entranceHow to remove network locations. How to fix the removal of network locations
To provide fast access To frequently used files and locations, Windows 10 tracks the user circulation to them. Based on the data obtained, the system generates lists of transitions in the Start menu, as well as in the context menu of the conductor called by clicking the right mouse button on the latter icon on the control panel. The list includes not only local directories, but also network folders. Perhaps for some kind of reasons you want to hide network resources from the list of transitions.
An explicit setting that would allow it to do in Windows 10 is not to disable their display, you will need to apply a simple TVD registry. Running the editor of the editor Regedit to the same name, go to the next key:
HKEY_CURRENT_USER / SOFTWARE / POLICIES / Microsoft / Windows / Explorer
The last subsection you may not be, if so, you will need to add it manually from context menu editor. In independence from the discharge of your system in it, create a 32-bit DWORD type parameter with the name NoreMoteDestInations and install as its value 1. Network locations will be hidden from the list of transitions after windows reboots 10.
Hide network folders from this list can also be with a local policy editor. After running it with the GPedit.msc command, expand in the "User Configuration" section. Record administrative templates - Start menu and taskbar, find the policy "Do not display and not track the items in the transition lists ..." and turn it on. New settings will be applied after rebooting the computer.
This article will describe four ways to change the type of network (network location) in Windows 10.
In operating rooms windows systemsStarting with Vista version, various network profiles are used to provide greater network security. In Windows 7 there were profiles "publicly available network" and " home network". Starting with Windows 8 Profile" Home Network "renamed" Private Network ".
The profile "Public Network" imposes large quantity Restrictions on the transfer of data over the network. For example, a home group cannot be created in a publicly accessible network. The profile "Private Network" has fewer restrictions.
Technically, each of these profiles is a set of firewall settings and local security policies.
Open the "Network Management Center" (right button on the network icon in the tray) and you will see there:
This illustration highlighted the network name ( Network 2.) And its type is publicly available. In the terminology used by Microsoft, the network type is called "Network Location". That is, everywhere in windows interface Signatures of the type "Network Location Open" or "Network Location Private".
Default when creating new network, Windows assigns a "public network" profile. When you connect to any network, Windows 10 gives out such a request:
If you press the "Yes" button, the network will be assigned the type "private". But if you click the "No" button or ignore this request, then Windows 10 will assign this network type "publicly available".
If only the Internet passes through the network, then there is no difference in which type of network. And it is even preferably used a "public network" profile, because it is safer.
However, when connecting computers to the local network, its type is already important. It may be necessary to change the network profile with "publicly accessible" to "private" to reduce data transfer restrictions in this network. Data transfer is meant to transmit files between computers, sharing shared resources, such as printer.
On Windows 7, you can change the network type directly in the "Network Management Center", but there is no this feature in Windows 10. If you want to change the network type under Windows 10, it must be done differently.
There are several options.
Change network on private through Windows 10 settings
The first way is to use the standard opportunities in windows settings 10. You need to click on the network icon in the tray and click the "Network Parameters" command in the menu:
Then click on "Ethernet" (or on WiFi) and in the right pane to click on the adapter name:
Some complexity for understanding here is that the name of the adapter does not coincide with the name of the network in the Network Management Center. Such a kind of kind.
At the very top of the new screen (adapter properties), you need to turn on or off the switch:
Position Incl"Changes the type of network on" Private". Position" OFF"Changes the type of network on" Publicly available".
Change network for private through local policies
The second way. Open local politicians Security:
- Or through the control panel - administration.
- Or windows + r on the keyboard then secpol.msc. And Enter.
There you need to open a policy that has the same name as the network you need (the very first screenshot of this article). It is in the "Network Manager Policies" branches:
Then in the properties of this policy, open the "Network Location" tab and indicate the type of location and user resolution:
Note! The user resolution needs to be set exactly as it specifies on the screenshot - "the user cannot change the location." With other options, the configuration will not work.
Change the type of network of Windows 10 through the registry
The most simple and fast way - editing windows registry. But at the same time it is the most unsafe path. If you do not know how to handle the registry, then read the article to the end and use more secure ways.
In the registry you need to find the key HKLM \\ Software \\ Microsoft \\ Windows NT \\ CurrentVersion \\ NetworkList \\ PROFILES.
This key must contain at least one key named type. (84464 ..... E00). Each such key corresponds to one network that is displayed in the "Network Management Center". Callate the S. key necessary network You can by parameter " ProfileName."This parameter contains the network name that is displayed in the" Network Management Center ".
If you have several profiles in the "Network Management Center", then by parameter "ProfileName."Find the desired key and, in this key, change the value of the parameter" Category.".
Parameter values \u200b\u200b" Category."There may be the following:
- 0 - "public network".
- 1 - "Private Network".
- 2 - domain network.
Change the "Category" parameter to one of these values \u200b\u200band close the editor. If immediately after this type of network has not changed in the "Network Management Center" then restart Windows.
Modify Windows 10 Type through PowerShell
You can still do the same through PowerShell, but this method seems to me the most inconvenient. The fact is that a very long team of writing will have to:
Set-NetConnectionProfile -Name "Ethernet 2" -networkcategory Private (or Public)
Ivan Sukhov, 2016
If you were useful or just liked this article, then do not hesitate to support the author's material. It's easy to do throwing money on Yandex wallet number 410011416229354. Or on the phone +7 918-16-26-331 .
Even a small amount can help writing new articles :)
Question: how to remove an element from network accommodation
In "Computer" there is an element of a network environment if you click on it, Explorer hangs and has to complete its process. I want to remove it, but even I can not click on it
Answer: vavun., thank you, helped. I had to remove the news of NS, because even if this element hurt the selection, also freezes Explorer.
Question: How to make a disk from the network location folder?
7 (64)
Connect access via FTP via "Computer / Connect Network Disk".
Now I open the computer and see a network folder. Everything is working.
And how to make disc from this folder?
I need a disc to make a backup through the Sync Toy, but Sync Toy does not see network folders. Perhaps if from the network folder to make a disc, she will see and I can unload backups on this disk.
It is possible for my task you can do without a network folder and do not necessarily make a disk from it. In this case, please give advice.
Answer: Thank you. I tried NetDrive, but for some reason after some time loses a connection with the server. But the disc creates and this disk saw a program that makes backups. It is a pity that the unstable work of the disc itself. For some reason, in the status, all the time writes that it is connected and it is visible, but after a while you go, and he does not answer.
When there was a network folder created windows tools, At any time, it was possible to contact her and there was no failure, and with a disk via NetDrive somehow did not work out.
Maybe advise other programs that can make a disk from a network folder? Free preferably.
And ideally, maybe there is a way through staten tools. Read that you can command lineBut there it was shown that the disk is made from the usual folder, and it is necessary to from the folder that is on the Internet.
Question: Windows does not remember the representation of the elements of the network folder
Good day. In the default network folder, the items are displayed as "small icons". I change them to the "Table" or "list", and after closing this folder, it opens with "small icons".
Ordinary folders on the computer remember these changes and when re-opening the elements are shown in the desired form. Where and what can you configure so that network folders behave also?
P.S. axis 7-ka.
Answer: ap.
Question: How to delete all network locations in Windows 7 x64?
How to delete all network locations in Windows 7 x64?
So that the network cord inserted into the laptop led to the appearance of the dialog box
With the choice of network location.
I will make a reset network settings Any degree of global, if necessary.
Some kind of elusive glitch with access to an Internet, and the OS reinstall does not want!
Answer: Denis451,
Control Panel \\ Network and Internet \\ Network Management Center and Common Access - Lkm on the Bench icon.
In the pop-up window. At the bottom of the LKM on - combining and deleting network accommodation.
Question: Suspicious Files Requires Network Connection
Good day.
My firewall Outpost recorded a strange behavior in both browsers (in Mozile and Exlorer).
I removed princekrins with the firewall messages and placed them in the fact that the first was on hand, to the Word (attached files "Printscreen1" and "Printsrins2")
At first I did not want to give files permission to network connection. Pressed in the firewall button "Block", in which case both browser refused to work.
Now in order:
1) The first amhooker.dll file (from the SISTEM32 directory). He began to ask to install a network connection through Mozil.
I googled him a bit and found out that it seems like this is a mouse driver. But its data differ slightly from standard. The date of creation of this file I have 11.02.2007, and everywhere it is written that the date of its creation is 10.02.2007. Mouse I use another.
2) The second IeFrame.dll file (from the SISTEM32 directory) began to set the network connection through the exploitor. Also, through the explorer, they tried to enter another 3 files.
Partially, their placement is visible on the domain.
They are in the C / WINSXS directory
I found one file there, instead of three. ATL80.dll file
4) None of the found files are removed by hand.
5) The system rearranged literally yesterday. I reinstalled because I found several Trojans in it.
Tell me, please, what is it? Viruses, Trojans? What to do with them?
Thanks in advance.
Answer:
Message from thyrex
Nothing bad in the logs. Well, on the screenshots and see something impossible.
Printskrins failed ...
Sent Kaspersky files.
Here is the answer:
Hello,
This message is formed by an automatic reception system. The message contains information about which verdicts to files (if any in the letter) will endure antivirus with recent updates.
Amhooker.dll,
Atl80.dll,
msvcm80.dll,
msvcp80.dll,
msvcr80.dll
Malicious code in files is not detected.
An unknown file was obtained, it will be transferred to the viral laboratory.
Sincerely, Kaspersky Lab
Let's see what will be longer.
Added after 29 minutes
The answer came from Dolba.
Your request was processed Automatic system. The file you sent is in the database of trusted (clean) Dr.Web files and does not pose a threat.
If you are sure that this file Represents a threat, please inform the details in the answer to this letter.
Meanwhile, I have: I stopped turning off the Internet. The "Local Connection Status" window simply freezes. When it is disconnected through the Windows Task Manager, it gives the message "Selected that does not respond to the Explorer.exe program. The program does not respond. "
After the operation of the Internet does not turn on. Window begins to hang.
When the computer is disconnected, it does not complete wINDOVS work. The computer is not turned off.
Systems will probably have to reinstall ...
But maybe someone have any thoughts before?
Can the exploitor to demolish?
Added after 3 hours 41 minutes
Printscreen:
The first amhooker.dll file (from the SISTEM32 directory) to set the network connection through the opera.
Request for network connection from atl80.dll and msvcr80.dll in Mozile
If it does not complicate, comment.
Question: requires a password when entering the network drive
Such a problem: on one computer, when you try to enter one of the network drives, it starts to require a password. Although before that I did not require. On the other network drives come out without problems as before. What to do to remove the password request?
Answer: Most likely we are talking about balls on other PCs. If so, most likely you need to see what kind of accounting is set to "Control Panel \\ All Items Control Panel \\ Account Manager"
This is if you have WordGroup!
If the domain network then look NTFS access on the balls ...
Question: Copy the folder over the network with all contents (xcopy and network drive)
Copy the folder over the network, with all the contents of XCOPY, and the network drive
Initial code
Copying Normal.cmd // file in encoding (866)
| Windows Batch File Code | ||
|
||
Result it works copies
Network Copy through - Network Disk M:
Copy Network file.cmd // File in encoding (866)
| Windows Batch File Code | |
The result it works copies the file
Problem Example: Network Copy via - M:
Copy Network folder.cmd // File in encoding (866)
| Windows Batch File Code | ||
|
||
The result does not work - Copy Flaout4 folder
Climbed the forums there is no information about this problem
Does anyone have a solution as a folder, with all the contents to copy over the network?
Answer: GENDALF_ISTARI.Obviously, at the time of copying the destination folder "E: \\ New path \\ Dude Folder \\ FLAOUT4 does not exist.
For this case, you need to use the "/ i" key:
Windows Batch File Code
Xcopy% old_dir%% new_dir% / i / e / h / y.And I removed the key "/ s", since the combination of keys "/ s" and "/ e" is equivalent to one key "/ E".
If you use a wired connection, select the tab. Ethernet and press the left mouse button on the Ethernet connection. If the Ethernet adapter is disabled, then the tab Ethernet It will not be available.
Network profile Publicly available or Private
If you are using wireless connection, Select the tab Wi-Fi And on the right side of the window, click the left mouse button according to your Wi-Fi Connection. If a Wi-Fi adapter Disabled, then tab Wi-Fi It will not be available.
In the next window, in the category Network profile Select the network profile you need: Publicly available or Private. Changes come into force immediately.
How to change network type (network layout) with using windows PowerShell.
You can also change the network type using Windows PowerShell. To do this, you first need to know the network interface number for which you want to change the type of network. with administrator rights, and execute the command:
"Open"
Interface number -NetworkCategory Public
where instead Interface number
Set - NetConnectionProfile -InterfaceIndex 2 -networkcategory Public
To change the network type (Network Location) on "Private", execute the command of this type:
Set-NetConnectionProfile -INTERFACEINDEXInterface number -Networkcategory private
Where instead Interface number Specify your interface number.
In this case, the command will look like this:
Set - NetConnectionProfile -InterfaceIndex 2 -networkcategory PrivateAfter executing the command, the changes come into force immediately.
There are several types of location on the network.
■ Private network is used to work in home networks or in networks, users and devices of which are known and they can be trusted. Private network computers can belong to a home group. For private networks, network detection is included, which ensures the use of other computers and devices connected to the network, and also allows other users to access the computer from the network.■ Public network Used in public places (such as cafes and airports). This location is configured in such a way as to make a computer. "Invisible" For other users and increase its protection against malicious software in the Internet. The home group is not available in public networks, and the network detection is disabled. This option should also be selected if direct Internet connection is used without a router or a mobile high-speed connection.
■ The location in the domain network is used for domain networks, such as those that exist in the workplaces in organizations. The location of this type controls the network administrator and cannot be selected or changed.
If you do not need general access to files or printers, the safest option is Public network