How to cancel the autorun programs. Automatic program launch in windows

Moments happen when it is necessary to remove some programs from the autorun in the Windows 7 operating system. This is done in order to significantly reduce consumption system resources And improve the performance of the computer, while decreasing the start time of the operating system.

Few people know that some default programs are installed in automatic start after installation. Therefore, they need to turn off those that are not needed. But it is worth doing this with special attention, since the autorun is a service program, without which the system is not possible.

Turning off the autorun through the "Start"

Experienced users could familiarize themselves with him independently third-party help, and novice users need to go to the Start menu, then select "All Programs" item and go to the "Auto-loading" folder. All utilities that are in this section are started when loading the operating system. To this not happened, you should remove not particularly important applications.

Application of the MSConfig program

This application does not need to be installed because it is already installed in the operating system, so it is necessary to run it and use it. To do this, go to "Start", select "Run" and register msconfig. After that, you need to click on the label to start the program. You can also use the Win + R keys combination, enter msconfig and click OK.

Then in the program you need to find the "Auto-loading" section. To disable programs that do not have to run when Windows starts, you must remove the corresponding checkboxes. Unknown utilities are better not to touch. Then you need to click OK, after which you should restart the computer.

It is quite convenient to use this program, but it is not very functional, because it is not capable of disable all applications from automatic launch.

Disable autorun through the registry

First of all, you need to start the registry. To do this, click Win + R and in the junctioned window to register REGEDIT. After these actions, a window will appear with large quantity Folders with unknown names. To find a folder with startup programs, you need to go through this path: computer \\ HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Run

The ultimate folder contains utilities that are loaded simultaneously with operating system. Those applications that should not do this must be deleted by clicking the PCM and selecting the appropriate item.

How to disable autorun using applications?

To do this, use free utility Autoruns. At the same time, the program has a large set of functions and is able to disable all applications that are launched in several clicks. automatic mode When starting the operating system.

The official website of the developer is the English version of the program, but it's not so difficult to deal with it. You need to download the archive and unpack it. In the folder you should find the file autoruns.exe and run it. After that, the installer will ask to confirm the license, which must be done.

After installation, you must go to the Everything tab, in which the list with all applications loaded automatically is located.
To disable unnecessary utilities, you must remove the checkboxes opposite them. Under each program there is a line in which you can see its description and location in the system. The Logon section contains programs that have been deleted in other ways.

When you disconnect any applications, you need to know their purpose so as not to apply more damage to the computer.

Hello, blog readers! I repeatedly wrote users who now learn how to disable the autorun programs in Windows 7. This procedure is also suitable for other versions, such as: Windows XP and Windows 8.

Why remove programs from autoloading?The fact is that each application placed in autoload is automatically started in immediately after windows downloads. As a result, the operating system allocates each program required volume. random access memory. Thereby decreases the available amount for other applications. And from this it follows that with a large number of programs that are in autoload, the performance of the computer may noticeably decrease.

Therefore, you should not add all programs to autoload that will seem necessary to you. They should be the necessary minimum there. In addition, from time to time to make an audit of applications that are in the tray. And that's why.

Periodically, the procedure for cleaning the autoload is worth it even if you have not added to it consciously new items. The fact is that when installing, many programs unobtrusively offer add them to autorun. And considering the fact that most programs are usually set by the method of sequential pressing the "Next button", not even detail in the details of the installation, they are added to the default to the autoload. Therefore, I try to add screenshots in each of my article, in which I show what you need to press.

In addition, quite often when installing programs, they are asked to resolve the possibility automatic search and installing updates and additions. Such modules also fall into autorun.

Tip: If you need a one-time to use the program, then it makes no sense to leave the checkboxes that say about updating or adding a program to autorun.

Naturally, we are not satisfied with a bunch of programs that will be loaded with Windows. Therefore, we consider ways to remove programs from autorun.

An important nuance. Deleting a program from the autorun menu does not lead to the removal of the program itself. It remains installed and is always ready to work. You can run the program, as usual through the Start menu, the ProgramFiles folder or the desktop label.

The autoload is used for more comfortable work at the computer. After turning on the computer, you do not need to think: no matter how to forget to turn on the antivirus, Java, Magent, Skype, etc. Also additional information You can read about autoload in: ""

Just a way but not for all programs

If you are afraid to pick up in the settings, but still want to understand how to disable the autorun programs, then this method is for you. One way to remove programs from autorun, and therefore from the system tray (usually), provides Windows itself. To do this, it is enough to do the following chain of operations:

"Start" - "All Programs" - "Autoload". We will see a list of programs that are loaded automatically. Now call the menu with the right mouse button, find the item "Delete" and activate it.

Such a statewise way is good, but not ideal. The fact is that many programs that are loaded in automatic mode are not displayed in the "Auto-loading" menu.

Standard tools of Windows

To disable the program from autoloading, you can use the regular windows tools.

To do this, we need to click "Start" - "execute" or you can use the hot keys "Win" + "R". Now enter "msconfig" and press "ENTER".

In the opened window, go to the "Auto-loading" tab.

To remove the program from autoload, you need to remove the tick, which is located on the left of the autoload element. After that click "OK".

After that, a message appears in which you press "out without rebooting". If you want to check if the program is right not to boot together with Windows, you can click on the "Restart" button.

Remove the programs from the CCleaner startup program

How to remove the program from the startup software? To the aid, we will come small, but very comfortable cCleaner programYou can download it directly on my blog. The CCleaner application, despite its compactness, is really very comfortable. This is one of the programs that I can safely recommend to install on a computer or use the version.

After installing the CCleaaner and its launch, it is enough just to go to the "Service" section, and then in the subsection "Autoload".

Then choose the program that we want to remove from the autorun, press "Turn off", confirm its removal and click "OK".

Below in the screenshot, we see that the MailUpdater application starts when Windows starts.

But after I clicked off the "Turn off" button, we see the "Inclusive" column: "No." So the program will not boot when Windows starts.

I would like to note once again that the removal of a program from the system tray or autoload does not lead to its removal. It still remains installed and operable in the system.

As you can see, solving the issue - how to disable the autorun programmolds Windows 7 is not so complicated as it may seem at first glance.

And today everything.

How to disconnect the autoload - this question is set by very many users, including those whose PC is "seven". Often it occurs due to the reduced computer performance. This happens for one reason - a large number installed programs Windows that are turned on immediately after starting the entire system. As a result, the computer begins to slow down, and the launch of Windows can last a few minutes and even more. To avoid this problem, you need to understand how to disable the autorun programs in Windows 7.

Such situations arise not only in ordinary users, but also experienced. For greater performance, to limit resource consumption and speed up the work of "iron", you need to disable unnecessary programs in the autorun menu. The bottom line is that almost all programs are standardly included after switching on. You can usually find a special "window", where there is a request from a user about it, but it is so small or in the distant corner that most people simply do not notice it. Setting up autorun or autoloading programs is a matter of several minutes, but most people simply do not know how to perform them.

When the programs are disconnected, you need to be very careful and do not try to turn off everything. Some utilities are directly related to the work of Windows 7, you can apply an irreparable damage system and make only worse.

Method First: Deleting programs from the autorun folder

How to delete a program from Windows 7 autorun. This is the easiest and most common way that is familiar with almost every user. For its implementation, you need to go to the menu " Start", Then in all programs and click on the folder" ".

It is this folder that is the starting point on program on your computer. All that is located in it is started when the system is turned on. How to limit their auto inclusion. The easiest I. rough method - Just remove all utilities that are located in the "folder". Almost any user at least once did it. But the problem is that I want to limit their launch, but do not delete completely. But you will cease to torment the autorun Skype or other similar programs.

Method Second: Using the standard utility MSCONFIG

This method for those who need installed utilities, and it cannot just take them and remove. But the disconnection still remains in your tasks, in this case you need to use standard Program. It is standard built into Windows 7 and is on each computer without exception, you do not need to install anything or download from the Internet.

To start the utility, you need to open the menu " Start"And click on the search string, you drive the following name.

Sometimes the search may show that it is not on your PC. Then we are looking for it at the address on the screenshot and launch a double click. Next opens the window, all the settings of which are in the upper corner. We need to click on the "" tab and remove all the ticks opposite unnecessary programs. Thus, they will stop automatically start when the computer is turned on and bring you inconvenience.

If you do not know, for which one or another utility is responsible, it is better not to change anything, turn off only those with which you personally familiar. Click OK after excluded all unnecessary programs from the list. You will be offered to restart the computer. This is to solve you, the process will not affect our settings anyway. The main advantage of this utility consists in its simplicity, and a lack of small functionality. It does not provide an opportunity to disable everything. existing programs. And this is a problem for some users, therefore it is worth considering other options.

Method Three: Disable Manual Programs

To perform this process, we need to open the registry editor. To do this, press the Win + R keys combination or separately go to the menu " Start" It is necessary to type the word in the search. regedit.».

The registry editor appears before us, it looks scary, but actually nothing like that. Of course, it is better not to change anything in it so that no changes in the system do not happen. But, if you know what you are doing, you should not be afraid. In our case, you need to find the following address " Computer \\ HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run».

Folder " RUN."What we strive for. If you run it, a large number of new folders unfold. Here is a list of all files that run when the system is turned on. Select any of them by clicking the right mouse button and delete. This is a fairly simple, but also not an effective method that some complications can be made or future failures in Windows 7. However, such a procedure will be able to carry out each, it is its ease that makes this option one of the best.

Fourth Method: Disable the program using the downloaded utilities

This is the most popular method. You just need to install a program that can help you disable any software on your PC. The advantage is that for this you will need to just go to the desired tab and remove the checkboxes, it's all. But first you need to choose exactly the program that can perform your functions by 100%. In modern conditions, this is a difficult task, because there are thousands of similar utilities on the Internet, most of them are low-quality.

Specialists are offered to use the program Autoruns.Her main plus is that it is completely free. At the same time, the utility is very powerful, has a large functionality. Using it, you can disable an absolutely any program in just a few clicks. This will allow advanced users to turn off the entire Windows Software, which they simply do not need.

Before using any programs working with the registry, even the most proven and recommended, always.

Download the program from the official site, the only minus - englishAlthough you can find and Russified version. Control Panel Autoruns.very simple, so everyone will be able to figure it out. Unpack the archive and click on autoruns.exe. The program does not require installation and start immediately.

« Everything" or " Everything."- The desired tab on which you can see the lists of absolutely all programs, services, drivers, and so on, which are included during system startup. The remaining tabs allow you to see the same thing, but in an ordered and filtered form. You can disable autoload programs from any tab.

It is possible to click on any of the records, you can view the version of the software, its size and on the PC at the bottom of the window.

Of interest is also a double click of the mouse pointer on the entry line. This will open appropriate system program (utility) Windows that is responsible for launching the file of the corresponding record. For example, clicking on the SunjavaupDatesched line you will see such a newly opened window:

To disable the autorun of a specific program, you just need to remove the tick on the contrary.

As you can see Autoruns.very easy to use and also does not require installation. It remains only to turn off the really not necessary software. And do not forget to make the recovery points before performing significant changes.

So, we hope that you have received an exhaustive answer to the question, how to disable the autorun programs in Windows 7, and now you can significantly speed up your PC.

Video on the topic

If after turning on the computer you have to wait long until the operating system is finally loaded - do not put up with it! Some of my friends who bought a powerful laptop literally two months ago, believed that this is normal - wait five minutes before you start working with him. Accidentally seeing it, I immediately opened list of autoloads And discovered a large number of applications that started with the system.

The fact is that many programs after installation are independently prescribed in bus loadAnd then each time you turn on the computer together with the operating system. This, of course, does not affect the upper side of the Windows boot time. To increase the speed of the system loading exclude extra autorun applications.

There are several ways to remove from autoloading unnecessary programs:

The first method is. It stores shortcuts to programs that are started after successful user registration in the system. Labels in this folder can be added by programs when they are installed or by the user independently.

There are two autoload folders:

General - For all users of this PC. Located in the catalog Documents and Settings \\ All Users \\ Main menu \\ Programs \\ Busloads. Programs from this catalog will be launched for all windows usershow much they would not be.

Individual - for the current user who has entered the system under its accounting. Stored in the catalog Documents and Settings \\ Username \\ Main menu \\ Programs \\ Autoload. Programs from this folder will run for the current user.

So, if you do not want programs from these folders to run when Windows starts, simply delete their shortcuts from folder data. You can also delete these shortcuts if you go to "Start" - "All Programs" - "Startup".

Second way - using the built-in utility system setup. To call it, go to "Start" - "Run" - type msconfig and click "OK". In the window that appears, go to the "Startup" tab. To remove unnecessary programs from autoload - just remove the ticks opposite them and click "OK", then restart the computer.
If by name in the first column you can not understand which program is in the startup, look at the "Team" column. Here is the path to the executable file that will help you determine the folder and, accordingly, the program name.

Third way - in the registry editor. Go to "Start" - "Run" - type regedit. and click "OK". The autoload information is contained in two registry branches:
HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Run - responsible for autoloading programs of all users of the system.
HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run - responsible for autoloading the programs of the current user system.

To remove the program from autoload - just delete the appropriate key (right-click on the key - select context menu Item "Delete"):
Fourth way – autoload Management With third-party programs . There are many utilities that allow you to disconnect the autorun unnecessary applications. Among them and repeatedly mentioned on the blog of the program and.

IN CCleaner To control the auto start, it is not necessary to select the "Service" tab - "Auto-loading" - find an application that is not necessary to load with the system - select it and click "Turn off":
In a programme Starter. To do this, go to the "Startup" tab - Find on the right list the necessary program And remove the checkbox from it. In the appeared window, click "Yes."
Another program for managing the Windows startup, about which I must tell you, called Autoruns.. This is a small, but very powerful utility, with which you can see (and if necessary, disable) All programs, services and drivers started with the operating system. Autoruns may be useful if the virus settled in the autoloader. In more detail how to work with this program I will tell

Autostart - the thing is very useful, especially if we are talking about applications that must be open constantly. For example, Skype or antivirus. But often sit there extra programs: They only interfere with working and load the system.

For example, torrent client UTorrent. Of course, if you constantly download something, then it may, and not bad, but in most cases it is not needed. So why update the system and spend the Internet traffic?!

There are several ways to disable autorun. I will tell about each of them, because it is often not so easy to correct the program. Let's start with the simplest.

Method number 1.

Disable autorun in the program itself

Often, autoload can be disabled directly in the application itself. To do this, open the program, go to its settings and remove the checkbox in the right place. I'll show you on the example of uTorrent.

one . At the right upper part of the window, click the "Settings" button and select the "Program Settings" item in the list.

2. In the window that opens (in the "General" section), we remove the box opposite the "Run UTorrent" item and "Run a getter", click "Apply" and OK.

As you can see, everything is very simple. But, unfortunately, it works not always. In some applications, this setting can be deeply damaged or absent.

Method number 2.

Clean the "Startup" folder

In general, in Windows, and in any version (XP, 7, 8, 10) there is a special folder where programs are labels that are loaded with the system. It is located in a start, in "all programs" and is called "autoload".

Found a hateful application in it - remove without thinking. It is done as usual: right-click - delete.

If you do not have this folder, open it through the search. To do this, type Shell: Startup in the search bar and open the folder found. Delete unnecessary applications and then open the same way and clean the Shell folder: Common Startup

In the theory, it is, of course, but in practice there is only part of the programs that are in autorun. And it's not a fact that among them you will find the one from which you want to get rid of.

Method number 3.

Editing system configuration

One of the most reliable ways to remove the program from the autorun. It works almost always.

one . We open the start, enter msconfig in the search window and select the file found.

We remove the checkboxes from unnecessary programs, then click "Apply" and OK.

In addition to the usual software, the service programs also fall into this list, to turn off the download of which is extremely not recommended. Therefore, it is worth removing the birds only if you are exactly sure that this is "that" (unnecessary) program.

Usually, after that, a small window appears, where Windows offers to restart the system. Do it optional. In any case, the next time the computer is turned on to force.

Method number 4.

Remove the startup in CCleaner

CCleaner is such a programmind that helps by the usual user Clean the system from every junk (delete garbage, clean the registry and more). Including through it you can configure autorun.

Often, this application is already installed on the computer and is in the start - all programs - CCleaner folder. But if it is not, and you would like to keep the system clean and order, then you can download this utility for free and install here.

one . We launch the program, select the "Service" (Tools) item, go to "Startup). The Windows tab should be opened here.

Programs that are in autorun mode will be highlighted in a rich color and opposite them in the Enabled (Enabled) column will be written yes or yes.

2. We click on the program that we want to remove from the startup, and click on the button "Turn off" (disable) to the right above.

3. We reboot the computer to change the changes to take effect.

Method number 5.

Turn off the autorun through the registry

The registry is the place where all settings are located. windows systems. It is necessary to work in it neatly, because if you do something "not that", you can complicate my life.

Particularly talented, for example, it is possible to completely remove the system from standing, after which the computer simply refuses to work. So if you are not sure about yourself, it is better not to risk: use the ways that I wrote above.

one . Open registry editor. You can do this through the search in the "start" by typing the word regedit there

2. Open folders in the next sequence (on the left side): HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run

3. C. right side There will be commands that are launched certain programs. Here you should remove them from here.

And check the neighboring Runonce folder. Full path to it: HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Runonce. Here, too, there may be commands that run all sorts of applications. We delete them in the same way.

And you can also check and, if you need, clean these two folders:

• HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Run
• HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Runonce

What programs to remove from autorun, and which better leave

For quick download and work Windows Autostask It is advisable to make it possible to maximize extra. However, it is not necessary to zealous, because it can lead to serious problems, especially if the service applications hurt.

Programs such as iTunes, UTorrent, Mail.Ru, Yandex can be easily removed. Usually they are specifically added to the autoload and do nothing useful.

But everything that has in its title such words like Intel, NVIDIA, Microsoft better leave. And, of course, do not touch the antivirus - it should work constantly from the moment the computer is turned on and before it is turned off.

With messenkers, the situation is ambiguous. The system loading speed is definitely suffering, but manual start requires additional time. And sometimes you can forget to launch any Skype and eventually skip an important call or a message. So decide for yourself.

In general, if you doubt, you can print the name of the program in the search engine Yandex or Google and find out what it does. Most likely, it will be written there, you can remove it without consequences from autorun or not.