How to connect from the computer to the laptop. Connect the Internet on a laptop: all possible ways

Many users face the problem of transferring data between the laptop and the computer. As a rule, the data weigh a lot of gigabytes, and it is very uncomfortable to carry them with a flash drive. For a more elegant solution to this problem, the laptop must be connected to a computer using a network cable, thus creating a small local network of two computers. Now we will tell about how to connect a laptop to a computer through network cable.

In order to connect a laptop to a computer, you need a chenched network cable. Under the fasciated network cable you need to understand vitua couple Categories 5 or higher (CAT 5) with installed 8p8c connectors (most often they are mistakenly called RJ45) at both ends of the cable. The way crimping in our situation does not matter, suit both direct cable and cross (CrossOver). You can buy a cable and connector separately and execute the crimp yourself. This can be found in our article "". But it is easiest to buy a pinned cable immediately. Such a cable can be found in stores that sell fine electronics, various cables and adapters.

In order to connect a laptop to a computer, you must connect the network ports on the laptop and computer as well. Setting local network It will not be difficult even for not too an experienced user.

First you need to go to the network connection settings on your computer. We go to the control panel, and then go along the way: Network and Internet Network Management Center and Shared Access - Change the adapter parameters. Here you need to find a network connection to cause its properties. To do this, click on the connection icon right-click and select "Properties".

After that, you should open the window in which you can enter.

For the computer, specify such settings:

• IP Address - 192.168.1.1

After we have completed the computer setting, the same actions need to be repeated on the laptopOtherwise, connect the laptop to the computer will not succeed.

On the laptop, you open the control panel and move along the path: Network and Internet, network management center and shared access - change the adapter parameters. Further open the network connection properties and properties for the Internet version 4 protocol. In the window that opens, enter an IP address for a laptop.

For a laptop, specify these settings:

• "IP address" - 192.168.1.2
• "Subnet mask" - 255.255.255.0

The remaining fields are left empty. The result of the setup is saved by pressing the "OK" button. As you can see the process of setting up the laptop exactly the same. Only the IP address is distinguished. For a computer, we indicated 192.168.1.1, and for a laptop 192.168.1.2.

After we have connected the laptop to the computer and configured the local network, you can check its performance using the Ping command. For this, on a computer or laptop. In the window that opens, you need to enter the Ping command and the iP address of the second computer.

For example, if the IP address of the computer is 192.168.1.1, and the laptop 192.168.1.2, then to check the operation of the network on the computer you need to enter the "Ping 192.168.1.2" command. Thus, we "plug" a laptop from a computer. If the network works, then you should see that answers come from your laptop.

Instruction

Open settings network connection . Go to TCP / IPv4 Protocol properties. Find the "IP address" field and enter the value of 192.168.0.2. Fill in the "Main Gateway" and "Preferred DNS server" items in a similar way, replacing the last segment of the address per unit.

Switch to stationary computer. Create and configure Internet connection. The cable of this connection must be connected to the first network card. Open the properties of this connection. Select the "Access" tab. Allow general access Internet for a local network formed by a PC and a laptop.

Suppose you have no desire to create a wired local network. In such situations it is customary to use Wi-Fi adapters. These devices are two types: internal and external. Check any of them. Connect Wi-Fi to your computer. Be sure to install software And the drivers attached with the equipment.

Open the Network Management Center and Common Access. Go to the "Wireless Network" menu. Click the Add button, which is located on the top of this menu. Select the option "Create a Computer Network" option. Enter a name (SSID) wireless network And password (Password) for her. Select the type of security.

Video on the topic

The laptop is a full-fledged computer in a compact form. It means that its components can be used as elements conventional computer. And display laptop You can use to display a video signal of another computer. This task can be solved using additional software: Maxivista applications.

Instruction

Connect the laptop and computer to the network. To do this, you will need to configure Wi-Fi data transmission or create a network based on wired technologies: you will need one switch and two patch cords. Download from the official website www.maxivista.com the program of the same name and install the server version of the program on the computer hard drive. On the laptop you need to set the client part of the viewing program. Before installing, it is recommended to complete the execution of all utilities that relate to video cards. As a rule, both types of software on personal computers must be installed in the system local disk operating system.

Run the program on both computers. The program on the server will detect the client part over the network and establishes the connection. The full version of the program supports a connection to four computers into a single integer for transmitting a video signal. If you have four computers, then you need to connect them with each other with special cables or also wi-Fi Network.

Disable windows Firewall and spam-firewalls. Make sure the program is available ports 6100, 6151, 6951 and others specified in the program instructions. Select "Second" - specify in the desktop settings to transmit data to the second screen. Maxivista is paid software. For the use of program functions, developers are asking about $ 50.

The demo version of the program is also available for download, however, has some restrictions on the list of features. If you are exactly sure that this software you will need to take a long time, it is better to buy full versionSince all parameters are not available in the demo.

Sources:

• laptop as a monitor

Sometimes such situations occur at which a person has problems with computer equipment. For example, there may be a situation at which you need to use a laptop as a monitor. Is it possible to do this and how?

Cable connection

The most reliable and stable way today make a monitor from a laptop - use a cable connection. The connection type depends on the laptop model, however, almost always the VGA or HDMI connectors. In rare cases, a laptop can be one connector, and the PC is different, and then to connect two devices you need to use a specialized adapter.

After determining the cable and connecting two devices, you must go to the display settings. To do this, you must enable your PC, wait for the desktop boot and go to the screen resolution properties. In the window that opens, the display parameters will appear.

In order to use a laptop as a display, you must select the monitor by its name in the list of available displays. After that, you can choose one of the items - leave a working one of the monitors, duplicate the image or expand monitors. You must confirm your actions to the "Apply" and "OK" buttons.

Pros and Cable Connection Cons:

The pros will be attributed to:

• reliability;
• stable connection;
• simple setup.

The following points include the following points:

• probably, a person may have no cable;
• discrepancy between the connectors on the PC and the laptop;
• the need to buy an adapter.

However, many use exactly this way if you need to use a laptop as a display in the presence of a working PC monitor

Wi-Fi connection

If Windows 7 or later is installed on the computer (it also applies to MacOS), you can install the Air Display program. It makes it possible to quickly connect the laptop to the PC on Wi-Fi. But for this, the program must be installed immediately on two devices. The program itself will tell you how to do it.

You can also use the Maxivista utility designed to perform the same feature. There are two versions of this program:

• server (installed on the main unit);
• client (installed on a managed device).

When you first start this utility, the server will automatically detect a client laptop. After the software is connected to a laptop, the program will offer several steps, and then use a laptop as a monitor. The main disadvantage of the utility is paid use.

Instead, you can use Rdesktop, more popular TeamViewer and others similar programs. True, these programs are characterized by a more complicated setting and not so rich functionality, but TeamViewer, for example, can be used for free without restrictions.

There are situations where you need to connect a laptop to a computer (for example, when transferring a large amount of data). This is done in several ways.

You can connect two devices using a cord by creating a local network. This will require a crimped network cable. It can be purchased or done independently by crimping the conventional cable using connectors. Network ports on a laptop and computer are connected and configured by manually Local Network. After connecting the devices, you need to enter the network connection on the computer. Next, the "Control Panel" is selected and you need to go to the "Network and Internet" section, then in the "Network and Shared Access Center". The next step is "Changing the Adapter Settings". Here you need to select a network connection and the right mouse button to open the "Properties". In the window that appears, the Internet Protocol version 4. Next, the "Properties" button is pressed, which is at the bottom right. A window opens in which you want to enter the IP address. For a computer, it is next - 192.168.1.1. The subnet mask is also introduced - 255.255.255.0. All other fields remain empty, the "OK" button is pressed. The same actions must be done on a laptop, only one digit changes in the "IP address" row - 192.168.1.2, and the subnet mask remains the same. After that, you can check the operability of the local network using the Ping command. To do this, the command line is launched ("Start" - "All Programs" - "Standard" - " Command line") And the" Ping "command is entered, as well as the IP address of the laptop. If everything was done correctly and the network is running, response messages should appear on the laptop.

You can connect a laptop with a computer with using wi-fi. For this, the router is connected to the computer. Passwords are necessarily created for accounts on both devices. Also indicate disks and folders to which access. To do this, you need to right mouse click on the desired folder And in the properties to set "access". Next - "Extended Setup" and put a box next to "open sharing to this folder".

Last Stage - Connecting a laptop to a computer. On the control panel in the "Network and Internet" menu, you need to go to the "Network and Shared Access Center". Selects item "View network computers and devices. " In the window that opens, the computer account must appear to which you need to connect. If you click on it - a window will appear for entering a password (one that was originally created for account on the computer). A password is entered by a laptop connection with a computer.

These are the most common ways to connect two devices. You can also connect a laptop with a computer using Infrared port Or Bluetooth, but not all devices support these functions. In addition, the transfer of a large amount of data will last a few hours. Therefore, the most common connection methods are using Wi-Fi or a conventional centered network cable.

Your laptop stopped working and are you going to get rid of the non-working "trash"? Do not hurry. Completing devices that are still suitable for use, you can always sell or make something interesting of them. For example, you can use a laptop screen as a monitor for a personal computer. I wonder if it is not true? But how to connect a laptop screen to a computer? We will talk about it today and talk.

Modern "Handmade"

Nobody is insured against the emergence of unforeseen breakdowns, right? Devices household appliances Also are no exception. But did you know that technical problems can be made to work for yourself? It sounds pretty unusual, but it is. Here we have a broken laptop, and it's waiting for us at home personal Computer Without work monitor. Why not turn the laptop display to a new monitor? Why throw money to the wind?

This will require the presence of the laptop itself and, of course, the desire. How to connect a laptop monitor to a PC? Let's get acquainted with this interesting procedure together, paying attention to the most an important nuances.

What ways can be connected?

Here we have on your hands the device that once performed its work. Its presence is enough for a very creative exit from an awkward position. In order to start implementing this interesting plan, you need to prepare a little. First you need to get acquainted with the most common ways of interfacing two devices.

Cable Switching

For the first case, you will need a connection cable, with which all this is the case and will turn. Most likely, there will be enough VGA cable, but no one forbids you to use his analogues. One of these representatives is a DVI cable. Also this option will require the availability of installed operating windows systems On the personal computer used.

Important! But there is exceptions here. Owners of devices based on operating mAC systems It will be necessary to get a HDMI cable.

1. Insert one end of the wire into the laptop connector, and the second - connect to the computer.
2. Run the laptop, wait for it to fully inclusion.
3. Right-click on the empty desktop space.
4. In front of you will open context menuin which you want to find and open the "Properties" tab.
5. Now you need to select the "Screen Properties" item and go to the "Parameters" section.
6. You will see a drawing in front of you, on which the screens with numbering are indicated. Select the second screen and set the position that corresponds to the actual location of the laptop.
7. Next, tick the desired display of visual information. To select the main monitor, you must set the mark on the "Use this device as the main" tab.

Important! You can always return everything back by doing the same actions.

Everything is simple and understandable here, but how to connect a laptop monitor to PC owners of "apple devices"? You need to do the following actions if you have already installed the connection of devices by cable:

1. Go to section " System settings"And find the" Monitors "tab there.
2. The same location of the image output devices will appear, which users of Microsoft operating systems could notice.
3. Do the same manipulations by the location of the screens.
4. Save the settings and take to work.

Devices are ready to use!

Remote access with

And if you do not want to use the wires, having a "apple technique" in stock, you can use special applicationwhich is called "Air Display". It will be necessary to install this software on the working laptop. This program located in free access On the official Apple website.

This method is the most simple as possible, because for conjugation you need to run the program after it is installed and follow the instructions that the developer carefully equipped this software.

Important! Using "Air Display", you can not only switch monitors, but also use them together. The work is carried out on the principle of remote connection.

If both of your devices run on the Windows operating system, then no one prevents you from installing software to work with Microsoft products. Programs do not cause any difficulties due to ease of use. We recommend using this connection method, if your devices work regularly and comply with system requirements.

Important! Do not forget that when using any computer software, it is desirable to use protective programs. We suggest you read about.

Conjugation of devices using Wi-Fi wireless transmission

The Internet without wires has long ceased to be rare. So why not take advantage of them for this case? Synchronization can be carried out by doing the following:

• Install the program called "Maxivista". Software developer did not take care of creating free versionTherefore, you will have to go a little to upset or use the trial version of the program.

Important! Functional trial version Differs from the functional full! Read carefully product description.

• After installation, you need to use special modules and configure them according to the instructions from the publisher.
• If you are all done correctly, then the excellent ability to control the screens is remotely using Wi-Fi.

Important! If you spend a lot of time at work with a PC, you will certainly come from time to time the screen design and want to change it. So that you have a scope for fantasy, we suggest you keep yourself in bookmarks useful advice and instructions:

There are many ways to transfer information from a computer to a computer, and the use of each of them is due to the conditions and capabilities of the one who needs to be transported. In particular, two protocols are provided in laptops specifically for appropriate purposes: LAN and WLAN.. Also on modern machines HDMI port. But is it possible to use it to exchange information between devices, and if so, how to connect a laptop to a laptop via HDMI, about it next.

Connect the laptop to a laptop through HDMI is quite simple. To do this, insert cables in the nests, and ... and nothing further. The fact is that HDMI in laptops only works on the output. That is, it can transmit data, but it is not capable of getting them.

HDMI in laptops is designed to output images and sound on external device Output, such as TV. Thus, it turns out that connecting two laptop HDMI cable is meaningless.

How can you connect laptops with each other

But, however, why at all try using HDMI technology to exchange data between laptops, if there are several other protocols in modern devices, which are specifically designed for these purposes.

Method 1. Using Wi-Fi

The easiest way establish a connection between two laptops - it is to combine them in private WiFi Network . For example, in Widows 7 it is made extremely simple. For this you need:

1. Go to the "Control Panel" - "Networks and the Internet" - "Center for Network Management and Common Access";
2. Select "Wireless Network Management";
3. Click on "Add";
4. Select "Create a computer-computer network;
5. Press "Next", enter the name of the access point, specify the encryption method and come up with a password;
6. After that, click "Next" - "Ready".

Then you will need to change the shared access parameters for which you need to open. Extra options Shared access "and, for example, for the" home and working "network, put all the switches to the" Allow "position.

The created network will allow sending files from a laptop to a laptop to use the public Internet (if shared access is enabled), etc.

Method 2. Connecting through LAN ports

Another option - This is a laptop connection to a laptop through LAN ports. This will require a cable with appropriate inputs / outputs. To create a LAN connection, you will need:

1. Connect the cable to two laptops;
2. Press "Win + R" and enter "NCPA.cpl";
3. In the window that opens, click right-click on the "Local Area Connection";
4. Select "Properties";
5. In the window that appears, you will need to click twice to the "Internet version 4" protocol;
6. In the displayed window, enter: "IP address": 192.168.1.1, "Mask": 255.255.255.0.

On the second computer, you will need to repeat these actions, only specifying other data: "IP address": 192.168.1.2, "Mask": 255.255.255.0. After that, two computers will be combined into one network, and they can freely share information.

Method 3. Connect laptops through Bluetooth

Another option - This is the connection of two laptops by Bluetooth. To install the connection for this protocol will be required special programFor example, BlueSoleil. How to configure the Bluetooth connection, see the instructions supplied with the software.