Menu
Is free
check in
the main  /  Problems / Why can't change permissions. Change the screen resolution in all versions of Windows

Why I can't change permissions. Change the screen resolution in all versions of Windows

Modern systemsStarting with Windows 7, you can choose an optimal value for the screen, so it should not be worried about it. It turns out that there are people, most likely beginners who ask a question, how to change screen resolution, And no matter what operating system is and what computer. The instruction will be individual for everyone and, I hope you will help you.

There are still a couple of moments that I am touched here. Suppose you have a monitor with a resolution of 1920 to 1080, or higher. It is known that for it to put the value of 800 × 600 will not work. Why? And because you will see the screen distortion, since the values \u200b\u200bdo not correspond to the physical values \u200b\u200bfor the screen.

Let's start from the depths, namely from the seven. Using this particular operating system, you can not worry that the value will be selected not exactly. Although sometimes the value is exhibited lower than necessary, therefore, knowledge come to the rescue that can be learned from this manual.

The article slipped the moments on the topic, and the article itself is quite useful. If I wonder if you can read.

For manual setting The screen resolution is needed on the desktop right-click on an empty place. A menu appears where you select the option. "Screen resolution".

One of the subsections of the control panel, called "Screen Settings" opens. Here we see three parameters:

  • Screen;
  • Resolution;
  • Orientation;

Naturally, we are worried about the second point. The first is responsible for choosing an additional monitor, and the last and so clear. Open the Options tab "Resolution" And select Maximum. In my case - 1366 at 768. Most likely the corresponding word will stand opposite the maximum permission - Recommended.


The note: It is worth paying attention to the time when you cannot change the screen value. The fact is that you must install the drivers for a graphics adapter. As a result, the screen value can be changed not only from the control panel, but also in the video card settings. Below I will explain how to use these settings. (Drivers are usually installed automatically).

How to change screen resolution in Windows 10

In the specified operating system there are the same parameters from the control panel, but it must also be found. We will not bother, and let's see how to do it from the parameters menu.

As in the first case, we press the right mouse button on the desktop and choose the option "Screen Settings".


The window opens with the subsection "System". There are many tabs, but we are interested in "screen." In the right side of the window, we see several parameters:

  • Night light mode - best suited for reading in the dark;
  • Scale and markup - what we need;
  • Several displays - we can connect additional monitors.

Find a parameter "Resolution" And change to the maximum value, it will not be marked "recommended".


In addition, you can specify the size of the text in the applications. It costs 100% standard, but the value can be changed by 125%.

Unfortunately, the specified method is the only top ten. In the control panel removed the "Screen" section and change need settings You can only via the "Parameters" menu. These are the tallest, these Microsoftovtsy.

Use the graphics adapter utility

Show on the example video card NVIDIAbecause I do not have AMD.

When we click on the desktop by the mouse, to call context menuWe can see the following items:

Both of these partitions have many settings, but only the first one includes the screen resolution parameters. Let's consider on example Intel HD. If you have this software, you launch it.

The HD graphics control panel opened. Go to section "Display".


In the main settings of this miracle, we see all the options that we need. Now you know how to change the screen resolution using HD graphics.

Well, that's all, now you know everything. In the game this procedure is done in the settings. And I will not talk about Windows 8, since there are the same parameters, why talk about the same thing a hundred times. I hope this small leadership will help you.

Often players need to be changed permission in the game without going into the game. How to make a question difficult, but there are several answers. Decisions are relevant for players who cannot start their game at all or it is partially loaded without displaying the picture (stalker, frostpank). For stima there will be separate options, so Favorite Dota 2 and CS: Go and Pubg will be able to configure without any problems.

We tried to collect all the general options that will be practically applicable to all modern games. So, how can I change the permission, not launching the game - general solutions.

If in your case, when trying to start the game, you get notifications "INPUT NOT Supported", "Non-optimal mode" or "Out of range". If that is why you want to change the game resolution without login, then try to start the tips specified in our where you need to work with the PNP-plugin video driver. Also try to first open the window mode to Alt + Enter for the game client (with a running game).

For owners NVIDIA

Video cards always possess their software settings. NVIDIA client allows you to change the permissions of any software installed on the PC. This will require the NVIDIA GeForce Experience application. There are all the tools for adjusting the video card. One point becomes permission. Download the program is necessary from the official source of NVIDIA - their site.

Despite the large functionality of the NVIDIA GeForce Experience, some games block her work. You can especially encounter this recent versions. Do not be surprised if you can change the settings it will be impossible.

"Properties" will restore the work of graphics

Often players catch the bug: the game is loaded partially or only one black square. It is impossible to get into the menu, so we eliminate incorrect loading through the label properties.

  • You need a mouse and game label. On it click PKM. I choose the first item below "Properties".
  • By default, you will throw out on "Label". Mix B. right side to "Compatibility". In the second window, it will be said about the use of the screen resolution of 640x480. I exhibit the mark next and agree to make changes (OK).
Change the game permission through the label properties

Similar parameters do not arrange gamers. Change from 640x480 to something else will work out of the game that will boot - this universal way Bypass any graphic problems. Visit the parameters, set the resolution of your screen. Although some games where graphics are not important will look quite decent. Lovers of smartphones are just suitable.

Correct game files

Any game in their directories contains such files: .ini i.cfg. Only endings are indicated, and not the name is completely. The player needs to scroll through all the folders to find the desired formats: one place is not available. To change the resolution already found.ini / .cfg we translate them into notepad - open with a text format.

  • Rent text again until the current resolution flashes: 1920, 1080, etc. Sometimes they are marked with ISIZE W or H symbols. Calculate the necessary data, change them according to new requirements. Writing parameters, save the resulting text.

Duplication of the file will help secure yourself from the error. Before making changes, save it. If you make an error, new document Remove, replacing the old one.


Change permission without entering the game through Steam

Problems with Dota 2 and CS: I decide through Steam. Visit to the beginning of the library with the defined content. With the help of PCM, we visit the category properties (properties), the game that the game that was gathered is to correct.

  • Now it is important to correctly enter the proposed combination in Set Launch Options. (Set start parameters). The slightest error will completely deprive you correct permission.
  • We prescribe the following -W XXXX -H XXXX (Leave Defisites). Instead of x - our parameters: 1920 and the like. W - horizontal, and h - vertical. Below is a visual screenshot
  • Reboot Steam No need. Nothing in the parameters of the game is not exhibiting. Just enjoy good resolution.

Setting the start parameters for DOTA2

All these tips should help with changing the permission of the game, without entering it. I repeat once again - first read our past material (from the first item) and update the video driver. When changing through the config file, be careful and all duplicate, in order to avoid problems.

To make the computer screen settings as comfortable for the eyes, you need to know how to change the screen resolution of the monitor personal computer or laptop.

Screen resolution is an indicator that determines the clarity of displaying all icons, pictures, that is, graphics as a whole. It is important to determine what will be better for the monitor.

Changing the extension using the built-in OS functions

The greater the resolution, the better clarity of the display. For example, the display is 22 inches, will have a standard, which is equal to 1680 * 1050, it is optimal and maximum for this screen.

All available dimensions are available in the settings, it is desirable to choose the largest of the proposed.

Follow the instructions to change the image resolution of your display:

  • Follow the desktop operating system. Press it on the right mouse button and select the screen parameters, as shown in the figure below;
  • In the window that opens, you can configure the size of the text, icons and other system elements in real time. You can also configure the orientation of the screen. To go to the selection tab, at the top in the search bar, enter the word "resolution";
  • Select Screen Resolution item;
  • Click on the drop-down list, as shown in the figure, and take the standard recommended. Save new settings.

Important! It happens that the recommended resolution is more than the display. That is, the final image size does not correspond to the size of the screen, so some elements of the desktop may abide from the field of view of the user. Monitor configuration will eliminate this problem. In the selection options, choose not recommended, and the one that fully displays all the elements of the desktop. At the same time, all graphics should be a clear.

Several common types of expansion and their corresponding displays:

  • 1024 * 768 - perfectly suitable for screens, the size of which is 15 or 17 inches. In the display resolution of 1024 * 768 points, the depth of color is 16 bits;
  • 1280 * 1024 - Designed for displays, the size of which is 19 inches;
  • Types of monitors, 24 inches size most accurately transmit the image at a resolution in 1920 * 1080. All displays with such parameters refer to FullHD.

Screen update frequency control

The higher the display frequency of the display, respectively better quality Images. That is why, in addition to the size, you need to pay attention to this parameter. To change the update frequency Follow the instructions:

  • Go to the control panel. IN local line Enter the "screen" (without quotes);
  • In the proposed search result, select the item that is responsible for the screen update frequency, as shown in the figure;
  • Set the highest update frequency. This will eliminate the possible periodic flickering of the monitor.

NVIDIA software

How to find out suitable permission For your display? This can be done on the official website of the manufacturer or in the instructions that are attached to the device.

On the boxes of monitors and laptops from Samsung, there is information on how to set the right permission and what to do if the real does not correspond to the declared one.

Via special Programwhich is pre-installed on all computers equipped with the NVIDIA video card, you can also adjust the user monitor resolution. Follow the instructions.

It is no secret that for different monitors optimal is the different size of the screen resolution, which indicates the number of points on the display. The greater this value, the more high-quality image. But, unfortunately, not all monitors are capable of correctly maintaining high resolution. In addition, some users deliberately lower it to get a great computer performance in return to the beautiful graphics. Also change this parameter is required to perform a number of specific tasks. Let's figure it out how to set up different ways Permission to Windows 7.

All available methods for changing this screen parameter on Windows 7 can be divided into three groups:

  • Application of third-party software;
  • Using video card;
  • Apply the built-in operating system tools.

At the same time, even when using methods with embedded OS tools, various options can be applied. Let's talk about each of them in more detail.

Method 1: SCREEN RESOLUTION Manager

First of all, consider the use of third-party programs to solve the task in this article by the example. screen applications Resolution Manager.

  1. After downloaded installation file. Screen Resolution Manager, the program should be installed. To do this, launch the installer. A welcome window will open. Press in it "Next".

  2. Next, the license agreement is launched. Here it is necessary to accept it by setting the switch to the position "I Accept the Agreement". Then press "Next".

  3. Next, the window opens, where the location of the executable file of the installed program is specified. If there are no special reasons, you do not need this directory, so just press "Next".

  4. In the next window, you can change the name of the program icons in the menu "Start". But, again, without much reasons, it makes no sense. Press "Next".

  5. After that, the window opens, where the data you entered are generalized. If you want to change something, then click "Back" And produce editors. If everything is completely satisfied with you, then you can start the procedure for installing the program, for which it is enough to click "Install".

  6. The procedure for installing Screen is resolverava.

  7. After completing the specified process, the window opens, which reports that the installation is successfully completed. You just press the button "FINISH".

  8. As you can see, this program does not provide the ability to automatically start after installation. Therefore, you have to run it manually. The label will not be on the desktop, and therefore follow the following recommendations. Click on the button "Start" and choose "All programs".

  9. In the list of programs, look for a folder "SCREEN RESOLUTION MANAGER". Come in it. Next click by name CONFIGURE SCREEN RESOLUTION MANAGER.

  10. The next window is started, in which you need to either go to the logging code by clicking on "Unlock"or take advantage of free version for seven days by clicking "Try".

  11. A program window opens where the direct screen resolution settings are made. For our purpose you will need a block "SCREEN SETTINGS". Install a tick near the item "APPLY SELECT SCREEN RESOLUTION WHEN I LOG ON". Make sure to in the field "Screen" was the name of exactly involved in this moment On your computer video card. If it is not, then select from the list need option. If your video card is not displayed in the list, click on the button "Identify" To carry out the identification procedure. Next, dragging the slider "Resolution" Left or Right, select the screen resolution that you think. If desired, in the field "Frequency" You can also change the screen update frequency. In order to apply the settings, click Ok.

  12. Then make a reboot of the computer. If you are using trial version Programs, then after rebooting, the starting window of the Screen Resolution Manager opens again. Click on the button "Try" And the screen will be the previously chosen permission.

  13. Now, if you want to change the resolution next time using Screen Resolution Manager, it will be possible to make it much easier. The program is prescribed to autorun and constantly works in the tray. To make adjustments, it is enough to go to the tray and right-click ( PKM.) By its icon in the form of a monitor. The list of monitor resolution options. If it does not have the desired option, then Mouse over to the item "More ...". An additional list will open. Click on the desired item. Screen parameters will immediately change, and this time do not even have to restart the computer.

The main shortcomings this method It is the fact that a free use of the SCREEN Resolution Manager program is limited to just a week. In addition, this application is not Russified.

Method 2: PowerStrip

Another third-party program with which you can solve the task is PowerStrip. It is much more powerful than the previous one and specializes, mainly on the acceleration of the video card and the change in its parameters, but also makes it possible to solve the task and delivered in this article.

  1. Installation Power Strip has a number of features, so it makes sense to stop on it in detail. After you downloaded and launched the installation file, the license agreement is immediately opened. In order to accept it, install a tick opposite item "I AGREE WITH THE ABOVE TERMS AND CONDITIONS". Then click "Next".

  2. After that, the list of supported by the program of operating systems and video cards. It is recommended to view in advance whether the name of your OS and the video card in the list is in order not to install the utility. Immediately need to say that PowerStrip supports both 32-bit and 64-bit version of Windows 7. So the owner of this OS can only check the availability of a video card in the list. If you detected the required parameters, then press "Next".

  3. The next window opens in which the program installation directory is specified. Default is a folder "PowerStrip" In the general catalog of programs on the disk C.. It is not recommended to change this parameter if there are no special reasons. Press "Start" To start the installation procedure.

  4. Installation procedure is performed. After that, a window opens in which you ask whether you want to add to the system to better work windows registry Some additional records. In order to do this, press "Yes".

  5. Then the window opens in which you can adjust the display of the utility icons in the menu "Start" and on "Desktop". This can be done by installing or removing checkboxes opposite items "CREATE A POWERSTRIP PROGRAM GROUP IN THE START MENU" For menu "Start" (Inclusive by default) and PLACE A Shortcut to PowerStrip on the Desktop » for "Desktop" (Disabled by default). After specifying these settings, press Ok.

  6. After that, to complete the installation of the program, it will be prompted to restart the computer. Preserve all open but not saved documents and close working programs. Then, to activate the restart procedure, press "Yes" In the dialog box.

  7. After rebooting the PC utility will be installed. She is spelled out in autorun in system RegistrySo when loading the system, it will automatically start working in the background. For our purposes, click on its icon in the tray PKM.. In the list that opens, Mouse over the list "Display profiles". IN additional list Click by "Tune…".

  8. The window is started "Display profiles". We will be interested in the settings block "Resolution". By dragging the slider in this block to the left or right, set the desired value. In this case, the value in pixels will be displayed below. In the same way by moving the slider in the block "Regeneration frequency" You can change the screen update frequency. On the right of the slider displays the corresponding value in Hertz. After all settings are made, press "Apply" and Ok.

  9. After that, the display parameters will be changed to the specified.

Method 3: Using a video card

We study the screen parameter can also be changed using software The video card manufacturer, which is installed with it and serves to control it. In the overwhelming majority of cases of this type of program are installed on a computer along with video card drivers. Let's see how to change the screen settings in Windows 7 using the NVIDIA video card control.


IN "NVIDIA control panels" There is so interesting functionwhich allows you to set permission, even if it is not supported in standard settings monitor.

Attention! By producing follow-up actions, you need to understand that you perform the procedure at your own risk. Even the options are possible when the actions below can harm the monitor.

  1. In our case, the maximum monitor resolution is 1600 × 900. Standard methods Most values \u200b\u200bwill not work. We will try using "NVIDIA control panels" Set the figure of 1920 × 1080. To go to change the parameters, click on the button "Setup ...".

  2. The window opens where a whole range is presented. additional parametersthat we did not observe in the main window. Their quantity can be increased by setting a tick, which is removed by default, opposite item "Show 8-bit and 16-bit permission". In order to add selected combinations to the main window, it is enough to put the ticks opposite them and click Ok.

    After the values \u200b\u200bare displayed in the main window, it is necessary to produce the same procedure for their application, which has already been conversation above.

    But, as it is easy to notice, in this additional window, the parameters of fairly low quality are installed. They are not displayed in the main window simply because rarely used. Developers just want to not clog the main window "NVIDIA control panels" Rarely applicable low quality parameters. We also have a reverse task - create permission is higher than in standard settings. For this press "Create a custom permit ...".

  3. The creation window opens custom settings. Here you need to act very carefully, as it was mentioned above, the wrong actions in this section may entail the deposits for the monitor and for the system. Go to the settings block "Display Mode (as reported Windows)". In the fields of this block displays current permission Screen vertically and horizontal in pixels, as well as the update rate in Hertz. Drive into these fields the values \u200b\u200byou need. In our case, since the parameter is 1920 × 1080, in the field "Pixels horizontally" Enter the value "1920"and in the field "Vertical strings" — "1080". Now click "Test".

  4. In the event that the specified values \u200b\u200bdo not exceed the technical capabilities of the monitor, the dialog box will appear in which the test passed successfully. In order to save the parameters, it is necessary to press in this window until the timer is completed. "Yes".

  5. Returns the parameter changes window. Listed in the group "Custom" The parameter created by us is displayed. In order for it to be able to use, check the box in front of it and click Ok.

  6. Automatically go back to the main window "NVIDIA control panels". As you can see, the created parameter is also displayed in the group "Custom". In order to use it, make a value selection, and then press "Apply".

  7. Then the dialog box appears in which you must confirm the change in the configuration before the timer expires by pressing the button "Yes".

All of the above applicable for computers and laptops with a discrete adapter from NVIDIA. Similar manipulations can be performed and holders aMD video cardsUsing one of the "native" programs for this - (for modern graphic maps) or (for older models).

Method 4: Using Built-in System Tools

But you can also solve the task, using only the built-in system tools. Moreover, most users of their functional are enough.

  1. Click "Start". Next choose "Control Panel".

  2. Then press "Registration and personalization".

  3. In a new window in the block "Screen" Select a parameter "Setting screen resolution".

    There is another option to get into the window you need. To do this, click PKM. by "Desktop". In the list, select "Screen resolution".

  4. When using any of the described algorithms, a standard tool for changing the screen parameter we studied is opened. In field "Resolution" The current value is indicated. In order to change it, click on this field.

  5. The list of options with the slider opens. To increase the quality of the displayed material, pull the slider up, to reduce - down. At the same time, the value of the position of the slider in pixels will be displayed in the field. After the slider is installed opposite the desired value, click on it.

  6. The selected value will be displayed in the field. In order to apply it, click "Apply" and Ok.

  7. The screen will go out for a moment. After that, the selected parameters will be applied. In the appeared window you need to click on the button "Save Changes" Prior to the termination of the timer, otherwise the screen settings roll back to the same values.

Change the screen resolution can be as applied third-party programs or software, going along with the video card, and using the built-in instrumental operating system. At the same time, in most cases of the capabilities that the OS provides is enough to meet the queries of most users. Contact a third-party or video card settings makes sense only when you need to set permission that does not fit into the standard range, or apply the parameters that are not in the basic settings.

Users at various forums complain that they cannot change the screen resolution in Windows 10. These are reported that the screen resolution drop-down window does not displays all available permissions or displays only the current screen resolution. If you also can't change the screen resolution in Windows 10, try the following steps. I recommend reloading the computer once before fixing.

Most often you cannot change the screen resolution without installing the correct graphic Driver Display.

Method 1. Press the button combination Win + X. and select in the menu " Device Manager"Next deploy Count" Video adapters"And you will see if the video driver is installed or not. If the display driver is not installed, you will see the record" Basic video adapter Microsoft."Instead of recording a video card, then click on it with the right mouse button and click Update. If you cannot update, then go to the video card manufacturer website and download from the official site.


Method 2.. Sometimes a restart of the graphics driver can eliminate the problem. Click simultaneously combine buttons Windows + Ctrl + Shift. + B.. Your computer will publish sound signal Once and your screen can flicker. Check if you can change the screen resolution in parameters.