Menu
Is free
registration
home  /  Problems/ Rssi range optimal for tp link repeater. How to Connect and Set Up a WiFi Repeater - Router Signal Repeater, WiFi Booster

Rssi range is optimal for tp link repeater. How to Connect and Set Up a WiFi Repeater - Router Signal Repeater, WiFi Booster

For example, a router is installed in a house or apartment, but in the back room a laptop, phone or tablet has a weak signal level. At the same time, it is so weak that connection is sometimes impossible.

You can of course connect to a laptop more powerful wifi adapter, but what to do with the phone and tablet? In this case, we will be helped by an access point that supports the operating mode - repeater or repeater. Access point TL-WR740N will connect via Wi-Fi to your router and transmit wireless signal further than a phone, tablet, or other client device can. With the help of a TP-Link repeater, you can boost wifi signal for your devices.

Setting up an access point in Wi-Fi repeater mode

TP Link Router connects to a computer or laptop using a twisted pair cable. Power is connected to the access point using the power supply. Settings network card should be set by default.

After setting up the access point, the cable from the computer to the access point can be disconnected.

We open Internet browser Explorer, Mozilla, Opera, Chrome or any other, and enter the address 192.168.0.1 . This is by default, it can also be viewed on the bottom of the router.

Enter your username in the next window. admin, password admin.

Open the menu: Wireless mode - Settings wireless mode — .

After – a group of text boxes will appear below. Press the "Search" button

In the window that appears, click "Connection" opposite the Wifi network to which we will connect.

Select the type of encryption: open, or . In the last column, enter password from wifi networks to which we want to connect. We also install channel number, the same as the Wi-Fi network with which we want to create a WDS connection.

After that, save the settings by clicking the Save button. If the wifi channel of the network is different from the required one, then you will receive the following notice:

The channel of your access point does not match the channel of the bridged access point, do you want to change your channel to the channel of the bridged access point?

We confirm, and the channel should automatically change to the correct one.

Now it remains only to configure wifi network security settings. Go to the menu: Wireless mode - Wireless protection. We select the type of encryption and the password that is used on the router to which our TP-Link repeater is connected. In our case, encryption was used.

Please note that if you use on your router, then in the fields Type, WEP Key Format, WEP Key, Key Type settings similar to the router to which the access point will connect should be specified. Otherwise, the TP-Link repeater will not connect to the router. Don't forget to indicate correct region where your router is located. If the source router has a different number in the channel column, then the repeater cannot connect to the router due to incorrectly specified security parameters.

After setting the security settings, save the settings with the Save button and reboot.

Checking WDS Mode Activation

You can find out that the TP-Link repeater was able to connect to the router in the menu State.

Open the menu and look at the connection settings. In field Name ()- should appear wifi name networks, in the field - the poppy of the router distributing the network, as well as channel number and other options.

Connecting equipment to a Wi-Fi network with WDS

You can connect to WDS WiFi network smartphone with Wi-Fi, tablet or laptop. To connect a laptop to a Wi-Fi network, in the lower right corner of the screen we find the icon WiFi control connections. In the list, select our Wi-Fi network and click the "Connect" button.

Enter the password to connect to the Wi-Fi network, which was set in the router settings. After that, the laptop will connect to the Wi-Fi network.

Checking the connection of devices to the Wi-Fi repeater

After connecting any wireless device(laptop, phone, tablet) to a Wi-Fi network, check that the device has connected to the repeater, and not to the router. To do this, on the access point, open the menu Wireless mode - Wireless statistics and see the devices connected to the TP-Link repeater.

If the MAC address of your device is not in the list, and the Internet is working on it, then the device has connected to the router, because at this point the signal of the router is better than the signal of the repeater. Set the access point away from the router and connect next to it. If the device is still unable to connect to the access point, check that the access point is connected to the router and that it has the correct encryption type and password in the security settings.

Setting up the coverage booster wireless network TP Link tl wa850re can be carried out both using WPS technology by pressing a couple of appropriate buttons, and using the web interface of the repeater for more detailed settings. Apart from detailed description these methods, the article describes the main problems that arise during configuration, and how to solve them.

Wireless connection

There are several ways to set up the TL WA850re as a repeater. The first option is to use WPS technology, thanks to which the user does not have to make any settings on his own. Your tp link modem must support the WPS protocol. To activate the repeater, follow the instructions below:

The RE indicator stands for Range Extender. It has the following modes:

  • constantly lit (the repeater is successfully connected and duplicates the signal);
  • flashes (connection to the modem is in progress).
  • off (the repeater is not connected to the router).

The Wireless LED should be on. This indicates that the wireless mode is enabled. The tp link wa850re repeater completely repeats the parameters of your local network: name, password and channel used. If you need to spend more fine tuning or your router does not support WPS technology, then manipulations should be carried out using the web interface.

Ethernet connection

The web interface allows you to full customization tp link wa850re. At the time of the first launch, the repeater does not yet know the name of your network, so you will not be able to configure the repeater's repeater in wireless mode. To do this, you will need an Ethernet cable, which is already included in the package. Install and configure tp link wa850re according to the following instructions:


If your network is not in the list, click Refresh several times or move the tp link wa850re closer to the router.


Now tp link wa850re is ready to go. It expands your network coverage area. Disconnect your laptop from the extender and try connecting via Wi-Fi.

Device operating modes

TP "Link wa850re" can work as an adapter and repeater. The tp link tl wa850re management process does not involve any user action. The device can operate simultaneously in two modes. The repeater mode is activated immediately after switching on and quick setup through the control panel. This is the main function of the repeater.

If you need a repeater as an adapter, you just need to connect the necessary device (Blu-ray player, media set-top box or laptop) via the RJ-45 interface. Repeater TP Link will automatically provide the device with Internet access. It will also be presented with its own IP address due to the operation of the DHCP server. It is active by default, but if you wish, in the LAN section, you can turn it off or set a static IP address.

Setting up an access point

After successfully connecting the repeater, you can configure some modem parameters via the web interface. We recommend that you look into the "Wireless Network" section. This is where the network name and password are set. In the "Wireless Settings" subsection, the user will be able to change:

  • tp link wa850re operation mode (universal or WDS);
  • region;
  • network name of the main modem;
  • MAC address;
  • amplifier network name;
  • channel width.

  • security level (none or WPA2-PSK or WEP);
  • protection version and encryption type;
  • amplifier network password.

If necessary, you can also set MAC address filtering, but the average user does not need all other settings.

What do the numbers 300 Mbps, 900 Mbps and 1900 Mbps mean?

These numbers represent the data transfer and receive rates between the router/repeater and the device connected to it. The standard is 300 Mbps (megabits per second). Under ideal conditions without interference and interference, the transmission rate will be the declared number. In reality, the speed is significantly lower due to obstacles, channel overlap and various interference.

The higher the transfer rate, the more expensive the device costs. It should be understood that if your provider provides a connection speed of 100 Mbps, then you will not be able to get a higher data transfer rate using a modem or repeater, even if it has 300 megabits or more in the specification.

tp link tl wa850re wifi signal booster

The extender supports EEE 802.11n standards and also performs 64/128/152-bit WEP, WPA2-PSK and WPA-PSK encryption. The device has compact dimensions, so you can easily connect a Wi-Fi amplifier even in hard-to-reach places. To determine the signal level, there are light indicators on the right semicircle.

The modem's operating range is 2.4 GHz. The tp link wa850re uses the Qualcomm Atheros AR9341 chipset.

Checking Connected Devices

Through the repeater settings, the user can view the list of active devices. To do this, do the following:

The window will show all the devices that are connected to the amplifier.

A repeater (in other words, it is called a repeater, repeater, amplifier, range extender) is a very convenient device that allows you to quickly and easily expand the zone of your WiFi network.

We will consider the setup using the TL-WA850RE repeater from TP-LINK as an example. Model TL-WA850RE is declared as a device supporting speeds up to 300 Mbps (that is, up to 80-100 Mbps in real conditions, which is quite enough).

The repeater can operate in two modes: "Universal" and "WDS Mode". The differences between them are in the requirement for the head unit.

In the first case, the router to which the repeater is connected may not support WDS mode. In the second case, the router must support WDS mode, therefore, a specific channel must be assigned to the wireless network (i.e., the channel selection must not be set to "auto").

It is important not to confuse a repeater with an access point. The WA850RE cannot function as an access point, i.e. it cannot "distribute wifi" when connected to the head unit by wire. He, on the contrary, "receives the Internet" via wifi and can transmit it further along the wire.

Repeater setup

Plug in your device and connect to it using a wired or wireless network. In the case of a wireless network, you will need to find the unsecured network that the repeater creates. It will have a name (SSID) - "TP-LINK_Extender_" and 6 digits identifying the device. When connected by wire, no additional settings production is not required.

Then in address bar in your browser, enter "tplinkextender.net" - this is the web interface address of the extender. For access, use the standard login and password: admin/admin.

To configure the repeater, most often, it is enough to use the "Quick Setup" script

Quick Setup Mode Start Page



Now from the list available networks you need to choose your own (the one that is created by your router)


Check the box next to your network and click "Next"

Let's move on to setting up your network security


In the "PSK password of your main router/access point" field, enter the password for your wireless network. Click "Next" and then "Finish".

Setup completed.

After rebooting, the extender will start relaying your wireless network signal. It is advisable to place the device at such a distance from the router that the indication of the strength of the received wifi signal (on the body of the repeater - blue) is at least 3 bars, which corresponds to a good signal.

The article will discuss one interesting device - TP-Link TL WA850RE. Reviews about this device allow you to find out how well it works, what is its performance. What is this technique? We are talking about a repeater, which is also known as a repeater and repeater. It is necessary in order to increase the range of the existing wireless network. Further - in detail about the device.

Equipment

The device is sold in a white-green box. It shows the repeater itself, its characteristics and connection methods.

In the envelope that comes with the kit, there is a disk with all the descriptions and a special software, there is also an instruction for TP-Link TL WA850RE and documentation for the device. In general, such a set is unnecessary, since the process of setting up a repeater does not even take a minute. Also included in it network cable gray color.

Reasons for use

The repeater is used quite often. A popular reason for buying a repeater is a low-quality router whose signal is not enough for distant rooms or other floors. The TP-Link TL WA850RE repeater, reviews of which are given later in the article, will solve this situation with ease and without any problems. Of course, you can change the settings of the router, try to use a more powerful device, but nothing will give such a result as installing a repeater. The cost of the device is small, but the benefits of it are huge.

The essence of the work

How exactly does a repeater work? With a router installed that sends a signal to short distance, a repeater is used. It is necessary to activate the device in a place where the network is still stable. The last one should be configured. A second access point will be created, which is a copy of the first one. When moving to a place where the signal is weak, the networks will be automatically reconnected. If desired, you can create a point with a different name and password, which the TP-Link TL WA850RE repeater will distribute. How to set up and how to use - described below.

Appearance

The design of the repeater is quite simple, there are notes of minimalism. All lines are smooth, body is white. The device does not resemble a "brick" of a rectangular shape.

The device is made of glossy plastic. The TP-Link TL WA850RE repeater, reviews of which are quite good, is small, has a compact size.

On the front surface, you can see a button around which a ring of various inductors is installed. They are responsible for powering, connecting via a network cable, enabling repeater mode and working with an access point. An indicator is also installed that displays signal reception from the router. It is best to place the repeater where at least three lights are lit. Then the connection will be excellent and stable.

There is an electric plug, which many consumers note in the reviews.

In general, the design is not bad and most owners like it. Reviews testify to this. The TP-Link TL WA850RE wireless repeater will easily fit into any interior.

Filling

The repeater is powered by an Atheros controller. It is he who gives the right to function in networks such as b / g / n. Available to use 32 MB of memory. The maximum network speed is 100 Mbps.

Work with external antennas it is impossible, since they are not there, but two pieces are installed inside.

Setting up the TP-LINK TL-WA850RE repeater

How to configure TP-Link TL WA850RE? Carrying out the process of optimizing the repeater, it is necessary to choose its location correctly. The device must be installed where the Internet speed will be stable without loss or distortion. You also need to consider its localization in such a way that the received signal can cover all the necessary places in the house or apartment.

Setting up the repeater is carried out quickly, in just a couple of minutes. It is enough to plug it into a power outlet, find the WPS button on the router and press it. After that, a large key should be found on the repeater, on which there is a picture of the lock. How to understand that the device is working? The special RE code indicator will light up. The repeater will connect to the router in a second and start working.

In order to understand the signal level supplied by the router, you can pay attention to the built-in indicators. If there are at least three divisions, then the network is of high quality. For the most stable and convenient operation, it is necessary that the router shows at least two “sticks”.

When working with a repeater, the consumer does not even notice the device. The only noticeable indicator is a stronger Internet signal, which in certain places did not even appear before.

When you turn off the device from the power supply and carry it, you do not have to reconfigure the device. All this is confirmed by reviews. The TP-Link TL WA850RE signal amplifier remembers all the networks to which the owner connected it.

At the bottom, consumers may notice a special port required for networking. It is suitable for interacting with a computer or TV that does not have the ability to connect to a wireless network.

Connecting devices

Connecting to a repeater is pretty easy. It is enough just to click on the appropriate button, and everything will begin to function.

But there are other ways to connect (without the WPS key). Each device has its own control panel. It is she who will be needed to obtain a stable connection if the specified button is not on the router.

To open the control menu of this repeater, you will need to connect to it. This can be done both by cable and wirelessly. Immediately after this, an access point (factory) will appear, without a password. Even if the repeater has already been used (settings are saved), you will still be able to enter the panel only when connected.

Next, in the browser, you need to register the address tplinkrepeater.net. To enter account, you should refer to the instructions or look at the data on the official website. As a rule, they are standard and the same: admin.

Entering the repeater settings

After entering the control menu, you need to pay attention to home page. It will show all the data about the repeater and its status. If the repeater is configured, the owner will see the relevant information.

If the router does not have a WPS key, then settings should be made through this menu. You need to find the item "Master of Instant Options". It is there that you can access the fast TP-Link setup TLWA850RE. You need to go to the appropriate tab and click "Next". You should also select a region. The repeater will quickly find all the networks that are nearby and you need to find your own among them. Then - click "Next".

Connecting the TP-LINK repeater to a Wi-Fi network

After searching for your network, you need to specify the password for it. It is allowed to make a clone of this point, you can also rename it. Then you need to click on the “Next” button.

You should review all available settings, if they are correct, you must click "Finish". After that, the repeater will reboot. Then it will turn on already connected to the network.

Resetting the repeater

Sometimes it becomes necessary to reset the device settings. The reason can be many problems with TP-Link TL WA850RE. This is done by two different ways. The first is the easiest - just press the desired button on the repeater. It is enough to turn it on, take a knitting needle or some other sharp object at hand and click on the RESET key. After that, the owner will see that the indicators light up. The repeater will reboot and the reset process will be completed.

Through the control panel, this manipulation is also easy. It is enough to enter the menu "System Tools", "Factory Settings". There will be a Restore button. There will be a reboot.

If the internet is not working

Sometimes reviews of the TP-Link TL WA850RE describe a problem that there are problems with the signal. Often the repeater does not see the network, it happens that the connection occurs, but there is no access to the Internet. This problem is quite easy to solve in several ways.

You need to install a repeater closer to the router. As a rule, the problem is in the wrong location if a weak signal occurs. If the problem is that or the network itself, then you need to reset the settings. How exactly this is done is described above. Next, you should restart the device again and try to connect to the router.

If there are problems when making settings via WPS (for example, the router does not see TP-Link TL WA850RE), then you should use the control panel. This process also described above. You can also update the firmware as an experiment. Sometimes this solves the problem.

Another way is to change the channel of the wireless network.

Repeater Availability

This repeater can be purchased for a small amount - 1150 rubles. The cost is justified for such a device. This explains the popularity of the described repeater.

Testing

In the article we will also consider the operation of the device in practice. It is possible that additional shortcomings will be identified that are not mentioned in the reviews. TP-Link TL WA850RE performs well in testing. But more on that later. The feed network, its stability and speed are also described below. All data obtained when working with a router from Zyxel. Its maximum speed is 150 Mbps. The repeater and the device are compatible. A computer and a laptop work with the network.

To obtain more accurate data, it is necessary to change the operating conditions of the repeater. The three most relevant have been selected.

  • Operation in the same room.
  • Work with a distance of 20 meters from the router, there is an obstacle in the form of one brick wall. The signal is lost by about half.
  • Outdoor use. The parent point is set at a distance of 30 meters, there are two brick walls between it and the repeater. The signal is lost almost 100%.

Being in the same room, the repeater and router work at the same level, giving out an excellent signal without failures and interference. At a small distance from each other, they can interact with additional equipment (TV) that is connected via the LAN port. The video works perfectly even in streaming mode and from a flash drive. When operating with a loss of 50% of the signal, the picture freezes. The problem can be eliminated only by connecting a SmartTV to the Internet. Then there will be no interference.

The last, third point is of interest. How did the repeater cope in such a situation? We get stable and fast Internet, even if it was previously lost on a laptop. If during direct work with the router the data transfer rate was no more than 10 Mbps, then with a repeater this figure increases to 35.

It should be noted that in all cases the level of access to the network does not change. The difference is only in quality and its loss. It changes in three situations upwards. The repeater did an excellent job with all the conditions.

Unfortunately, due to the fact that it is not possible to work with external antennas, the repeater does not provide a large space in which to work with it. Ideally, it covers only one room. If an obstacle appears in the form of a brick wall, then the signal is reduced to a level of 80 dB, two - 50 dB. If there is a need to work with wireless access points, then this nuance must be taken into account.

Summing up the results of testing, it should be noted that in all the cases presented, the quality of the signal and communication in general has clearly improved. That is why we can say with confidence that the repeater copes with its duties with a bang.

Good afternoon everyone! Today our portal will tell you about such a repeater wifi signal like TP-LINK TL-WA850RE. Initially, I would like to note that a Wi-Fi repeater is a special device designed to transmit a Wi-Fi signal over certain distances (depending on the model and range). It is also a good way to amplify the signal if your native wifi router can't keep up, and some rooms in the house don't get wireless internet.

The essence of the article will be that we will go over the main characteristics of the repeater, its functionality, we will conduct a short course in its configuration and talk about possible problems and ways to solve them.

general information

So, we will begin our review with a brief review of the characteristics of the repeater. Our amplifier was released by TP-Link, belongs to the TP-Link Range Extender line of repeaters. It has several signal transmission standards - 802.11b, 802.11g and 802.11n (at a speed of 11 Mbps, 54 Mbps and 300 Mbps, respectively). The repeater operates in the 2.4 GHz band.

The repeater is relatively inexpensive (from 1000 to 1750 rubles apiece). Outwardly, it is a small white plastic box with a large button in the lower right corner of the back. The button itself is illuminated with blue LEDs, and additional diodes are turned on on the illuminated circle, displaying the quality of the signal (only five divisions) and its performance.

On the underside we have another Reset button and an Ethernet port, which gives us the ability to configure our repeater in any mode convenient for us - either through this port or using a wireless signal.

Basic repeater setup

Watch the video instruction for connecting the repeater in the following video:

Let's move on to the instructions for setting up the TP-Link TL-WA850RE. We have two ways: either through wireless connection or via an Ethernet cable.

Let's start with the wireless connection:

  1. Let's plug our repeater into the socket. Make sure the device is within range wifi work router.
  2. On the back of your router, press the button labeled WPS.
  3. Within 30 seconds after turning on the WPS mode, press the button on the back of the amplifier (there is a lock on it).
  4. Wait until the LED next to RE lights up.

It is worth separately explaining why it is needed:

  1. If it is lit constantly, then your signal amplifier is already connected to the network and has increased the signal coverage area of ​​​​the router.
  2. If it blinks, it means that it continues to connect to the router.
  3. If it is not lit at all, then the repeater is not connected to the router.

Now let's talk about connecting via Ethernet, or via cable. Its advantage is that through this mode of operation you can use the web interface for more precise settings. To do this, we need the cable that comes with the amplifier and a laptop or computer.

So, here's a little digression in stages:

  1. Plug the repeater into a power outlet, which is basically easy.
  2. Using an Ethernet cable, connect a laptop or computer to the repeater.
  3. In the address bar of any browser, type tplinkrepeater.net and press Enter. If that doesn't work, go to 192.168.0.254 ;
  4. In the open window, enter the factory login and password - they are indicated on the repeater case in the form of a label. If there is none, then the basic login and password are the word admin;


  1. After authorization, you will be prompted to carry out a quick setup. If you don't need it, or if you'll deal with it later, click Exit. To activate the quick setup mode, select the "Next" button;
  2. In the "Region" window, select "Russia" and click "Next";
  3. After you have selected the region, the "Wireless Settings" window will open, where you need to wait a bit until a list of all "local" Wi-Fi points appears;
  4. Find yours in this list. local network and check the box next to it, then click "Next". If your network is not in the list, move your repeater closer to the router or refresh the list several times by clicking on the "Refresh" button;


  1. After you have selected a local network, enter the network name, router password and select the mode in which the Wi-Fi network will work (either creating a network with a new SSID, or copying the Wi-Fi router operating mode);


  1. In the "Completion" item, carefully check the correctness of the data that you entered, then click "Finish";


  1. Wait for the settings to be activated.
  1. After such debugging, disconnect the laptop from the repeater and try to connect to Wi-Fi.

The TP-Link TL WA850RE repeater has the ability to work in two modes - repeater mode and adapter mode, and at the same time.

Fine-tuning the repeater

We are gradually moving on to a more precise setting of the access point. After all the steps above have been done, you can move on to a more user-friendly setting.

To do this, it is better to open the "Wireless Network" - there you can change the network name, password, repeater operation mode, region, network name, MAC address and channel width. Once the debugging has been done, you can safely click "Save".


If you want to put password protection, then go to the "Wireless Security" tab, and there select the level, protection version, password and type of data encryption. Those who may need MAC address filtering can use this feature, but most other configurations at home will not be of much use.

Just like on a Wi-Fi router, you can see who has connected to your network. To see this, do the following:

  1. Open the web interface of the repeater via a direct connection to it (Ethernet cable).
  2. Open the "Network" column.
  3. In the subsections of the "Network" item, find the line "List of DHCP clients" and open it. The window that opens will display everyone who has connected to the repeater and the data of these users - IP address, MAC address, and how long the user has been connected.

Amplifier problems

Also, problems with the performance of the repeater are not ruled out. The chance that this is a marriage is quite low, if not minimal. If the repeater does not want to work, you need to make sure of three things:

  1. The amplifier is within the coverage area of ​​your Wi-Fi network. It is best if the signal scale has 4-5 values ​​(LEDs on).
  2. Restart the repeater directly (unplug and plug back in).
  3. Perform a soft reboot (Web interface - "System Tools" - "Reboot").

If none of the items helped restore functionality, cancel the repeater settings. There are two ways here: through pressing the "Reset" button on the case or through user interface("System Tools" - "Reset Settings").

You can also try to update the software in the “Firmware Update” section, but for this you need to download the repeater firmware file from the TP-Link website to a laptop or PC. If none of the proposed solutions to the problem helped, then contact the service center.

A complete overview, information on setting up and updating the repeater can be found in the following video:

So, what can we say about the TP-Link TL WA850RE repeater . The repeater will help strengthen the signal and coverage area if your router is equipped with a weak module. The repeater will help increase the network coverage area up to 30 m. It is also effective in rooms with large quantity barriers in the form of walls and ceilings.

We hope our article was useful to you! All the best!