Full access to Windows 7 disk. The error correction "denied access to the disk

How to be if when trying to open in windows Environment section internal disk or external information carrier The system issues a notification " Access denied"? Usually, such a notification appears if interference with the security parameters was carried out in the disk properties. Or with an incorrect definition of the system of the current user as a disc owner, which happens when the carrier is periodically connected to multiple computers. How to solve this problem?

So when trying to open external device Information or separate disk partition in Windows Explorer see access to access.

In this case, in the properties of such an NTFS disk as file system It is determined, but there is no information about busy and free volume.

If there is no important data on the disk or, it is possible, it is empty, you need to go to the Windows disc management utility and either format it or delete the section and create anew.

If there are valuable data on the disk, they are necessary to remove them before formatting or removing the partition and convert somewhere. How to extract?

1. Total Commander.

Invisible conductor disc can see third-party file manager. For example, Total Commander.. We try to access data and copy them to another, visible section or media system.

2. Full access to the disk

If there is no third-party file manager in the system, or an attempt to solve a problem with his participation was not crowned with success, you must configure full access to the disk. In its properties, go to the Security tab. Click "Advanced."

At the top where the "owner" is indicated (or in the "Owner" tab for Windows 7), click "Change".

In an empty field, enter the value "all" (without quotes and with a capital letter), click "Check the names". The "All" value is highlighted by the lower inscription, then click "OK".

Then click "Yes."

Now copy the data.

3. Paragon Hard Disk Manager

Another way to get to the contents of the disk to which Windows refuses access - Paragon program Hard Disk Manager. On board there is a file manager with which you can view and export the contents of not only physical disks, but also virtual files hard disks In terms of their mounting by means of the program itself from Paragon. At the same time, not only NTFS is supported, but also a number of other file systems as: FAT16, FAT32, EXT2 / 3/4, Refs. And this means that the Paragon program may help us even if the system gives a notification when opening a disk the system is notified due to the fact that the file system is not recognized. Plus, the procedure for exporting a large amount of data will be faster than when using Windows copying tools.

Instruction

First, try to change the owner of a specific local disk. Turn on the computer and log in to the operating system. To do this, use any account entitled to administrator rights. Open windows Explorer (Menu "My Computer").

Find the icon of the local disk to which you cannot access. Click on it right-click and select "Properties". After starting the new settings menu, open the Safety tab.

Press the "Advanced" button located at the bottom of the menu. Open the "Owner" item. Explore current parameters Access K. disk. Click the Edit button.

Now select the "Administrators" group with the left mouse button. It should include an account for which you open access. Activate the option "Replace the owner of sub-connecters and objects" by putting a tick in the right place. Click "Apply".

Confirm the launch of the replacement process of the local disk owner. Restart the computer after executing the actions described. Alternately, open each folder located in the root directory of the local disk. Confirm the change in the access parameters to the specified folders.

Try to change the owner of a non-system partition. hard disk with help command line. Open the Start menu. Enter a search string cMD command And press ENTER. Naturally, the manipulation data must be carried out using the administrator account.

After opening the console, enter the TAKEOWN / F D: / R / D Y command. In this example, access is shown for a local disk D. If you need to change the permissions for another partition, enter the corresponding letter. Now enter the ICACLS D: / GRANT: R Username: F / T command. Instead of the word UserName, write the name of your account.

Among the users of computers, it is quite often a problem of accessing one or another resources - folders, intranet files and other diverse objects. In this article we will tell about one of the ways to access those or other objects within the local computer and to control these objects at your own request.

Instruction

To access the change in some registry sections, click on the registry subsection with the right mouse button and select "Permissions".

Under the list and groups, click the Add button and enter the name of your account to the window that appears. Click OK, and then in the previous window, select your account in the list and in the Lower section, set the checkboxes at all points under the word "Allow". This will give you full access to the required data.

Video on the topic

Can happen so that when trying to open folder There is news about the refusal, that is, access is prohibited. This often happens after reinstalling the program. In such cases, even administrator rights do not help. Any information can be restored. At the same time you just need to make several consecutive operations.

You will need

• Personal Computer

Instruction

In order to get into folder And get the necessary, open the ability to view the rights settings. To do this go to "My". Select "Service". Open the "Folder Properties" item. Then on the "View" tab, remove a tick from the point "Use simple general access (recommended). " Click OK. Find you interestingly folder, And right-click on it. In the window that opens, click "General Access and Security ...". Select the Safety tab. If a window with information appears, click OK. Go to "Security" and click "Advanced".

If for some reason the window did not appear or did not open, then restart the computer. Press the "F2", "F3" or "F8" key. Select "Safe Mode". Then you can perform the following operations. Select the "Owner" tab, and click once to the ADMIN account from the list. Put the checkbox "Replace the owner" at the bottom and press "OK". A window will appear in which we agree with all the parameters. Close the "OK" buttons all windows. Try to open your interest. folder. Delete permissions to and change each specific folder.

If you are lost access to the folder, use the Power Data Recovery program. This allows you to restore the data. Load it to your computer. In order to restore the required folder, Click "Restore". If all this does not help, then use the following way. Need LiveCD. Write down on it folderwhich you can not open. Load it with. Information will be available again. Pope Save to another place and under the other name. Everything is done very simple.

Video on the topic

Open access To tough disks, printers, files and computer folders to other users local network You can, opening the network access to these resources. You will also need to put the rights of users for each of them.

Instruction

Call service menu necessary disc The right mouse button on its icon and select "Properties".

Apply the checkbox on the "Open Common access access and Safety "and specify the network name of your disc displayed in the" Network Surroundings "folder in the" Shared Resource "field.

Apply the checkbox on the "Allow changing file changing over the network" to resolve the full accessand to your disc. In this case, other users will be able to create, delete, move and rename file objects on the selected disk.

Uncheck the box on the "Allow File Change" field over the network "to be able to access the selected disk only in reading mode.

Click OK to apply the changes made. Drive to which was allowed accesswill be displayed in the My Computer folder in the form of an open palm icon.

Select one of the disks of your computer and create a folder with any name to which will be allowed. access From the local network.

Call context menu Created by clicking on the right mouse button and go to "Properties".

Click the "Access" tab and apply the checkbox on the Open Common field access To this folder "in the section" Network joint access».

Enter the selected folder name in the Network Resource field. The name may be arbitrary, the local and network name folder may vary.

Apply the checkbox on the "Allow changing file changing on the network" to provide full accessand to the selected folder.

Uncheck the check box on the "Allow changing file changing network" to exhibit the read-only mode.

Click OK to confirm the execution of the command.

Helpful advice

Sources:

• Windows electronic encyclopedia

Makes sense to open access to hard disks in computer network Any company to speed up the manufacturing process. To any user to provide the right to dispose of any computer network, you must set the address of its computer in the access protocol. How to make a local disc open to local network users?

Instruction

Enter the Start button menu. Select "My Computer". In principle, you can do it double-click On the "My Computer" icon, which is located in the upper left corner of your desktop. The window opens. Select a local disk in it, access to which you want to open. Click on it right-click, select "Properties" in the menu that appears. A window will appear before you.

Select the "Access" tab. In it, find and select "If you want to open access to the root disk folder, click here." Check the box in front of the "Open access to this folder" item. You will find it in the "Network Joint Access and Security" section. Then specify the network name of the local disk, which will be displayed on the local network as a shared resource.

Check the box in front of the "Allow File Network" item to open access to the local disk. After that, other network users will be able to freely dispose of information that is stored on it.

To prevent different kinds of unpleasant moments associated with erroneous correction of information, remove the box next to the "Allow change file changing" item so that the information of the selected local disk is available for other users only in read mode.

Apply Changes. To do this, click OK. If you do everything correctly, the disc selected for shared access will be displayed in the "My Computer" window in the form of an open palm icon.

To open access to some separate folder, and not a disk as a whole, do everything in accordance with the instructions described above. If you want to allow access to only some users, then specify their addresses on the network so that only they have the right to view the documents on the open local disk.

One of the most common problems after reinstalling the operating system is the lack of access to files and user folders of the previous operating system. Often users resorted to the installation additional programs To solve this problem, it can be solved much easier.

Instruction

Open the "folder properties" in the control panel. In the specification of the specification, select the "Use simple files" item in the list. Remove the checkbox from it, if any, apply changes and click OK. If the system is offered to restart the computer, perform this action.

Right-click on the folder in which you cannot get. Select "Sharing and Security" and go to the Safety tab. You will appear on the screen a new window with a warning that you cannot change the settings of the parameters of this folder, the system will propose to change the owner - agree and click OK.

In the open and accessible now for you the "Security" tab, click the "Advanced" button. You will have a new window with several tabs, go to the one called "Owner". Press once on the corresponding icon in the list to activate the administrator account. Check the checkbox below the inscription "Replace the owner of the subconteiners", click "OK". If the Safety Tab has not been found, download the system in safe modeBy clicking when you turn on the computer, the F8 key and selecting the desired item.

Close everything open windows In turn by pressing the "OK" button. Try to open the folder to which you have not had access before. In the properties of the security and access of the folder in the user selection window or user group, press the "Advanced" button in the lower left corner and then Search.

Select the user you need, check the ticks according to the actions permitted it. Apply the changes, close the window in turn and again Check access to the folder you are interested in. If you did not disrupt the sequence, the directory should be opened without any problems.

Video on the topic

Helpful advice

Do not install two identical operating systems on one computer.

Sources:

• how to go to the folder from the user

The closure (finalization) of the data disk must be performed in cases where you are not going to further make it any other files on it. The disc closing feature is present in almost all disk recording programs.

You will need

• Program for recording discs, such as Nero or CD Burner XP.

Problem: Unable to access a network resource. Network folder is displayed ...

but when you try to enter the login, the system issues a message:

Windows cannot access \\\\ computer \\ network_resurs. Permission to access \\\\ computer \\ network_resurs absent. Contact your network administrator to gain access.

In operating room windows system XP The same message sounds like this:

No access to K. \\\\ computer \\ network_resurs. Perhaps you have no right to use this network resource. Contact your administrator to obtain appropriate access rights. Access denied

Why is there no access to a network resource?

The reason may be in the following factors:

• the user has no permission to access a shared resource.
  These rights are configured on the tab. Access and are relevant only to configure access over the network.
• the user has no permission to access the NTFS rights level
  Configured on the tab Safety. This setting adjusts access rights in both the network and local.
• the user has no permissions for network access, nor NTFS rights.

How to open access to the network folder for all users

Settings must be performed on the computer where the network resource is located.

We go into computer management:

Open section Common folders . Select subsection Shared resources And find out the local path to the folder, which is open to the network.
In our example, we see that the network resource temp. Matches the local path C: \\ temp :

We find a local folder, press on it right mouse button and call Properties:

1 first thing to check is network access permissions. Open the tab Access and press the button Extended setting:

Press the button Permissions:

Check for whom it is open network access, and also verify rights.
In order to enter a network resource, all users could list Resolution for shared resourceyou need to add a group Everything.
In our case, the full access for the group will separated Everything. So, with network permissions, everything is in order:

2 Second, what to check is NTFS rights. We go to the tab Safety And check global permissions to access the folder.
In our example, we see that only users and local computer administrators can see and enter this folder. This means that if we try to enter the network resource for the user who has no account on local computerWe will be denied access.

In order to enable access to the folder to all users, not even with an account on the local computer, you must add the same group to the list. Everything. To do this, press the button Change:

Click Add:

Add a group Everything and click OK..

Attention! Looking a group in the list of groups and users is not necessary. You can simply write the word "all" with your hands - necessarily with a capital letter.

Many modern mobile PCs have long been not built-in CD / DVD drives. The need for them very quickly disappeared with the appearance of the possibility of downloading from USB and large on the volume of flash drives. But if you still have to use CD / DVD discs, that is, the ability to take advantage of the rospace over the network optical driveThereby, possibly bypassing the external drive.

In order to be able to use the rostered CD / DVD drive, both computers must be in one local network, and also requires the use of advanced sharing configuration in Windows.

Providing overall access to the device

To start on the local computer, go to the menu "My Computer" menu.

Right-click on the device you're going to sink go to the "Shared Access" menu - "Extended Common Access Setting".

Click on the "Advanced Settings" button to appear with the optional parameters.

In the next window, check the box next to "Open Share Access to this folder", dial the description for a rostered resource, for example "CD Drive" and click on the "Permissions" button.

Make sure that the user group under the name "All" has the rights to read this device. In the event that you need additional security (if the computer is not for example in a closed home networkHere, here you can add certain users. Thereby defining who can contact this drive. Click OK If you performed the access rights settings.

It is also possible to disable common access password protection that makes access to the device itself much easier. But it is advisable to perform only in the case of a closed home network. To disable password protection, go to the "Network and Shared Access Center" link that is at the bottom of the window.

Click on the "Home or Worker" header, scroll down and set the "Disable password with password protection" parameter to disable passing protection. Next, simply click "Save Changes".

At the end, after you click on the OK button, your drive will be available from the network. You will see its address under the "Network Path" heading in the properties window.

The drive icon will change the display displaying that it is provided. To remove the access device, you must return to the enhanced access menu and remove the checkbox next to the "open access to this folder" inscription.

Disk display

On your mobile computer Open Windows Explorer and click on the "Network" tab to see all the computers of your network.

Go to remote computer With a confused drive, with a button, but the device, select from the "Connect Network Disk" menu.

You can choose any free drive letter for a polecated drive, which will automatically connect it each time the computer is turned on (if all the necessary conditions are certainly sustained: you are on the network and the remote drive is available in it).

The connected device will be displayed in the My Computer window with your chosen disc. Now the remote network drive is available for you or your programs as usual.

Of course there are others third-party applicationsthat implement this opportunity, but in this case, to solve this task, enough standard funds.

Tweet

When opening, deleting or other manipulations with files and folders, you may encounter file access error. I will tell you how to deal with it and why it happens.

How to get full access to files and folders

First, instructions on how to get full access to folders and files. The next chapter will have an explanation for curious.

Open the folder where there is a problem file or folder. To get full access to their content, you need to configure access to files:

1. Press the right mouse button on a locked file (or folder) without access - Properties -select the tab Safety:

2. Press the button Optional -select the tab Owner:

3. Press the button Change and choose the name of your user (in my case it Dima, You will have another), also put a daw on Replace the owner of subspeters and objects:

4. If the text window appears with the text "You do not have permission to read the contents of the folder. Want to replace permissions for this folder so as to have full access rights? ", I answer Yes:

5. After changing the owner of the folder, a window will appear with the text "You just became the owner of this object. You need to close and re-open the properties window of this object to see or change permissions. " Press OK., then press again OK. (in the window Extra options Security).

6. In the window Properties - Safety Press again Additionally, Only now we look at the first tab of the opening window - Permissions.Need to click the button Change permissions:

7. Press the button Add:

(If you work with properties folders, not the file, mark the check box "Replace all permits subsidiary on permissions inherited from this object. ")

8. In the window that opens, "Select: Users or Groups" You will need to enter your username (you can watch it in the Start menu - the name will be the most upper line), click the button Check names, then OK.:

If you need a folder (or file) opened without restrictions absolutely all users. not only yours, then press again Add and enter the name " Everything"No quotes (" All "in English-speaking windows version), then click Check names and OK..

9. On the tab Permissions Press twice on line with usernames twice and put a checkbox to the "Full Access" item:

This will automatically deliver the tank at the points below.

10. Then press OK, In the next window, answer the warning Yes, again OKTo close all windows.

Ready! Full access to files and folders received! You can safely open them, change and produce other actions with them.

Output: You need to take two steps: become the "owner" of a file or folder (p. 3), then assign yourself an access rights (clause 6). In many instructions on how to get full access to files and folders, only the first step is mentioned, forgetting about the second. This is not entirely right, because the security settings of the file / folder can be different, it is necessary to bring them to a normal form, and not just becoming the "owner".

Why do you need rights to files and folders

The disarming mechanism of access to files and folders is necessary for many reasons. For example:

1. Restricting access to information by different users.

If on one computer or in shared network It works several (more than one) users, logically limit access to information - one users are available all information (most often these are administrators), others - only their own files and folders (regular users).

For example, at home you can make the right limit of the rights of one user so as to protect important files and folders from removal (so that the child cannot delete important documents by ignorance), while from another (parent profile) could do anything.

In the first chapter, I showed how allow Access to specific users. Similarly, you can and limit access - steps the same, only in paragraph 9 It is necessary to put other ticks.

2. Safety of the operating system.

In Windows XP, all arranged quite primitive - users with administrator rights can change (and delete) any folders and files on the hard disk, including systemic, i.e. Windows owned. In fact, any program running in the administrator profile could have done with content hard disk anything. For example, delete the boot.ini file, because of which Windows will stop loading.

Under the rights of a limited user, where thanks to the configurations of insoles, it was impossible to delete important system files, few people sat preferring the administrator account. Thus, an account with administrator rights in Windows XP creates the most favorable conditions for viruses.

IN Windows Vista.The Windows 7 and Windows 8 runs "User Account Control" (short UAC): When working in the administrator account, the program launched by the user work with limited rights. That is, delete or change system files of the program can not. Programs are able to get more complete access by requesting it from the user using the UAC window, about which I already:

If file access rights are configured correctly and the UAC is included, the viruses running in the Vista / 7/8 administrator account cannot seriously harm the system without the permission of a person sitting at the computer.

UAC useless In cases:

1. If a user is sitting at the computer, mindlessly pressing buttons "Yes" and "OK"

2. If you run the programs "on behalf of the administrator" (right-click on the program shortcut - run on behalf of the administrator).

3. UAC is disabled.

4. for system files And folders on the hard disk allowed full access to all users.

Programs running in a limited account windows User. Vista / 7/8 (Type "Normal Access") cannot call the UAC window and work with administrator rights, which is quite logical.

I repeat again: when there is no possibility to increase your rights to administrator, it is impossible to harm the operational system files protected by limiting the rights of access rights.

Causes and solving problems with access to files

The problem is that you are trying to access files and folders created under another account. Solutions two: either allow all Users access, or allow only those who need to list them. Both solutions are easily implemented according to the instructions above. The only difference is that you will be entered in paragraph 8 - the word "all" or listed users.

By the way, you can allow access to everyone, but to prohibit one (several) users, while the prohibition setting will be a priority for the listed users.

The causes of problems with access to files are set. Most often they appear if you have several accounts, several operating systems or computers - everywhere accounts Different, when creating files and folders, the right is also assigned different.

That with the rights of files and folders can not be done

In no case do not assign full access files and folders on the entire hard disk with the operating system installed!

There is a myth that operating system Limits the user's access to its files, so you need to assign access rights to all files on the disk. It is not true and change the rights of all files it is impossible! In the system in which they did not "pick up", did not appoint the rights of access manually, everything is appointed correctly!

Use my instruction only in the case of rebeling problems, not to prevent far-finished.

I explain: resolving access to system files, Windows will still work, that's just any virus or incorrectly working program can make very bad things. You are unlikely to need problems.

Your security settings have folders "C: \\ Windows", "C: \\ Program Files", "C: \\ Program Files (x86)", "C: \\ Users", "C: \\ System Volume Information", "C: \\ ProgramData, "C: \\ Recovery" and many others. It is impossible to change them, with the exception of cases, if you need to make any manipulations with files (for example, to change windows theme), And you need to return the settings back.

Do not change the security settings "just so", making the system defenseless in front of viruses and failures! After windows installations The rights of access to system folders are set correctly, you do not need to change them!

Tip: If the program works cruel only if it is running "on behalf of the administrator", with normal starting, issuing errors - try assigning full rights to change the folder with it in "C: \\ Program Files" or "C: \\ Program Files (x86) "(Not the Program Files folder itself, and the folder with the desired program inside her!).

Very often it helps run old games on Windows Vista / 7/8/10, which store the settings files, save inside your folder. Being running without rights to change your own files, such games at best can not save game progress, at worst - close or do not start at all. With old programs the same.

conclusions

1. Assign access rights is relatively easy.

2. The access rights to change without reasonable goal is impossible.

3. Change the rights of system files - change them back. To change rights systemic Folders and files on the previous one, you can use this instruction (Method for Windows Vista must come to Windows 7, Windows 8, 10).

4. Changing security settings - the case is subtle and the author of the article is not responsible for your actions.