Menu
Is free
check in
home  /  Problems / Firmware Digma Optima Prime Tablet. Self-firmware Digma tablet update system software

Tablet firmware Digma Optima Prime. Self-firmware Digma tablet update system software

Official android firmware 4.2 [- Stock ROM file] -
Caste firmware Digma -

If a custom or official firmware on Digma has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free will help it incl. With backup and manuals. Just do not forget to write and reviews your smartphone - it is extremely important. This page will also appear firmware on Digma Optima 4.0. Please note that the Digma model requires an individual ROM file, so you should not try firmware files from other devices.

What are there castomous firmware (Firmware)?

  1. CM - Cyanogenmod.
  2. Lineageos.
  3. Paranoid Android
  4. Omnirom
  5. Temasek's.
  1. AICP (Android Ice Cold Project)
  2. RR (Resurrection Remix)
  3. MK (Mokee)
  4. Flymeos.
  5. Bliss.
  6. crdroid
  7. Illusion Roms.
  8. Pacman ROM.

Problems and disadvantages of smartphone from Digma and how to fix them?

  • If Optima 4.0 does not turn on, for example, you see white screen, hanging on the screensaver or only flashes alert indicator (perhaps after charging).
  • If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
  • Not charging (usually, problems with iron)
  • Does not see the SIM card (SIM)
  • Camera does not work (for greater extent, hardware problems)
  • Sensor does not work (depends on the situation)
For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hard Reset for Digma Optima 4.0

Instruction how to make Hard Reset. On Digma Optima 4.0 (Reset Settings). We recommend to get acquainted with the visual guide, which is called on Android. .


Codes for resetting settings (open the dialer and enter them).

  1. *2767*3855#
  2. *#*#7780#*#*
  3. *#*#7378423#*#*

Hard Reset via Recovery

  1. Turn off the device-\u003e Go to Recovery
  2. "WIPE DATA / FACTORY RESET"
  3. "Yes - Delete All User Data" -\u003e "Reboot System"

How to go to Recovery?

  1. hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
  2. the menu will appear with Android. Everything, you in Recovery!

Reset settings on Digma Optima 4.0 can be done in a completely simple way:

  1. Settings-\u003e Recovery and Reset
  2. Reset settings (at the bottom)

How to reset the graphic key

How to lose graphic keyIf you forgot it, and now you cannot unlock your smartphone Digma. On the Optima 4.0 model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.

  1. Reset graph. Locks -
  2. Password reset -

Your device, which sometimes allows you to breathe new life into it. With some gadgets, everything is extremely simple, but with others you have to tinker. Next, you will learn how to flash Digma Tablet. This is done for 30-40 minutes.

Excellent tablet to perform simple tasks

Update of system software

It is important to understand that with an independent flashing of tablets on Android, they return to the factory state. That is, programs that have been installed, data, photographs, etc. are completely erased. Therefore, in advance you should transfer important files to removable media or on a PC.

You can flash Digma at home, you will need some archives for this that will contain files for firmware. There are two of different waysBut both of them are performed quickly. Next, we will analyze in detail each of them.

First method

Suitable for the devices of the IDJ / IDS line:


Second way

More suitable for Digma, which is older: IDX. Before starting, check if your gadget is at least 50%.

Date: 03/30/2015
Changes:

  • Android 4.4 Kit Kat version
  • Increased time autonomous work Tablet, optimized Battery discharge linearity
  • The work of the GPS module is significantly improved.
  • Increasing the available memory thanks to changes in the order of internal memory breaking - all available volume is highlighted for installing the application. internal memory
  • By numerous requests increased speaker volume
  • Improved visualization - corrections are made in graphic interface
  • Improved dialer operation - increased response speed, fixed possible mistakes Works 2 SIM cards
  • Optimized work S. rAM - Improved system stability
  • Improved camera operation - fixed frame size settings
  • Improved support for SIM cards of different operators - incl. Implemented UTF16 support for SIM cards
  • Optimized data with data - Added built-in application for archiving and data recovery
  • Made system correctionsupgraded

Update Utility: digma_mtk_flashtool_pack_v5.rar - Download (44.6 MB)

Instructions for updating the built-in
Digma tablets with utilities
Digma MTK Flash Tool v5.x.

Version of document 2.1 from 30/03/2015

Attention! If you have difficulty understanding the terms "Installing Drivers", "Firmware Image" and
etc., we strongly ask for help from specialists with relevant qualifications.
Please note that the restoration of the device after unsuccessful or incorrect firmware is not
It is a warranty case, and may be paid. Update on the device you produce on your own
Fear and risk.

Everything official firmware Tested by our specialists and with the proper execution of instructions
Installed correctly.

The firmware procedure will delete all your data and the programs you have installed from the device. Before
Firmware Take care by backup copying Your data on the computer, for the purpose of subsequent
Recovery.

Firmware order:

1. Ensure stable and continuous operation. personal computer (PC) during
Flashing - the firmware procedure should not be interrupted.

2. Download the computer archive with the Digma MTK Flash Tool utility, remove the archive contents
Completely in a separate folder on the computer.

3. Download the device to the computer with the device firmware, remove the contents of the archive completely in
Separate folder on your computer.

Attention: the full path to folders with the utility and firmware should not contain symbols of Cyrillic

(Russian names) or other national alphabets, only names in Latin are allowed.

For example, the path CJ / Users / Andrew / My Documents / Firmware is incorrect !!!

4. Disconnect the Digma device from the USB port (if it is connected) the computer and turn it off.

5. If you flash a similar device for the first time on this PC, it will be necessary to pass
Installation procedure necessary drivers - In the Driver_Auto_installer folder, start the Install file and
Wait until the installation is completed.

6. Open the Digma_mtk_FlashTool utility folder, open the FlashTool folder and run the utility
To update the firmware (application Flash_Tool)

7. The main window of the FlashTool application opens

in a folder with firmware Devices appropriate file
Scatter, for example "MT6582_Android_scatter.txt".

9. In the firmware selection field, select Firmware Upgrade (if the utility displays a message from
An error, then repeat the start in the download only). Do not use Format All if it is
It is clearly not prescribed by the update instructions.

10. Click the download button in the program (Green Down Arrow)

11. Press the "Volume-" button and holding it down, connect the tablet to USB port Computer.

12. If this is the first firmware of the tablet of this type on this PC, then operating system Detect
A new device will start installing drivers. If the system could not install the driver
automatically and asked to specify the location of the driver files, then specify the folder with
Manually manually drive. Drivers are in the update utility folder, in the subfolder "Driver". For
Specifying folders Record the folder corresponding to your operating system.

If the driver installation does not occur automatically, then you need to find in the device manager
Unknown device or MT65xx Preloader device and manually update the driver

13. The firmware process will begin. After the firmware process starts at the bottom of the Utility window (in the area
status) will be displayed stages of the firmware process - move the color indicator of progress

14. Wait for the firmware process

15. Disconnect the device from the computer, turn on the device. Primary loading device after
flashing includes the device initialization process, and may take a longer
Time than usual.

ATTENTION: using Format. may result in erasing IMEI and calibration data apparatus,
necessary for its correct work. IMEI recovery is not a warranty case and
possible only in conditions service Center on a paid basis.


Before you detailed step-by-step instruction About how to flash the tablet Digma Optima Prime. Our editors were chosen the most suitable way To firmware this model Digma. If a this instruction Result will not give Try to flash another method: TWRP Recovery. , Rom Manager, FastBoot or Classic OTA.

Warning! After the firmware of the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installation of the system method CWM Recovery. 1. Charge the styled tablet at least 80%. 2. We save from the flash drive, the sim cards and the memory of the tablet all the data that cannot be lost. Simka (if any) can be pulled out. 3. We place the necessary firmware in the memory of the tablet. The firmware file must have an archive format zip.. You can choose and download the firmware. 4. On all Digma tablets there are recovery from the manufacturer, so we change it to ClockworkMod recovery. We do this on such instructions: Install the application from Google Play on the tablet. Take it and provide ROOT rights. If the Rutign is not on the tablet, we get them. In the Options list, select "CWM Recovery". Then the application will show a list of available recovery. In the example, Rashr showed 2 options: ClockworkMod with support for the press on the screen and the classic option (control is performed by the volume and power button). A download request will appear. Click "Yes". Then the CWM Recovery image is started for the tablet. A notification will appear that the firmware has been successful and now you have installed modified recovery. Immediately go to it, for this click "YES". Ready. If you have already been installed clockworkmod recovery, then just enter it by clamping for 3-5 seconds any of the combinations: - Volume Up + Power Button - Volume Down + Power Button - Volume Up / Down + Enable Button + "Home" - Volume up + volume down + power button 5. The movement in the recovery menu is carried out using the volume buttons, and confirm the selection of the power button. Before installing the firmware, you must first make a reset of the settings. Therefore, in the menu, select item. wIPE DATA / FACTORY RESET.
6. Next, just confirm that you agree to make a reset: YES - WIPE ALL USER DATA.
7. Now in the main recovery menu, select install Zip..
8. After that, select Choose Zip From / Sdcard.
9. Go to the folder in which you saved the zip firmware file and select it.
10. A request for confirmation of action will appear. Choose YES - Install ....
11. The firmware installation process will begin and the inscription will appear at the end Install From SDCard Complete.. The firmware is completed. Return to the main menu CWM Recovery and reboot the tablet. To do this, choose reboot System Now..
12. Ready. Loading the tablet from the already installed firmware. Other materials