u200b\u200b(DNS) on automatic (DHCP) link . Then you need to enable the router power adapter in the electrical outlet.

1 . Connect the device to the computer with a wire that is supplied, in the "LAN" port one of four.

2 . Connect the Internet (laid from the corridor) to "Internet". To the characteristic mechanical click

3 . You open the IE browser and dial in the address line 192.168.1.1. It may take advantage of TCP / IP settings in automatically obtaining IP addresses and DNS Server (DHCP). Connecting wireless communication to a device or an attempt to open settings through any other Internet browser can not always be successfullink .

If you suggest the use of remote access to the router (router), we strongly do not recommend leaving the default password "Admin" .

7 . Fill the lines:

IP address: (Your IP address from the contract)
Subnet mask: (Your mask from the contract)
Main gate: (Your gateway from the contract)
DNS Servers: 217.78.176.1 217.78.177.250 (DNS servers from the contract)
Username: (Agreement number with "/" fraction)
password: (From the contract, by default password for statistics)
PPTP parameter Set : Without encryption
VPN server: vpn.koptevo.net.

For tariffs with limiting traffic " VPN server": lvpn.koptevo.net (first letter - English little "El") .

8 . Click "Apply" and wait until the router settings are formed.

SSID: The name of your wireless network (absolutely recommended not to leave the default network name). The register matters if the connection on the receiving device is entered into manual. Network name strongly recommend entering only on English language And without "special" characters.
Channel: Auto
Method of authentication: WPA-AUTO-PERSONAL
Encryption WPA:TKIP + AES.
WPA preview key: The security key of your network (no less than 8 characters, only English letters, register of letters matters)

This router holds two broadcasting ranges, 2.4 gigarets and 5 gigahertz. The range is configured separately, to change another range, you must select from the menu in the "Frequency Range" item.

Names of 2.4 Gigarez and 5 Gigahertz need to be specified different, and the password can be left the same.

And in the field "Multicast Data Speed \u200b\u200b(Mbps)" Select 24

To become available local network resources need to include static routes Enable statistical routes - Yes. And add all routes one by one.

IP address of the network or host 10.0.0.0 Network mask 255.0.0.0 Gateway
IP address of the network or host 172.16.0.0 Network mask255.240.0.0 Gateway
IP address of the network or host 192.168.0.0 Network mask255.255.0.0 Gateway
IP address of the network or host 79.98.136.0 Network mask255.255.248.0 Gateway
IP address of the network or host 217.78.180.0 Network mask255.255.254.0 Gateway
IP address of the network or host 217.78.176.0 Network mask255.255.252.0 Gateway

where - be sure to referred to the contract. (main gate).

Do not forget to put in the column Metrics - 1 . And in the grade Interface Choose Man.. Click ( + ) in the column ( Add / Delete.).

Vivania! When the new route blank is delivered, the Interface field automatically jumps on LAN.

Additional setting (if necessary) "UDP proxy (UDProxy)" exhibit the value of 7781



Wireless routers owners know that this device rarely falls on his eyes. The user purchases the device in the store, connects it at home and adjusts it. That's all, then the router can not be touched by months. The main thing is to hide it away, because the type of these devices is sometimes frightened. We chose for today's review ASUS. RT-N56U precisely because it does not look like appearance on other similar devices. It can even be put on a computer table next to the monitor and keyboard, it will not be ashamed for this deed.

Yes, glanced in the user's manual, we realized that specifications Here at the level of other top wireless routers. A pair of Wi-Fi points that can work simultaneously in the range of 5 and 2.4 GHz. This feature immediately leads to the conclusion that the device would be very useful to owners of network players, which reproduce media out from the local network, or work with streaming video from the Internet. You just need to translate your player into a separate network and it will download movies through a separate throughput channel, without interfering to sit on the network from a laptop, desktop computer or even smartphone.

Description of the router ASUS RT-N56U

External antennas at the ASUS RT-N56U router is not, only this fact improves appearance Device. But it is worth noting that usually such an innovation affects the quality and reliability of the connection. The developers understood this and introduced five internal antennas at once, plus they embedded the AI \u200b\u200bRadar technology. This technology is engaged in focusing the antennas signal towards client devices. This, according to the manufacturer, in fact, check this fact is very difficult. But we will try to come up with testing.

All two access points work with IEEE 802.11n protocol, ports for cable network have a Gigabit Ethernet standard. All for high speed. Inside even there hardware acceleration NAT, which will optionally accelerate data transmission up to 1 Gbit / s. From the "iron" inside the router there is a cry random access memory 128 MB, also intended to accelerate speed.

For connecting drives and office equipment, only a pair of USB ports version 2.0 is intended. A little bit, but in some models, only one USB port is embedded. Format hDD, connected to the ASUS RT-N56U, can be in any file System. There is support for even small-scale EXT2 and EXT3 systems. But the size of the volume is a limitation. But it is 2 TB, to which few people still decide to get.

The router looks very beautiful. It has not been to see such routers for a long time. The ASUS RT-N56U case is designed so that most often the user's eyes open only the front panel. And the various connectors and buttons are hidden behind a decent protrusion. It can be seen that ASUS designers can do their job.

On the front panel we again encounter glossy plastic, as in many current devices. But here it is diluted with a wavy checkered texture. And you agree, it is better to use gloss on routers to which you touch very rarely than on laptops. Cells are made beautifully, on the sunlight they begin to move different colors. Blue LEDs inform about the work of various networks and USB ports, they shine weakly and do not distract at themselves. Moreover, the LEDs are located in such a way that they are completely not visible.

Asus rarely saves the assembly materials of its devices. Here we see just the case is not rare, everything performed high quality and the router is very pleasant to the touch. But we did not like the stand, the router is very fragile on it. It is worth only to hurt - it swings, we generally silently silent. Alas, but it is impossible to do without a stand, in this case it is not additional device, and the thing is the first importance. On the router itself there are no holes for mounting or any rubber legs.

Everything electronic components The ASUS RT-N56U router is located under a massive metal screen. Without dismissal, find out what the processor is almost impossible. On the pCB There is a soldering, it is made at the highest level.

Go to the settings of the ASUS RT-N56U router

Going to the device interface, we found that the router setting is clear enough. Each item is provided with a context prompt, which will love newcomers in this case. The menu movement is quickly, the pages open almost instantly, the settings are saved for a short time. The interface contains a percentage indicator that is filled with long operations. Restarting the device is performed fast enough. In general, there are no complaints to speed the interface of the router.

Well, we have connected ASUS RT-N56U to the computer, discovered branded utility from the disk and jumped into the web interface of the device by clicking on standard IP Address 192.168.1.1. Note, you can go through this IP address via the browser, the utility itself has identified the router on the network. There is Russian among the interface languages. Factory password and login to enter Admin / Admin.


address bar Browser, copy and enter http://192.168.1.1. And you enter the router interface

On the main page We found a home network diagram connected to it devotably shown.


ASUS RT-N56U web interface. The main. Click "Go"

For security, change the Admin password to the one that invent.

You can connect to the Internet with a convenient step by step wizard. It's almost impossible to make a mistake in the connection settings with this wizard. And if wrong - the wizard will quickly show you the problem.

Now you can choose any node of this circuit and configure the selected device.


ASUS RT-N56U web interface. Section "Internet Settings" Select "Wireless Router" \u003e\u003e\u003e Click "Next"

It is worth noting, the master does not have the ability to register static routes between the house network (if the Internet access takes place with its help) and local devices. Here you need to prescribe everything yourself.


WAN-connection is also configured manually configured. ASUS RT-N56U can be made to work as a router to successfully connect the links of the local network, and you can leave it in the form of a regular point. access Wi-Fi. The program contains pre-installed modes of operation, everything will be fine here.

A firewall is inserted into the router, it is engaged in filtering traffic between global and local networks, focusing on numbers IP addresses and ports. The firewall, if necessary, can overlap the login on the MAC address or URL of the remote server.

The QoS function is present in the ASUS RT-N56U router. It allows the user to optimize traffic for various tasks. For example, for online games, or for a built-in file server. The setting can be carried out automatically, but you can climb the parameter items yourself. Traffic data is saved within 24 hours, they can be viewed on a clear monitor. Using the view, you can understand where the traffic is most of all, and where - less.

This router is good for those who have home networkto which required remote access. Or those who have a home server with Internet sites. For such people, there are currently required programs and settings, as well as the Dynamic DNS function, which IT Review has already mentioned in one of the previous reviews.

Wide functionality of router

File server You can create almighty, for this, the widest functionality is provided here. Of course, it was not without restrictions, they mainly come from bandwidth uSB ports 2.0. By connecting the drive, we found it in the Windows network environment. Also to the data on the hard disk you can access via FTP. In this case, you can create several accounts for different users With various access rights for them. Network players I. gaming consoles You can connect via UPNP protocol. The DDNS client and the file server configures quite easily, for this again a step-by-step master called Aidisk.

Download manager

Also in ASUS RT-N56U there is a download manager that supports downloads from torrents. This utility just starts loading, and then it continues in full offline mode. Also on the disk with software Found special utility To create a virtual USB port. It is intended for those who connect to one of the two ports printer, scanner or MFP. Please note all programs are designed for Windows, the version for alternative operating systems on the disk did not find it.

For wireless access points You can also configure great amount parameters. The simplest is to use WPA, WPA2 or WEP standards for greater security. Well, to the most difficult, such as configuration of the WDS function. With it, you can with using wi-fi Without the use of cables, create a single local network.

What remains to mention? Additional functions. But there is nothing particularly unusual. All configuration can be exported and imported. There is a detailed log, which is divided into several sections. Let's better go to a small testing.

To measure performance, we used a pair of computers with Wi-Fi cards of maximum bandwidth and gigabit network adapters. Computers management took place under the operating windows system XP. It is unlikely that "Semyon" would change something radically. For testing, an iXChariot program was used, which can automatically transmit hundreds of files one megabyte each. Devices we have been placed in direct visibility, the distance between them was approximately one and a half meters.

Network switch

ASUS RT-N56U showed itself in best of sight As a cable network switch. It all depends on the speed in the cable network itself and the bandwidth of the network adapter. But most of all it became interesting to us whether it is possible to reach a speed of 1 Gbit / s when data transmitted between two devices. But we did not think about the fact that the test stand itself does not allow to achieve this speed of read / write. But it is worth noting that the performance of the device does not affect the network. Just do not forget to turn on NAT, the routing is exactly twice as slower without it.

Most of all struck the work of wireless access points. ASUS RT-N56U Here on the head above many similar devices with external antennas and designed for full work in iEEE standard standard 802.11n. If you have a good network adapterYou will not feel the difference between data transfer via Wi-Fi and download data through a 100 megabit cable network.

Conclusion

Summarizing, we can say that ASUS RT-N56U is both a very stylish and functional device. Settings are simple and understandable, bandwidth Very great even compared to many routers in a similar price segment. Disadvantages There are only in the physical building of the body, the developers abandoned the introduction of holes for fasteners on the wall, which would be very convenient. Otherwise, this wireless router will suit anyone. If you are planning to buy a simple and cheap router now, we advise you to think about buying in a couple of months more expensive ASUS RT-N56U. Yes, you will spend more moneybut but replacement this device No long years will need.