Menu
Is free
check in
the main  /  Multimedia / Why windows 10 does not see the Canon printer. Connecting multiple printer

Why Winds 10 does not see the Canon printer. Connecting multiple printer

Good mood to you all! Now together with you we will talk about how to connect network printer in Windows 7 and 10. After all, we have successfully discovered general access by local network.

And now, naturally, we want to print on it with might and main, for example, in the next room. Agree that this is a very convenient scheme in case your own printer is not.

So, friends that we have on this moment? But what. Our has a printer that is connected to another computer with using USB. cable. IN concrete case This will be a Multifunctional device of Samsung:

Now we need to connect to it from a remote PC, which, in general, is located in another room. So let's go to the point because it will be very interesting. All operations will be performed in Windows 10.

First of all, you need to proceed to the "Control Panel" and find the "Devices and Printers" tab. How to do it was considered in detail in a recent article (reference at the beginning). If you did not read, we recommend doing it now.

Then we find the "Adding Printer" item and click on it:

The process of detecting new devices will be launched. But in our case, nothing was found, because we choose the option "The required printer is missing in the list":

In the next step, select the string "Add a local or network printer with parameters specified manually":

Now in the "Use Existing Port" column, you must select the network path to the desired device. A clear example of this is shown in the picture below:

After the installation process of the selected printer drivers is started. If the proposed list of the desired model is not, as in our case, it means that we click on "install from the disk":

And now you will have to strain a little. And the thing is that now you need to download drivers under specific model On the site manufacturer's device. After that, you should unpack them on hDD Computer:

In the next step in the driver installation window, specify the path to just downloaded files and see the list of models we need:

Ultimately, after all of the above wanders and wandering on dialog boxes The operating system, it will be possible to return to the original tab "Devices and Printers" and, if you wish, activate the "Use By Default" option:

Now any task sent to print will immediately go to this printer. So let's check it as follows. Select the "Printer Properties", and then on the General tab, click "Trial Print":

After that, the gallop run into the next room and look at the result. In general, friends, it's so easy and simple, together with you they answered the question of how to connect a network printer in Windows 7 and 10.

If suddenly you have left some questions or misunderstanding the essence this processBoldly set them out in the comments to the publication. And in conclusion, we suggest you pass a very interesting test.

Installing the printer in the Windows 10 operating system is usually a simple process that will take no more than 10 minutes of your time. After installation, you can immediately begin printing your document without any problems.

The most common way to connect the printer to the PC is a USB cable, also connect peripheral device can be in wi-Fi networkif technical capabilities allow it. Below we will consider in detail both options.

The process of adding a printer to the system can be divided into several steps:

Step 1.Connect the printer to the computer using a USB cable and turn it on.

Step 2.Open the "Settings" item in the Start menu.

Step 3.Left-click on the icon with the inscription "Devices".

Step 4.On the "Printer" tab, click on the "Add Printer or Scanner" button.

Step 5.In the event that your printer is detected, click on it and follow the instructions on the screen to complete the installation. If you do not see the printer in the list, click the "Find Printer" link - follow all instructions in the Troubleshooting window that opens.

In addition, you can install the drivers manually, after downloading them from the manufacturer's official website.

Adding a wireless printer

The installation algorithm for the Wi-Fi printer depends on the specific brand and the device model. Nevertheless, most modern printers independently detect the home network and automates the installation process. Consider the script when this does not happen:


Note! In some cases, it may be necessary to temporarily connect the printer to a computer via USB to install the device software. In the event of a problem, first of all, make sure the printer is relatively close to the PC and not too far from the router (router). In some printers, the Ethernet connector is embedded through which it can be connected directly to the router - the setup management occurs through the interface of the Internet browser.

Adding a shared printer

Home function windows networks "Homegroup" allows you to use the same printer from multiple computers and exchange files between them within one local network. Below we show how to create a common group and connect the printer to it.

Setting up a home group

Skip this step if your home network is already configured. In the event that you are not sure, follow steps 1 and 2 to find out the current network status.


Connecting a printer to a home group


Installing the printer in the Windows 10 operating system is not a challenge task. Follow the instructions and you will definitely work out!

Video - how to install a printer on windows 10

Check out these frequently asked HP printers and support in Windows 10.

What types of drivers for windows 10 are available?

Depending on the printer, a number of drivers can be accessible on the HP website or through Windows. If the delivery of your printer has an installation CD before installing, make sure that it is compatible with Windows 10.

HP provides full-featured print drivers for many printers. These drivers provide full access All functionality of the device and contain a number of useful programs for using the printer with maximum efficiency.

The basic version of the driver is smaller than the file than the file. full version, Therefore, loaded faster. It provides basic print functions. However, in the basic version of the driver installed on a multifunction printer, the programs needed to most users are not available to perform the copy and fax processing tasks on the computer, as well as the scanning capabilities.

HP Enterprise Driver

Solutions for enterprises are part of a complete set for installation provided by corporate clients. WebPack packages contain installer, print driver and scan driver (depends on the printer).

This driver allows you to easily install and delete along the printer, automatically determining how the drivers are supported in each device. PNP software determines the equipment during the original installation, determines the changes in the PNP equipment between the system loads, and also responds to equipment events in the management environment, such as the room in the docking station and extraction from it, as well as adding or extracting the device.

Universal Driver HP Prints (UPD) is an intelligent print driver that supports various HP LaserJet and MFP printers. This advanced print driver can define HP printing devices and perform an independent setting in accordance with the capabilities of the device (such as two-way print, color printing, coating, etc.). Universal HP Designjet Print Drivers You can find on the HP Designjet Universal Print Driver page.

Designed by Hewlett-Packard as a print protocol, the PCL language has become actually a sectoral standard. The extended PCL 6 driver is characterized by a new modular architecture that can be easily changed for subsequent HP printer drivers and provides a faster return to the application, accelerated printing complex graphics and efficient transmission of data streams to reduce network traffic, improved printing capabilities in the accurate display mode WYSIWYG , improved print quality and full backward compatibility.

Drivers available through Windows 10

    Driver from Windows Update

    For some printers, drivers are installed through the Windows Update Center. If the Windows Update Center is involved on your Internet connection computer, it is automatically activated when the printer is connected to a USB computer or network. He will search the most recent versions Printer Drivers on Center Website windows updates. If the driver on the Windows update center website is more functional than installed driverThe download will be downloaded and installing this driver.

    Built-in Windows (in-OS) driver

    Integrated Driver operating systemis a basic driver included in the operating system. Downloading or installing programs from the HP website is not required. If such a driver is available for the printer, you have at least basic printing capabilities via USB or network connection.

How to install drivers from HP website?

Open HP Customer Support page to download and install the recommended or preferred print driver. Depending on the printer, full-featured, basic, universal or plug and play drivers can be available.

Note.

Instead of downloading, you can use the installation CD if it has windows Driver 10.

    Turn on the printer.

    If necessary, disconnect the USB cable from the printer. During software installation, if necessary, a request for connecting the cable will appear.

    When displaying the page Identify the device to start work, Select the printer, enter the printer model number and click Submit.

If the computer stopped seeing the printer, then in this case you have to try to find the source of the problem. So why doesn't the computer sees the printer? The problem of this kind is faced almost every user of the office equipment and first should be checked if the printer is connected to the computer.

Most often it is because of the poor contact between the PC and the printer, the computer does not respond to the connected equipment. In this situation (if the connection is done via USB), you should remove the cable and insert it again to the place, as well as check the reliability of the existing connection on both sides. Make sure the USB connector in which the wire is inserted is a worker. During the inspection, connect the cable alternately to all available in system block Connectors, pre-disconnecting the mouse with the keyboard. Perhaps some of the PC connections will eventually respond. Otherwise you have to contact service center, After all, if the printer is not determined, maybe the problem is in it.

Problem with driver

If the computer or laptop does not see the printer and this problem is not associated with a USB cord, perhaps the problem is "broken" or "flying" drivers. It is also possible you just forgot to install them. If the situation is related to your forgetfulness, then download special program On a PC from the installation disk that you purchased with the printer. When installing, follow all instructions that will appear in front of you on the screen. If there is no installation disk, then you can find the appropriate drivers on our website in the download section. You can download them from the official website of the manufacturer of your printing device. At the same time, take into account the model of the device and the OS installed on the PC.

But quite often the problem appears with existing drivers. In this case, its reason lies in the operating system installed on the computer. In such a situation, it also happens that the laptop cannot even detect the connection to the printer installed on Wi-Fi. Why is the printer not visible in a similar situation? The reasons for this problem can be in the router not configured on the reception, not paid for Internet provider services, not performed settings and possible blocking home network by antivirus. Another reason that the PC does not see the printer via Wi-Fi may be the next - the IP address was not automatically entered. So, if the driver is "buggy", then to solve the problem, first of all, you need to go to "Installing and Deleting Programs", find the name of your printer and remove it. Next, you need to go through the "Device Manager" to the "Drivers" tab, select the desired printer model and delete it. After that, the driver of the printing device is re-installed.

Viruses and system file recovery

If the computer does not see the printer and it does not normally connect to the device, then be sure to check the PC to viruses and other unwanted programs. In addition to antiviruses, it is advisable to use for this purpose special utilitieswho have a narrow specialization.

Perhaps in your OS during operation or under the influence of malicious applications were damaged system files. Try to restore anyone affordable way. After the work done, install all updates that are important for the system and check whether the actions have helped solve the main task. If nothing really changed, it would be nice to reinstall the operating system.

Other possible reasons

Another problem may be the fact that completely different printing equipment has been chosen on your computer "by default". This reason belongs to the category of the most common, but it is very easy to solve it. To do this, after installing the necessary printing device, click on its right-click icon, then check the box next to the inscription, implies the use of the default equipment. If the printer still has not been determined, i.e. It is not visible to the computer, then you may have a service that is responsible for automatic printing on your PC. Go to the "Administration" menu through the "Control Panel", then open the print queue manager. Next, find the "Startup Type" and put on the "Auto". In general, in this case you will not need to do anything.

In addition, some users, due to their scatter, simply forget to click on the button on the printing device. It is usually located on the side or rear, i.e. Not in a convenient place. Consequently, before proceeding to the consideration of the reasons described above, you should make sure that the device is really turned on and the indicator is on with its enclosure.

Thus, if you are interested in the answer to the question of what to do if the computer does not see the printer, then you should not immediately get out for the services of the masters. You can cope with this relatively easy problem with a competent approach yourself. In the service center, you should appeal in the most extreme case if nothing of the above helps you and the printer in the network is never visible.

printeros.ru.

Why doesn't the computer sees the printer - the main reasons

Why doesn't the computer sees a printer connected via USB? Unfortunately, the universal response to the assigned question does not exist. The reasons for its occurrence there are several, ranging from bad contact uSB interface, ending with the software failures of the operating system. In this topic, we will lose all the most common causes of the appearance of such a problem and give practical advice By eliminating it.

Cause # 1 - Bad USB Interface Contact

Not to say that this reason is the most popular, but it takes place. As a rule, an interface cable, which is included with the printing device, is difficult to incorporate, exploiting it for its intended purpose and properly. This will require inconceivable manipulations with it on bends, gentlements and other mechanical effects. But agree, the printer is a stationary device requiring one-time connection. Therefore, the wire break in the cable is unlikely.

Another thing, the loss of contact in the computer connector. But again, if the computer has stopped seeing a printer at some point, it is better working better, and you did not make any actions to reinstall, then with more probability it is possible that the reason is also not in this.

Nevertheless, before finding out why the computer does not see the printer, making radical measures, this is probability must be checked.

To begin with, just change the cable in the connectors of both devices. If the problem has not disappeared, then connect the printed device via USB to another PC or laptop with the same cable. In the case of its successful recognition, as a new device, it can be concluded that the reason for the most likely of your PC software.

Cause # 2 - Not that device is worth the default

The reason why the computer does not see the printer can serve as not one, but two or more printed devices, which is relevant for the local network, or when installing drivers, the operating system simply did not assign the default printed device. And in that and in another case, the problem is solved simply.

I give an example on Windows 7. Open the Start menu and select "Devices and Printers" menu. Next, in the list of displayed devices, select the desired to us. It does not matter the network is a printer or local. Click on its label with the right mouse button and in the appeared context menu Click to "use by default".

After performing this procedure, the selected printed device will become the main one.

Cause # 3 - no drivers

No drivers. If you just purchased a printed device, it is most likely a specialized specialized software. We are talking about drivers. This software is recorded on the CD disk and comes with the device. Simply insert it into the drive and follow the instructions of the installation wizard. There is nothing complicated in this procedure. At the end of the installation, the device will be fully ready for operation.

Another thing if the drive with the drivers is lost, there is no drive in the computer or does not work the drive, or the driver is simply not compatible with new version Operational windows systems. In any of these cases, you will have to download drivers from the official site of the manufacturer of the printed device and install them as described here.

Cause №4 - program failure

There are no rare situations when the computer does not see the printer due to the error of the operating system or the printing device itself. This problem It may appear after updating the operating system, penetration of the virus to a computer, etc. What to do in such cases? To begin with, to make sure that it is not the fault of the printed device itself, it is worth it to turn off. This is done by a switch, which, as a rule, is located on the rear wall of the device.

If the problem is not gone, then you should try to reinstall the drivers. The reinstallation process includes them full removal and installing anew.

Cause # 5 - not active print service

If the Print Manager service, and in Windows XP, it has the name "Print Queue Manager", disabled by default, the printing of documents will not be available, although the printer will be visible to the computer as a printing device. Therefore, if it is visible, but refuses to print, it is worth checking if this service is activated.

To do this, open the "Control Panel" section, then "Administration" and after the "service" (in some cases the path may be the following - "Control Panel" - "System and Security" - "Administration" - "Services"). In the list that opens, we find the service you are interested in and the dual press of the left mouse button open information about it. The "Startup Type" column should be "automatically", and in the "Status" column - "executed".

If there are other settings, we change them to these and click "OK".

Canal-it.ru.

The computer does not see the printer via USB: how to fix it?

The reasons may be set, starting from the unconnected cable and ending with the failure in the operating system. Consider common problems and options for solving them - from simple to complex.

Faulty connection

Sometimes a computer or laptop does not see the printer via USB due to a cable or port fault, as well as due to a bad connection.

  • Turn off the device cable on both sides, and then connect again.
  • Check if a USB connector is working. Try connecting another device through it: for example, a keyboard or mouse.
  • Try connecting the printer to another USB connector.
  • If possible, replace the cable.

Make sure the printer is enabled. Some devices have the power button on the rear panel or side, and users simply forget to press it. Sometimes the computer does not see the printer via USB because of such trifles, and the solution to the question takes literally one minute.

Failure of settings

Check which equipment is used to print by default. To do this, go to the control panel, then in "Equipment and Sound" - "View devices and printers". Click on the printer icon by right-click and select the "Use By Default" option. In some cases it turns out to be enough for the device to work correctly.

If the problem did not solve, click on the equipment icon twice, in the window that opens, select the "Printer" tab and remove the checkboxes in the "Suspend print" and "work autonomously". Also click on "Clear Print Queue."

If it does not help, go to the control panel, select the "Minor Icons" item in the "View" menu, go to the Administration tab and open the "Services". In the window that appears, you need to find the Print Manager and set the automatic startup type.

If the service is stopped, click also on the Run button, and then send a test page to print.

No Driver

It happens that the computer does not see the printer via USB due to lack of driver or due to incorrectly installed or outdated software.

Go to the manufacturer's official website, download from there the driver for your device and install it. Then restart the computer and try printing the test page.

If you accidentally installed an inappropriate driver, go through the control panel to "Device Manager", find the desired equipment there, go to its properties, then into the Driver tab and click on the Delete button. After that, install the new software downloaded from the manufacturer's official website.

Device malfunction

If the printer does not connect to a computer via USB and all the methods listed above did not help eliminate this problem, perhaps the problem is in the equipment itself. Try connecting the device to another computer or laptop. If the problem arose again, the best way - Take the printer to the service center so that experts tested and repaired it.

tonercom.ru.

The computer does not see the printer. What to do. 6 methods

According to the experience of our service center, users face a problem when the computer does not see the printer or stopped seeing it. Even if both devices are fully working and properly connected, the computer can still not recognize the printer. Consider methods for solving these problems.

Method 1. Read the serviceability

Most often, precisely because of the faulty connection, the computer does not respond to the printer. Therefore, you need to remove the cable on both sides of the printer and computer, insert it again. Check the connection reliability. Most printers require a USB 2.0 connection. In the computer wire, insert into the desired USB connector and that it has been working. During the check, you can turn off the mouse and keyboard. Connect the cable alternately to each of the connectors. On some printers, the power button is from behind or on the side of the housing, it must be pressed. The indicator on the printer should light up.

Method 2. Driver testing

Drivers may not work incorrectly or they are simply not installed. To install drivers, you need to use a disc that walked with a printer. If there is no such disk, the driver is better downloaded on the official website of the printer manufacturer as a request to search engine "Printer Model Download Driver. It is important to choose a driver package that fully corresponds to the printer model and your operating system. If the drivers work incorrectly, you need to reinstall them, first removing non-working.

To install the printer driver, you need to do the following:

1) Click the Start button and select "Devices and Printers".

2) Right-click the printer whose driver is required and select Printer Properties.

3) Click the Advanced tab.

4) Click the "Change" button and follow the instructions in the Wizard window of the Additional Printer Drivers window.

Method 3. Check is the printer installed by default device

1) You need to open "Start", select "Devices and Printers".

2) Click the right-click of the printer with the right mouse button and, if necessary, put a check mark in front of the "" use default "parameter.

Method 4. Check Automatic Print Service

1) You need to open "" Start "" - "" Control Panel "-" "System and Security" "-" Administration ".

2) Then double-clicking the left mouse button open the "" service "" "service" "" list "" "" print manager "and right-click in the drop-down menu" "Properties". The start type must stand "" automatically "and state" " Works"".

Method 5.New operating system

Connect the printer to another computer. If the computer works, then the problem in the operating system.

Method 6. Repair in the service center.

    experience of workshops;

    warranty for work done;

    If you want to save time and do not risk your device, the repair of the printer in Odessa is carried out in the service center IT service outsourcing.

itprofi.in.ua.

The computer does not recognize the printer for five different reasons.

Why doesn't the computer sees the printer? Many users are faced with such a problem. And with both devices, everything is in order. In addition, the printing equipment can be canceled on another PC. And when connected to the desired buggy. Not recognized by the system or gives errors. How to correct the problem?

From the source of the problem to its solution

What if the computer does not recognize the printer?

1) Check the connection service.

Most often precisely because of bad contact personal Computer Does not respond to connected equipment. Therefore, remove the cable - insert it again. Check the reliability of the connection on both sides.

Make sure the wire is inserted into the computer to the desired, working USB connector. Most printing devices require a USB 2.0 connection. At the time of checking, you can free other connectors (turn off the mouse, keyboard). Connect the cable alternately to each of them. Perhaps some connector will react.

The banal cause of invisibility of printing equipment - not pressed on / off button. Just forgotten. She is in an uncomfortable place (or behind, or on the side). Make sure you pressed it. On the case should light the light bulb.

2) flew the driver.

Or you forgot it at all. First, consider the situation with forgetfulness.

To the PC recognize the connected device, you need to download a special program. She is on installation diskwhich was in one set with a printing device. Insert the disk into the drive, execute the installation wizard instructions. Everything is clear there. Each next step is displayed on the screen.

If there is no disk, the driver will have to search on the Internet. See the manufacturer of your printer, model (all data is on the device case) and enter this information in the search engine string. Choose the official website of the manufacturer. There find the drivers section. Download the necessary. What to pay attention to? For compliance with drivers and utilities

  • model printing device;
  • the operating system of your computer (programs for 64-bit, 32-bit, etc. OS).

If you are asked to restart the PC, please.

Now you need to check the result of the work performed. How can I do that?

Go to the "Start" menu. Go to the "Printers and Facts" tab. There must be the necessary equipment.

But often everything is installed, but the problem is still there. It is inside the operating system. So, if the laptop does not see Wi-Fi, check first the settings of the laptop itself.

Consider the situation when the driver is installed, but it is buggy. Flew. The device can be displayed, but it does not work. Step by step instructions to eliminate the problem can be designated as follows:

1. Go to the "Control Panel" - "Installing and Removing Programs" (in different systems The path may differ slightly).

2. Find the name of your printed device and remove it.

3. Go to "Start" - "Printers and Faxes" - "File" (in the upper left corner) - "Server Properties" - "Drivers" (in some systems, the path to them lies through the "Device Manager").

4. Select the printing gadget model and delete (if the system does not show the desired name, delete everything).

5. Install the drivers again.

3) By default, another printing equipment is selected.

This is not a problem, but the problem. Very common, and therefore easily solved. By installing the desired equipment, click on its icon right-click and check the box opposite the inscription "Use by default".

4) The automatic printing service is disabled.

The "Start" menu is the "Administration" panel - "Print Queue Manager". Double-click Open the tab. We are looking for an inscription "Startup type". We put the "Auto" ("Automatically").

5) the failure of the operating system.

How to check it? Connect the printed device to another computer or laptop. If it works, then the problem is in the system. You will have to reinstall it.

Perhaps this is all the causes of the invisibility of a good printer.

After upgrading to Windows 10, many users faced the problems of their printers and the MFP, which the system does not see, does not recognize, or they do not print the way it was in previous version operating system. If you have a similar situation, we will look at several additional wayswhich can help correct the problem.

How to connect printer to laptop

Using the panel diagnostics utility windows management 10 You can try automatic solution Problems with the device.
To start you need to open the control panel, select "Diagnostics", click on "Troubleshooting", then in the "Equipment and Sound" section, click "Using the Printer" (another way: "Go to devices and printers" - clicking on the desired option - "Troubleshooting"). Also to start the troubleshooting tool, you can download the file with

The diagnostic utility will be launched, which automatic mode Check for all typical problemswhich may interfere with the right job, when discovering problems will correct them.
The program will be checked for new drivers, the performance of the necessary services, connection problems with the device, print queues.
This method is recommended to try primarily guarantees that it will give a positive result.

Add printer in windows 10

If automatic diagnostics did not help or the printing device is not at all displayed in the list, you can try to add it manually, for old models in Windows 10 there are additional features Detection.
In the first case, you will need to click on the notification icon, select "Parameters".

You can press the "Win + I" keys, then select "Devices"

"Printers and scanners."

Click the "Add Printer or Scanner" button and wait, possibly, Windows 10 will detect the device and drivers for it will be installed automatically, if there is an Internet connection, may not find.

In the second case, you will need to click on the item "The required printer is missing in the list", it will appear under the indicator of the search process. The ability to install on other parameters will appear: specify its address on the network, note that it is already old (in this case, its search for the system will be implemented with changed parameters), add a wireless printer.

How to install a printer driver on windows 10 manually

Go to the official website of the manufacturer of your device, there you need to find the "Support" / "Support" section, and there are available drivers and download them to your computer. Before you run the installation, it is recommended to go to the "Control Panel" - "Devices and Printers", if your printer is defined there, but it does not work, then you need to click on it right mouse button, click "Delete" and wait for all components to be removed from the system . After that, launch the installer.


How to delete printer driver

If the firewood installation did not help, you will need to delete the printer files, you need to perform the following steps. Through the start to find the "Printers and Faxes" command, select the Server Properties "File menu. In the "Drivers" tab, select the parameter to be deleted, click the Delete button.
Only a fully remote driver does not hurt and will not harm the installation of the new one.

Installing Drivers With Windows 8

If, after a thorough search, the driver was not found, one things it turns out, or the manufacturer has not released it, or its high-quality work on the new Windows 10 is not provided.
Then it remains only to try to find and install firewood for the previous version of the system. In Windows 10, there is backward compatibility with Win 8 and 7. Microsoft officially confirmed that if the drivers operate on the seventh and eighth windows, they will work with Win 10. Adding firewoods of previous OS can solve the problem.

You will have to go to the manufacturer's site again, by name the model, search for the driver for Windows 8, download and install it on Windows 10.

Information from Windows 10 Support Printer Manufacturers

HP (Hewlett-Packard) ensures that most devices will work. Those who worked in Windows 7 and 8.1 will not require updates. If you have problems, you can download the driver from the official site for Win 10. The HP website has an instruction to solve problems with the components of this manufacturer in the new OS.

Epson promises support for printers and MFPs in Windows. Required drivers for new system You can download from their official site.

The Canon manufacturer information reports that most printing devices will support the new operating system. Firewood can be downloaded from. Website by selecting the desired model.

Panasonic promises to release drivers for Windows 10 in the near future. XEROX writes about the absence of problems with the work of their printing devices in the new OS.

Installing a printer from disk with drivers

When connecting the printing device through USB cable Windows 10 automatically finds the driver almost always. But what to do, if you need to connect new printer to a PC without access to the Internet.

In this case, you can use the drive with the drivers that comes with the printer. For example, connect Printer Canon PIXMA G3400 to a computer via USB interface.

Need to install optical disk In a DVD drive and run it. The start window opens. In this window, click the "Printer Setup" button, then take the license agreement.

The next step is to allow the installation wizard all actions.

Select a printer connection via USB.
The installer will start the installation, upon completion in the system, a new installed canon pixma g3400 jack has appeared.