the main / Multimedia / How to remove the display of hidden files. How to hide the section

How to remove the display of hidden files. How to hide the section

If in the "My Computer" window, we see several sections, and on one of them are important data, which unauthorized persons should not have access, we can hide it in the system.

The hidden disk will not be visible in Windows Explorer, but access to it can be obtained via the command line or entering the drive letter in the address bar of the conductor.

Hide disk drive through drives

If you want to hide disk in windows Using a panel Disk management, → Right-click on My computer (or This computer - Depends on the system version) and select Control.

In console Computer Management Go to the section Storage devices.

Now double-click on the "Disk Management" snap.

Opens disk management console And you can view all the disks of your PC.

Select the disc you want to hide, and right-click. Choose And click on the Delete button.

If the system requests confirmation, click OK. Now specified the disk will be hidden.

Hide disk using Group Policy

At the beginning, call the Start menu or the sidebar (or press Win + R) and enter the command: gpedit.msc.

The "Local Group Policy Editor" window opens, in which we can set up a lot of useful windows functions - Including what letters should be hidden in the system.

In the window Group Policy, it is necessary to reveal the branch User configuration → Administrative templates → Windows components → Windows Explorer.

In the right window "Parameters" find a feature named Hide selected discs from the My Computer window And double-click the mouse.

A window appears in which we can configure which disk should be hidden in the My Computer window. We need to select the item is enabled and select the necessary combination of disks, for example: limit only disk D:

After applying the changes, the selected disk will not be seen in the "My Computer" window to restore it, you need to select the option in the same window Turned off. Thus, all the default discs will be visible in the Windows system.

Hide disk using the Windows registry

Another way hide disk in Windows – change registry key list.

Press the Win + R → key combination → Enter the Regedit command and press ENTER. The system will ask for confirmation, click Yes. The registry editor opens.

Run along the path below:

HKEY_LOCAL_MACHINE → Software → Microsoft → Windows → CurrentVersion → Explorer

Here you have to create new parameter DWORD, To do this, click in the Explorer window with the right mouse button and select Create → DWORD parameter (32 bits).

Name it Nodrives.and double-click on it to change properties. Now the console will open where to enter the values. In the value field, select the disk you want to hide. Each letter has a unique value, as shown below:

A: 1, B: 2, C: 4, D: 8, E: 16, F: 32, G: 64, H: 128, I: 256, J: 512, K: 1024, L: 2048, M: 4096, N: 8192, O: 16384, P: 32768, Q: 65536, R: 131072, S: 262144, T: 524288, U: 1048576, V: 2097152, W: 4194304, X: 8388608, Y: 16777216, Z: 33554432, ALL: 67108863

Select the appropriate value for the disk and enter this number in the "Value" string. Also select a decimal calculus system for the base section. For example, if you want to hide the G disc, then enter 64:

If you want to hide two discs, for example, E and G, then the value can be the value of one value → 80 (E \u003d 16) + (G \u003d 64).

Restart the computer and drives will be hidden. If you want to return the disks back, change the key value to zero, or you can delete the registry key Nodrives..

Hide drive using command line

Open the command line (Win + R → CMD → ENTER), enter the command diskpart. And press ENTER.
A type List Volume And press ENTER.
Now select the type and digit of the letter of the disk you want to hide (for example, a g). For example, it may be SELECT VOLUME 6.. Press ENTER.
Enter Remove Letter G. And press ENTER.

You will see a message - DiskPart successfully deleted the letter of the disk or the mount point.

To return a hidden disk, Perform steps 1-2-3 mentioned above.

Use the command Assign Letter G. And press ENTER. This will show the disk in the conductor.

You can also use free programstype hidecalc to hide disk in windows. Or read comments below.

These are the folders for which the "hidden" attribute is set. Usually folders with such an attribute are not displayed in the conductor. In order to hidden folders started displayed to make changes to the settings operating system. In this material you will learn how to show the hidden folders in Windows 7.

In order to force the Windows 7 operating system to show hidden folders, we need to open any folder and click on the Alt button on the keyboard.

After pressing the ALT key, under address line A number of drop-down menus will appear: File, Edit, View, Service and Help. Here we need to open the "Service" drop-down menu and select the folder parameters item.

After that, a small window called "folder parameters" appears in front of you. In this window, you can configure all the basic parameters that relate to the display of folders, files and disks in Windows 7 explorer.

It should be noted that if you fail to open the folder parameters window through the drop-down menu, you can use the search. To do this, open the Start menu and enter "folder parameters". After that, the operational windows system 7 will find the necessary program And suggests it to open.

So, you opened the folder parameters window in order to show the hidden folders in Windows 7 you need to go to the View tab and find the parameters that are responsible for displaying hidden folders.

You need two parameters:

"Hide protected system files"- it needs to be disabled;
"Show hidden files, folders and discs" - it must be enabled.

After making changes, close the "OK" button by pressing the "OK" button to save the changes. After that you can see hidden folders and files. Now, if there is such a need, you can remove the "hidden" attribute and the folder will become normal. To do this, right-click on the folder and select "Properties". After that, turn off the "hidden" function and close the window.

After you took off the "hidden" attribute, the display of hidden folders can be disabled. Further this folder will be displayed anyway.

Hidden files in Windows are updated and used by the system and programs. You can not find them easy. This prevents the folder or the file deleting or moved, which should be where it is located. If you delete a hidden folder, file, then know-it important information For your requirement software and systems so that it functioned. Knowing how to enable hidden folders in Windows, you can resolve problems and other problems that may occur in the system. Sometimes you need to open hidden folders and files in Windows to clean "Temp" and all sorts of temporary files that are clogged on the system disk. Not all optimizers with default settings clean your computer from clogged files. Sometimes you need to enable hidden folders and brush manually scored temporary files. There are times when you need to hide folders.

How to show hidden folders in Windows 10

Open the conductor, it is "this computer". Click the View tab and check the "Hidden Elements" checkbox. If you do not have the "View" tab, then stretch the window wider and it will appear.

How to show hidden folders in Windows 7

Open the "Start" menu in the search Write the word "folders" and in the search for the search, click "Show Hidden Files". Click the View tab, scroll to the easiest and "Show hidden files, folders and discs".

How to show hidden folders and files in Windows XP

Open My Computer, click the Tools tab and the Folder Properties drop out. Next, scroll into the end and turn on the display of files.

Number and content hidden partitions Switch from the manufacturer to the manufacturer. But as a rule, on Windows computers you can find the following sections.

Section "Reserved by the system"

Windows 7, 8 and 10 create the section "Reserved by the System" when you install them. Windows does not assign the letter to this section, so it is usually not visible in the "Explorer". But if you launched "managing partitions" or a similar utility, then probably noticed this section. Why is it system?

The section "Reserved System" performs two functions.

First, it contains a system load manager and data. It is from here that the system boot begins.
Secondly, here are the files used by the system utility for encryption BitLocker. This is necessary to download the system if you decide to encrypt the system partition.

The "Reserved System" section takes 100 MB of space in Windows 7, 350 MB in Windows 8 and 500 MB in Windows 10. Usually, the partition is created during the installation of the system and is located in front of the main system partition.

Section of recovery

This section contains images of a system from the manufacturer necessary to restore the system and return to factory settings. If you delete this section, then make it impossible to return to the factory settings in the environment. windows restoration or through the recovery utilities from the manufacturer.

Sections of the manufacturer

Some manufacturers of laptops, such as HP and ASUS, create another additional partition on their disks. It may contain drivers for a laptop, extra software, firmware for bIOS updates And other system data.

How to delete or hide system sections

Before changing or deleting system sections, consider such moments.

This should not be done if your computer or laptop is warranty.
It is worth making a copy of the section just in case. For example, to save the license to the system purchased with the laptop.
Have with me boot disk With Windows to reinstall the system if you break something.

How to delete the section

If you still want to delete system sections to or get rid of preset applicationsthat you do not need it can be done in several ways.

First, you can use such programs to manage partitions as Acronis Disk Director or Paragon Partition Manager. Or delete a section in standard "Windows Management".

Secondly, you can simply delete unnecessary sections via the command line.

Open the command prompt on the administrator name and enter:

Then we display a list of sections:

Remember the number of your section and enter:

sELECT PARTITION number_ selection

Finally, we introduce:

dELETE PARTITION OVERRIDE.

And the unnecessary section is removed.

How to hide the section

Typically, system partitions are not displayed in the "Explorer" and are not particularly noticeable to the user. But if one of the system sections for some reason has become visible and annoying you, it can be easily hidden.

Call "section management". To do this, you can click Windows + R and enter diskmgmt.msc.. Then, find the desired partition, click on it right mouse button and select the menu item "Change the letter of the disk or the path to the disk". Then delete the drive letter.

Now the unnecessary section will stop displaying in the "Explorer".

How to prevent the creation of a reserved section

You can prevent the creation of a reserved section when windows installationAlthough it is not recommended to do this. But you can install boot files Directly in the system section.

Start installing Windows and press SHIFT + F10 to call the command line window.
Enter diskpart. And press ENTER.
Create a new section in unbalanced space. For example, if you install the system on empty diskYou can just choose it entirely. Or create a separate section for documents and other of your data if you want.
Continue the installation. When you are offered to create a new section for the system, simply select the one created in the previous paragraph.

So you will do and boot files, and the system in one section. True, you will not be able to use BitLocker. But reduce the number of sections occupied by the system. It can be useful if you install Windows Second The system and do not want it to make sections.

Why, in principle, it may be necessary to hide sections hard disk? Most often, such a need appears after in the explorer, in addition to the C and D disk, a few more sections are displayed, which in the idea should be hidden.

Usually, such partitions include discs where files are stored to restore the computer to the factory state or the system partition responsible for the OS boot, which is created when installed Windows.

So, these sections are usually hidden not only because they will interfere with users, but also because in essence they are not intended for everyday use, but random or deliberate changes to them can lead to the emergence of problems in the operation of the operating system. Also, sometimes sections are hidden in order to hide some important data that guests of your computer would not accidentally find them.

So, to your attention instruction on how from the "My Computer" window to remove or hide the hard disk sections.

Hide the usual section in disk settings

Hiding partitions using the disk management utility belongs to one of the simplest and rapid ways.

To get to this utility, you should go to "Management" and open the section "Disc Control".

In the properties that appear, press the "Delete" button.

After that, the disc will no longer be available in the conductor. But, minus this method that conventional discs you will be able to hide without any problems, but with system so it does not always work.

How to hide system drives in the command line

OK, consider another option that will help us hide not only the usual, but also system partitions of the hard disk.

Let's start with the fact that we first open the command line window with administrator rights.

Now in order, perform the commands that I will give below. In this case, each lift is confirmed by the "ENTER" key.

Diskpart. - starts the hard disk properties utility;
list Volume – Shows a list of available partitions on a computer;
sELECT VOLUME (specify the section number) - for example, I will have volume 2;
rEMOVE Letter \u003d D - The team hides the section. By the way, in order to return everything back to need to be prescribed instead of this team. assign Letter \u003d E ;
eXIT

Having completed the work of S. command lineThe hidden disk should be lost and no longer displayed.

How to hide discs in the registry

As usual, in this article, we will not ourselves without the registry. Editing parameters and registry values \u200b\u200bis also one of the ways to hide unnecessary partitions hard disk. Moreover, I want to say that this method works on all versions of Windows, and will help hide not only the usual sections, but also systemic.

Using Win + R and the REGEDIT command ,.

Used navigation buttons We fall into the section:

Create a new DWORD parameter and give it a name .

In the parameter we created, specify the digital value of the letter of the hidden disk.

In general, the chip is that specifying as a value, the letter of the disk, you will not work. Just every letter has its own digital value, which should be made in the corresponding field.

For example, I want to hide the Disk "D". To do this, I open the "nodrives" parameter, I note that we will use a decimal number system and point to the value field "8". If you need to hide several disks then, fold them and the result obtained, enter the "nodrives" parameter

After that, the disk should abide from the conductor. If nothing happens, then simply restart the computer to apply the parameters.

Hidden partition hard disk using group policies

Editor group Policy, one more place where we can hide our discs or sections.

In order to get there, run the "Run" window, remind, this is done using the "Win + R" keys, and copy or prescribe a command there. .

In the "User Configuration" section, go through the following "administrative templates" folders, then in Windows Components and Finally, Windows Explorer.

Double click open the parameter:

By confirming the new parameters by pressing the "OK" buttons you selected wheels or partitions should be lost until you decide to return them back.