entranceHow to sing karaoke on a laptop with a microphone. How to connect a microphone to a laptop for karaoke or ordinary
So, today we will talk to you on how to connect a microphone to a laptop for karaoke. Make it can be quite quick and easy. The main thing is to know what and how to do. After all, it may turn out that something will come out of control. As a result, the device will refuse to work. Not the best way out. So let's see how to connect a microphone to a laptop: for karaoke, "skype" or any other purposes.
Right choice
The first thing that we have to start are to choose a device for recording sound. The thing is that it is extremely important. Especially if you plan to sing or conduct high-quality records from the microphone.
If you plan to use a sound recording device as an assistant karaoke just two times, it makes no sense to buy expensive options. For this purpose it is quite suitable for something inexpensive. Among other things, you can even use the webcam with the built-in microphone (for a couple of times). Or you can buy yourself headphones with a similar mounted device.
Otherwise, you will have to fork out for good equipment. In principle, the average sound recording device will cost you about 1000-1500 rubles. Now that you have decided on what option to purchase, let's try to figure out how to connect a microphone to a laptop for karaoke.
Not always need
But before this it is worth noting another rather important fact. In almost all laptops and netbooks by default there is a built-in microphone. It is usually quite powerful.
If you plan to sing a couple of times, and then use the sound recording device when conversations in Skype or to record "Letplyev", then you can do the inner headset. With her do not have to break your head, think how it connects, and so on. True, sometimes you can hear interference. If you do not know where the microphone is located in a laptop, then carefully look at the front panel. Usually it is built there this device. All this is because it is in this position that the sound is best recorded.
If you do not want to use the built-in microphone, then, of course, you will have to buy an additional device and think how to make it work. Sometimes small problems may arise with this. However, let's try to figure out what.
We are looking for connector
So, the first thing we can encounter is the problem of finding a special jack for connecting the headset. As a rule, in the new models there is no question - everything is extremely clear. Nevertheless, snorkeling stones can sometimes appear.
Some users think: where to connect a microphone to a laptop? Usually for this purpose there is a separate connector - 3.5 mm. You can detect it or on the rear panel, or from the right / left side of your laptop. In other words, if you have already connected, for example, headphones, then look around the connector for the sound recording device. Near him will be drawn a small microphone.
It is enough just to stick there with your headset and wait a bit (if you have Windows 7 and above) - all necessary componentsAnd you can safely enjoy this equipment. But not always everything is so radiant and simple. Let's see how to connect a microphone through a laptop if you did not work out to find the desired connector.
Adapter
True, before this it is worth noting another fact. All microphones are divided into two types. The first is 3.5 mm. So to speak, standard. With such a device there should be no problems.
Otherwise, the situation is in the event that you bought a second type of microphones - 6.3 mm. It does not fit into the standard hole. But it does not mean at all that the headset can be thrown away. It is enough to go to the nearest store technology and buy a special adapter. With him the problem will leave you forever. It will only be found to find the desired connection location - and the case is done.
If there is no connector
Well, if you think how to connect a microphone to a laptop for karaoke due to the fact that you still have not found the connector you need - do not be upset. Now some manufacturers prefer to combine and combine spaces for connecting headphones and sound recording devices.
In other words, if you can't find where to connect the microphone, try to connect it instead, for example, columns. Quite often, users may notice that it is after that the equipment begins to function regularly. So - dare.
In cases where you find that the connectors for the microphone and headphones are combined, it is better to leave the idea of \u200b\u200ba separate "micro". Take advantage of the so-called gaming headset. Just for such equipment and combine the connectors - so as not to burn the garden from numerous wires.
In general, now we know that you can connect the microphone to the laptop and through the headphone socket. Let's see what other problems can meet on our path.
Initialization
Well, we almost achieved a positive result. We already know how to connect a microphone to a laptop for karaoke or any other purpose. It is enough just to stick it into the desired nest. But on this our problems do not end. As a rule, quite often, users face that after connecting the device they absolutely do not work, that is, the sound is not written.
The point is that for the correct functioning of any device on the computer, it is necessary to undergo some initialization. So to speak, installing drivers. If you are the happy owner of Windows 7, then you can not worry: operating system trying to find all the necessary additional programs With the Internet. Otherwise, the laptop simply will not see the device. As a result, the recording of the sound will be impossible.
What if the search drivers did not start automatically? To begin with, look carefully a complete set of device. The box should have a disc with the required content. If it is not, you will have to search for drivers in the World Wide Web. As a rule, it is done on the official website of the manufacturer. There will have to find your microphone model, then choose your operating system and download drivers. Next - install them as an ordinary program, and enjoy the results obtained.
Failures and problems
So we figured out how to connect external microphone To laptop. As you can see, this is not so difficult, as it may seem at first glance. However, sometimes the user may encounter such a situation when, for example, after attaching a sound recording device, it refuses to work third-party applications and programs. For example, turns off Skype. In this case, you will have to somehow correct the situation. Let's see what can be done.
The first option is to reinstall the drivers. Maybe during the initial initialization of the device there were some failed. As a result, the computer conflicts with a connected microphone.
The second way to fix the situation is to try to connect other equipment for recording sound. It is best to use even a headset with headphones. So do not be scared - everything can be fixed.
If nothing helped - check your operating system for viruses, as well as fix system failures. In extreme cases, roll back, and then reinstall the driver for the microphone.
Conclusion
Here is our conversation and approached the end. Now we know how to connect any external microphone to a laptop or computer. In addition, we learned to deal with you possible problemswhich can only arise.
If you doubt that you really need a headset for karaoke, you can try to use the game headphones - the microphone is already built into them. It is no worse than what is used for singing. Make your choice, find the connector, install the drivers and use your hardware!
With the distribution of the Internet, many users appreciated its advantages in the field of communication with people who live in the distance in the distance, along the whole country or even the world. Email, ICQ, Skype - Comfortable communications. And if the first two support mostly text communication mode, then with the support of Internet telephony, it is allowed to apply a voice or even video communication, but in order to have your interlocutor heard you, you need a microphone. If you have a karaoke-microphone, allowed to apply it.
You will need
- - Adapter "Jack on minijack".
Instruction
1. Let's start with the fact that all modern laptops and netbooks have a built-in microphone, it is necessary only to activate it in the system settings. If he is broken, or in front of you are tasks for which an external microphone is needed, follow further instructions.
2. All laptops have an entrance for headphones and a microphone, for saving space, they are often combined in one nest, and switching is done mechanically, depending on the connected device. Laying a round hole on your laptop, next to which the microphone icon or headphones and microphone are drawn through the line. This connector is a 3.5 mm ordinary mini-jack socket and is located on the side or on the back of the laptop housing panel.
3. The typical karaoke-microphone has a jack output plug, but in the difference from the laptop entrance, its size is not 3.5 mm, but 6.3 mm. It is obviously more hot, and without additional accessories it will not be possible to connect. In order to combine the devices, you will need an adapter with Jack to mini Jack. It is a plastic or metal cylinder, on one side of which there is a hole under the Jack 6.3 mm, and the other side ends with a mini-jack plug 3.5 mm. Similar adapters are sold in radio components stores, audio equipment stores and some computer stores.
4. Later receiving an adapter, allowed to proceed to connect the microphone. Insert the microphone plug into the adapter's socket, the resulting bundle is connected to the laptop microphone connector. If your computer installed operating windows system 7, later the connection it will notify you about connecting the device. Windows XP, when connected, does not output any notifications.
5. Later the microphone and laptop connects must be verified that microphone input energetic. Enter the system mixer, double-clicking on the volume icon next to the clock. In the microphone field, check if it is worth the checkbox in the "OFF" item. If it is worth, remove and set the volume control to the desired tier. Also check the switch on the microphone itself, if necessary, translate it to the "ON" location.
Despite the fact that today the Internet is incorrecting more and more important with the sphere of amateur, it remains a comfortable and strong communications tool, which allows you to connect people in a wide variety of planet points. Skype and similar programs are not only absolutely safely replaced by intercity telephone communicationBut also allowed to conduct video conferencing - only access to the network is necessary. And in order to use these benefits of civilization, the computer needs to be trained to talk and see, that is, to connect a microphone and webcam to it.
You will need
- a computer;
- microphone;
- sound card.
Instruction
1. To connect, we need to make sure the performance sound cardinstalled on the computer and the corresponding microphone socket. Sound card can be as built into motherboardand installed in a separate slot. We are looking for on the back system Block Three multicolored entry under Jack type connector.
2. As usual, installing special drivers for the microphone is not required. Later connecting the microphone to the corresponding connector on sound card Go to the panel windows management In the properties of the universal mixer of the system volume.
3. If we have Windows XP, select "additional devices" and in the list that appears we put a tick on the contrary of the device "Microphone". IN Windows Vista. For parameter settings, select "Recording Devices". If the probabilities of the sound card are allowed, the "Strengthening" option will appear in the settings, by means of which it is permitted to compensate, say, a large distance to the microphone.
4. When you positive and connect the microphone, we immediately hear a personal voice in the computer columns. If desired, it is allowed to record special programs to work with sound. We safely connected the microphone to the computer. Now allowed to use voice communications, Internet calls and other amenities, which today offers a global network.
Video on the topic
Note!
If the microphone is not pre-prepared for connecting to a computer and has a non-standard input for a computer, you will have to purchase a mixer.
Favorite fun of many - karaoke - easily incredible without excellent microphone . It is he who shall transmit all the beauty with the speakers of the speakers (if available) vocalist's voice.
Instruction
1. Determine the location of the audio inputs on your home receiver. Most receivers have inputs on the front and rear. Traditionally, 1/4 inch or 1/8 stereo inch (headphone socket). If you have it, use this nest. On the contrary, determine the location of the easiest RCA entry.
2. Identify the plug on your microphone. Most microphones have an inches of 1/8, similar to what you see on headphones.
3. Count the strip on the plug. A plug with two black stripes - stereo (left and right channels). Three black stripes denote mono (one channel).
4. Determine the demand of the adapter. If plug microphone It has two stripes and the same size as a karaoke receiver socket, you do not need any adapters. Turn on the microphone easily in the audio inputs of the karaoke receiver. The "TIPS" segment below contains a layout of universal adapter combinations.
5. Attach the input channel on your receiver. Usually, the front nest for headphones is signed by "AUX". When you hear the sound in the Karaoke sound columns, then you have discovered the faithful channel.
Video on the topic
New laptops on comparison with dilapidated computers, in addition to more strong technical poles, there is one essential superiority - built-in microphone . Previously, it was necessary to acquire it separately. He could be damaged, lost, took an excess place, etc. All this in the past. But it happens that the built-in microphone Not included by default. With this snag easily allowed to cope.
Instruction
1. Check if your laptop has built-in microphone . How closer it was said before, modern laptops are produced with built-in microphone Ami, No. this check It will not be too much. Suddenly you have some kind of special model. Browse the documents to your laptop. It should not be mentioned. Other option: If your laptop has a webcam, then the built-in microphone It should be true. You can also see its presence through the Device Manager.
2. Go to the Start button menu. Select "Control Panel". In the window that appears, select the "Sound" section. A window will appear. In it, select the "Record" tab in order to include the built-in microphone . If it is present on your personal Computer, It will be displayed in the list of devices. Press the "Properties" button. In the window that appears, it should be indicated, whether the built-in microphone .
3. Check the audio transmission tier microphone but. It is permissible that it is energetic and works, but configured to a dirty low broadcast. Increase the susceptibility of the device. Go to "Control Panel", detect the "Sound" icon and double-click on it with the left mouse button.
4. Discover microphone In the list of devices. Click on it right mouse button. Will appear context menu. Select "Properties". Determine the items "allow applications to apply the device in monopoly mode" and "provide the priority of monopoly applications". In order to connect the built-in microphone Install the highest sampling rate and bit. Apply metamorphosis.
5. Test microphone . If you can hear you, it means that you all configured correctly. If not, then try more to change the settings in the "Improvement" tab, which you can also detect in properties microphone but. If it did not help, then, rather, everyone is in the factory malfunction. Describe the task and use the warranty service in the service center.
Connecting a mixer to a laptop - an occupation is not primitive. It is one thing - to connect the wire to two connectors, the other - prefer the appropriate sound card, with which you will definitely come across if you will then make music.
You will need
- - A set of wires for connecting a mixer to a laptop, on one side of which should be the plug "Jack".
Instruction
1. Make sure that your laptop is installed the necessary drivers on a sound card. If you are needed, refresh them in order to work correctly, from the fact that in another case, tasks may appear with the mixing mixer. Discover the audio output connectors on the laptop, they are usually notified by the pictogram with the image of headphones.
2. Take the connection wire with the Jack plug and connect it to its end to the audio output of the laptop sound card, and other to the mixture. It is more classical to apply a cable version where the connection occurs with 2 wires combined into one "Jack" from the other end.
3. If you have a wire having a plug "Jack" on one side, and with another - "tulips", connect the 1st to the connector on the video card, and the second to the corresponding audio input ports on the mixer. Be careful, follow the color scheme for connecting wires. You can also apply special adapters that can buy in the stores of radio engineers of your city.
4. Purchase a special external audio card for a laptop if you want to achieve better sound When using a mixer console. Check out their assortment on specialized sites and review user reviews that have bought one or another model.
Note!
Remember that from standard sound cards, exclusively from those that are built into the motherboard (many laptops have only such audio adapters), you will not achieve excellent sound. You can read information about professional sound cards for further links: http://www.stereohead.ru/index.php?name\u003dpages&op\u003dcat&id\u003d10, http://www.computerra.ru/terralab/multimedia/357747/ http://www.n-audio.com/news/new7.php.
Helpful advice
Purchase highly professional sound cards.
Tip 6: How to activate a microphone in the headphones with a microphone
Telephone microphone The headset (TMG) looks like ordinary headphones, but has a side moving element, at the end of which the microphone is placed. It connects to the sound card of the computer with two cables.
Instruction
1. Check if the telephone and microphone headset is connected to a computer. On the sound card, the microphone socket has a pink color, and for headphones - green. The headset has a microphone plug can be pink or red, and the headphone plug is black, green or white. Occasionally, they do not vary at all, but they have stylized designations of the microphone and headphones. Finally, if they do not have any designations at all, it is impossible to distinguish them implicitly: the microphone plug is medium and universal contacts are executed as a whole electrically combined with each other (the latter is allowed to determine using an ohmmeter - the resistance must be close to zero). Do not allow the microphone plug into any of the card's output jacks - this will cause a short circuit of the right channel and makes the risk of failure of the amplifier.
2. Attaching the headset positively, turn on the computer, wait for the operating system to load, put on the headphones and say something into the microphone. If you hear a personal voice, the connection is allowed to be considered completed.
3. In case the headphones work, and the microphone is not, run the program, allowing the ratio between the tiers of signals coming from different sources. In Windows, it is called, depending on the version, "volume" or "volume control" and is in the section "Typical" menu - "Having". In Linux, it is called "KMIX", "mixer", "sound mixer" or similar, but is located in most distributions in the Multimedia menu section.
4. Discover an imaginary regulator in the program that allows you to configure a tier signal coming from the microphone. If there is no such regulator, enter the program setup mode (the input method in this mode depends on the OS) and turn on the display of this controller. Next to it has a check mark field, which in some versions of the program includes a microphone, and in other - turns off. Make the microphone input on, later, set the slider the desired tier signal from it. Do not make it too huge, opposite will arise. Later, check again whether the microphone works.
5. If there is no Audacity program on the computer or similar, allowing you to record sound files, install it. Record your personal voice, and then listen to the record. The sound must be good, approximately without distortion.
Video on the topic
Video on the topic
With the distribution of the Internet, many users appreciated its advantages in the field of communications with people who live very far away in all the country or even the world. Email, ICQ, Skype - Convenient Tools. And if the first two support mostly text communication mode, then with the help of Internet telephony, you can use voice or even video communication, but in order for your interlocutor to hear you, a microphone is needed. If you have a karaoke-microphone, you can use it.
You will need
- - Adapter "Jack on minijack".
Instruction
You will need
- a computer;
microphone;
sound card.
Instruction
- How to connect a microphone to a computer
- how to connect iPhone headphones to computer
The modern laptop is equipped with a built-in microphone. With it you can freely communicate in social networks, video cards, write audio recordings. Sometimes it happens that the microphone broke or the poor quality of the recording. How to connect a microphone to a laptop for karaoke or ordinary: answer!
The modern laptop is equipped with a built-in microphone. With it, it is possible to communicate freely in social networks, video cards, record audio recordings. Sometimes it happens that the microphone broke or the poor quality of the recording.
How to turn on the microphone on the laptop
If you do not work the recorder, you do not need to rush and run to the store for a new one. Perhaps the equipment is simply disabled, it is necessary to check it in the settings. To do this, right-click on the notification area and start the recording devices. Lay the microphone in the entry tab and start the properties.
In the column "Application devices" make sure that the equipment is used.
In the "Levels" tab, set the maximum signal reception value. Then save all settings and try to test the device. If the microphone is not in the list of devices, then you need to install new drivers for the sound card and the built-in camera. If this does not help or you do not like the quality of the recording of standard equipment, then you need to install an external device.
How to connect a microphone to a laptop
Regardlessly, what model of the recording device you purchased if it has a standard output of 3.5 Jack, there should be no problems if you can use adapters. Usually on the laptop there is a separate connector for the device, it can be green or pink, if there is a way out, it is enough to insert the plug.
If the microphone does not work, then try to enable it as described in the instructions above. Also recheck the sound card driver. In some laptop models there is only one input, which is also intended for headphones, and for the microphone. In this case, to connect an external recording device, a special adapter is required or a headset.
Sometimes the built-in sound card can work badly or easily fail. There is an output, you can connect an external audio card that connects to a USB connector. It is worth noting that the more expensive the equipment will be, the better the sound will be recorded.
Usually, the drivers are embedded in an external sound card that themselves are installed when connected to a laptop. There are two connections on the external equipment, one for headphones, the second for the microphone. Also, to record sound, you can use the headset for which the external sound card and adapter do not need.
http://nastroyvse.ru/devices/laptop/podklyuchenie-mikrofona-k-noutbuku.htmlA few more dozen years ago, with the help of which it was possible to successfully support the relationship between relatives and friends, it was very small. The most common was considered long-distance phone callswhose relationship has provided special switching stations, as well as postal correspondence.
Nobody to call such means is successful at this time, because it came to replace him email, ICQ, Skype, allowing you to keep not only correspondence, but also to carry out voice communication and even video call.
Properly connected microphone is able to make communication with the interlocutor more comfortable
But that such opportunities are feasible, it is important to have technical means with the necessary parameters. In particular, many PC users seek to buy headphones, microphone, dynamics. It is important to clearly understand how to connect a microphone to a laptop to prevent the occurrence of errors.
Connecting internal devices
It should be noted that modern users prefer to acquire more laptops accompanied by compactness and high practicality. But, nevertheless, there is also a category of people who are at their disposal, desktop computers. These two varieties technical means Have some differences associated with connecting peripheral devices. In stationary PCs on the rear wall of the system unit there are several connectors, in which the headphones, microphone, as well as speakers are inserted separately. In laptops, things are somewhat different, so it is so important to know how to connect a microphone to a laptop.
Internal devices and their connection
Modern laptops are equipped with already built-in speakers and microphones, so if necessary, you can completely dispense with these devices.
However, occasionally happens that the user is trying to listen to the audio file or participate in voice communication, but all attempts are unsuccessful. Options for explaining this situation may be two. The first is that the laptop is not activated, these are simply turned off. In the second case internal devices could get out of building, then you have to contact service center Or connect additional acquired headphones, microphone and speakers.
If the devices are intact, and the problem is the wrong parameters set on the PC, you should examine the information how to connect the headphones with a microphone to a laptop, after which it is practically implemented by all prescribed recommendations.
To change the settings settings, go to the "Control Panel", among the list of the presented computer parameters, you should find a string associated with sound. It should click on it. After that, the "Sound" dialog box with multiple tabs will appear on the screen, go to the "Record" tab. It will displays all previously installed devices, including the microphone.
Very rarely there may be no microphone in the list. If the user is confident in its presence, it follows the "Record" open dialog box of the open dialog box and select the ability to view disabled and disconnected devices.
Now it remains to click on the device with the right mouse button, calling the context menu, then select "Enable". The power of the speakers and the microphone also depends on the sound card, which in some cases allow you to enhance the quality of sound.
If the user has been successfully made to all settings, the laptop will be able to perform a number of functions that allow voice communication, otherwise you will have to get a remote headset.
Connecting external devices
Headphones, microphone, as well as speakers best purchase in a specialized store, sharing with a consultant in the store with their future intentions. Thus, the consultant will be able to choose inexpensive headset options, or a karaoke microphone to those who do not spend the day without a song.
After the successful acquisition of the headset comes the moment when it is important to know how to connect a dynamic microphone to a laptop.
Connecting karaoke microphone
Connect headphones, as well as the karaoke microphone is easy, especially familiarized with the instructions, how to connect a microphone to a laptop for karaoke. But only for this will need certain adapters. The fact is that on the housing of any laptop there are special connectors designed to connect the headset. The number of such connector may be different.
The most modern laptops are equipped with a single connector, connecting the headphones or a microphone into it, the computer itself recognizes the device, instantly activating it.
Laptops that were produced in just a couple of years ago have two connectors, near which there is a small picture, prompting the user for the purpose of the connector.
If the user wished to connect the karaoke microphone, he may face a small obstacle. The fact is that the connectors are 3.5 mm sizes, while the microphone-karaoke plug has a size of 6.3 mm, so connecting immediately such a headset is simply impossible.
In this regard, it is necessary to initially visit a specialized store, in which to acquire a special adapter, providing the transition from the Jack's connector to "Mini Jack". The adapter appearance is similar to the cylinder, one side of which is 3.5 mm, and the second is 6.3 mm.
After connecting the adapter, the karaoke microphone can be successfully connected to a laptop. Next, the operating system itself recognizes a new device, automatically installs drivers, upon completion of such actions, the karaoke microphone will be ready to use.
If the operating system is outdated, then the driver to the karaoke microphone has to be installed in manual mode.
Connecting a wireless device
Modern devices, including microphones and headphones, can be equipped not only by Jack connectors, but also also a USB input. However, even such a headset is not the most popular.
A more practical and attractive attention of the modern user is a headset related to a variety of wireless, the relationship with which is ensured by the signal.
If the user has a desire to establish such a headset, does not interfere at all, it does not interfere with how to connect wireless microphone To laptop.
Connecting such a microphone is not accompanied by difficulties, since all steps are almost duplicated when the headset is connected to the USB input.
Wireless headphones and microphone are supplied with the receiving mini-device with a USB input, which is inserted into any USB connector, after which the operating system will determine the device, installs drivers and invite the user about the successful installation and the possibility of further use of the headset. The user should only pay attention to the switch set on the headset, in the "OK" position.
So, the installation of the headset is not accompanied by difficulties if you prepare for this process in advance, acquiring additional adapters, as well as carefully studying the necessary instructions. Such actions are easy to continue even beginners who successfully done the first time such steps, will subsequently will not consider them as a problem.
Original entries and comments on