How to disable wifi password on laptop. How do I open my wireless network? Remove password from Wi-Fi network

When connecting the equipment, a password is used to access the Internet wirelessly. It is necessary to protect your local network from someone else's access and connection. However, few people scrupulously collect all access keys (for sites, for a router, etc.) and store them. As a rule, such information is not recorded anywhere, and if it is in writing, it can easily be lost. Therefore, it is not surprising that memory sometimes fails. So, what to do if Consider several options for how to get out of the situation.

Cause for concern

A router passkey may suddenly be required if you want to connect additional device(smartphone, laptop, Tablet PC) or re-establish the connection with the old computer (for example, after it has been repaired or reinstalled operating system). Recovering access to your home wireless network is straightforward. The most important thing is not to panic.

Ways to solve the problem

Most easy way, how to find out forgotten password WiFi, - view the hardware settings on the computer monitor. And for this purpose, any device that the router sees: tablet, laptop, PC is suitable. If only one computer was connected to the network, then it can be connected to the router via a cable, view the equipment settings, find the password, and only then restore wireless network... This method is suitable if your computer is equipped with an operating system. Windows Vista or 64-bit Windows 7 and has a corresponding software... Initially, you need to enter the "Control Panel". Select "Wireless Networks Control Center" in it. You will see a list with the name of the network. In its "Properties" there is a tab "Security". In it you need to find the "Network Security Key", opposite this inscription - a line with hidden signs. The password is encrypted in it. To make it visible, you need to check the box next to “Display entered characters.” Now the forgotten password will appear on the screen.

Password recovery methods

If the method described above did not help, you can resort to radical methods. For example, change the password on a WiFi router after resetting its settings. To do this, press a special "Reset" button on the device body and hold it for 10-15 seconds. This will return the factory settings. After that, you can replace the password with a new one. To do this, you need to find the "Tabs" section in the equipment settings, click "Access Control" with the mouse. Now you should select the line "Passwords". A field will appear in which you will need to enter the old and new device passwords. At the end, you need to confirm the correctness of the operation. To do this, click "Save" (Save / Apply). Of course, data such as the access key to the router are recorded in writing when concluding an agreement with the provider. But, if you have lost an important piece of paper, then you will have to pick up your passport and go to the office of a company that provides an Internet connection. But at the same time, various unforeseen difficulties may arise that will not allow recording in a short time.

Settings for different router models

There are some nuances depending on this or that router model. But in any case, when you forgot your WiFi password, you can easily spy it in the equipment settings. If you have a TP-Link router, you need to enter the "Wireless Mode" menu and select "Security wireless mode". In this tab you will find what you are looking for. Another option, if connected. In its menu, you should find the item "Wireless". It contains the information you need. If you have another problem - to recover the password for WiFi dir 300 - we recommend that you follow these steps. Find “Setup” and click on “Wireless Setup”. Next to "Enable" and "Enable Wireless" check the box to activate in the router wireless module... On a PC, look at the name of the network and enter it in the device settings. Now you need to set up encryption of traffic that comes over Wi-Fi. Then create New Password to connect to the network and save the configuration.

Password recovery software

Another geniusly simple option, how to connect WiFi, if you forgot your password - use special utilities... Fit simple program WirelessKeyView. It will help you find the necessary information on your computer so that the hardware will issue the key to the router. It is free and takes up little space. You just need to download and install it on your PC. The utility finds all devices connected to the computer and allows you to view the access keys stored on the computer. All data appears on the screen in the form of a list. Which is very convenient: it is easy to find a key that you have forgotten. You need to look for the WiFi password in the “Key” column. One important point: The program can be opened only if it was downloaded with administrator rights. This option with useful utility will not work only if sorting by mac-addresses was used on your router. Another one convenient program- Wifi Key Finder. It is very similar to the one already described above, it is also distributed freely on the Internet, absolutely free of charge. It is enough to start it, and it will scan the computer memory, find stored passwords in it to restore the wireless network. In order not to lose information in the future, it is better to print the list obtained thanks to the program or save the file. The latest version is suitable for the operating room. Windows systems 8.

One of the simplest options for avoiding unnecessary gestures in the event that you have forgotten the wifi password is to use the web interface of the router. To access it, you need to enter into the browser network address devices. Access to the web interface will be provided using a username and password. If you have not changed the key, then its factory settings will look like this: admin-0000, admin-admin, admin-1234. But, if you have already made changes and lost your credentials, then the entire setup process will need to be repeated again or resort to the methods already described above. But, choosing a password for a Wi-Fi router yourself, you need to follow the main rules for compiling it. It must be quite complex and must include numbers and letters of different case. Experts do not recommend using wep encryption.

Have you faced a situation of lack of Internet due to the fact that the router has become inaccessible? There is no way to go to the settings, since the password has been forgotten. What should I do? There are two ways: software and hardware. Let's consider how to reset the password on the router in more detail.

A bit of theory

A router is a microscopic computer equipped with a processor, constant and RAM... Management takes place using the OS.
After purchasing the device, to go to the default settings, a username and password are set. These values ​​change. What if you changed them and forgot? Let's consider this issue in more detail.

What is it for

Any router can fail. Password reset is used if:

• Forgot your password;
• incorrect settings;
• the provider has changed;
• to change settings home network.

What to do first

Resetting will change all device settings. The router will have to be reconfigured.

Hard reset

The device has a small button or hole. It needs to be clamped with something sharp (for example, a paper clip) for 10 seconds. will be reset to factory defaults.

How to reset password on Asus router

We open the browser, register http://192.168.1.1, or router.asus.com. Go to the "Administration" section.
Further, as in the screenshot.
The router will reboot. Recovery will take 2-3 minutes.

How to reset the password on a Tp-Link router

Go to 192.168.1.1. Password and login (if you have not changed it) "admin".
Next, do this:
It will happen, the settings will be restored to the factory settings.

How to reset a password on a D-Link router

A soft reset is the same as above. Write 192.168.0.1 in your browser. Then go to "System" - "Configuration" - "Factory settings".

Hard hard reset

There are situations when code fragments remain in the router's memory. The device is not working properly. Then pressing the "Reset" button will not help. What should I do? Follow the sequence of these steps:

1. Press "Reset" and hold while performing the following actions;
2. After 30 seconds, turn off the power to the router;
3. Hold the reset button for 30 seconds.

How to reset the Wi-Fi password of the router

Connect without a password using the WPS standard. Almost all router models support it. For this:

The data will be transmitted by the router. The other person doesn't connect this way.

How to view in OS

Press Win + X, select Options.
Further, as in the screenshot.

Output

We looked at how to reset the username and password on a router. The easiest way is to do a factory reset. Use it if you are sure that you can write the settings yourself. Otherwise, try to connect using WPS, or see the password in the system settings.

Your home Wi-Fi network must be password protected. But there are different cases, you say. For example, let's say you want to invite your friends and have a party. In this case, it should be foreseen that they (your friends) are most likely to want to connect to the Internet. And this, accordingly, should not be accompanied by any difficulties. And in order not to fiddle with passwords, it's better to just turn off the Wi-Fi password for a while. Then it can be reinstalled.

Or maybe you are having some kind of problem with the connection of this or that device. And in order not to bother too much, not to look for a solution to problems related to the password and the type of security, you can temporarily remove the password. Often, such problems arise, for example, when connecting a TV (Smart TV) to a wireless network.

How to remove password from Wi-Fi

So, first of all, of course you need to open the router settings. Next, go to the tab with the wireless security settings.

In the case of Asus routers, removing the password is quite easy - you just need to go to the “ Wireless network"And in the column for authentication method set" Open System».

For the new Asus web interface:

Then you need to save the settings and restart the router.

If you have TP-Link router, you should go to the tab Wireles - Wireless Security and click " Disable Security". Confirm by changing the settings and reboot the router.

For the Russian web interface TP-Link:

Confirm by changing the settings and reboot the router.

For D-Link routers, open the " SETUP"Then select" WIRELESS SETTINGS"And click at the very bottom on the Manual Wireless Connection Setup button, after that a page with wireless network settings will open, at the very bottom we see the item Security Mode choose from the list None. (For older firmware versions)

For the new web D-Link interface click on the Wi-Fi tab “ Security Settings"Further in the paragraph" network authentication"Choose open.

Apply by changing the settings and restart the router.

Please note that if you have decided to disable the password, it is also advisable to change the standard username and password to access the router settings.

You can also change it in the router settings. In case of TP-Link routers open the tab "System Tools" -> "Password".

Hey! When I write in some instructions that I need to go into the settings of the router, I try to describe in detail the process itself, how to enter the control panel in order to make some settings there. In most cases, this does not cause any difficulties. But it often happens that we simply forgot the password, and many questions arise, how, in this case, to get into the settings.

The very question of entering the settings of the router, if you forgot the password, is not very clear. Because the router has at least two passwords. And it is not clear which of them you forgot, and what is the problem specifically in your case.

• The password that is used to connect to your Wi-Fi networks.
• And the password that you need to specify to enter the router settings. Most often, it is this password that is changed, and it is successfully forgotten. It is clear that until we enter the correct password, we will not get into the router settings. Well, the factory password does not work. (which is usually admin) since we changed it.

These are the problems you may encounter when logging into the router's control panel. Now we will consider a solution based on your case, consider both options.

Immediately I give a link to instructions for solving a variety of problems that you may encounter when entering the settings of your router: There are also links to detailed instructions for specific router manufacturers: TP-LINK, ASUS, D-Link, etc.

If you forgot your Wi-Fi password and cannot enter the router settings

This is the first option in which we do not remember the password from our Wi-Fi network. And we may not be able to connect to it. And in the settings of the router, we need to go in order to see, or change the password.

In this case, everything is very simple:

• First, we have a very detailed instruction on how to. You can see the password on the computer (if any), just remember it. Connect to the wireless network and go to the control panel.
• Secondly, you can go to the router settings from the device that is in this moment already connected to your Wi-Fi. And already in the settings of the router, see the forgotten password, or change it.
• Thirdly, we connect to the router via network cable, and go to the control panel. In this case, we do not need a Wi-Fi password at all. If you do not know how to connect to the router via cable, then here is a detailed one.

With this problem, I think we sorted it out.

If you forgot the password from entering the settings of the router

This happens most often. Each router's control panel is password protected. There you need to specify a username and password. This is to protect the settings so that everyone who connects to your network cannot access them.

If the router is new, not yet configured, then it is used standard password and username. In most cases, these are admin and admin. Or there is no protection at all. We set or change this password already in the process of configuring the router. I always advise you to do this in my instructions. And even there is a separate one.

So, we changed this password, set up the router, and forgot it. And then we urgently needed to go into the settings, and we do not remember the password. On the authorization page, we indicate some kind of username and password, but nothing happens, the page just reloads, or we get a message that the password is incorrect.

That's all, we can't get into the settings. If you cannot remember this data, and perhaps you did not change the password, then you will have to reset the router settings. After that, we will go to the control panel using the factory settings, which is indicated on the bottom of the router, on the sticker.

What would do a factory reset, you need to hold down the button for about 10 seconds, which is usually signed as: RESET, WPS / RESET, Sros, Default. It all depends on the model of your router. The button can be recessed into the body, and you need to press it with something sharp. The router must be powered on. This button looks something like this:

After returning to the factory settings, to enter the control panel, use the data indicated on the router itself. If the factory data is not indicated there, then there is no password by default.

If you have any difficulties with resetting the settings, then on our website there are detailed instructions for most manufacturers. If you don’t find it, write in the comments, I will give you a link.

If something did not work out, just write, we will try to solve your problem.

The access key to the network or to the network administrator page, lost do not be discouraged. It is possible to restore them. This article will help you solve this problem.

Standard passwords for routers

Each wi-fi router operates on the basis of data access to the Internet and local network, which are login and password. They are created at the very beginning of use at the first stages of setting up network equipment. The login is always the same word in the Latin alphabet "admin", and the password can be either the word "admin" or the numbers 1234, 123, 0000.

Also, the password may not be present at all. And for the operator Kyivstar, such a login is possible.

In any case, in order not to try your luck and not waste time on random selection, you need to look at the data sheet of the router, which is included in the kit and may look like a brochure. If the router came to the user as a second-hand product and the technical passport is not available, you should ask your friends, acquaintances or relatives who use a network device produced by the same manufacturer, because login and password will be the same.

Factory settings

At the initial stage of configuration, after entering the standard identification data, the user will be offered the opportunity to change the username and password to make it difficult for unauthorized users to enter the domain. Those. on the computer screen, the interface will display all the necessary data, as well as hints on the formation of an "access key", which includes the login and password.

After passing this stage the user will be prompted to create a local network with automatic connection to the Internet for the convenience of future work. At the same time, you should not confuse the login and password for accessing a local network operating on the basis of a router and the Internet, since they are two different things.

Forgot the password from the router, what to do

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. How to be in this situation? Recovering a key is easy. It all depends on which network password and username was lost. If the matter is in the local network, i.e. in your router, there is no serious 2. difficulty to restore it.

Video: Resetting TP-Link Router Interface Password

If the user has forgotten the password of the Wi-Fi router, he needs to act as follows:

How to recover a password and login for a router, if they are required to access the Internet?

In case of loss of data for the use of resources world wide web the following procedure is required:

Thus, the user has the opportunity to independently correct the situation without outside help.

Recovering an administrator's domain

In addition to those users who have lost data on access to the local network and the Internet, there are those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover the lost information and change the settings of the network device. On the forums, there is often a question like: “I forgot my login and password from the admin panel. What do i do?". It's easier to reset the settings in network device and re-create a new local network.

To reset the parameters of the router, just press and hold the button on the rear panel in this position for a few seconds.

In this case, the lights on the front panel of the device will go out for a while, and then work again. The button itself is located in a small hole to prevent accidental reset, and you can press it only with the help of an additional device that can act as a match, needle, pin, etc.

Recovery methods

The router settings will be of no use if the user loses the access keys to the admin page, router, local network and the Internet. In this case, each of the access keys will be restored in a different way. The main methods are hardware and software.

The hardware access recovery method is associated with checking the parameters on the home page of the router, while the software method relies on the use of the software registry and special working applications that scan all information on the computer about the use of the network.

When restoring hardware to the network, at least a login and password to the administrative page is required, on which all the parameters and settings of the local network and Internet connection are formed. To enter the administrator's page, you must type the manufacturer's ip-address in the address bar of the Internet browser.

The IP address can be found on a sticker on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

1. D-link 192.168.0.1
2. Zyxel 192.168.1.1
3. Asus 192.168.1.1
4. Netgear 192.168.1.1
5. TPlink 192.168.1.1

After entering the corresponding address of the router, the user will be presented with an interface with many settings and network parameters. In order to find out the data on the local network, you need to enter the "local network" tab. Also, this tab can be called a wi-fi network or have names similar in meaning.

After that, the user should find the "wpa key" parameter. Opposite it will be located the password to access the router.

Password, access to the router - that's not all. In addition to the key for entering the local network, you may also need login data for the provider's domain. This data is also specified in the settings of the network device.

To do this, after fixing the data on access to the local network, you need to go to the "Internet" tab, where not only the parameters and connection technology will be indicated, but also the data on entering the Internet.

Most often, the login and password are located next to the line "setting account"Or" connection setup ".

Restoration by utility (program)

In addition to the hardware method of eliminating the problem of loss of identification data when entering the Internet and the local network, there is also a software one. It is used professional users and is not suitable for helping beginners. Thus, the participation of a second user with a higher level of knowledge in this area will be required.

With the programmatic method, the following working applications are used to help restore the necessary data by logins and access passwords:

1. Dialupass;
2. Remote Desktop PassView;
3. RouterPassView;
4. WirelessKeyView;
5. Wireless Password Recovery.

And this is not the whole list. By themselves, these programs are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decided on independent actions, then he needs to be prepared for the fact that most links to such working applications may contain malicious software.

Throughout the entire operation of the profile program for searching and detecting the login and password from the network, an antivirus with the maximum possible set of functions must work on the computer in order to prevent infection of its personal computer and damage or theft of personal data.

The work of such programs is based on the basic principles of the operation of the operating system, which, in turn, records every step of the user in the electronic information space. At the same time, a register is formed that describes all the actions taken recently. They will be stored as encrypted files until all memory on the hard drive is full.

It is impossible to open these files without special knowledge and professional skills.... Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, we need special applications to help uncover encrypted logins and passwords.

After the appropriate use of the program, the owner of the PC will be able to independently use both the local and the Internet network in the future. But at the same time, we must not forget that all network access keys must be saved without fail, both in the form of a regular file with printed text, and in writing, so as not to experience significant difficulties in connection in the future.

Video: installing and configuring a Wi-Fi router

To prevent the loss of data for access to the local network and the Internet, novice users are advised to take the following steps:

1. during configuration and installation of drivers on network equipment, the program will offer to save a file with backup data for access on the PC desktop;
2. after creating with the network access data, the file must be copied to removable media and another copy made in any other folder;
3. after copying the files, you must manually write down on paper all the necessary logins and passwords from the network.

In addition, do not forget that the keys are also freely available for viewing from the computer of the user configuring the router. This data can be seen in the properties of the network. To do this, you need to find the network connection icon on the taskbar on the desktop in the lower right corner.

Then move the cursor to the name of the home network and press the right button. When a new window appears, select the "properties" option and in the next new window you can already see all the necessary keys.

Using these tips will reduce the likelihood of complete loss of the necessary information for the local Internet.

Question answer:

How do I view the Wi-Fi password in Windows?

To view the password for accessing the wireless LAN in Windows, you must:

Is it possible to recover the network security key?

It is not difficult to recover the security key for access to the local network. It is enough to go to the administrator's page and find the "security key" line in the settings, where the access password will be indicated.

How can I find out my login and password if I have lost it?

In order to find out the login and password for accessing the Internet, the administrator's page or the local network, you should use specialized programs (Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in encrypted files of the network usage history.

Similar information can also be found on the home page of the router, if you have not lost the access keys to it.

What to do if I forgot the password from the wifi (wi-fi) router?

If the user has forgotten the password from wifi router it is necessary to use specialized programs for reading encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device settings to factory settings by pressing the button located on the back of the router. Next, you need to reconfigure the network equipment and the network itself

>