inputLong turn on Windows 10. Disable accounts
Today it is important for all the technique to work smartly and reliably. When Windows 7, 8, or 10 is loaded very long, there is an urgent need to eliminate the problem.
At speed windows startup Can affect several factors:
- computer performance level;
- overloaded hard disk and other, important problems.
Than more than processor The computer, the faster it will load system functions. Usually, personal Computer Or the laptop is loaded slower if there are few places on your hard disk. If a hDD It is very loaded and the places are not at all for OCs and temporary files - the computer starts to be brazed and loaded for a long time. Consider several options for solving this problem.
We remove unnecessary files
The first thing to do is when the system starts for a long time - delete unnecessary files Both programs, as well as temporary elements of the system. Most programs (including OC itself) are removed not all temporary files that are used. They accumulate in the folder C: \\ temp, C: \\ Windows \\ Temp. Despite the fact that they weigh up to several kilobytes, several gigabytes of unnecessary information can be gained in a large period of time, which only takes place. This is what this folder looks like:
Clean disc
Perform a hard disk defragment if Windows 7, 8, 10 loads long. The data on the hard disk is fragmented, which makes it difficult to search and sort. Periodically, it is necessary to carry out such a procedure so that after the Windows update is not loaded for a very long time.
To do this, you need to perform a few simple actions:
- go to the "Control Panel";
- next - "System and Security";
- click "Administration";
- open the "Optimization of Disc".
We use standard Windows tools
To determine the speed of loading Windows 8 after updating and finding out for which reasons this happens, you can use the built-in system tool. Simultaneously press the Win + W key combination. After a small manipulation you will see search string. Here enter the "View Event Logs" command. Such a simple action you will learn the cause and magnitude of the problem.
We delete unnecessary programs in the autoload system
If you have OC Windows 10, which is restarted for a long time and updated, pay attention to the list of "autoloads". Only it will be better not to act through the Task Manager tab, and with the Autoruns utility.
We update the System
If the system is very slowly loaded today, then it's time system updates. Some of them are loaded for quite a long time.
Often updates are loaded automatically, but they can be installed in manual mode. To do this, take a few simple steps:
- Call the "Start" menu - "SETTINGS".
- Open "Update and Recovery".
- If updates are already available - click "Set".
- Wait until the updates are installed and restart the PC.
Verification of programs operating in the background
Background programs in autorun also need to be checked. The problem is that many of them do not need the user now. In this case, the best way for users - disable these unnecessary applications. To do this, call the task manager (by pressing the WIN + X key combination). In the list that opens, select "Startup". Analyze and disconnect those programs that you do not use. Delete only those applications that you know not to disrupt the computer.
When you use our advice, restart Windows. It is necessary to check whether the running of the OS has become faster or the problem is not solved. Take advantage of the system tools that are described above, or by a regular stopwatch. Check your computer for viruses: Sometimes the car is started for a long time due to malicious programs.
We hope our article was useful to you, and the question will no longer ariselong loading windows computer 7, 8, 10 when turned on.
And so, you are pleased to spend the evening at the computer - you play, communicate, walk on the network, and Windows is simply performing your teams. All perfectly! Idyll! However, you should not think that it will always be so. Know: Cooker Windows prepares you sludge. She is just waiting for a moment when you will overtake some urgent things to ... show you Fig. More precisely - not to boot.
Failure loading windows - The phenomenon is ordinary, but according to the law of adhesion it usually happens when the computer is very necessary. So that the situation did not find you surprise, it is important to prepare for it in advance. Let's talk to do if Windows 10 is not loaded, why this happens and what each user should have to solve this problem as fast as possible.
Why she doesn't load
Poligins of the unguidity "Dozens" are software and hardware. Software are associated with the removal (damage) of the boot and system files and / or responsible for launching registry sections. They are usually to blame:- Install another one operating system In another drive section (the new OS replaces the loader with an old one).
- Experiments with disk sections - compression, combination, separation, formatting, and so on. Typical errorwhich is just a consequence of this, "" (system loader is compressed).
- Unqualified editing with the hands of the system registry.
- The use of various "tweekal cleaners" to accelerate and decorate the system, which "randomly" change the registry keys responsible for starting the registry keys, patch files, etc.
- Incorrectly inserted windows updates Or turn off the PC during the installation of updates.
- Viruses and antiviruses. Do not be surprised, the latter can bring no less harm than the first to use them thoughtlessly. It's like swallowless without parsing, hoping that among them will be suitable.
- Fabune hardware drivers. Loading in such cases is usually interrupted in a blue screen of death, sometimes with the name of the driver name, which caused the problem.
- "Corrected" applications in autorun. The failure occurs in the late loading stages - shortly before the desktop appears.
Hardware reasons for notars of Windows 10:
- Changing the order of the survey boot media In the BIOS (the computer is looking for Windows loader not on the system disk, but, for example, on flash drives).
- Connecting a disk to the wrong port on the motherboard on which it worked before - if the failure occurred after extracting and re-installation hard disk to computer. The error inaccessible_boot_device is manifested on the blue screen of death.
- Malfunction or poor connection of the system drive. It is often manifested by the message "" (the system boot is not available) on the black screen. Sometimes - stops, restarts, BSODs at any stage of loading.
- Malfunction of RAM. As with the disk problems, manifests itself with reboots and blue screens at any start stage.
- The failure of the elements of the video subsystem. Windows can boot, but you will not see it, as the screen remains black. Sometimes that the system has booted, you can only find out on the characteristic sound.
- Other equipment malfunctions, for example, motherboard, periphery, etc.
Prepare for the worse better in advance
PSCCRAK 80-90% of Windows 10 cases fall on software failures, today's article is devoted to the methods of struggle with them.So, to restore the normal launch of Windows, the computer needs to be downloaded to the recovery environment. If you previously used Windows 7, then you know that this environment is installed on the disk along with the main system. And to enter it, you need to open the menu additional ways Downloads (clicking after enabled F8) and go to section " Troubleshooting».
In the "dozen" restoration environment, too, is, but since the time of its loading in comparison with Windows 7 significantly decreased, the interval when you can call the boot menu, it also became much shorter. The chance to have time at this time to press the desired key (more precisely, the combination of F8 and SHIFT) remained only in one case: if the system is installed on the MBR hard disk and the quick start option is disabled in the PC power options or laptop. If the system is on an SSD or hard disk gPT standard, It will take the bootable media.
To save Windows 10 to optimally hold its official distribution on a DVD or flash drive, and the same bit that is installed on the PC. As an alternative, you can use the boot package utility MS DART 10. (Microsoft. Diagnostic and Recovery Toolset For Windows. 10 ).
MS DART distributions (in the past they were called "ERD Commander"), officially apply to paid subscriptionHowever, they are easy to find on the network. For example, on torrent trackers. Windows 10 images are available for download.
I will use the "dozens" home, recorded on blood flash driveSince everything you need in it.
We load on Windows 10 Recovery Wednesday
In the case of the loading of the "dozen", as a rule, trying to self-restore. When she succeeds, the user does not receive any notifications, just launching the computer lasts longer than the usual one. If the screen fails, a message may appear on the screen, as in the screenshot below, but more often it will be simply "Malevich's Square" with the cursor or without or or blue screen Death with sad emoticon.
A variant of failure, displayed in the screenshot, can be considered relatively favorable. Clicking, " Extra options »You will fall on the recovery environment installed on the hard disk, and you do not have to boot into it from an external medium. But we will consider a heavier case when the system does not show any signs of life.
Connect the media to the computer, reboot, and make it the first boot device.
The window that you will see the first after downloading from the flash drive (DVD) will prompt you to select the language of the system. If Russian is selected, click " Further».
Next will be asked to go to installation or windows restoration. Click " System Restore».
On the screen " Selection of action"Click" Troubleshooting" Here you are in place.
Parameters for restoring the launch "Tens"
In the Recovery Settings section (screen " Extra options") There are 5 subsections:- System Restore. When choosing this option, standard Windows utility starts rstrui.eXE, the purpose of which is to roll back the system on one of the saved checkpoints.
- Restoring the image image. Launches windows deployment wizard from backupcreated by its own funds.
- Recovery when loading. Corrects errors of boot files and sections.
- Command line. Allows you to run various system utilities.
- Return to the previous assembly. Performs rollback to earlier set version OS If it has been updated to Windows 10.
Rollback to the checkpoint
In Pros, a newly created checkpoint - best tool First aid with all types of system failures, including when you do not know their cause.
The click on the first point launches, most likely, already familiar to you a recovery utility. It is enough to choose the date and time you want to roll back, and follow the instructions on the screen.
To use this option, you must have at least one saved checkpoint and a working system restore function. If the latter has been disabled before the failure, skip this step and try other methods.
Recovery when loading
This option effectively helps in the event of damage or delete boot files, for example, when installing an additional OS to another section of the disk after Windows 10. And also with random formatting or other manipulations with the section "Reserved by the System".
Command line
To the Omandna line itself does not restore anything, but makes it possible to run other tools. So, with its help, we can open windows ExplorerTo see the location of the installation (the letters of partitions in the recovery environment and when the system is normal, the system usually does not match), run the system file correction tool, registry editor and loader recovery utility.
If you roll back to the test point and auto-installation at startup (first and second options) did not give the desired result, the cantilever utility often helps to raise the "dozens" BCDBoot. She re-poses hidden section "Reserved by the system" and copies boot files from the Windows directory to it.
To work correctly, the BCDBoot must specify the location windows folders On hard disk. To find out if you can use the utility Diskpart.But I believe that it is more convenient to do it through the conductor.
So, to get to the conductor, open the command line and launch in it notepad ( notepad.).
Being in a notebook, let's go to the menu " File", Choose" Open"And move to the folder" This computer" Next, we will pass through the partitions of the disk and we define, in which of them is a system directory. In my example, this is Disk D.
Next, we return to the command line and execute the instructions:
BCDBOOT D: \\ Windows
Note, you have the way to system folder May be different.
In 80% of cases, this is enough so that the "dozen" could normally start. But about 20% of cases, the command works incorrectly - not all boot files restores. To help a little utility, before executing the instruction on the command line, you need to format the reserved boot section (in my example - drive C) FAT32.. It can also be done with using diskpartBut I believe that it is more convenient - through the conductor.
Two are the following console teams Rearrange boot records Total drive (MBR) and system partition (VBR). They are used to solve problems with launch windows On the MBR discs.
Perform teams each other in this order:
bootrec / fixmbr
bootRec / FixBoot
If you accidentally perform them on disk GPT., nothing terrible will happen.
In some cases, problems with the launch occur due to damage not bootable, but the main system files, for example, after a viral attack. How you may know, to fix them in Windows there is a special utility SFC.eXE. So, thanks to the command line, it can also be launched in the recovery environment.
The command for searching and correcting the errors of protected system files in the recovery environment looks like this:
sFC / SCANNOW / OFFBOOTDIR \u003d D: \\ / OFFWINDIR \u003d D: \\
Parameter offBootdir.determines the location of the main one boot section (in my example, how do you remember, this is a D), and offwindir. - The path to the system folder.
Using the command prompt, you can correct the registry errors of the unloaded system. But, unlike previous instructions, it requires certain experience and qualifications, because the user you just need to know what to correct and how erroneous records should look normally.
Starting on the registry error leading to the Windows 10 utilization failure, I will not, since this is a separate big article theme. I will only describe the editor startup methodology Regedit.eXE In the recovery environment and opening the registry files, so that you have the opportunity to correct the errors that you know.
So to start the editor writing the word on the command line regedit. and click ENTER.
You will see that in the utility window that opens, some registry is already present, but not the one that is needed. Before us is your own recovery environment, and we are interested in the main system.
To download in regedit files windows registry 10 Select the section in the left half of the window in the left half of the window. HKEY_Local_Machine or HKEY_Users., open the menu " File"And click the item" Load bush».
In the conductor window, which will open after that, go to the folder D: \\Windows \\System32 \\Config(You can have another disk letter) and select the desired file.
Files without expansion in the \\ System32 \\ Config folder - and there are components (bushes) of the Windows 10 registry. The main circle are circled.
We give a bush any understandable name (it will be temporary until you unload it) and click OK.
Following the section in which we downloaded the bush, and here it is before us, available for editing. In my example, this is a registry file. software.I temporarily renamed Soft_win_10.
After making edits, I will again go to the Editor menu. File"And click" Unload bush».
Return to the previous assembly
When you return to the previously installed assembly, the user's personal files will be untouched, but everything that has been done after the update will be canceled.
Restoring the image image
In the alignment of the image from the backup helps to return the system of performance at any problems, but the problem is that almost no one creates these images.If you are an exception to the rules and the happy owner of a relatively fresh backup, select the paramette in the list of parameters.
specify the recovery program of the image storage location and follow its instructions.
All data of the inoperable OS will be replaced by good copies from the archive. If there are user files in its composition, it will also affect them.
Good recovery!
More online:
Windows 10 is not loaded: why it happens and how to restore the launch Updated: April 23, 2017 by the author: Johnny Mnemonic
If your Windows 10 computer is loaded for a long time when turned on, we have prepared several tips that will help solve this problem.
As you know, Microsoft regularly releases new Windows 10 updates. One of the latter is Anniversary Update (AU). The update contains many new features, including new features. voice assistant Cortana and system optimization in all directions.
However, not everything is perfect. Many users complain that after the update, the Windows 10 computer is loaded for a long time when turned on. If you are one of these "lucky", then let's consider several solutions to this problem.
Note: This article presents general solutions to this problem, but this is not full list. If you followed all the advice from our article, and still long loads the Windows 10 computer when turned on, it is possible that you have more serious problems with the computer.
1. Turn off the quick start function
This feature is one of the most problematic when it comes to the Windows 10 computer loading time. The default function is enabled, and in theory it must reduce the computer boot time when you turn on, but for many users it works in the opposite direction. If you notice that your Windows 10 computer is loaded for a very long time when you turn on, the first thing you should do is disable the quick start function.
1. Open the Start menu and enter "Power" to go to the appropriate section.
3. Here you remove a tick next to the "Enable quick Start».
Note: You will need to provide the permission of the administrator to change the settings in this section, so click on the inscription "Changing the parameters that are not currently available" at the top of the window.
After you turned off the quick start function, click Save Changes.
If you do not see the "Enable Run" option, then you do not enable sleep mode (hibernation mode). To enable it, open the command prompt on the administrator name, and enter the following command:
- PowerCFG / Hibernate ON
2. Configure virtual memory settings
Virtual memory is a function that Windows uses to highlight a part of the hard disk as RAM. Of course, the more RAM, the more tasks your system can handle simultaneously, so if Windows is approaching the maximum use of RAM, the computer goes into the repository virtual memory.
Some users say that Windows 10 independently changes the virtual memory settings by causing problems with the Windows 10 computer boot speed when turned on. You should check the virtual memory settings and change them if there is such a need.
1. Enter the "System" in the Start menu to open the Viewup About Your Computer window.
3. Open the "Advanced" tab, and in the "Speed" category, click the "Parameters" button.
4. Here, select the "Provide Best Speed" option, or you can choose effects yourself.
5. Then open the Advanced tab and click the Edit button.
7. Users who have long downloaded to the Windows 10 computer when turned on, report that the recommended size corresponded to the current memory size. If you also have the same, then remove the checkbox at the top of the screen "Automatically select the scope file".
9. Restart the computer.
3. Disconnect the new Linux terminal
Windows 10 comes with a fully new Linux Bash terminal. This is an interesting addition for developers, but ordinary users It will not bring any benefit.
Note: this feature Not included by default, so if you do not know what Bash is, you are most likely to skip this step.
1. To disable terminal LinuxOpen the Start menu and enter the word "components".
3. Scroll down to the "Windows subsystem for Linux (beta version)", and uncheck the checkbox.
4. Restart the computer.
4. Update graphic drivers
Many users inform that updating graphic drivers Solves the problem with the fact that the Windows 10 computer is loaded for a long time when turned on.
1. Right-click on the Start button and select Device Manager.
2. Here click on the arrow next to the "video adapter" to find out which video card you use.
3. Then go to the official website of your video card (or on the manufacturer's website of your laptop), and download the latest graphics drivers.
5. If nothing helps, reinstall Windows
If you have completed all actions above, and still loads the Windows 10 computer while enabled, then reinstall Windows 10 with the latest update.
Output
The problem with the fact that the Windows 10 computer is loaded for a long time when turned on, is quite popular among users, especially after the release last update Anniversary Update. We hope that our tips helped speed up the download of your computer when turned on.
The reduction in Windows loading time is one of the main tasks of Microsoft developers, however, many computer owners who do not use the "Quick Run" function continue to face the problem of slow download. As a rule, recently installed system It starts pretty quickly, but it takes some time and becomes apparent that the computer has become long loaded. Most often, this is caused by quite natural causes, although it is impossible to exclude the presence of software and hardware problems.
In any case, if Windows 7/10 is very long loaded when turned on, it is advisable to find the reasons for such a delay and eliminate. Slow start of the system can cause condescribed autorun applications, disk space lack, severe fragmentation file System, Pollution of the system unit, hardware malfunctions, malware and other, less common causes that will be subject to below. But first things first.
Analysis and cleaning of autoload
There is a lot of useful and necessary programswhich when installing are automatically prescribed to autoload. Running together with the shell of Windows, they brake the boot of the desktop, which is why the computer itself loads for a long time when turned on. The solution is to clean the startup, to remove all secondary applications from it. You can do this in different ways.
The easiest - disable unnecessary programs in the Tab Task Manager tab. Opening the Manager any convenient way to you, switch to the specified tab and carefully read its contents. Remove unnecessary applications from the bus station by clicking on the appropriate entry and choosing in context menu "Disable".
If Windows 7/10 is loaded for a long time due to demanding software resources in autoload, it will have to solve the problem.
At the same time we recommend checking the autoload directory and remove the labels from there unnecessary programs, If there are any. It is located at USERPROFILE% / APPDATA / ROAMING / Microsoft / Windows / Start Menu / Programs / Startup (You can get into it by performing short team shell: startup.). To clean the startup for all users of the computer, go to the catalog C: / ProgramData / Microsoft / Windows / Start Menu / Programs / Startup.
Remove programs from autorun can also be through the registry. Team regedit. Open the registry editor, expand the branch HKEY_CURRENT_USER / SOFTWARE / Microsoft / Windows / Currentversion / Run And delete the recording of unnecessary applications in the right column.
For the contents of the startup, the same key is responsible for all users, but in the HKEY_LOCAL_MACHINE section.
Experienced users can recommend Autoruns. - utility for managing autoload. This small, but very powerful and effective tool Allows you to monitor work not only custom programsBut also drivers, system services and modules.
Lack of space on the system section
In principle, the level of completion of the system partition should not have a critical effect on the Windows loading speed, however, such a dependence is present. Perhaps the computer is long loaded just because the disk is clogged. The main solutions are two or increase the size of the partition with the operating system at the expense of another partition, or delete (transfer) part of the data.
High level of fragmentation
In Windows 7, 8.1 and 10, disk defragmentation is performed automatically, but it may be that this function for some reason turned out to be disconnected. As a result, the file system on the disk with will be highly fragmented, which will lead to a decrease in performance and, naturally, loading rates. Open the disk properties with, switch to the "Service" tab and click "Optimize".
Make sure that the schedule defragmentation is turned on, and the degree of fragmentedness of the system partition does not exceed 7-10 percent.
Otherwise, perform defragmentation and turn it on in the settings.
Pollution system block
The reason that the computer from Windows 7/10 when turned on slowly loads, the system unit can be dusting. The dust layer prevents the normal heat exchange, the processor and other hardware components are quickly overheated, as a result, the performance drops sharply. Strong pollution, as well as insufficient work of coolers can lead to sudden, and in some cases - to the fall of the system in BSOD. When dust detected in system block We carry out cleaning, check the operation of the fans, at the same time pay attention to the state of the thermal paste.
Malicious programs
The overwhelming majority of viruses do not seek to bring the system or reduce the effectiveness of its work, however, loading into rAM In the early stages, they consume part of the resources, because of which Windows 7/10 is slowly loaded. Such, for example, Trojans are cryptocurrency miners capable of downloading a 80-100 percent processor. Carefully check your PC optional anti-virus scanner, experienced users Can analyze the components of the startup using the same Autoruns utility.
Physical wear of hard disk, broken sectors
Another reason that Windows 7/10 began to load a long time, it may well be the physical wear of the magnetic surface of the disk, the presence of broken and rewritten sectors on it, file system errors. If the drive is old, it will be very desirable. For these purposes it is best to use special utilities – HDD Scan. or Victoria HDD.. In Windows to identify and correct file system errors there is a built-in chkdsk., started either from the disk properties on the "Service" tab, or from command line With parameters / f / r.
If the apparent causes of the Windows start delay have not been detected, but the computer still loads long when you turn on, you can try to perform the planned optimization of the system. It is made either manually or using third-party optimizer applications. The second way is more like novice users, as it is safer. Using similar programs, you can disable all secondary and unused windows servicesstarted when downloading.
Experienced users can disable unnecessary functions through the "service" and applet "Install and delete programs".
So, if you do not use printers, print service and documents can be disabled. Customer folder client, service can also be disabled activation of Windows, Viewing XPS, HYPER-V component, SNMP protocol, server and Telnet client, IIS, CMAK, MSMQ web core, RIP listener, simple TCPIP services, Tiff Ifilter filter. Deactivation of these services will free part of the memory.
Experiment with the fast launch function included by default in Windows 8.1 and 10. It must speed up the load, but sometimes it gives the opposite effect. Try it to disable it in the power parameters.
It is possible to free up additional resources and speed up the desktop load by deactivating some visual shell effects. For this discover System Information - Advanced System Parameters And press the "Parameters" button in the "Speed" block.
Disable part of the effects or generally select the best speed mode.
And now, in the speed of the speed parameters, switch to the "Advanced" tab and click the Edit button in the "Virtual Memory" block.
In some cases, compliance with the recommended size of the paging file to the current memory size caused a delay when booting Windows. Try to change the size of the swap file, but remember that it should not be too small, especially on a PC with a small volume of RAM.
What if the computer is turned on and after the fulfillment of all recommendations? Radical solution - reinstalling Windows, not always acceptable, but you can try to transfer the system to more fast disc SSD, if, of course, this feature is available.
Many say the problem when after upgrading to Windows 10 with Windows 7 and 8.1, the system has become too slowly loaded.
It has already been confirmed that the download problems arise not because of the large size of the new operating system, but because of malicious programs and non-optimized launch settings.
Microsoft has not yet released an update that will correct this error, however, there is an easy way to speed up the operating room windows systems 10.
How to fix slow download windows 10
Step 1.Windows 10 is still a rather vulnerable system without proper protection against malicious programs, especially if you have no antivirus installed, and you did not scan the system after the update. Thus, first of all, start the full scanning of the system using the anti-virus software that you use, and delete all viruses from the system.
Step 2.Press CTRL + SHIFT + ESC to open the task manager. Select the Tools tab and disperse with applications from the list, depending on which load they give. Disconnect all those programs in which the "Impact on Load" column is high.
For example, you can safely disable the services aMD drivers and NVIDIA from autoloading without harm to the graphics and system performance.
How to disable FastStartup and optimize Windows 10 boot
Step 1.Windows 10 activates quick loading and turning off through special settings that can be found in the power settings. Activate fast start You can from the control panel, the power setup menu.
Step 2.Select "Actions of the power buttons" in the column on the left, then click "Changing the parameters that are not available now." In the item, new settings will appear in the option. Check the box next to "Enable Quick Start" and click "Save Changes".
Step 3.Restart the computer and clamp Win + R as soon as the desktop appears. Enter "Services.msc" in the "Run" dialog box and press ENTER.
Step 4.Pay attention to the list of services that continue to start. Right-click on them and change the settings from the standard to the deferred launch, then click "Save".