Connecting the Wi Fi Fi Amplifier TP LINK. Select Wi-Fi Amplifier for Home and Office

Modern wireless routers allow Wi-Fi signal to cover significant spaces, however, some users face a problem attenuation Wi-Fi signal in remote rooms of a large apartment or cottage.

Of course, you can buy an additional router and expand the network. But TP-LINK offers cheaper and convenient way Make it using a compact device, which in the West was called "Range Extender".

Below is its description and manual for connecting, setting up and operating.

Principle of operation

Often in our country, this device is called the Wi-Fi amplifier, which does not quite correctly reflect the principle of its operation, as it does not gain the signal, and creates an additional network associated with the main network transmitted by the router connected to the Internet.

Therefore, more correctly such equipment is called repeater, repeaters or repeaters.

It happens that the house has a well-running router, but in some rooms removed from it the Wi-Fi signal is weak or absent at all.

For example, there is still in the living room, and in the bedroom already the signal disappears. In this case, you just should insert the repeater into the outlet and set it up. Thus, it is possible to cover significant spaces of even large private cottages.

Instead of buying an expensive wireless router or screw more powerful antennas to it, you can simply install repeaters in the right rooms and the problem will be solved.

The repeater accepts Wi-Fi from the main router and transmits it, expanding the Wi-Fi signal coating zone.

As a result of Wi-Fi, one (the access code to it does not change, as the name of the network itself remains the same for the default), which is configured in the main router, and all the settings for the repeater are actually reduced to pressing the WPS keys of the router and repeater.

If we talk simple wordswhen a person with connected to wireless network the router is a laptop in the living room, but suddenly he wants to move the laptop to the bedroom, then after the transition to this room, the computer in automatic modewill switch to the reception of Wi-Fi from the repeater, and the person will still continue to work on the Internet without even noticing any changes.

The same will happen with any other devices connected to Wi-Fi: smartphones, tablets, netbooks, etc.

Contents of delivery

Traditionally, the review of the device will begin with the configuration. Packaging is made in bright friendly colors. On the box except the image of the repeater, its main characteristics are reflected.

The list of component elements going along with the repeater is as follows:

1. Patch cord;
2. Instructions on paper and electronic media;
3. Warranty card.

The adapter for connecting the device to the power grid in the kit is missing, since the structural feature of the device is the built-in power supply unit.

It is possible to install the device itself directly in a 220V or extension (pilot).

Description

The device has support for 802.11b / g / n networks in the range of 2.4 GHz. The device is equipped with a chip "Qualcomm Atheros AR9341". Externally, the device is compact, actual dimensions in centimeters are: 11x6,5x7.5.

Glossy light plastic of the case looks concisely in any atmosphere. Even in a dark place, the instrument owner can easily find the WPS key, which is surrounded by the traffic lights in the perimeter.

The device is equipped with a port 10/100 Mbps. This allows you to connect, for example, a computer without Wi-Fi-Module.

Next to the Internet jack there is a recessed "Reset" key.

Connection

You should pay tribute to the manufacturer and praise for the simplicity of the connection process. TP-LINK TL-WA850RE setting does not cause difficulties even with novice users. TP-Link has invested in a box with the device two copies of instructions in English and Russian, and also duplicated their electronic versions on the CD.

If the router is equipped with the WPS function, then all the connection is reduced to the presses of these buttons on the instruments.

To connect, you need to perform such sequential steps:

Note: After the actions performed, you can turn off the repeater from the electrical outlet and insert it into the outlet in another room, the connection to the router is already auto-mode and from the user already performing additional actions with clicking on WPS.

The device saves the network in its memory to which it has previously been connected.

Setting

In cases of absence of the use of the WPS key, you can use the device configurator and enter the desired parameters for connection using Patch Cord.

To get to the Web configurator, you should write "http://tplinkextender.net/" in the browser and clasp "input". The advantages of this method should include the ability to set an individual network name in the board panel.

Control Panel

The Web configurator is not Russified, so it remains hoping that in the near update the manufacturer will take care of Russian-speaking clients. The Status tab reflects the status of the device, modify the firmware, the settings of the main network, addresses, speed indicators and statistics.

In the WPS tab, you can configure the connection.

If the repeater is planned to be applied in other networks, it is advisable to adjust profiles.

This will significantly speed up the compound procedure and will provide mobility.

The "Wireless" tab contains six sections through which it is produced. thin tuning Wireless network operation parameters.

One partitions are devoted to information about the connected devices. The statistics on the reception of data on the wireless network are also reflected here.

An example of the configuration process via Web interfes

Due to its own control panel experienced users Can finely configure this compact device. You can use two methods for opening a web interface: via Patch Cord either via Wi-Fi.

The address, password and login to enter the configurator are indicated in the accompanying documentation, as well as on the body of the device itself (in the rear part, from the side of the plug).

After opening the main stand interface, do the following:

Validation

The test of streaming broadcasts revealed that the device supports the standards specified in the accompanying documentation, however, the main router affects the stability of the joint and, of course, the supply service provider.

Wired connector is allowed to be applied not only to connect PC, but also TV, consoles, players.

According to the results of the completion measurements, it was revealed that the compact device consumes about three watts per hour.

The device supports working with all modern platforms, including mobile operating systems.

By default, the firmware "3.14.4 BUILD 130313 REL.63007N" is used.

To check the work as a source of a wireless signal, the ZyXEL NBG-460N router was used. It was installed at one end of the apartment, and the repeater in the opposite part (the direct distance between them was at least ten meters, while interior overlap was present, appliances and furniture).

Through the device control panel, the name of the repeater network was assigned, differing from the translated head router. Measuring rates of reception and data transmission rates were carried out through the SpeedTest.Net service.

Two different smartphones were used on iOS and Android platforms.

As a result of measurements of speeds on different deletes The device has shown that at a distance of ten meters there is a satisfactory quality of reception and transmission, but then sharply begins to decline.

According to the results of the measurement on the street (at a distance of more than 20 meters from the repeater), a significant signal attenuation was revealed, but even when removing up to 30 meters, access world Wide Web In both smartphones, it was, although the reception speeds have already decreased significantly.

Reset

There are two methods to return the repeater parameters to factory:

1. By pressing the "Reset" button, it is located directly on the device;
2. Via the device's Web configurator.

1 method

The following actions must be executed:

2 method

Guided by instructions from the "Setup" section of this manual, enter the Web Configurator and make steps:

Solution of problems

In the event of difficulties with connecting the repeater to the router or output in global Network After the connection, it most often helps a simple movement of the repeater closer to the Wi-Fi signal source or rollback of device parameters to the factory state and re-connection.

The parameter reset methods said in the previous paragraph of this instruction "Reset settings".

If you cannot establish a connection via the "WPS" keys, it is recommended to use the WEB interface of the device and configure the connection manually. More details about this procedure are described in the "Settings" section.

Technical problems are better to solve through masters service Center Companies, so after purchasing a repeater, it is necessary to maintain all accompanying documents and a warranty card.

For example, a router is installed in the house or apartment, but in the far room, the laptop, the phone or tablet has a weak signal level. At the same time, so weak that the connection is sometimes impossible.

You can of course connect to a laptop more powerful Wi-Fi adapterBut what to do with the phone and tablet? In this case, the access point will help us, which supports the mode of operation - repeater or repeater. Access point TL-WR740N. will connect via Wi-Fi to your router and transmit wireless signal Next, how can this phone, tablet or other client device can do. With TP-LINK repeater and you can strengthen Wi-Fi Signal For your devices.

Adjust access point in Wi-Fi mode Repiuter

TP-LINK router Connects to a computer or laptop using a twisted pair cable. Power connects to the access point using the power supply. Settings network card Must be extended by default.

After adjusting the access point, the cable from the computer to the access point will be turned off.

Open internet Browser Explorer, Mozilla, Opera, Chrome or any other, and enter the address 192.168.0.1 . This is the default, it can also be viewed on the bottom of the router.

In the next window, enter the username. admin., Password admin..

Open Menu: Wireless Mode - Wireless Settings - Enable.

After - a group of text fields will appear below. Press the "Search" button

In the window that appears, click "Connect" opposite the WiFi network to which we will connect.

Select the type of encryption: open, or. In the last column fit password from WiFi networkto which we want to connect. And also set canal number, just like the Wi-Fi network with which we want to create a WDS connection.

After that, save the settings by pressing the Save button. If the WiFi network channel is different from the required, you will receive the following remark:

The channel of your access point does not coincide with the channel of the access point, which is related to the bridge, do you want to change your channel to the access point channel connected by the bridge?

I confirm, and the channel must automatically be changed to the correct one.

Now it remains only to customize wiFi network security settings. Go to the menu: Wireless Mode - Wireless Protection. Select the type of encryption and password that is used on the router to which our TP-LINK repeater connects. In our case, encryption was used.

Please note if you are used on the router, then in the fields Type, Wep Key Format, WEP KEY, KEY TYPE Settings should be specified similar to the router to which the access point will be connected. Otherwise, the TP-LINK repeater cannot be connected to the router. Do not forget to indicate correct region In which your router is located. If the source router is in the Channel column another number, the repeater cannot connect to the router due to incorrectly specified security parameters.

After setting the security settings, save the Save and reboot the settings with the button.

WDS Mode Activation Check

Find out that the TP-LINK repeater can connect to the router in the menu condition.

Open menu and see the connection settings. In field Name () - Should appear name wifi. network in the field MAC address - poppy router distributing network as well canal number And other parameters.

Connecting equipment to Wi-Fi network with WDS

You can connect to WDS Wi-Fi Network smartphone with Wi-Fi, tablet or laptop. To connect a laptop to a Wi-Fi network, in the lower right corner of the screen we find the control icon Wi-Fi connections. In the list, choose our Wi-Fi Network And click the "Connect" button.

Enter the password to connect to the Wi-Fi network, which is set in the router settings. After that, the laptop will connect to the Wi-Fi network.

Checking Device Connection to Wi-Fi Repiter

After connecting any wireless device (laptop, phone, tablet) to Wi-Fi network, check that the device connected to the repeater, and not to the router. To do this, on the access point, you open the Wireless Mode Menu - Wireless Statistics and see the devices connected to the TP-LINK repeater.

If there is no Mac address in the list, and the Internet works on it, the device connected to the router, because at this point the router signal is better than the repeater signal. Put the access point in Dali from the router and connect next to it. If the device still failed to connect to the access point, check that the access point is connected to the router and it is properly installed by the encryption type and password in the security settings.

Probably, the situation is all familiar when the apartment does not manage to connect to the home network - so weak signal. Or when several people are sitting in the home network, because of what the download speed drops significantly. The wifi signal repeater is a wonderful way to cope with similar small neural. What it is and how it works, you will learn from this article.

What is the repeater?

Repeater Wi-Fi, also known as an amplifier, repeater or repeater, is a device that helps to a significant increase in the coating area of \u200b\u200bthe network signal. It takes a signal from the router and provides its further transmission. You just need to allocate an excess socket under it and understand the network settings. Please note that the Wi-Fi repeater is needed in the place where the main signal is still enough. At the very least, make an initial installation and setting in the active coating area, and then you can move from the outlet to the outlet to try all the relay options and find the best for your room.

The principle of work repeater

Why do you need a repeater Wi-Fi? The fact is that if you decide to go withdraw and just increase the power of the router signal, so that "caught everywhere," then there will be no good for anything good. The consumption of electricity will increase, the device will overheat, and as a result, everything will end the breakdown.

Another single remark: As we noticed above, the repeater is often called an amplifier, but it is not quite true. WiFi-REPEATER does not enhance the available signal. He only spreads it to a large area. Purchase of the repeater will not strengthen anything and will not make your Internet super-fast, but rather, on the contrary, slightly reduce the speed due to the creation of another point of distribution of the signal. But this should not be alarming - we will consider the effect of the repeater to the speed below and explain in what cases it will be insignificant.

Do you need a repeater?

Before you go on the purchase of a repeater, think: and maybe there is another solution to the problem. It is not even about mentioned above increasing the signal power, and it is rapally about what the apartment is located in the apartment. The closer to the geometric center of the space will be your device, the even the signal is broadcast in all directions. Also check which direction the router antenna is directed. For horizontal signal distribution, it must be directed upwards.

What does the repeater Wi-Fi look like?

Meet different models amplifiers. Some dimensions and shape are like something charger for mobile phone, only without wire. For example, the model in the figure below looks like a compact curved plate with a plug for a socket, LED indicators, a port for an Ethernet cable and a reboot button.

There are models that differ little from the router in their form.

Typically, the delivery also includes instructions, an Ethernet cable and drive drivers.

Easier simple: WPS button

On most modern devices there is a magic WPS button (or QSS on some models), which ideally is designed to significantly simplify life, but in real life, on the contrary, sometimes it creates interference in the use of the network.

If on the router, and on the repeater there is this button, then everything you need to do is first press it on one device, and then on the other. A few minutes of waiting until the Wi-Fi repeater and the router will find each other, and voila - you can work. But there are recommendations where they advise you to configure the repeater manually by selecting a specific WiFi-network to, first, reduce the number of failures in relaying, and secondly, to protect yourself. WPS technology is easily leaving. Therefore, it is often advised to disable this mode in general if you do not have to connect new devices often.

Already pay attention to that sometimes the WPS button is aligned with the reload function (Reset). It all depends on the duration of the press: if you hold your finger on the button longer, then instead of turning on the WPS, restart the repeater, and all the settings you set are reset.

How to configure wi-fi repeater manually

For a more stable signal, it is better not to rely on WPS, but to register the entire configuration manually. Connecting Wi-Fi-Repiiter is actually even easier than setting up the router. First of all, turn on the Wi-Fi repeater into the socket and connect to it through the computer using the cable or wi-fi. Then open the browser and in address line Enter the IP address, you will find it on back side Repeater. The screen will be updated, and the form of authorization will appear. There you enter a login and password: if you have not changed anything in the router settings, then the default is admin / admin. A page with settings will open.

Here you can somehow call your repeater Wi-Fi or leave it with the factory name. Final stage - We enter a password from your Wi-Faya in the required field.

What happens with the speed of the Internet?

Sometimes there are doubts about the feasibility of buying a repeater. The main argument is the signal propagation range increases, but the total speed of the Internet falls. The practice of using repeaters shows that speed fluctuations occur: any additional link in the "distribution" chain of the Internet will reduce the flow. However, the decrease is usually not so much to significantly affect the signal power, and is largely determined technical characteristics Devices in a chain. In other words, the "bug" and "brake" the Internet will not be if your devices initially catch the signal.

Router as an alternative to the reference

There is a commodity opinion that if at your home there is an unnecessary, but working router, then it is not necessary to acquire a wifi signal repeater. Many models are created so that they can perform the repeater functions, the main thing is to configure them correctly. This is a longer process than setting up a conventional repeater, but quite fulfilled on its own. Note that it is easiest to establish a connection between two devices of one manufacturer - more chances that routers will notice each other and will work smoothly. The brand also depends on the process of configuration.

First, the router you are going to use as a repeater Wi-Fi will need to be connected to a computer using a wire. Then it will be necessary to check the adapter parameters (through the "Network Management Center and common access", In which you can get from the" Control Panel "). The device must be set to the device 192.168.1.21 from the subnet mask 255.255.255.0.

Then, as when setting up the repeater, you will need to drive the IP address from the bottom of the device to the address bar. Use Standard Login and Password again - Admin / Admin. On the page that opens, you will need to find the "Wireless Mode" tab and go to the settings. We are interested in the "Enable WDS" option - so we will create a network that will unite two router. You will also need to change the IP address of the router, which will act as a repeater, so that you have the opportunity to enter the setup mode. You can just change the last digit or add zero after it.

After that, you need to open a list of available networks, find the necessary, select it and enter the password. By the way, do not forget to protect the network on the second router so that the connection to it is also carried out using the password. To do this, we go to the "Security Settings" and in the column "PSK encryption key" we enter our password and persist.

Now the router works as a wifi-repeater. You can disconnect from the computer and install in the right place.

Check the connection status

After you configured the repeater or router in the repeater mode, you need to check how Wi-Fi-repeater works and how well it captures the signal. It is advisable to check on all your devices - laptops, tablets, phones - whether they see the network that repeater distributes, or continue to connect to the main router (for this you can register different names in the settings). Also check whether you installed the Wi-Fi-Signal repeater for the router, if you achieve your goal to improve the quality of communication.

To do this, you can not just walk with a smartphone around the apartment and read the number of sticks in the connection, as everyone is usually done. Download one of the special applications to your device, which is able to check the signal power.

Note that if you need to expand the coverage of the network to a sufficiently large area, and even in different directions (for example, the floor is lower and in the neighboring room), then, most likely, you will have to buy two repeators.

To date, the number of points of various manufacturers is quite large, but for the most part they represent themselves as many say, a box with antenna. Such a box is quite difficult to hide, even though it is not big sizes, and appearance Many confuse, alternative to the B-LINK WA850RE access point.

The TP-LINK WA850RE access point is a small, externally quite attractive, wireless device that can expand the reception radius of the existing Wi-Fi network using the Ethernet port can act as wireless adapter To connect wired devices (computer, TV, home cinema, etc.) and at the same time maintains speed up to 300 Mbps.

First of all, I propose to disassemble the purpose of the button on the TP-LINK WA850RE housing and understand what indicators show.

Large button (Range Extender) is designed for fast settings Access points. If we speak essentially, then in order to increase the coverage area wireless Wi-Fi We need to click on the WPS button on the router and press the Range Extender button for 30 seconds to press the WPS button on the access point.

EVERYTHING... tP-LINK Setup WA850RE has been completed on this, is it all simple. Now your point extends the Wi-Fi signal zone and, if you connect an Ethernet cable - TV, computer, etc. You detect that they connected to the network. The Range Extender button allows you to configure the access point without connecting to the web interface, but how to understand whether the access point works, which signal level accepts, etc., all this information can be obtained by looking at the indicators. I propose to disassemble that each of the indicators means.

Re (Range Extender)

Lights - Range Extender is successfully connected.

Flashing - there is a connection to the router.

Not lit - the access point is not connected to the router

Wireless.

Burns - wireless mode included.

It does not burn - the wireless mode is turned off.

Light - TP-LINK WA850RE included

DO NOT LIGHT - Access Point Disabled

Ethernet

Lit - The device is connected to the Ethernet port.

Flashing - data transfer by the Ethernet port

Not lit - no device is connected via Ethernet

Signal Strength

Lights (from 1 division to 5) - shows the current power of the main router signal.

It does not burn - no Wi-Fi signal from the main router or the access point is not configured to the robot with the router.

For those who do not have the WPS button to quickly configure or who wants to smoothly approach the access point setup. There is a web interface. With it, you can update the TP-LINK WA850RE firmware, configure the Wi-Fi connection with the main router and a lot more.

Connect to web interface TP-LINK WA850RE.

In order to get on the web interface of the TP-LINK WA850RE access point, you must connect it to the power supply (220V) and using network cable (It comes in the kit) Connect to a computer / laptop. Next in the computer / laptop to configure automatic receiving network settings , open any browser (IE, Chrome, Mazzila, Opera) and in the address bar Register the address http://tplinkextender.net. In the login string, enter Admin, Admin password.

The first setup window will open, click the "Next" button.

After not long scanning, all Wi-Fi networks will be available to which you can enhance whose signal. Select the necessary network, check the checkbox opposite it and click the "Next" button.

After that, you must select the type of protection used on the router, below enter a password for connecting to a Wi-Fi network and select - use the same name as the main Wi-Fi network or other (I recommend left to leave the default one to use the same name).

After that, a window appears with the resulting settings. Check that the specified settings are correct and click the "FINISH" button, otherwise go back and correct.

As a result, you will open the status window from which you will understand: you connected to the main network or not, which signal level and which IP address received an access point (hereinafter you can use this IP address to connect to the web interface).

Quick Setup - Quick Setup mode.

Profile - All connections profiles are stored here. Suppose you used an access point at home, then they gave a friend, he configured it to himself, then again gave you, if he did not drop the settings to factory, then just stuck the device in the outlet, everything will work, as the profile of your network (network name, Password) is preserved at the access point.

Wireless - Wireles Setting - settings are specified for connecting to the main network (region, network name).

Wireless - Security - indicates the safe connection method and the password is prescribed there to connect to the Wi-Fi network.

The rest of the items I will describe below in more detail.

TP-LINK WA850RE firmware update

For more sustainable work TP-LINK WA850RE, I recommend to update the firmware. First of all, it is necessary download firmware for TP-LINK WA850RE from the official site. After saving the archive, unzip it, in the folder must be: Focus File ( expansion bin) and a brief guide.

After that, go to the Internet Access Point Interface and go to the "System Tools" menu - "Firmware Upgrade". Next, click the "Overview" button, select the firmware file and click "Upgrade".

A confirmation window appears, click "OK".

After a few minutes of waiting for the firmware update, you will fall on the web interface TP-LINK WA850RE.

Password change on TP-LINK WA850RE

To enhance security, I recommend changing the password to connect to the web interface of the device. To do this, on the device's web interface, go to the "System Tools" menu - "Password". After that, enter the old login and password (Admin, Admin) and the new login and password. I recommend using a complex password consisting of capital and uppercase letters, numbers and special signs (! "@ #). Username and password should not exceed 14 characters and should not contain gaps!

This password is used precisely for connecting to the web interface and Wi-Fi is not connected.

Overview, firmware update and setting TP-LINK WA850RE.

If you have any questions you can ask them in the comments.

Wi-Fi repeater (also called a repeater or repeater) is a wireless device used to expand the network coverage. With it, you can connect to wireless Internet In places with a weak point of signal from the router. The repeater in this case will receive a router signal, and relay to its local network clients.

Choosing a Repeater Installation Places

The maximum effectiveness of using the repeater is achieved when installing on the boundary of the stable Wi-Fi reception from the router. When choosing a location, take into account the layout of the room in which the repeater will be used. You should also pay attention to the location of wireless gadgets, which will be connected and Internet access.

During the search for the optimal place to install the repeater, perform measurements of access speeds. To do this, you can use online services, such as Speedtest. To install repeater, the same recommendations are relevant as for others. wireless devices. Do not place a repeater near large electrical appliances that may interfere with the network. If there are antennas, send them perpendicular to the plane in which the propagation of radio waves is required.

Enable Wi-Fi Repeater

Most repeaters have a built-in power supply, so turn on directly into the outlet. This design allows you to get rid of unnecessary wiresSince the cable connection of the power supply and device is not required. The negative side is to reduce mobility. Installing the repeater at a considerable height is possible only when using the extension or transfer of the outlet.

To turn on the device, simply insert it into the outlet. Almost all models of repeaters begin work immediately after the start of supplying power. But if your device has a separate power button, press it. On the start of operation, the LEDs on the housing are indicated. The values \u200b\u200bof different indication modes (continuous luminescence or flicker) can be clarified in the instructions.

Note! A piece of repeaters is equipped with one or more connectors for connecting a network cable. With their help, you can connect the Internet on computers that are not equipped with a Wi-Fi module.

Connection using WPS

If there is a WPS button on the device, press it to activate the Wi-Fi connection mode without selecting the network and enter the password. After that, press the same button on the router, no later than two minutes after the Wi-Fi Protected Setup is turned on. With a normal signal and the absence of technical difficulties, the repeater will connect to the wireless network and starts to duplicate it.

On some routers there is no such button. To connect to them, the WPS is used by the router setting web interface. You can open it in any browser by typing the IP address of the router in the address bar. As a rule, it is indicated on a separate sticker located on the bottom panel of the device. On the same sticker there are data for the entry: the name of the standard account and password.

Tip! Connection is also possible with entering the repeater PIN code into the adjuster of the router. The code can be clarified on a box or separate liner.

Training Video: Quick Repeater Connection

Configure the repeater through the web interface

Point extra options Or configure the network when using a router without WPS, you can in the administrative interface of the repeater. As in the case of the web interface of the router, the input and setting is performed through the browser. Authorization data is also indicated on the sticker, liner or instructions.