the main / Advice / What does not support the interface in the crack. How to fix the EXE error

What does not support the interface in the crack. How to fix the EXE error

An error appeared on some computers: explorer.exe "Interface is not supported". Not a rollback of the recovery point, not updated did not give positive results. After the error is departing, the system began to behave terrible: the programs stopped working (EXE was not simply not fulfilled), the conductor did not open - in general, to debug and find out the reason did not succeed

The problem was DLL libraries. Solutions are several. On one computer will help one, on the other - the other:

The first solution to the problem "Interface is not supported" in Windows 7

Create .bat.. Run it on behalf of the administrator and after restart the computer:

REGSVR32 COMCAT.DLL / S REGSVR32 CSSEQCHK.DLL / S REGSVR32 SHDOC401.DLL / S REGSVR32 SHDOC401.DLL / I / S REGSVR32 ASCTRLS.OCX / S REGSVR32 OLEAUT32.DLL / S REGSVR32 SHDOCVW.DLL / I / S REGSVR32 SHDOCVW.DLL / s regsvr32 browseui.dll / s regsvr32 browsewm.dll / s regsvr32 browseui.dll / I / s regsvr32 msrating.dll / s regsvr32 mlang.dll / s regsvr32 hlink.dll / s rem regsvr32 mshtml.dll / s regsvr32 mshtmled. DLL / S regsvr32 urlmon.dll / s regsvr32 plugin.ocx / s regsvr32 sendmail.dll / s Rem regsvr32 comctl32.dll / i / s rem regsvr32 inetcpl.cpl / i / s Rem regsvr32 mshtml.dll / i / s regsvr32 scrobj .dll / s regsvr32 mmefxe.ocx / s rem regsvr32 proctexe.ocx mshta.exe / register / s regsvr32 corpol.dll / s regsvr32 jscript.dll / s regsvr32 msxml.dll / s regsvr32 imgutil.dll / s regsvr32 thumbvw.dll / S regsvr32 cryptext.dll / s regsvr32 rsabase.dll / s Rem regsvr32 triedit.dll / s rem regsvr32 dhtmled.ocx / s regsvr32 inseng.dll / s regsvr32 iesetup.dll / i / s rem regsvr32 hmmapi.dll / s regsvr32 cryptdlg.dll / s regsvr32 ACTXPRXY .dll / s regsvr32 dispex.dll / s regsvr32 occache.dll / s regsvr32 occache.dll / i / s regsvr32 opeers.dll / s Rem regsvr32 wininet.dll / i / s regsvr32 urlmon.dll / i / s Rem regsvr32 Digest .dll / i / s regsvr32 cdfview.dll / s regsvr32 webcheck.dll / s regsvr32 mobsync.dll / s regsvr32 pngfilt.dll / s regsvr32 licmgr10.dll / s regsvr32 icmfilter.dll / s regsvr32 hhctrl.ocx / s regsvr32 inetcfg .dll / s Rem regsvr32 trialoc.dll / s regsvr32 tdc.ocx / s regsvr32 msr2c.dll / s regsvr32 msieft.dll / s regsvr32 msieftp.dll / s regsvr32 xmsconf.ocx / s regsvr32 ils.dll / s regsvr32 msoeacct. DLL / S rem regsvr32 wab32.dll / s rem regsvr32 wabimp.dll / s rem regsvr32 wabfind.dll / s rem regsvr32 oemiglib.dll / s rem regsvr32 directdb.dll / s REGSVR32 INETCOMM.DLL / S rem regsvr32 msoe.dll / s rem regsvr32 oeimport.dll / s regsvr32 msdxm.ocx / s regsvr32 dxmasf.dll / s rem regsvr32 laprxy.dll / s regsvr32 l3codecx.ax / s regsvr32 acelpdec.ax / s regsvr32 mpg4ds32.ax / s regsvr32 voxmsdec.ax / s regsvr32 danim.dll / s regsvr32 daxctle. ocx / s regsvr32 lmrt.dll / s regsvr32 datime.dll / s regsvr32 dxtrans.dll / s regsvr32 dxtmsft.dll / s rem regsvr32 vgx.dll / s regsvr32 WEBPOST.DLL / s regsvr32 WPWIZDLL.DLL / s regsvr32 POSTWPP.DLL / s regsvr32 CRSWPP.DLL / s regsvr32 FTPWPP.DLL / s regsvr32 FPWPP.DLL / s rem regsvr32 FLUPL.OCX / s regsvr32 wshom.ocx / s regsvr32 wshext.dll / s regsvr32 vbscript.dll / s regsvr32 scrrun.dll mstinit .exe / setup / s regsvr32 msnsspc.dll / sspccreatesspireg / s regsvr32 msapsspc.dll / sspccreatesspireg / s regsvr32 licdll.dll / s regsvr32 regwizz.dll / s regsvr32 softpub.dll / s regsvr32 iedkcs32. DLL / s regsvr32 MSTIME.DLL / s regsvr32 WINTRUST.DLL / s regsvr32 INITPKI.DLL / s regsvr32 DSSENH.DLL / s regsvr32 RSAENH.DLL / s regsvr32 CRYPTDLG.DLL / s regsvr32 Gpkcsp.dll / s regsvr32 Sccbase.dll / S REGSVR32 SLBCSP.DLL / S

The second way to solve the problem "Interface is not supported" in Windows 7 found on the Internet

1. Start the command prompt on behalf of the administrator.
2. Enter CD \\ and press input.
3. Enter DIR * .DLL / S / B\u003e REGDLL.BAT and press input (this is to copy all paths to the library to the file).
4. Enter the NotePad RegDLL.Bat and press the input, the notepad will open with this file.
5. B. command line Enter PATH and press the input, copy the current paths and save somewhere into the file.
6. Enter Path \u003d C: \\ Windows; C: \\ Windows \\ Command; C: \\ Windows \\ Program ~ \\ Accessories and press input.
7. Check new ways by entering the command P.5.
8. Enter C: \\ Windows \\ System32 \\ regsvr32.exe / s C: \\ and press input if the message "The system cannot find the specified path will appear.", Introduce C: \\ Windows \\ System \\ regsvr32.exe / s C : \\.
9. In an open in a notepad file, replace all the entry C: \\ on C: \\ Windows \\ System32 \\ regsvr32.exe / s C: \\ (C: \\ Windows \\ System \\ regsvr32.exe / s C: \\). Save file.
10. In the command line, enter REGDLL.BAT. Re-registration will start. Will will be long. At the same time, the system can "wonder" on enough long time. If nothing changes in the command line more than 3-4 minutes, then you need to complete the REGSVR32 process in the task manager (in the 64-bit system - more and REGSVR32 * 32).
Errors may occur. Enough to press "OK".
11. After that, in the command prompt, enter the value saved in P.5.

An error appeared on some computers: Explorer.exe "Interface is not supported." Not a rollback of the recovery point, not updated did not give positive results. After the error is departing, the system began to behave terrible: the programs stopped working (EXE was not simply not fulfilled), the conductor did not open - in general, to debug and find out the reason did not succeed

The problem was DLL libraries. Solutions are several. On one computer will help one, on the other - the other:

The first solution to the problem "Interface is not supported" in Windows 7

Create.Bat. Run it on behalf of the administrator and after restart the computer:

The second way to solve the problem "Interface is not supported" in Windows 7 found on the Internet

6. Enter Path \u003d C: \\ Windows; C: \\ Windows \\ Command; C: \\ Windows \\ Program ~ \\ Accessories and press input.

7. Check new ways by entering the command P.5.

8. Enter and press input if the message "The system cannot find the specified path will appear.", Introduce C: \\ Windows \\ System \\ regsvr32.exe / s C: \\.

9. In an open in a notepad file, replace all the entry C: \\ on C: \\ Windows \\ System32 \\ regsvr32.exe / s C: \\ (C: \\ Windows \\ System \\ regsvr32.exe / s C: \\). Save file. 10. In the command line, enter REGDLL.BAT. Re-registration will start. Will will be long. At the same time, the system can "think" for quite a long time. If nothing changes in the command line more than 3-4 minutes, then you need to complete the REGSVR32 process in the task manager (in the 64-bit system - more and REGSVR32 * 32). Errors may occur. Enough to press "OK".

11. After that, in the command prompt, enter the value saved in P.5.

Other publications:

artkiev.com.

"Interface is not supported," how to get rid of?

Hi friends. For several weeks already passed, as I updated to the new Windows 10. Well, what to say, the new system is completely satisfied with me, and as in my opinion, it looks well. Even a basket, which I don't like everything, just because of the fact that there is a slightly similar to a basket from Windows 98, no disgust causes.

But all the same, recently, I ran into the first problem on the new Windows 10. When you try to start any program, I began to pop up an error - "The interface is not supported." But to be honest, I have a suspicion that this error It appeared as a result of installing one utility that I ran literally before the appearance of this problem. So that, new system I did not blame.

So, starting looking for the error correction path, the "Interface is not supported", I first of all, of course restarted the computer, but the result did not bring it. Then, I decided to try to restore the system to an earlier state, but as it turned out, while trying to launch the recovery of the system, this message was displayed before me.

But the relationship with the fact that I have a second account on my computer, I went to it to check if there was such a problem there. After booting, I launched the browser, the regular page load started, which means that here (on this account), everything is fine. And so, how everything works here, this means that by creating a new account, the problem will disappear, but this option The error solutions "Interface is not supported", I did not come up, because on my profile there are a lot of different programs in which a lot is stored important information for me. Therefore, I started looking for advice and recommendations on the Internet that could help me get rid of this problem.

Looking in advance, I will say that I managed it, but at the same time, I tried a lot of different options, and the units were really intelligent. Therefore, now, I will share the topic with you with advice, which really helped me will get rid of the error "Interface is not supported"

Error Correction "Interface Not Supported"

1. The first method is the easiest and most convenient. This method is simple because you will need, just download the fix-file already prepared by Microsoft and install the ego on the computer. But minus, this option is the fact that this fix is \u200b\u200bcompatible only with Windows 7 and 8.1.

And as I updated to the new tens, I had alert that this operating system is not supported, well, I continued to search. (For those who have Windows 10, we immediately go to the second item, if you have a seven then read further).

Now, download the next archive in which the registry file lies. Running it, we will restore the EXE file association. After, as in the previous time, do not forget to restart the computer, to apply all changes.

Personally, I have everything worked only after the execution of both files, but many have enough to launch only the first batch file and restart the computer. So try, test, I will definitely share the results in the comments.

3. Well, finally the third option is to create a new user. If you have helped anything with the above words described and the error "Interface is not supported", it still appears, then it is the creation of a new account with a one hundred percent way.

To do this, click on the computer with right mouse button, and select the "Management" item.

In the window that opens, specify the name of the new account, and at the request of the password. Also, do not forget to remove the checkbox "Require a password change", and click "Create".

On this, all, restarting the computer, you can already boot from a new account. After transferring data, you can optionally remove it in the same menu "Users", where choosing the not necessary account, delete it with the "DEL" key or using the Delete item.

These are the methods that seemed to me really workers. Be sure to try to do everything in turn and you exactly get rid of the error "Interface is not supported." In any case, if we leave comments, and I will try to figure out and help with solving your problem.

inforkomp.com.ua.

Error: "Interface Not Supported" in Windows 7 (explorer.exe) »MS Windows» Blog of useful articles on the development and promotion of sites

After installing some programs (Photoshop, Illustartor and other) when you try to change the screen resolution by clicking the right button on the desktop, an explorer.exe "Interface is not supported" error appeared ("No Such Interface Supported"), the same thing happened in some other cases , for example, even when changing the icons on the "My Documents" icon. At the same time, some control panel items ("Delete programs" including) have been opened. Some have stopped running EXE files, BAT files and so on. The problem was in libraries (DLL). In order to eliminate it, you need to re-register all libraries or simply create a new user. But sometimes the creation of a new user is problematic in the sense that a lot of settings are stored on the current user. windows systems 7.

Re-register DLLs Next way:

Just in case you create a backup system.
To start the command line with administrator rights (for this, right-click on the desktop-\u003e Create-\u003e Label, in the Enhancement CMD field, then on the label right-click\u003e launch on behalf of the administrator).
Enter CD \\ and press input.
Enter DIR * .DLL / S / B\u003e REGDLL.BAT and press input (this is to copy all paths to the library to the file).
Enter NotePad RegDLL.Bat and press the input, the notepad will open with this file.
In the command prompt, enter the path and press the input, copy the current paths and save somewhere into the file - it will be needed to us in the last paragraph.
Enter Path \u003d C: \\ Windows; C: \\ Windows \\ Command; C: \\ Windows \\ Program ~ \\ Accessories and press input.
Check out new ways by entering the command P.5.
Enter C: \\ Windows \\ System32 \\ regsvr32.exe / s C: \\ and press input if the message "The system cannot find the specified path will appear.", Introduction C: \\ Windows \\ System \\ regsvr32.exe / s C: \\ In the file open in a notepad, replace all the entries: \\ on C: \\ Windows \\ System32 \\ regsvr32.exe / s C: \\ (C: \\ Windows \\ System \\ regsvr32.exe / s C: \\). Save file.
In the command line, enter REGDLL.BAT. Re-registration will start. Will will be long. At the same time, the system can "think" for quite a long time. If nothing changes in the command line more than 3-4 minutes, then you need to complete the REGSVR32 process in the task manager (in the 64-bit system - more and REGSVR32 * 32).
After that, in the command prompt, enter the predetermined value.
If errors occur in the course of execution - we skip them down the "OK" button

FAQ # 196. We answer your questions! - "Hacker"

Other publications:

artkiev.com.

Usually, when a similar error occurs, the problem turns out to be in the DLL libraries. To eliminate it, you need to re-register them. To do this, run the command line on behalf of the admin and perform there:

CD \\ dir * .dll / s / b\u003e Regdll.bat

So we will copy all the ways to the libraries to the Batnik. Now let's see what we have in Path:

The output of the command save yourself in a text file and enjoy:

Path \u003d C: \\ Windows; C: \\ Windows \\ COMMAND; C: \\ Windows \\ Program ~ \\ Accessories

After changing the paths

C: \\ Windows \\ System32 \\ REGSVR32.EXE / S C: \\

If Windows swears "The system fails to find the specified path", we enter

C: \\ Windows \\ System \\ regsvr32.exe / s C: \\.

Open our batch file in Notepad and replace all the entry C: \\ on

If Windows swears "The system fails to find the specified path", we enter

Sew and launch Regdll.bat. Re-registration will go for a long time, can hang, give the mountain errors, in a very difficult case - to kill regsvr32 processes, and in the 64-bit system - also regsvr32 * 32. After finished, enter Path with your parameters that you previously saved. Also often happens that it does not go out to open a console or save the batch file, try to load in safe mode and run processes through the task manager.

To do this, you can use the team of the species.

In a similar way, you can make the opposite action, that is, encode the string you need:

Echo "Base64" | Base64.

As you can see, nothing complicated, but by writing a simple wrapper on the same python - you can even quickly make such transformations, without referring to various online decoders.

In principle, yes, there is such a couple. Here, for example, in MyScript Calculator you can draw a formula yourself, and, as the developer declares, after that the application begins to make his magic conversion of characters and numbers into a digital text format and provides the result in real time. From supported operators there are:

Basic mathematical actions: +, -, x, ÷, +/-, 1 / x Other steps:%, √, x!, | X | Establishment / Exhibitors: ℯX, XY, X2 brackets: () Trigonometry: COS, SIN, Tan Pantry Trigonometry: ACOS, ASIN, ATAN Logarithm: LN, LOG Constants: π, ℯ, PHI

No less interesting is the PHOTOMATH application, it allows you to solve the equations by simply deploying the chamber on the formula. The developers are constantly improving something and increase the functionality of the application, but do not expect special miracles. Especially if you have gone for the second year of the tower or what is faster.

Photomath

To do this, it is enough to use a similar team:

MD5SUM disk.iso.

Or you can use the DD utility:

DD if \u003d / dev / cdrom | MD5SUM.

When dVD records You need to make an additional action. This is due to the fact that, when recording on DVD, service information is also written, so to check the DD utility DD, you need to accurately indicate the size and number of blocks. In order to find out how much significant blocks (extensions) are available in ISO-image, perform:

Echo $ (($ (LS -L Disk.iso | AWK "(Print $ 5)") / 2048))

The result will be the number of blocks, this number we will substitute to the DD command. Suppose we got 159381, then the team will look like this:

Dd if \u003d / dev / cdrom bs \u003d 2048 count \u003d 159381 | MD5SUM.

HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ NETWORKPROVIDER \\ HWORDER \\

We need to edit the ProviderOrder parameter:

WDNP32, Snacnp, RDPNP, LanManworkStation, WebClient

Computer Policy \\ Computer Configuration \\ Administrative Templates \\ System \\ Logon

We are interested in setting

Always Wait for The Network at Computer Startup and Logon

Install it in Enabled and reboot.

Personally, I really like for these purposes WKHTML, which is raised by the long-habitual teams:

CD / OPT Wget http://downloads.sourceforge.net/project/wkhtmltopdf/02.12.1-dev/wkhtmltox-0.12.1-c22928d_linux-wheezy-amd64.tar.xz tar -xpjf WKHTMLTOX-0.12.1-C22928D_Linux- Wheezy-AMD64.Tar.xz RM WKHTMLTOX-0.12.1-C22928D_Linux-Wheezy-AMD64.tar.xz

Run the team

/OPT/WKHTMLTOX-0.12.1-C22928D/bin/wkhtmltoimage --Width 1000 --Height 1000 --Crop-W 1000 --Crop-H 1000 --Format PNG --Quality 80 http://xakep.ru/ /tmp/snap/xakep.ru/wkhtml.png.

Tulza is very convenient to use in different scripts - there are many different settings. If you suddenly do not like this Tulza for some reason, here is the list of analogues:

webScreenie;
Phantomjs;
Python-WebKit2png.

Try to put Blueman, it is in the repository:

APT-GET Install Blueman

If Blueman flatly refuses to see the adapter, in the console:

APT-Get Install Bluetooth Echo "0000" \u003e\u003e / etc / bluetooth / pin /etc/init.d/bluetooth start hcitool scan

First we set the module to work with Bluetooth, then set a password for connected devices, then start the daemon, and remains to be scanned for Bluetooth devices. After installing the module, you can steer bluetooth from the console or through the shell that you like more.

Try to use Foreign Linux - this is a dynamic binary translator and an emulator that allows you to run unmodified Linux binary packets under Windows without using drivers or modifications, thereby implementing a completely different approach than in Cygwin and other tools. On the this moment The following tools are available in Flinux:

basic utilities: Bash, Vim, Nano;
development environments: Python, GCC;
package Manager: PACMAN;
terminal Games: Vitetris, Nethack;
network Utilities: WGET, CURL, SSH;
x: XEYES, Xclock, GlxGears Environment Applications.

Personally, I use two tools for these purposes. The first is REMMINA, puts from the repository, has many different plug-ins that can be delivered:

RDP, VNC, NX, XDMCP, SSH, Telepathy

It has a simple, unloaded interface, is very easy to control. And the second is the ever-young Rdesktop, which was not heard only living in the bunker. Syntax is approximately like this:

RDESKTOP -U User -R Disk: Home \u003d Home / User -g 1280x975 -k EN-US -D Domain 192.168.0.1

Here, in addition to connecting to a remote desktop, we still draw a home folder that, it happens, it is impressed in work. Someone will say that it is inconvenient, but believe me - this is the case of habits, alias and boried scripts on hotkes.

Remmina.

As analogs I can offer the following packages:

knoda;
GNOME-DB;
Berkley DB.

Also in case you need to open the base from the network resource and make data into it or display reports on the screen plus to use VBA, look at these solutions:

MDB Tools;
Linux MDB Driver;
KEXI.

MUST Have, in my opinion, is "The Web Application Hacker's Handbook: Discovering and Exploiting Security Flaws". In addition to the necessary foundations, a web application testing methodology is described, which drops you a certain number of skills on the topic. And in general - keep links with the top hacknig: once and two. Partly they repeat, but there are differences. There is a lot of interesting things that must not only take your regiment, but also replenish the stock of knowledge.

Easily! For a warm-up and start, you can look at the BWAPP project, it is focused simply a huge number of different bugs. Take a look yourself:

SQL, HTML, IFRAME, SSI, OS COMMAND, XML, XPATH, LDAP AND SMTP INJECTIONS
Blind SQL and Blind OS Command Injection
Bash Shellshock (CGI) and Heartbleed Vulnerability (OpenSSL)
Cross-Site Scripting (XSS) and Cross-Site Tracing (XST)
Cross-Site Request Forgery (CSRF)
AJAX AND WEB SERVICES VULNERABILITIES (JSON / XML / SOAP / WSDL)
Malicious, Unrestricted File Uploads and Backdoor Files
Authentication, Authorization and Session Management Issues
ARBITRARY FILE ACCESS AND DIRECTORY TRAVERSALS
Local and Remote File Inclusions (LFI / RFI)
Configuration Issues: Man-in-The-Middle, Cross-Domain Policy Files, Information Disclosures, ...
HTTP PARAMETER POLLUTION AND HTTP Response Splitting
DENIAL-OF-SERVICE (DOS) Attacks: Slow Http and XML Entity Expansion
INSECURE DISTCC, FTP, NTP, SAMBA, SNMP, VNC, WebDav Configurations
HTML5 Clickjacking, Cross-Origin Resource Sharing (Cors) And Web Storage Issues
Unvalidated Redirects and Forwards, and Cookie Poisoning
Cookie Poisoning and Insecure Cryptographic Storage
Server Side Request Forgery (SSRF)
XML EXTERNAL ENTITY ATTACKS (XXE)
And Much Much Much more ...

On the official website of the project described what can meet there. I also strongly advise to look at, there is a whole selection of boot2root images for everyone.

To do this, you can use this syntax:

TAR -ZXVF file.tar.gz --wildcards "File / Bin" -c ./

Thus, we unzip out the file.tar.gz archive only the File / Bin folder in the current directory.

Is it possible to raise a virtual machine on the server without a GUI?

Yes, for example, you can use QEMU. QEMU refers to programs that emulate the hardware environment. Its basic functions are similar to Vmware, VirtualBox, Bochs or Virtual PC. Although some features are different. For example, two types of emulation are supported:

Full System Emulation - A full-fledged virtual machine has a "its" processor and different peripherals;
User Mode Emulation - Mode supported only in Linux, allows you to run on a native processor program compiled for another platform.

In the second version, QEMU assumes all the concerns about the translation of the instructions of the processor and the conversion of system calls. In this mode, emulation is possible not only x86, but also processors of other architectures: ARM, SPARC, PowerPC, MIPS and M68K, which is quite cool. QEMU is available in a repository for Debian.

Sudo Apt-Get Install QEMU KQQEMU-COMMON KQQEMU-SOURCE

Now we collect the KQEMU QEMU ACCELERATOR MODULE module. It allows you to perform part of the code directly on the real processor, bypassing the virtual, thereby speeding up the operation of the guest system. Thanks to him, the launch of the Virtual OS increases at times.

Sudo Module-Assistant Prepare Sudo Module-Assistant Auto-Install Kqqemu

We try to download the module:

Sudo Modprobe Kqqemu Lsmod | GREP KQQEMU KQQEMU 124196 0

To continue not to load it manually, add the KQEMU to / etc / modules string. For the launch of Samoa virtual machine sufficient team

QEMU -HDA Test-Disk -Cdrom Ubuntu-Server.iso -m 512 -Boot D -Localtime

QEMU capabilities are almost endless, and documentation contains great amount Information pages, describe a fully process and all subtleties are simply impossible. Therefore, if you are interested this toolI advise him to be sure to try and apply in my projects, since it is not as complicated, as it seems at first glance.

How to transfer Windows to SSD with installation of the same Linux while saving sections and data? At the same time, other sections of Windows must be preserved on the HDD and swap with / home.

According to the initial conditions we have one hDD 1 TB, broken into three sections (C: D: E :). You need to deliver an SSD disk and split it into three sections. After transferring should be the following:
HDD, instead of a disk with: There will be two sections: / dev / sda1 -\u003e / swap; / dev / sda2 -\u003e / home; Sections D: E: We do not touch.
SSD, / DEV / SDB1 -\u003e Win7 bootloader, which will subsequently be rewritten by GRUB; / Dev / SDB2 -\u003e C:; / dev / sdb3 -\u003e / (Linux)
First you need to make a backup of all important and critical data. If you wish, you can even remove the disk image so that you can certainly use CloneZilla to do this, which was written in the previous number] [.
Now you can proceed to the transfer of sections. For these purposes, Acronis is quite suitable for us. Disk Director.. After starting and defining two HDD and SDD discs, select Windows loader (this is a section of 100 MB per SDA) and choose to transfer TOM to SSD. We also do with the disc from:. After rebooting, our Windows should swear and not loaded, which is logical. Do not scare, insert boot disk, let it restore the right paths to the loader. The most important thing is not to go further until the system starts fine.
After the loading of Windows does not have any problems, moving on. We start to put Linux. We need to put / swap at the beginning hard disk SDA, then everything that remains from former disc With: I give under / home, I put everything else on SSD and install GRUB on it.
After rebooting, you must get the desired card planned. Two operating systems, broken on two disks. This gives a good increase in the work of both OS, but also adds some inconveniences related to the fact that the data cannot be lost and put such experiments fall on the combat vehicle. If there is an opportunity, I advise you to practice "on cats" or at least on virtuals before starting.

SSD or HDD in a laptop for daily work?

A. SSD will give a significant increase in speed in comparison with the usual HDD, plus if you use the so-called server SSDs calculated on large quantity Cycles of rewriting, you can achieve very good indicators for the hours of working on failure. Plus quiet work and less laptop weight.

How to remove grub and restore windows bootloader 7

Well, what to say, the new system is completely satisfied with me, and as in my opinion, visually looks good. Even a basket, which I don't like everything, just because of the fact that there is a slightly similar to a basket from Windows 98, no disgust causes.

But all the same, recently, I ran into the first problem on the new Windows 10. When you try to start any program, I began to pop up the error - "". But to be honest, I have a suspicion that this error appeared as a result of installing one utility that I tried literally before the appearance of this problem. So, I did not blame the new system.

But the relationship with the fact that I have a second account on my computer, I went to it to check if there was such a problem there. After booting, I launched the browser, the regular page load began, which means that here ( on this account), everything is fine. And since everything works here, it means that by creating a new account, the problem will disappear, but this version of the error solving "Interface is not supported", I did not come up, because on my profile there are a lot of various programs that are stored a lot of important Information for me. Therefore, I started looking for advice and recommendations on the Internet that could help me get rid of this problem.

Error Correction "Interface Not Supported"

And as I, I had alert that this operating system is not supported, well, I continued to search. ( For those who have Windows 10, immediately go to the second item, if you have a seven then read further).

Here link On the jump of this file. You will only need to install it and run a computer at the end.

Download the archive on this link to any folder on your computer and unpack it. Further, run on behalf of the administrator file " interfacenotsupportedfix.bat ",we are waiting for the end of the process and reboot the computer.

To do this, click on the computer with right mouse button, and select the item "".

In the window that opens, specify the name of the new account, and at the request of the password. Also, do not forget to remove the tick " Require a password change", And click" Create ".

These are the methods that seemed to me really workers. Be sure to try everything in turn and you accurately get rid of the error "". In any case, if we leave comments, and I will try to figure out and help with solving your problem.

"Interface is not supported," how to get rid of?

instructions

Step 1:



To Fix (Exe Error. No Such Interface supported.) Error You Need to Follow The Steps Bell:
Download (Exe Error. No Such Interface Supported.) Repair Tool

Step 2:
Click "Scan" button

Step 3:
Click " Fort all"And you did!

Compatibility : Windows 10, 8.1, 8, 7, Vista, XP Download Size

Usually caused by incorrectly configured system settings or irregular records in windows registry. This error can be fixed special softwarewhich registry restores and sets up system settings To restore stability

if you have error EXE.. Such an interface is not supported. then we strongly recommend that you Download (exe error. Such an interface is not supported.) Repair Tool .

This Article Contains Information That Shows You How to Fix Exe Error. No Such Interface supported. Both (Manually) and (Automatically), in Addition, this article Will Help You Troubleshoot Some Common Error Messages Related to Exe Error. No Such Interface supported. That You May Receive.

Note: This article was updated by 2020-03-16 and previously published under wiki_q210794

There will be several C + Runtime errors that mean the CMD icon and select "Run from the administrator." 2. At the top of the window, right-click the scanning of malware. Please, help! In Search Fixed: 1. Click "Start".

To someone did not resolve running the above command, you need to perform a few minutes. In the command prompt, enter for / rc: \\% g screen, with the exception of CMD fields. I tried the SFC / SCANNOW BOX, enter CMD. Close all fields that are included in the DLL files in the system.

but the error still happens. The message "FOR / RC: \\% G IN (* .dll) DO"% Systemroot% \\ System32 \\ regsvr32.exe "/ s"% g ", and the system slows down. It will take all C: \\, finding all DLL - Files and will analyze them on regsvr32.exe. I tried when I right-click from the desktop, and click "Personalization" or "Screen Resolution".

No support for such an interface

before you updated the driver and conducted aggressive cleaning. Thank you. Sometimes the only way to eliminate such damage is to reinstall Windows or restore backup. You can try to run System Restore. To restore your system.

how to fix it? I also launched an antivirus check without working, and I can't open any folders. When I started maintaining it, my sound helps us better help you.

So today I played a video game on my

My dad suggested that I take the computer to the local store, but ESET smart security, and I came up with clean. I would not want to spend money on what perhaps a slight solution. The computer sounds for me when suddenly my computer completely disconnected. Do you accelerate?

Does anyone have an idea. Looks like a hardware problem. I get an error message "No support for such an interface", although I am this PC?

How many years

Please fill out or publish your system specifications that can use any program that I tied to the starting panel. .exe no such support interface

I took steps in the manual for this windows version 7 Ultimate version 6.1. Go to our website:
New instructions - read it before the publication will still be infected.

I recently had an unpleasant virus, Win page (re-register all DLL), and it did not help. . pDF files For Zotero, the quoting control plugin for Firefox.

You can seek help to remove malware - Tech Support Forum
and follow the instructions. If you are clean, problems .exe files receive this error "Without such support for the interface" when you try to install programs. I tried to do SFC / Scannow can be associated with a grid.
offers?

I managed to get rid of it with some people in CMD, and it did not help. Any thanks !!! I'm not sure how to describe it, but it looks like a new new forum, but as a result, I stayed with this misdo error. According to Winver, I

I tried to start fixing it from the Microsoft website, but it did not fix it. I have several sites on which it does not work. Why do you need IE8?

When trying to remove an old letter using windows Explorer. File type is a message email Outlook. Any suggestions? Displaying an error 0x800004002 without supporting such an interface

Do you get this error with IE? Hi, Peter, welcome what I blocked me from the main files. Error 0x800004002 without supporting such an interface
[Email is protected]

do not have the concept of cookies from the smile window, which I can not delete. Cleaned the virus (I hope), but can not, if this is a problem, but suspected, as in AppTData / Roaming / Smilebox.

attempts to recover a viral attack (open as admin), then enter
rEGSVR32 C: \\ Windows \\ System32 \\ ActXPrxy.dll

I looked at environment variables and found an error 2. Thus, create new users. If yes, go to launch and enter CMD to seven forums.

Error no support for such a problem interface 7

When was the last time before it happened?

You installed / deleted everything you did when checking viruses? Click the link in my subscription to do it.

Good give me help and advise please

SO His Error Explorer.exe

Please fill out your system specifications. Website error: script16386: Such an interface is not supported

Currently, I am developing an interactive web card. And EDGE does not work here. One of the functions of this card is to have "print",

which captures the canvas card and adds a legend and logo. Mywindow.document.write (" ");
mywindow.document.body.appendchild (SIMG); //<- IE11 Все остальные элементы загружаются, как ожидалось.

Suddenly unable 2 Play MP4 files ... Error "Such an interface is not supported." .dll Miss

I tried these steps, but it still does not work:
First user configuration
Installation? For example, User1 can access the clips on a specific computer, I thought it was a user profile error, but it was not. Why it works on some users, but it is not on others? Do we have roaming, which can be found on the Internet?

I already tried Microsoft's fixture, delete. This is a profile of users 50. Please help, I can not reinstall the 2010 Office, but I still do not work. Thanks, but when User1 is registered on another computer, error codes appear.

The interface is not supported

Hello Roger,

You found the decision of Ashley. Since I did it, I can't get into the windows, check the computer or cloning the C disk on an advertising drive every Saturday. When I'm trying to enter, I get a "accurate disk instance for small things." I believed that the Acroniss clone made the clone restoration on the disk d.

I use ACCRONIS 2011 for a long time. No such InterCe is supported. "Any ideas like I can sort it, please. For the first time I had a reason for the problem with Explorer?

Roger any of the right hand starting screen, the program is not a problem. Such an interface is not supported.

The problem is that when I open the "Start" menu, then try these fixes, although not a specific technician, therefore the words of one seat for someone in idiot mode.

My new car has an error, perhaps after reinstalling IE from 8 to 9. Thanks Jim

Do you doubt that you installed IE9?

Please be kind to me, I'm not young, or to IE9, they can help -

http://support.microsoft.com/kb/281679.

http://social.technet.microsoft.com/...d-AB41A05D26A2.

Sincerely. , Jcgriff2.

`
Try to open music, photos, etc. I receive a message above. Explorer.exe no support for such an interface

I do not want to copy my photos and music, and I'm finished. Running Avira Antivir Personal, without any problems. Everything I need is the ability to something with this problem. Unable to access removable media.

I basically can't do malwarebytes anti-malware and SuperantISPYWARE. It is impossible to create new custom documents, images, music, games, computer ... get an error message - your friend

Now I am in desire to do everything possible to take possession of folders.

All of them scan formatting, but do not want to lose My Pictures or My Music files. Thanks

When trying to restore the system any regedit.

When you try to mount: My Explorer.exe does not have such an interface. Explorer.exe No Supports Such Interface

on those, nothing happens. Because of this, I can't open the windows using my avast! I'm doing? What you need to use, switching schedules ATI Radeon Mobility HD 5650.

If you press the "window name" explorer.exe, I noticed that update software or default or actions center. I tried to re-register Dall files through EXE, these are uppercase, and not lowercase letters that seem wrong to me. Do I need

I have 7 64bit, 4GB command line and tried the restoration of the system. Security on the Internet, update and inclusion
Errors: no support for such an interface

Current Error Thought:
the error should be contained in the registry of user accounts or in the user account profile folders. I really wanted to lose all versions that were extremely terrible, but I managed to bring it to the end. Admin Do not hesitate to move it to the right place.

I understand the viruses very well. Any control panel: "No support for such an interface"

the symptoms were very complex, the same problems arise.

I was not sure where to do this (BSOD failure, interface support "
Explorer.exe: opens in the background and idle. Service and corrections, etc.), so I just put it here.

My computer: "No such interface"
c: \\ "No. So open the folder. Any new user account does not cause any symptoms, but all new user accounts created. Any help or, CD recorder fries)

Points of interest:
the administrator account does not change and works normally. Not the last IExplorer (although I use Firefox.

I say this because the administrator's account has Even Vundo)

Now will be appreciated. I mean Microsoft

Repair is not able to do:
no Win7 CD to install correction. (Cannot create days, processes were dead, so there is no need to reboot during the correction of self-healing. Catalyst:
after infected with the AV AntiVirus 2012 virus and manually deleted it.

The system worked fine until I rebooted.
(I sleep, and not off for ... explorer.exe "No support for such an interface"

It seems that the system does not have a C ++ execution medium according to the missing file message.

Hello guys when I try to distribute the distributed SP1 package (x86) from the official Microsoft download center

Try downloading and install it:
Upload Microsoft Visual C ++ 2005 immediately after the desktop that MSVCP90.dll is missing. What the hell is happening?

Pressing the music library from the open folder on my computer, for example. Plus, whenever I launch my computer, I am reported on the start of the work given above. No such interface is supported by HelppPPP !!!

Perhaps the system check file can fix it. SOLVED: Such an interface is not supported.

Click the "Services" tab, check the "Hide access link all Microsoft services" checkbox and click "Disable All".
5. To perform a clean download on a computer to confirm, enter the password or click "Continue".
2.

Is there any third-party application that contradicts Internet Explorer performance. In the "Selective Start" section, click to Clear below. The article is intended for Windows Vista, but it is good for Windows 7. After starting the computer, check the invitation, click "Restart".
7.

Reset IE 8.
http://windows.microsoft.com/en-us/windows-vista/reset-internet-explorer-8-settings

You can also try to perform a clean download and watch Microsoft Answers !!!

"Welcome to Microsoft Answers !!! Please, help.

And repeat the attempt and see if the error occurred. Click "Start", enter msconfig in

Http://support.microsoft.com/kb/331796, running Windows Vista, follow these steps:
1.

Also, see the section on how to return your computer to normal start-up mode
The above when you register two DLL libraries using REGSVR32: ActXPrxy.dll and SHDOCVW.DLL. The first thing you can try is: "There is no such interface." Help me solve this problem. Below is a solution, whether the problem is allowed.

I click on an exclamation mark, and the words are a simpler method? OK.
6. On the General tab, click "Selective Start".
3. If your problem is solved, follow the instructions ... The interface is not supported.

new Dell, so it is XP with Direct x9, etc. ...
Or I can save them in some other way. My computer. However, I get the message "Not Supported Interface". This is because they defended him or because I have a system installed or something else.

(1) Download (exe error. Such an interface is not supported.).

(2) EXE error. Such an interface is not supported.

(3) no support for such an interface

(4) IE8 error: such an interface is not supported

(5) No support for such an interface [Error]

What does not support the interface in the crack. How to fix the EXE error

The first solution to the problem "Interface is not supported" in Windows 7

The second way to solve the problem "Interface is not supported" in Windows 7 found on the Internet

The first solution to the problem "Interface is not supported" in Windows 7

The second way to solve the problem "Interface is not supported" in Windows 7 found on the Internet

Other publications:

"Interface is not supported," how to get rid of?

Error Correction "Interface Not Supported"

Error: "Interface Not Supported" in Windows 7 (explorer.exe) »MS Windows» Blog of useful articles on the development and promotion of sites

Other publications:

Usually, when a similar error occurs, the problem turns out to be in the DLL libraries. To eliminate it, you need to re-register them. To do this, run the command line on behalf of the admin and perform there:

Is it possible to raise a virtual machine on the server without a GUI?

How to transfer Windows to SSD with installation of the same Linux while saving sections and data? At the same time, other sections of Windows must be preserved on the HDD and swap with / home.

SSD or HDD in a laptop for daily work?

Error Correction "Interface Not Supported"

Password recovery