Format hard disk. HDD formatting programs

Sometimes there are situations when you need to clean hDD, that is, format it. C, D, E or any other. But in most cases on logical disk With Windows installed. She will not clear just like that. The remaining complete cleaning is simply.

There are three types of formatting:

• We do not have any relationship to low-level. After all, it is produced at the plant for the manufacture of configuration using special equipment. IN service center, not to mention home conditions, it will not work.
• The second formatting method involves dividing the logical carrier into several smaller sizes. That is, instead of one we get two or more disks. Conduct such manipulation only when installing the OS.
• Third view is high-level formatting. It is divided into two subspecies. In the case of rapid formatting, the files remain in their places, only the file table is updated, and the OS sees the disc empty. It is very convenient when we do not want to fully lose the data or formatting by mistake. With full formatting, all information is erased without a return, in addition, the system checks the device for good condition. If troubleshooting is detected, the data record will not be made.

There are four ways to implement high-level formatting: cleaning the partition windows tools, through command lineWhen installing the operating system, using the system utility.

When formatting OS tools, no extraneous scripts and programs are required. I will go to "My Computer", clasper on the desired disk With the right mouse button and select the "Formatting" item. IN open window With formatting parameters, select the cluster size or file System. But in practice only the Tom label is installed. If you take a tick in the "Fast" field, cleaning will take much longer. After clicking "Start". On the this stage A warning to delete all data will appear, so you need to click "Cancel" if you have not made a copy. If information is saved - clay "OK". At the end of formatting, a message will be released where we click "OK". You can close the window with the parameters - the disk is cleaned.

Another formatting option is performed using the command line. Open "Start" - "Run". Alternatively, we click the combination of "Win" + "R". In a new window, we enter "CMD" and clay "OK". The command line will start, in which you prescribe "Format F", where F is the name of the disc. After the OS, you will require confirmation of the action: y - yes, n - no. Please note that it will not pop up a warning to delete data. In addition, the default formatting will be performed, namely, complete. To spend fast, enter "Format F: / Q". At the end, it will be possible to set the volume label. Just clay "ENTER".

If you want to format the disk, making Windows installation, you will need a flash drive or installation disk. We start loading the OS from the physical media, carry out similar actions as if windows installation. When it is possible to select the installation partition, click "Customize Disk". Options will open: "Delete Tom", "Create Tom". You will also see the link "Format Tom". Click "format", choose which section to clean, including one can designate the one where the OS was placed. In this case, fast formatting will be performed. If you do not need to install Windows, you should close the window so that the process is interrupted.

WINDOWS OS Windows 7 can use the mounted system utility. It is enough to go along the path "Start" - "Control Panel", then "System and Security", then "Administration". After press "Creating and formatting sections hard disk" In this menu it is convenient to view which discs and their breakdown are connected to your PC. In it by clicking right key to the desired section and select "Formatting".

Thus, from this article you learned how the hard disk formatting process in Windows is being passed. There is nothing complicated in this, as you can see, fasten your knowledge of the thematic video.

Due to certain reasons, PC users sometimes need to format the hard disk. Options, how to do this, there is a mass. By itself, this process is complete cleaning "hard" from the information that is on it. Most often used when changing the operating system. Before you need all the necessary information to save on any other carrier. For example, on a disk, flash drive or an external drive.

Through the command line

The easiest way to format a hard disk is caused by a console. The command line starts like this:

• click "Start";
• from the list "All Programs", select "Standard";
• in the opened podcast, choose the "Command Line".

But further it is necessary to register what the disk will be erased entirely. Let it be "C". You must enter into the "Format C:" console. Before forming a hard disk, the system will warn you that all the data will be broken, and asked to confirm the decision. You can call the command prompt, even if the computer is damaged by viruses. Just during system boot, you need to press F8 and select Run in safe mode With the support of the console. Depending on how much the information is loaded, the formatting takes from 10 minutes to an hour. At this time you just need to wait, without pressing anything. Or do your affairs.

Through "My Computer"

The most accessible way for all users a way to fully format the hard disk is to select the disk itself from all available in the folder. You need to go to "My Computer" on Windows XP or "Computer" on other versions. Among all the disks that are, choosing the one that will be washed. Right click Mouse Call the context menu. Select item: "Format disk". Carefully read the question from the system. It is worth noting that before forming a hard disk, you need to go in the administrator mode. Otherwise, the option may be unavailable (on some versions of operating systems). The operation takes a long time if the disk is fully filled with information. It is noteworthy that in this way any hard can be removed, regardless of whether there is an operating system there or not. That is, you need to be extremely attentive when using PC, especially if children have access to it.

How to format a hard disk?

Speaking about such a procedure, like removing and cleaning all files on the device, you can not say about the method with special optical disks. Specifically, where there is already a new operating system. Here everything is easier simple: in the drive you need to insert a disk and wait until it is spinning. Next you just need to follow the steps. One of them will be how to format a hard disk. If the hard is virtually divided into several parts, then the system will propose to delete both or only one. The one where the OS is worth (by default it is a C drive). That is, the information on other disks will remain untouched. ATTENTION If viruses and malicious programs started in the system, it is necessary to delete both so as not to give dissemination viruses in the computer. In the event that knowledge is not enough to spend all the steps correctly, refer to the specialists who quickly and without prejudice to your PC format.

Hello everyone friends. In this article, I want to tell you how to format the USB flash drive different waysSo that you can choose the most optimal for yourself. The flash drive is currently the most common and convenient carrier, the most different information. But after a certain period of time, it is necessary to carry out the formatting procedure, for a number of a variety of reasons:

- Quickly delete all files on the media

- cleaning flash drive from viruses

- appearance errors when writing or reading

- slow media work

- the need to create a boot flash drive

Also, formatting will be useful if you, for example, want to copy a file with a size of more than 4 GB to the USB flash drive, then formatting from FAT32 format to NTFS format.

As you can see, options for carrying out this operation can be mass, let's consider the difference from fast and complete formatting (hereinafter referred to as this will be discussed).

With quick formatting, only the file posting table is cleared, if desired, the deleted data can be restored. With full formatting, all data is destroyed fully (overwriting with zeros), and, as a rule, this process takes longer than with rapid formatting.

Everything, with the theory, we finished, let's start practicing, and I will tell you how to format the USB flash drive.

Formatting flash drive built-in tools

Through the command line

Using the HP USB Disk Storage Format Tool program

Tip! Before formatting, be sure to copy the files important for you to your hard disk or other removable media.

How to format the USB flash drive - 3 ways

1) Using the built-in Windows

Insert your removable media into your computer and open the My Computer window, you can also click the key combination:

In the window that appears, right-click on the icon of your media and select Format.

In a new window, set the required parameters:

Capacity - service information about the size of the carrier is displayed here, it does not change.

File system - You can select the type of file system from the drop-down list (NTFS, FAT32, EXFAT). I advise you to choose type - NTFS.

Cluster size - leave unchanged.

Restore default parameters - This button returns settings to the standard, we do not touch it.

Tom label - here you can specify any name that will be displayed when the flash drive is connected to the computer.

We put a tick opposite item quick cleaning if you need to urgently clean the media memory. If the flash drive works slowly and constantly slows down, or it is infected with viruses, then this tick is removed.

Click the start button and in the next window confirm your actions by pressing the OK button.

Through a short period of time, an inscription will appear, on the end of formatting.

2) Formatting a flash drive using the command line

Click the key combination:

or the Start button - execute, and enter the command - CMD to call the command line.

In the window that appears, you need to enter the following command:

format H: / FS: NTFS / Q / V: My_Fleshka

format H: - This is a command that runs the formatting of the removable media indicated by the specified letter. To find out which letter is used by your flash drive, open my computer.

/ FS: NTFS - This command sets the type of file system to be used after formatting a flash drive. This example is NTFS.

/ Q - this part of the team denotes quick formatting for complete removal Data, not use it.

/ V: My_fleshka - Tom label, or the name that will be assigned to your carrier.

and press ENTER.

The following message will appear:

where also press ENTER.

All, the formatting process is running, expect some time before this message appears.

3) How to format a USB flash drive using the HP USB Disk Storage Format Tool program

The program, carry out its unzipping and run the EXE file (it does not require installation) from the admin names (click the right mouse button on the file and select the start on behalf of the administrator).

You will appear in front of you in which you want to select the file system when formatting, as well as specify the name of the flash drive. Select the formatting method - fast (put a tick) or Full cleaning (do not put a tick), and press the start button.

A warning window will appear, which we click the button, and the formatting process with specified settings begins.

Depending on the selected formatting method, a window with a formatting result appears after a certain period of time, in which you want to click OK.

Now you know how to quickly format the USB flash drive and deprive yourself of problems associated with removable media.

And I have everything, so far!

Command Line - Powerful Management Tool operating system Windows. With its help, you can make almost everything that is usually done with graphic interface. In this material we will tell about how to format the hard disk or flash drive using the command line.

Step number 1. Run a command line.

If you want or via the command line, then first you need to run this command line. At the same time, otherwise you will not be able to use the formatting command.

You can run the command prompt with administrator rights in several ways. The easiest option is to use the search in the Start menu. To do this, open the "Start" menu, enter the "CMD" command search, then right-click on the command line and select the option "Start from the administrator name".

If you use the operating room windows system 8 or Windows 10, you may not even use the search. Just click the Windows + X key combination and in the Open "Command Line (Administrator)" item appeared.

After that, a warning from monitoring accounts will appear. In order to continue clicking on the "Yes" button.

As a result, you must open a command line with administrator rights. For administrator rights, the Administrator will specify the inscription in the command line header.

Step number 2. execution of the team on formatting hard disk or flash drives.

After the command line with the administrator rights is running, you can proceed to formatting. For formatting through the command line, the "Format" command is used. In order to obtain all the information about this command, enter "Format /?".

In order to format a hard disk or flash drive, along with the Command "Format" you need to use the correct parameters. At a minimum you must specify the drive letter you want to format. For example, here "Format D:". In this case, standard parameters will be used for formatting.

Please note that before formatting a hard disk or flash drive you will be asked to enter the volume label (disk name). You need to enter the current Tom Tag, and not the one you want to get after formatting. You will also need to confirm the formatting of entering the letter Y (from English YES).

The new Tom label can be set after the formatting is completed. If you do not need a new mark, you can simply press ENTER and the system will use for of this disk Standard Tom Tag.

By adding other parameters to the "Format D:" command, you can more finely control formatting. For example, adding "/ FS: FAT32" you can format the disk into the FAT32 file system. And the "/ Q" parameter allows you to quickly format a hard disk or flash drive. As mentioned above, to obtain information about all possible parameters of the "Format" command, you need to execute "Format /?".