Menu
Is free
check in
the main  /  Advice / AMI BIOS update. Instructions for updating BIOS on a computer

AMI BIOS update. Instructions for updating BIOS on a computer

"BIOS" is the main system for I / O, as well as a full set of various programs. Its main purpose is to ensure the stable and high-quality performance of the computer equipment together with a variety of devices connected to it. The term itself is a fairly simple abbreviation "BASIC INPUT / OUTPUT SYSTEM". It is also responsible for such an important part of the PC, as the initial start and loading of the installed OS.

Without such software, it would not be possible to enter and display information from the computer. To date, the "BIOS" software has a wide functionality, which allows the user to install a password code for personal computer, specify the required date and time. BIOS also has a very useful featureWith which you can select devices used to download the OS.

"BIOS" is updated from time to time, gets new features and functions. However, it is worth noting that as such a "BIOS" update does not lead to any noticeable changes as a personal computer. But if the user has encountered an error, then in this case it is necessary to upgrade the program to more actual versionSince it will contain a fixing of many errors, as well as a useful increase in the total number of processors supported for interaction.

Note! There are several varieties of "BIOS", and various PC manufacturers prefer to install different software on their devices. But there are three main types: AMI (American Megatrends Incorporated), Award Bios (Award Software), UEFI BIOS.

Before the beginning of the procedure for updating this software, it is necessary to determine the user-existing one. For this you need:


In addition, before starting to update the aforementioned software, it is necessary to determine the version. For this it is worth:


Updating the "BIOS" version of the company AMI in Windows SEVEN

Before the start of the update, it should be understood that for each computer required different versions "BIOS". It depends on both the manufacturer and many other factors. Therefore, before updating to a more relevant version, you need to know the name of what is available, because it will be necessary to search for the necessary improvements. Depending on the operating system, the manufacturer of the computer and the motherboard, the actions necessary for the successful actualization of the "BIOS" medium can vary. So, to update this software, you should:

  1. Determine the version "BIOS", after which you open a web browser. In the search bar, enter the version specified in the settings and add the word "Update".

  2. Press "ENTER". In the resulting results, find the official website of the manufacturer of the motherboard, processor or the computer itself, on which links to download updated versions of the BIOS will be placed.

  3. Read the information on the page, explore the installation instructions and update the aforementioned software.
  4. After making sure "BIOS", start the download process of the necessary file by clicking the "Download" or "Download File" button.

  5. Close all programs on your computer and run the previously downloaded file with the update using double click on it with the left mouse button.

  6. After starting the program, a window appears with a notification of changes made to "BIOS", and the requirements for installation, where it will be necessary to click "OK" or "Next".

  7. Another area appears in which the list of changes and differences will be specified in the existing version of the program and the updated. Click "OK" to start the process.

  8. During the update, the computer will pass the reboot process, after which the installation of new components will start. Recommended at the end of the update reboot PC.

Note! Before the update, you must close all possible programs and processes. In addition, it is impossible to interrupt the actualization procedure in any case, as well as turn off the PC from the network, because this may lead to failure of the entire system. Update for AMI BIOS can be found on the official website of the company - ami.com.

The BIOS update is a complex process that needs to be performed, possessing all information about its own personal computer. Without information, try to update "BIOS" or change it in no case, as this can lead to irreversible consequences. First of all, you need to get acquainted with the installed similar software on your computer, after which you know the version of the motherboard. After collecting detailed information You can start searching for relevant update files on the Internet. It is recommended to use only the official sites of developers, since you are guaranteed to get a high-quality and secure update. If you use third-party sites, then it is possible to infect the computer with malicious programs or completely break the system.

Video - AMI BIOS Update

PC must be constantly updated. Moreover, it is not only equipment, operating system and applications. But this is desirable to do this only when seriously needed.

If the machine works in normal mode without glitches and errors, then update to latest version BIOS is simply not required. Since this procedure is extremely unsafe.

Why update

The new firmware under consideration is required:

  1. the new installed device is not supported;
  2. when a conflict arises with any application that you want to install on a personal computer;
  3. when it is necessary to increase PC performance;
  4. if the outdated firmware is damaged.

Most often an update is required due to the installation of new equipment - processor, hard disk. Much less often - video cards, random access memory. Such a need arises as a result of conflict between equipment and firmware. Very often old bios simply do not see hard drives Large volume. This situation is corrected in most cases to the update.

Some applications do not support working with defined bios and their programs. In most cases, this situation can be resolved by updating the version. Sometimes it is required to launch some professional applications.

Often old firmware simply do not allow to disperse the processor in various ways. If it is necessary to change the CPU frequency in the most side or to file a greater voltage to it, you must perform the BIOS update. This usually provides ample opportunities for manipulations from various kinds with parameters. central processor and other devices.

Sometimes the PC begins to issue errors just like that, without apparent reason. Often the guilty of this is BIOS. Allow problems of this kind in many cases allows you to install new program in bios.

Video: reflash bios

Current version

Determine the BIOS version in several ways:

  1. before starting the OS;
  2. using the operating system;
  3. with third-party software.

In order not to waste time on any unnecessary actions, the PC owner can simply see the software labeling of the device under consideration before Windows starts.

To do this, it is necessary to perform in strict accordance with:

  1. turn on the PC;
  2. wait for the appearance of the appropriate icon ("American Megatrends", "Energy" and more);
  3. click on the button called "Pause Break".

This key allows you to stop loading a personal computer at any stage. The appearance on the table or list of characteristics should be waited. The user needs to find the inscription "Bios Revision" or "Bios Version". Next to one of these phrases must be a combination of numbers. These are these numbers and denote the version of the BIOS used.

You can also find out the software labeling of the PC component in question simply by going to the settings.

To do this, do the following:

  • turn on the computer;
  • before the image appears, press the "Delete" key several times;
  • in the section called "Main" find item "Information" -\u003e "Version".

The most simple I. safe way Finding out the version is the use of the item in the "Start" button called "Run".

Next steps:

  1. open "execute";
  2. in the field that appears, enter "MSINFO32";
  3. click on "Enter" or just click on "ok".

As a result, the standard component of the Windows operating system opens. It contains all information about the system, including information on the BIOS firmware.

How to update the BIOS on the computer

Update the software for the device under consideration can be three ways:

Each method has both their advantages and disadvantages.

Where to get an update

To update the BIOS, you must first find the desired application for this PC component. It is best to download it from the official website of the maternal or BIOS manufacturer. The most correct way to find out the model and the name of the manufacturer of the computer components is the visual inspection of the motherboard itself located on it the chip of the updated device.

You can also use any specialized program in order to find out the firmware marking and the manufacturer name. It is best for this that is suitable for Everest. The most important dignity this application Before the analogs is that it offers the user links to the official sites of the manufacturer's company, where you can detect everything you need.

Another source of new versions of the firmware can be various informal sites on the Internet. But the likelihood of downloading counterfeit software with a virus or simply does not work that can damage the PC is very large. Therefore, the use of applications from unreliable sources is extremely recommended.

Making a backup

Before carrying out any actions that make changes to the firmware, it is necessary to make it a backup. This will avoid various kinds of problems when an error occurs does an inoperable hardware. A backup must be saved to an external medium (USB disk, flash drive, a floppy disk) in order to avoid the need to extract it from the hard disk.

The easiest way to make a copy of the software to be updated, using the application called EZ Flash (applied to ASUS).

The copying process consists of the following main steps:

  1. manufacture of the loading flash drive with the MS-DOS operating system;
  2. inserting a flash drive to the port, you must restart the PC;
  3. after clicking on the "Delete" key, during the download, you should find the Tool tab;
  4. select ASUS EZ 2 Utility;
  5. press the "F2" key and enter the name backup.

After executing all the above operations, all the data required for recovery will be saved on the selected media. If necessary, they can easily use.

Installation

Most simple way is the installation of a new software on the Personal Computer component in question directly to operating system Windows.

To do this, you must perform the following actions:

Most manufacturers have a UPDATE application. That is why it is necessary to use only files downloaded from official resources. For example, the ASUS application for the implementation of the under consideration is called AsusUpdate. It is installed as the most normal applicationThe menu is intuitive, even if it is in English.

Some manufacturers provide for updating their products without entering the OS. Special tools are already sewn into the equipment ROM to perform UPDATE. For example, the ASRock Instant Flash utility can in minutes independently carry out all the necessary actions. It is enough just to click on "F6" - it will scan all available sources of information.

Reset system settings

Reset system settings in two ways:

  • software;
  • hardware.

To use the first method, it is necessary:


To reset hardware, you must use a special jumper or at least 30 minutes to remove the battery from a special connector. After carrying out the necessary actions, a reboot is performed.

Possible problems

When installing new versions of the firmware, various kinds of errors may occur:

  • missing versions;
  • error writing data.

Most frame problem It is the use of unsuitable files to implement UPDATE. If there is a problem of this type, you need to return the system to the backup the initial state. If the data record error occurred, then it should be done in the same way - to reset the settings to the standard.

Video: Update BIOS

When implementing the type of type, it is necessary to make sure that the stability of the supplied voltage. If a electricity It will be turned off suddenly, then the likelihood of strong damage to the updated component is large. What is unacceptable.

It is important to use firmware only from reliable sources. Since there is always the likelihood of presence in foreign data bookmarks or viruses. All this may damage the computer. It is also necessary to check the service of the battery-tablet inside the system unit.

Many users do not understand why update the BIOS. Must be performed this operation Only in extreme cases when it is not possible to resolve any conflict alternatively. The procedure should be made as cautiously as possible to avoid the occurrence of damage.

BIOS - firmware responsible for the initial windows download. It checks the performance of components and add-ons. It depends on the correct loading of the computer and its normal operation (hardware components).

It is recorded on the motherboard, and not on the hard disk as OS. In new devices, the BIOS is replaced by UEFI, which performs the same functions, but improved. Both programs are sometimes required to update.


BIOS can be updated in several ways.

Do I need to update the BIOS?

Update for laptop Manufacturers are released regularly. It is downloaded on the official website of the company, which produced a laptop. It is more difficult to possess the PCs of their own assembly. To find files to update them will have to be repelled from the data of the motherboard chip. Any update is also recorded on the chip, replacing the old version.

Refresh BIOS properly is easy, but only materials developed for a particular PC model or board should be used. Each motherboard has a strictly defined variety of firmware, and the installation of its incorrect version is able to lead to violations of the computer or its complete inoperability.

BIOS is a thin program, and therefore updating it better only in extreme cases. No need to update it on the normally functioning PC. This is associated with several factors:

  • To flash the BIOS on the Maternal Asus motherboard or any other difficult, the process requires some skills, the process goes through DOS;
  • Improvements will not be noticeable, since the differences in versions are minimal and narrowly specialized;
  • Perhaps the occurrence of problems and disruption, because old version Tested carefully than new;
  • When conducting work, electricity should not be disconnected, otherwise the device will stop loading.

But sometimes you need to update the BIOS. If you regularly encounter one or another error in your work, go to the device manufacturer's website and check whether such an error is eliminated new version firmware. More often on the sites of manufacturers there is such a list. If such a problem is really solved in the new version, it makes sense to update the BIOS on a laptop.

Another weighty reason to flash BIOS is to install a new equipment. If you have acquired a new processor, which appeared after the release of your motherboard, it will not be supported by your BIOS. In new versions for firmware, manufacturers add support for new types of processors, and therefore will have to download such a file and flash the firmware.

Update BIOS is needed as a last resort. But even then, before updating, read the characteristics of the new version and find out whether the problems solved in it. Based on this and conclude whether to update the BIOS.

Find out the current version by climbing Win + R on the keyboard. In the window that opened window seems MSINFO32 for 32-bit OS. Click the Run button. A window will open with the enumeration of hardware and OS - device characteristics. Among them are finding the necessary.

Sometimes a notification appears that the outdated BIOS mode. This means that the operation of the BIOS is outdated, it still works in real, and not secure mode. The firmware may not help solve the problem, but it is not serious and eliminated not necessarily.

Methods of updates

The update method depends on the manufacturer of the computer, the model of the motherboard, etc. Most often, each manufacturer has its own refreshing instructions. You can get acquainted with it on the official website of the company.

On all modern motherboards or you can update the BIOS on your computer any of these ways. But it is better to choose the latter, as it guarantees the minimum number of errors.

Algorithm update

Refresh bios Asus. or any other modern laptop, you can any of the three methods described. They have their own nuances, but when carrying out a process using utilities, are still not difficult.

From DOS.

Complex option with big risks. To update the BIOS on windows Computer 7 Do the following:

  1. Learn the model of your motherboard;
  2. On the official website of the manufacturer, download the desired firmware version;
  3. They are sometimes somewhat. In this case, choose the one that is intended for installation in DOS mode;
  4. Create blood flash drive with bios, doss and additional utility (it is downloaded on the manufacturer's website or enters the archive with the firmware);
  5. Install the USB flash drive and restart the computer;
  6. Specify the carrier on which bIOS firmware motherboard;
  7. After completing flashing, restart the PC.

More precisely, the instructions are not, as it varies for different PCs and boards. Detailed instructions Find on the manufacturer's website. But it is not recommended to use this method.

From windows

Rebuild the BIOS on a laptop in such a way easy. Errors rarely occur. Popular method.

  1. Download the firmware utility. She is its own for each manufacturer. The program for updating the BIOS ASUS - ASUS UPDATE, MSI - Live Update, etc.;
  2. Install the program;
  3. Run;
  4. Find the online function - search for new firmware. IN different programs it is in different groups of teams;
  5. From the list of firmware, choose the necessary one;
  6. Activate downloading;
  7. After downloading, run the flashing and follow the instructions of the program.

The BIOS ASUS, MSI firmware and others are safe in this way and therefore, the program itself selects the appropriate firmware version. In addition, an intuitive interface will help perform the firmware not even an advanced user.

From bios

Rebuild the BIOS on a laptop from the firmware is due to the pre-installed utilities. This is a difficult way, as it differs depending on the motherboard chip model, the manufacturer, etc. To update the BIOS on the Gigabyte motherboard, run the pre-installed @BIOS utility, from other manufacturers - other programs. Such programs are similar to utilities involved in the previous method, but not so comfortable. They work with them also - find the necessary file on the network and run.

More often, the method is used in the breakdown of the computer when it is impossible to enter the OS, because PC is not loaded.

The Process IS The Second Part in the Series on the Amibios.

ATTENTION!

I Strongly Advise Reading Through This How To Article First, Before Attempting a Bios Update.

If You Are Still Unsure, Please Do not Attempt to Update. Contact Your Local Computer Repair Shop, OR Call Your Computer Makers Support Line for Advice.

Part 1 Introduces You to the, The Beep Codes If There Is a Fault, And The Bios Setup Utility.

There Are 3 Steps In The Amibios Update Process. Listed Below Is a Link to Each Part.

Step 5 Gives You The Opportunity to Share Your Expertise of Bios Updates. Is it a good iDea or not? Do You Know of a Better Way to Update Computer BIOS PROGRAMS?

Motherboard IDENTIFICATION

There Are Different AMIBIOS Products on Different Computer Systems. Most Computer Makers Change The Amibios Code to Suit Their Own Computer Models.



The Image Below is From The Ami Web Site, And Shows You How to Identify Whether Your Home Computer Has a Native AMI Approved Motherboard or Not.



Where IT SAYS "BIOS FROM 1991-PRESENT", There Is a Reference to Ami and The Motherboard Type, If It IS A Ami Approved Motherboard.

This reference Looks Something Like: AMIS875-P., Signifying AN. Series S875 AMI Motherboard (IT Actually Says AMI123-P on The Image Above AS An Example).

If You Computer Does Not Have An AMI Reference, Refer to Your Computer Providers Web Site for Guidance. IF You Require More Details On This Step, GO TO THE AMI BIOS (OPENS NEW Window) Web Page.

If you don "T Understand this step. Don" T Worry! Download The Amibid (Opens New Window) Motherboard Identification Tool. Simply Install and Run On Your Computer.

AMIBIOS ROM AND FLASH UTILITY

If You Determine You Have An Ami Motherboard, Download The Ami Firmware Update Tool (Opens New Window).

Unzip The American Megatrends Bios Update Utility. GO TO THE Afuwin. Folder (Under the Amibios Parent Folder), Then Either the 32-bit or 64-bit sub-folder. Left Click. Afuwin.exe.

Click OK If This Disclaimer Appears.


AMIBIOS UPDATE FLASH WARNING


Click The Open Button to Search for And Select The Rom File You downloadded from Your Motherboard Manufacturers Web Site.


Note.

Click Save to Take A Copy of Your Existing Bios Settings. If Anything Goes Wrong You Have An Option To Restore!


(If It Doesn "T Restart for You).

Your Bios Is Now Updated to the Latest Version. Refer to the Support Web page If Further Support Is Required.

American Megatrends Bios Update
Final ThoughtS.

Their American Megatrends Bios Update Process Is a Little Complicated. I Hope The Information Provided On This Web Page Is Useful. Good Luck With Your Bios Update.

A: AMI FAQ (Opens New Window). IT EXPLAINS COMMON QUESTIONS AND ISSUES VERY CLEARLY.

Don "T Forget to Take a Look At of this Tutorial Series, Which Introduces You to the Bios Concept, AMIBIOS BEEP Error Codes and The Bios Setup Utility.

Hello dear blog visitors! Today I decided to update the BIOS on my computer and write about it to the blog. Moved photos and screenshots, so the article will be interesting and most likely big, well, nothing terrible, but clear :).

About system Bios. I have already written many articles, and if you want to know what BIOS is, then read this article. I have a little ancient computer :), and I have not updated BIOS on it yet, so I decided that the update should be. Now we will look at how to determine which motherboard is installed on your computer, where to look for updates for BIOS, how to update bios. and decide possible problems in the update process.

Why update the BIOS?

Well, here I think everything is clear. Updates will almost always allow to improve the operation of the devices, and the BIOS is still the same. After the update it is possible to appear new features, the stability will increase, support new technologies and components will appear. In short, you need to be updated, and it is better to do it often.

Immediately I want to say about the danger of updating the BIOS system. You need to do everything carefully and according to the instructions, in the event of some failure there may be bad consequences. Although this method of updating about which I will write today, it seems to me all risks to a minimum.

System board and BIOS version

Before you begin to update the BIOS, we need to find out which motherboard and the bios version is installed on our computer. Because to download updates. We will be from the manufacturer of the motherboard.

For this we need a program Everest., you can download it on the Internet by typing in search engine Request "Download Everest". Install the program and run it. If these actions seemed very difficult to you, then you better not update the BIOS on your own, and if you really want to contact the computer service.

Well, if everything is fine, then we run Everest, go to the tab "Motherboard" And we look at what motherboard is installed on your computer.

As you see my motherboard MSI MS-7267 But for her we will look for Bios updates. Below I allocated a link that leads to the download page of different updates from the manufacturer's website. Go through this link, and also open the BIOS tab in the Everest program, in order to see which firmware version is installed.

After the firmware, we will compare these dates and the version. As you can see, I have a version of Bios since 2007, and a video adapter in general since 2005. We will be updated :).

Where to get updates for BIOS?

Now we return to the manufacturer's website of the motherboard, I have this site MSI, I opened it by reference in the Everest program, but it can be found just through the search. Or immediately the Russian version of the MSI RU.MSi.com/Service/download/ site downloads.

As you can see there there are three options for finding updates.

  • The first way to request MSI MS-7267 did not give me any results, probably because the motherboard is already old.
  • In the second way, I did not even use, because it is immediately written that the option for new models. If you have a new product, you can search for it in the list.
  • Well, the third option allows you to download the utility that scans your computer and give a list of necessary updates, with the possibility of downloading them. Excellent! Press "Click here" And click "Open."

Archive will open, run it in it installation file LiveUpdate.exe and a few steps set the Live Update 5 utility.

After the installation is completed, we start it and click on the "Scan" button, wait a few seconds until the utility is looking for updates.

The program will give a list of results. We are interested in updating with the name "MB BIOS". If this update is in the list (usually it is at the very top), then there is a BIOS update for our motherboard. Download it to your computer by pressing the "Download" button.

It is better to click "Browse", and choose a place to save the update file itself. For example, I saved on the desktop.

All, the update file for the BIOS now we have, now you can cross the next stage.

Run the saved file with the BIOS update and follow the instructions.

Click "Next".

We continue ...

There are two options: first, it is probably to write the image of the firmware on USB flash drive, and update the BIOS from the flash drive (or for the firmware, if you cannot update from under Windows). But since I did not have a free flash drive, I chose a second option, which judging by the header means the firmware of the bios from under Windows.

Here we need to burrow the working programs and click "Next".

Press any key. The computer must reboot. That's all, BIOS updated!

Problems after updating BIOS

I had two small problems that I think it is worth writing.

1. Immediately after the first reboot, a black window appeared with white text (unfortunately not photographed), in which it was necessary to click F1 like to configure. And F2 to download optimal BIOS settings. I clicked F2, and this message no longer appeared.

2. The second problem is the absence of a disk A :.

You can simply press F1, but this message will still appear. Just the computer does not find a Disk A: This is a differential, I do not have it, but it is specified in BIOS. This error I appeared after. Disable it very simple.

Go to the section.

We bring the cursor to the item and click "Enter".

Select from the list, click "Enter".

We save the changes by pressing the F10 and confirm the saving settings. We leave from the BIOS by clicking on "ESC".

Well, all your friends, BIOS updated, problems eliminated, computer I hope it works :).

At the beginning of the article, I posted my screenshot from the Everest program, with the BIOS firmware version before the update. Let's see what has changed there.

As you can see, everything is updated. Although the year of release of the 2009 update, but this is due to the fact that I have no outdated motherboard and updates for it are no longer produced.

I hope you all happened. Good luck friends!

More online:

Updated: January 12, 2015 by the author: admin.