Virtual machine Bitrix 5. Why is it important not to postpone the installation and configuration of CMS Bitrix based on "1C-Bitrix: Virtual Machine

With the help of special VM solutions, you can quickly get an optimally configured server that is not inferior in performance to BitrixVM, and in scalability - superior to the 1C-Bitrix virtual machine. The packages have been prepared by Bitrix specialists and are available for download and use.

1. "1C-Bitrix: Virtual Machine 7.3.4"

"1C-Bitrix: Virtual Machine 7.3.4" is specially configured for fast execution software products"1C-Bitrix": unfolds in minutes and is immediately ready to work! You can not only install trial versions of 1C-Bitrix products on a virtual machine, but also transfer your own ready-made projects.

2. "1C-Bitrix: Web Environment" - Linux

"1C-Bitrix": Web Environment "- Linux is used for quick and easy installation of all software necessary for operation of 1C-Bitrix products and solutions on Linux platforms CentOS 6 (i386, x86_64) and CentOS 7 (x86_64).

3. Virtuozzo Application Template for running an optimized VPS "Bitrix"

Virtuozzo VZ Application Template for Bitrix using 1C-Bitrix: Web Environment - Linux 2.0. The template is designed to install (create) Virtuozzo containers based on CentOS 6 (i386, x86_64) and CentOS 7 (x86_64) packaged as a Virtuozzo EZ Template.

Installing packages requires administration skills! Receive Additional information you can visit the Developer Support Center by contacting the community on the

About the product

About the product

1C-Bitrix: Virtual Machine is specially configured for fast execution of 1C-Bitrix software products: it unfolds in minutes and is immediately ready to work! You can not only install trial versions of 1C-Bitrix products on a virtual machine, but also transfer your own ready-made projects. Moreover, you can run several sites on one virtual machine through the wizard.

Web Cluster-Enabled Virtual Machine

The virtual machine includes a wizard for creating a cluster, a wizard for adding a slave server, a wizard for switching a slave server to master mode. Now it takes 5-10 minutes to deploy a cluster. There is no need to install or configure anything.

You can appreciate the benefits of virtual machines right now, even if you have never used them. Download a fully operational virtual machine. Launch it and see how fast Bitrix products work under a properly configured virtual server.

Download and use for free!
Rent at the price of the hosting plan

"1C-Bitrix: Virtual Machine" is implemented using VMware virtualization technologies and can be used in any VMware cloud computing solutions.

How to try it?

There are two ways to test a virtual machine in operation:

• independently download and run the installation file on your computer (free of charge);
• rent a virtual machine of hosters (at the price of the hosting plan).

"1C-Bitrix: Virtual Machine" is a non-commercial product. In this case, you can contact 1C-Bitrix for help if there are problems with the functioning of our commercial products (1C-Bitrix: Site Management, 1C-Bitrix: Corporate Portal and) on BitrixVM. But other issues, for example, on changing the BitrixVM configuration, are resolved only by the developer community.

The composition of the product

"1C-Bitrix: Virtual Machine" emulates the operation of a real computer. The product includes a configured operating system, web server, database, firewall, mail server, as well as a large number of settings that affect the reliability, performance and security of a web project. On the Virtual Machine, you can run new project, or transfer a ready-made website to it. Website transfer is possible directly from the server to the machine.

The virtual server contains:

• Operating system - CentOS 7.5 with automatic updates
• Two-tier configuration - NGINX + Apache2
• MySQL5 with InnoDB support
• HTTPS support
• Cluster Configuration and Add Additional Sites Wizards
• Sphinx Search Server Configuration Wizard
• Additional packages: geoip, catdoc, poopler, mc, man, strace, sphinx
• configured firewall (iptables) and verified configuration security
• The IP address is obtained by DHCP or set manually
• easily customizable mail client(msmtp)
• minimum requirements from memory - 512M
• maximum disk space 100 GB
• auto-optimization of performance for different amounts of memory (up to 16 GB)
• console panel of typical actions for managing a virtual server
• a large number of settings on which reliability, performance and safety depend
• Root password - bitrix (a change is required at the first login)
• Bitrix password - bitrix (a change is required at the first login)

About virtual machines

Virtual machine technology is gaining popularity. The market leader is VMWare, Microsoft is actively developing with Hyper-V, Citrix with XEN.

From Wikipedia:

What's new?

Version history BitrixEnv and BitrixVM

The product "1C-Bitrix: Virtual Machine" is constantly being improved and refined. Stay tuned for changes and new features of the Virtual Machine on this page.

Changes in version 7.3.4

Software Update:

• push-server 2.0.0

Major fixes:

• The push-server package has been updated to work correctly on CentOS 7.6. Fixed error starting push-server service via systemd.

Changes in version 7.3.3

Major fixes:

• Added automatic inclusion of PHP zip and dom extensions. They have become mandatory since they are required for the documentgenerator module to work.

Changes in version 7.3.2

Major fixes:

• Added the ability to enable and disable the yum repository that stores beta versions of virtual machine packages.
• Fixed a typo in the menu phrase, due to which the restoration of the default certificate for the site did not work.

Changes in version 7.3.1

Software Update:

• push-server 2.0.0

Major fixes:

• Fixed display of MySQL and PHP update items if MySQL server version 5.5 and PHP is updated to 7.0.
• Added copying of the certificate chain when configuring your own ssl certificate.
• Generation of dhparam has been made easier.
• Fixed blocking of the menu when the configuration script is running.
• Fixed exit from the menu for several items.
• Fixed menu behavior when monitoring is enabled.

Changes in version 7.3.0

Software Update:

• nginx 1.14.0
• hostname 1.0.0
• php 7.1

Major fixes:

• Added use of php version 7.1 by default.
• Fixed setting of certificates with configured https access to the site.
• Corrections on package settings (option in dbconn.php and ethtool dependencies).

Changes in version 7.2.2

Major fixes:

• Fixed a bug with duplicating ntlm settings for the httpd-scale service.

Changes in version 7.2.1

Major fixes:

• Fixed an error that occurred when creating a website with advanced parameters.
• Fixed a phrase in the mail settings for the site.

Changes in version 7.2.0

Software Update:

nginx 1.12.2

Major fixes:

• Added support for installing certificates: native and Let "s Encrypt.
• Added the ability to return the "default" ssl site certificate.
• Fixed errors in configuring the web cluster.
• Added the ability to change the hostname after creating a server pool.
• The procedure for updating the settings of MySQL servers in the pool has been fixed.
• Security fixes for nginx and httpd config files.
• Fixed errors in creating sites if there is not a single working site on the server.
• Added removal of servers from monitoring when they are removed from the server pool.

Changes in version 7.1.0

Software Update:

• nginx 1.12
• mysql 5.7
• nodejs push-server 1.0.0

Major fixes:

• New version of mysql server. Added update wizard to menu for existing installations.
• Added the ability to configure a new push-server.
• Fixed bug with lsyncd server configuration
• Fixed the procedure for updating a machine in a pool, added the ability to start a full update from the menu
• Fixed security for nginx config files
• Added X-Frame-Options option for online chats
• Fixed starting smtp service

Changes in version 7.0.1

• Added the proxy_ignore_client_abort option when creating new sites; a separate menu item for configuring existing sites was added.
• Added settings for fast file serving via nginx for external storage: Clodo, Rackspace, Google Storage and Selectel.
• Added generation of DH parameters for ssl connection.
• Fixed configuration of lsyncd service for Cent OS 6.
• The procedure for generating the name for the index has been changed.
• Fixed error with monitoring settings in the system.
• Fixed error with configuring mysql service after stopping it in the system.
• Fixed the error of changing when changing the password for the mysql service.
• Fixed the error getting the status of the mysql service for a localized version of the OS.
• Fixed the procedure for changing the password for hosts without installed / configured sites.

Changes in version 7.0.0

• CentOS 7 (x86_64) becomes the main distribution kit for Bitrix Virtual Machine 7.0. Images work under CentOS 7 (x86_64), rpm packages are still available on CentOS 6 (i386, x86_64).
• Software Update:
  • nginx up to version 1.10.2
  • sphinx 2.2.11
  • php 7.0
  • ansible 2.2
• Fixed scripts for the virtual machine to work with Ansible 2.2. The ansible package is now shipped through the Bitrix repository.
• The procedure for generating passwords in the car has been fixed, support for specials has been added. characters.
• Added procedure automatic creation password for the mysql service at the first start of the machine and when installing via bitrix-env.sh.
• PHP 7.0 is used by default. Added the ability to rollback to PHP 5.6 if needed. When upgrading a virtual machine from 5.1 to 7.0 in the same menu item, you can perform the upgrade procedure from PHP 5.6 to 7.0.
• Added the ability to create custom rules for iptables / firewalld.
• Fixed errors in the menu in the case of several IP addresses on one network interface.
• The procedure for configuring a web cluster is divided into two steps that can be started separately from each other: data synchronization and setting up the web environment.
• Lsyncd is used by default as a data synchronization service.
• Fixed errors in case of deleting a machine from the server pool.

Changes in version 5.1.8

Fixed scripts of the virtual machine to work with Anaible 2.1.0.

Changes in version 5.1.7

Software update: nginx - 1.8.1

Changes in version 5.1.6

• ANSIBLE: Support for working with ansible 2.0.1
• Description: Fixed scripts of the virtual machine to work with Anaible 2.0.1

Changes in version 5.1.5

A number of changes have been made to improve the performance of the Bitrix Virtual Machine product.

Changes in version 5.1.4

• Added deletion of the pool configuration, for cases when it is necessary to recreate it.
• Added the ability to remove servers from the pool that are offline or unavailable for one reason or another.
• Added the ability to upgrade PHP to version 5.6.
• Added the ability to set the authorization method when configuring mail.
• Added the ability to set cron settings or hits for the site during its creation.
• Added the ability to configure email notifications for the Nagios monitoring system.
• Added the ability to set a personal login and password for Nagios and Munin monitoring systems.

Changes in version 5.1.3

Now, when adding a server to AD, you can specify an arbitrary NETBIOS name other than the machine name.

Bugs fixed:

• connecting the server to a domain with localized group names;
• creation of incorrect configuration files for the samba server;
• impossibility of changing the domain for the server;
• creation of sites in cp1251 encoding;
• creating an invalid link in case of an https request.

Change in version 5.1.2

When creating mail for the site, the msmtp profile is registered for the crown. In this way, the configured mail for the site starts working if the job is transferred to the crowns.

Changes in version 5.1.1

1. Changed behavior of disabling php modules via config files... Avoids including "unwanted" php modules when updating php packages.
2. Added the ability to set the root password by creating the /root.my.cnf file when updating the mysql server.

Changes in version 5.1.0

Major changes

1. Added the ability to configure the delivery of the composite cache through nginx, if it is configured on the site
2. Software Update:

• php - 5.4
• mysql - 5.5
• nginx - 1.6.2

Support for external kernels (ext_kernel) for sites
For this type of site:

• no web access
• you can use them to create a link
• all cluster functions are supported (mysql, web)

Removed dependency of creation of memcached and sphinx roles from cluster and searchd modules installed on sites. In the absence of a module on the site, a service will be added. But at the same time, it will not be registered in the corresponding site model.

Added restrictions on creating a cluster configuration (mysql, web) in the following cases:

• if there is more than one site of type kernel (kernel) or external kernel (ext_kernel) on the server
• cluster or scale module not installed

Updating ntlm (fixing errors for synchronizing calendars, contacts; added the ability to update the configuration of several sites if NTLM is already configured for the server)

Added HVM images (Frankfurt and not only)

Changes in version 5.0

New:

• Added work with dynamic addresses (updating the list of servers in the pool, if the address is updated on one of the servers in the pool, access settings and access configuration are changed). Wiki article
• Changed work with sites:
• added a definition of whether the scale and / or cluster module is installed on the site, for such sites site operations are allowed: setting email, enabling / disabling https-only mode, setting Reserve copy, but such sites do not participate in cluster operations: memcached, mysql, apache
• in case of an error on one of the installed sites installed on the server, such a site will not participate in any of the operations in the cluster, the list of such sites and their errors can be viewed in paragraph 6, subparagraph 8
• API for hosters

Fixes:

• Working with subinterfaces, in previous version were not detected correctly, which did not allow working in OpenVZ / Virtuozzo containers
• An incorrect determination of the mode in which the server is operating (behind a balancer or without) led to the following errors:
• website creation on port 8080
• enabling HTTPS-ONLY mode did not work
• links to the https version of the site were created incorrectly
• Domain names were used in the nginx server configs (allow / deny rules), if the user specified the FQDN when creating the master or adding a new server to the pool, which led to service restart errors

Changes in version 4.3:

• changed the settings of the nginx-push-stream-module, added the ability to work via websoket and standard ports 80, 443
• reworked configuration files, added comments
• fixed loss of get parameters in dav
• updated module nginx-push-stream-module, nginx, apc
• added sphinx configuration and connection wizard
• autoscaling options expanded to 16GB

Changes in version 4.2:

• changed the settings of the nginx-push-stream-module to correctly support push & pull
• php json module is enabled by default
• fixed rpm package when updating
• fixed setting in cron of the task of checking the rights of munin and nagios
• fixed rules for processing merged css by nginx
• added rules for processing merged js by nginx
• the correct nginx response headers are set when displaying custom errors
• fixed definition of variables in nginx
• fixed library dependencies in BitrixVM

Changes in version 4.1:

• CentOS updated to version 6.3
• fixed wizard for adding additional sites
• fixed backup setup wizard, archive format made compatible with restore.php
• improved service for setting parameters of the bvat system
• 404 error handling for static content moved to nginx
• nginx fixed 404 error handling for dynamic content
• added error pages to nginx
• nginx added correct processing of calendars
• to support the push & pull module, nginx is built with the nginx-push-stream-module
• fixed mechanism for working with html cache "Bitrix" in nginx
• added system update wizard
• changes to improve system security

Changes in version 4.0:

• operating system CentOS 6.2 i386
• removed a number of VMWare components that caused problems after virtual machine updates
• standard virtual machine disk size increased to 10 GB
• ZendServer replaced with Apache and APC
• changed the connection scheme of Nginx and Apache configuration files to minimize problems when updating or installing additional packages
• ntlm authorization mechanism changed and BitrixEnv4 package added to rpm
• added wizards for creating a backup copy of a site on a schedule, deleting settings for additional sites, setting up system monitoring (munin, nagios)
• changes aimed at improving the security of the system
• the wizard for creating additional sites has been improved
• corrected the work of the service for setting parameters of the bvat system
• added version control system mercurial

Changes in version 3.1:

• updated version of nginx 1.1.0, with patch upstream_keepalive
• expanded set of preinstalled packages (htop, samba, etc.)
• ntlm authorization setup wizard

Changes in version 3.0:

• operating system CentOS 6.0 i386
• ext4 filesystem
• updated version of nginx 1.0.6, configuration changes
• updated version of msmtp 1.4.24, changes in the configuration wizard
• replacing xpdf with poppler
• fixes to mysql config
• the set of pre-installed packages has been expanded in the virtual machine (mc, strace, man, etc.)
• added the ability to create additional sites, both on a separate core and within the framework of multisite
• added masters: creating a master node of the cluster, adding a slave node to the cluster, changing the role of a slave node to master
• updated GeoIP databases

Major changes in version 2.0:

• php-5.3.3 or php-5.2 (version of php-5.3.3 lacks Zend Guard Loader component, i.e. encoded files will not work);
• changed PHP parameters for optimal performance Bitrix products
• added xdebug module (not active by default, to activate it, just uncomment the corresponding line in php.ini and restart apache);
• updated version of nginx 0.7.67, configuration changes;
• expanded list of OSs for installing Fedora 8-14 (i386 only), server CentOS / RHEL / OEL 5 (i386 and x86_64);
• disabling duplicate compression in the product configuration (now only nginx compresses data);
• elimination of msmtp mail program configuration problems;
• disabled auto-update of packages (via yum) when restarting the server;
• fixed minor notes and errors.

Packages tested on Fedora 8,12,14 (i386), CentOS / OEL 5 (i386 / x86_64). Fedora 14 has minor OS bug issues.

Changes in version 1.6:

• By default, the VM site is now accessible over both HTTP and HTTPS, and the Zend Server control panel has been disabled to save resources. Both of these options are still well managed through the root user menu.
• Added support for the SMTP server that appeared in Bitrix: Corporate Portal 9.0, which, if configured correctly, starts automatically.
• After updating the product, a search in PDF files becomes available.
• Updated all software packages, including Zend-Server-CE (very seriously updated), added php-5.2-memcache module to use in-memory caching.
• Changes have been made to the NGINX configuration for processing cached PHP pages (HTML caching technology), errors in processing WebDAV requests have been fixed, and scalability has been improved. Fixed errors in the APACHE configuration, which caused, in particular, errors when "classic" uploading pictures to the photo gallery (via java-applet). Added processing of document types docx, xlsx, pptx.
• Improved start script bitrixsetup, added localizations for English and German.

Changes in version 1.5

• updated all Ubuntu 8.0.4 OS packages, as well as Zend Serevr CE 4.0.3, PHP 5.2.10 application packages;
• improved nginx configuration in terms of compression;
• changes in the console menu: when the Zend panel is disabled, the corresponding service is stopped, which saves the RAM of the Virtual Machine;
• system improvements in the use of RAM: The virtual machine runs satisfactorily on 160 MB of RAM, although the main recommendation for the size of RAM remains the same - 256 MB of RAM;
• updated bitrixsetup.php - allows you to install additional applications"1C-Bitrix".

Changes in the new version 1.4

Added installation using BitrixSetup.

Changes in version 1.3

The new edition of VMBitrix is ​​implemented according to the VMware Virtual Appliance standard!

General configuration:

• the home directory of the bitrix user is separated from the webroot;
• before the initial login via ssh / console to change the default password (bitrix), you cannot connect via SFTP and HTTPS to manage the server. This does not affect the launch of bitrix_setup and the installation of the product;
• removed EULA.

Error correction:

• fixed test SSL certificate;
• console menu: fixed error in mail configuration, removed menu items for configuring IP - this is in VMware tools;
• nginx config: fixed WebDAV errors (you need to upgrade to 8.0.2 to work properly), 400 Bad Request on creation new topic, synchronization with Outlook;
• fixed bug when launching XMPP.

Applications:

• additional packages are installed: catdoc, memcached, xpdf;
• reworked and fixed the bitrix_setup script;
• updated nginx to version 0.7.62 (security bug - Critical vulnerability in the Nginx http server);
• modified script for auto-tuning service parameters to ensure high performance with RAM values ​​up to 2 GB;
• changes were made to the distributions of Bitrix products, necessary for the correct operation of the VM.

Advantages

Advantages

"1C-Bitrix: Virtual Machine" is an excellent solution to the problem of high-quality hosting and dedicated servers setup. Usually, in order to achieve high project performance, you need to independently configure the server software, OS, hardware. It is also important to ensure safety. And in "1C-Bitrix: Virtual Machine" all these settings have already been made. As a result, you save time and money on the deployment and configuration of the server, on the purchase of the necessary equipment, on the security of the project.

Everything is ready to go!

The virtual server is ready for immediate use. This means that 1C-Bitrix products will work quickly on the server, and most of the services and services here are not just configured, but work perfectly.

After installing the virtual machine:

• you can use the wizard for configuring the cluster and adding additional sites;
• the menu allows you to configure sending mail through an external SMTP server;
• if you configure an SMTP gateway, mail can be routed within the organization;
• the instant messaging server (XMPP / JABBER server) is configured and running (automatically starts);
• Miranda, QIP and other messenger programs can be configured to work with the Internet / Intranet portal;
• adjusted the indexing of office documents;
• WebDAV is configured and running;
• HTTPS support for the Corporate Portal;
• SSL support for XMPP

Saving

There are significant savings for the company:

• on deployment time;
• on equipment;
• on the operating cost.

Rent

The product "1C-Bitrix: Virtual Machine" can be rented from hosting providers. Virtual machine rental is available in any virtualization technologies: VMware, Parallels Virtuozzo Containers, Amazon EC2 (AMI), Open VZ, Citrix.

Greetings Friends!

In this video tutorial, we will talk about how to work with a local site on 1C-Bitrix as comfortable as possible so that nothing slows down. And for this we will use the BitrixVM virtual machine.

Why is there such a need - to install a virtual machine under Windows to work with the site? Yes, because when working with 1C-Bitrix or another CMS using local servers such as Denwer, OpenServer, XAMMP, etc. there are often a bunch of problems:

1. If the computer is slow, if HDD old, if the system has been working for a long time and is clogged, then working with the site is sometimes problematic - everything slows down. This is especially true for engines with a large number of files such as 1C-Bitrix, Magento, etc.

2. Very often these local servers have a very poorly configured MySQL connection by default (especially in Denver). And it turns out that if a site works powerfully through heavy AJAX or has a complex structure based on dynamic information that is selected by many requests to MySQL (for example, a Joomla site that has many modules and plugins installed for various additional functions), then everything is again starts to toss and turn slowly. And this is the extra nerves of the developer.

3. The main problem of local servers when using them with complex projects is that there are no standard or just common modules for PHP or apache, or a stripped-down version of MySQL that does not support the necessary features that will be needed on a real project server. Of course, you can try to configure all this on these local servers, but not everything is possible, or it works with such glitches that development becomes extremely difficult.

All these problems are solved by development on a production server (immediately on hosting), but this is also not always possible, either for security reasons, or for some other reasons. Not everyone can make their own separate server for projects on Linux, since you need to have the skills to install and administer such servers.

What is the way out? And he is simple - use virtual server , which has already been optimally tuned for us by specialists and which works in full free programs right in the familiar Windows. And this virtual server solves all these problems, and at the same time it also teaches us to work with projects remotely, as if they were really on real hosting.

You get a real Linux server for your project(for Bitrix, it is now made on CentOS 6.5), everything is done there as on a real hosting, there you can install the necessary packages as on a real dedicated server, and there the speed of work is like on a hosting. And all this on your computer under Windows control You do not need to know how to install Linux, you do not need to be able to optimize a web server, you do not need to make complex settings, I will show in detail the entire process of installing and starting such a server in just 30 minutes in this video:

That's all for today! Do not forget to click on the social buttons on the left and ask your questions a little lower in the comments!

Comments (21):

• Alex

  Good evening, Dmitry!

  I can't find the answer to the launch of the virtual player, I've already re-read everything I can and watched the video several times and I can't figure out where the error lies. In fact, when creating a new password for root, everything goes fine, until the moment when you need to enter a new password. Here at least you drive in numbers, at least letters, an entry appears, then the password is bad, then it still gives out some kind of nonsense. Of course, after several unsuccessful attempts, it again throws on data entry. Maybe you met with such nonsense?

• Denis

• tehfoxen

  • It is not very clear what kind of file you are requesting. First, an error is generated not for the absence of a file, but for a syntax error in the request. At the same time, when clicking on the link, we can only receive information on the license, which does not exist.

    • tehfoxen

      We tried different installations: 1. Installation from the cloud (with a license key), this error appears above.

      3. Installing their archive uploaded to LAN (error, not all packages, although all are downloaded)

      4. We uploaded the entire archive to the server root and tried to unload from there, but also an error (not the entire archive).

      The error occurs after the unloading option is selected and then gives an error.

• Anton

  Dmitry, good afternoon!

  Please tell me, did you have any problems with SFTP connection to VM5?

  I did everything on video, changed passwords, for example, accesses:

  NAT is enabled in the machine settings

  But I can't connect to WinSCP, I keep writing Access denied.

  although in the virtual machine itself I connect normally with this login and password, I don’t understand what’s the matter ...

1C-Bitrix: Virtual Machine "was developed directly for the needs of projects on" 1C-Bitrix ". The indisputable advantage of this software product is its initial configuration, which is a sample ideal settings virtual server for Bitrix. 1C-Bitrix: Virtual Machine has been tested and configured to work with both 1C-Bitrix products and any PHP applications.

What is a Virtual Machine for?

Using "1C-Bitrix: Virtual Machine" will allow your projects to show consistently high performance indicators. In addition to the simplicity and convenience of work, it allows you to significantly reduce the time for administering a site created on the basis of "1C-Bitrix" products and setting up a server, as well as on equipment. With the help of "1C-Bitrix: Virtual Machine" you can create both a new project and transfer an existing one.

Full access at the administrator level, it allows using a virtual machine for 1C-Bitrix to install any software and make changes to the settings of the BitrixVM virtual server.

Which version is being installed?

You get the most new version programs. To date, the latest version of this software product is "1C-Bitrix: virtual machine 7.0" with the latest PHP version, which gives a tangible increase in productivity.

How do I order a virtual machine?

For all our customers, the 1C-Bitrix virtual machine is provided free of charge when ordering any VPS server for CMS Bitrix and is ready to work immediately after deployment, which takes a few minutes.

How do I pay for VPS?

To pay for VPS, select the desired tariff in the table and click the "Order" button. Then follow the instructions in the billing panel, indicating the necessary actions with the domain, your data and select the appropriate payment method. That's all! Your server will be activated immediately after payment.

- free software product, ready for immediate use virtual server, fully configured, tested and adapted for optimal operation both with Bitrix products and with any PHP applications.

Virtual machine will save you time and effort on correct deployment and administration your website or internal information resource based on Bitrix products.

Product "1C-Bitrix: Virtual Machine" distributed free of charge.

About the product

"1C-Bitrix: Virtual Machine" specially configured for fast execution of 1C-Bitrix software products: unfolds in minutes and is immediately ready to go! You can not only install trial versions of 1C-Bitrix products on a virtual machine, but also transfer your own ready-made projects.

You can appreciate the benefits of virtual machines right now, even if you have never used them. Download completely ready to work virtual machine... Launch it and see how fast Bitrix products work under a properly configured virtual server.

The virtual machine is free to download and use!

It is implemented using VMware virtualization technologies and can be used in any VMware cloud computing solutions.

The composition of the product

"1C-Bitrix: Virtual Machine" emulates the work of a real computer. The product includes a configured operating system, web server, database, firewall, mail server, as well as a large number of settings that affect the reliability, performance and security of a web project. On the Virtual Machine, you can start a new project, or transfer an already prepared site to it. Website transfer is possible directly from the server to the machine.

The virtual server contains:

• Operating system - Ubuntu 8.04 with automatic update
• Two-tier configuration - NGINX + Zend Server CE
• MySQL5 with InnoDB support
• HTTPS support
• Additional software: mc
• Additional packages: geoip, catdoc, xpdf
• configured firewall and verified security configuration
• The IP address is obtained by DHCP or set manually
• custom mail server
• highly customizable mail client (msmtp)
• minimum memory requirements - 256M
• maximum disk space 60 GB
• auto-optimization of performance for different memory sizes
• panel of typical actions for remote control under the bitrix user
• remote control server via https
• a large number of settings on which reliability, performance and safety depend
• Root password - bitrix (a change is required at the first login)
• Bitrix password - bitrix (a change is required at the first login)

Advantages

"1C-Bitrix: Virtual Machine"- an excellent solution to the problem of high-quality hosting and dedicated servers setup. Usually, in order to achieve high project performance, you need to independently configure the server software, OS, hardware. It is also important to ensure safety. And in "1C-Bitrix: Virtual Machine" all of these settings have already been made. As a result, you save time and money on the deployment and configuration of the server, on the purchase of the necessary equipment, on the security of the project.

Everything is ready to go!

The virtual server is ready for immediate use. This means that 1C-Bitrix products will work quickly on the server, and most of the services and services here are not just configured, but work perfectly.

After installing the virtual machine:

• the menu allows you to customize sending mail through an external SMTP server;
• if you configure an SMTP gateway, mail can be routed within the organization;
• the instant messaging server (XMPP / JABBER server) is configured and running (automatically starts);
• Miranda, QIP and other messenger programs can be configured to work with the Internet / Intranet portal;
• adjusted the indexing of office documents;
• set up and running WebDAV;
• HTTPS support for the Corporate Portal;
• SSL support for XMPP.

Saving

Significant savings for the company are evident:

• on deployment time;
• on equipment;
• on the operating cost.