Hot Sleep Key in Windows 10. Methods Management Methods

Today, many users do not turn off the computer at all, as they did before, but send it to sleep until the next session. Especially like the owners of laptops are especially like: working, they just slam the lid and go. But sometimes Windows 10 does not go into sleep and the computer remains to work. Again, for a laptop it threatens a quick battery discharge. If you have not noticed that the computer does not sleep, then for you in the future it will be a very unpleasant surprise.
What to do in that case and how to determine why the computer does not go to sleep?!

To do this in the operating room windows system 10 There is a great tool - system utility powerCfg.responsible for working with PC power system. One of the available keys is / Requests.. It displays a list of requests to the power system from applications and drivers. To use it, you must first run command line Windows with administrator rights by pressing the right mouse button on the Start button. As soon as you get to the command line, enter the command:
powerCfg / Requests.
If nothing bothers the computer to go to sleep, then the result will be the result:

But if Windows 10 does not go into sleep mode, then the list should be displayed:

In my example, the culprit - browser Google Chrome.where the task of downloading data to some server on the Internet remains. Among the most common causes of the usually left media players with a film or audio record. The user could simply turn the window and down the sound. And the program works and uses the appropriate devices. So, as you can see, find the culprit, because of which the PC does not go to sleep in Windows 10 turned out to be easier than simple!

Which many users are often confused or compared with sleep mode. In fact, it is not. These two power saving modes differ from each other and even intended for various gadgets.

What is the difference between the sleep mode from hibernation?

Many users are asked about how to enable hibernation in Windows 10. However, before you configure this mode, you should familiarize yourself with its features and characteristics of sleep mode.

• Hibernation mode Designed for laptops and netbooks for which energy charge is so important. When you activate this option, all programs that have been running from RAM are stored in separate fileand the device itself turns off. It turns out a laptop from this mode long enough. However, everyone running applications, open tabs Browser remain intact.
• Sleeping in windows 10, as in previous versions OS, for a while disconnects some hardware components. Cut the coolers noise, the hard drive is turned off. However, all open applications are saved to a separate RAM file and operate in standby mode. The computer comes out of this mode in counting seconds.
• There is also a third hybrid mode . It is intended for stationary computerswhich are connected to a weak power grid. Combines such a hybrid mode as a dream and hibernation. The active applications data are saved in a separate file. The system renews its work on the place where the user left it in just a few seconds, even if there were interruptions with electricity. Such a hybrid mode is more acceptable for old computers. Suitable for laptops.

How to disable sleep mode through the parameters section?

To disable or configure sleeping mode In Windows 10 via the parameter section, do the following:

• Click "Start", "Parameters" and choose the "System" section.

• In the left menu, select the "Food and Sleep Mode" section.

• Here you can see that there are two versions of the mode: Networking from the network or from the battery charge (if you have a laptop). To configure this option, you must install an acceptable option to turn the sleep mode.

• To disable sleep mode, install "never" in both options.

• Reboot your computer.

How to disable sleep mode through the control panel?

If you do not like that your computer goes into sleep after some time or after activating the mode it comes out too long, errors or malfunctions occur, this option can be turned off.

• Click "Start", choose the "Control Panel". From the list, select "Power Supply".

• In the left menu, select the "Actions of the Power Buttons".

• In a new window, click "Changing the parameters that are not currently available."

• Choose, in which case, the computer or laptop will switch to sleep mode.

• Below we put a mark near the "Sleep Mode" item if we want to include it. To disable the option, it is worth removing the mark.

• We maintain a change and reboot PC.

If, after completing all the above actions, the computer goes into sleep mode, it is necessary to check whether the hibernation or hybrid mode may work.

Sleep mode is used in the operating system - in order to save power consumption. Thanks to this, you do not need to turn off once again or turn off the computer and run all programs again when you need to move away indefinitely.

Many system functions,turning to sleep mode, stop working. In this case, the power supply is not fed to most computer components, except for RAM and processor. They are necessary to ensure that the equipment can exit sleep mode and saved information about the programs and files. Due to this, after exiting the application, the application and the program again begin to work actively.

Important! If the sleep mode is used on a laptop that is not connected to the network, the battery can discharge and the device will turn off. In this case, the operating system will automatically save all the details. However, in advance not saved information may be the abyss. It is worth remembering that a sharp de-energization of a device that is in sleep mode can harm the operating system.

When the computer "sleeps", it looks like it seems that it is turned off, the screen does not work, the only thing that gives it out is not a big noise from the processor. To break the sleep mode - it is enough just to move the mouse, click on any key or power button. If it is a laptop, then you may need to just open it.

Disable sleeping mode

No matter how good sleep feature is not easy for everyone. To disable it, it is enough to use one of the following methods.

Method number 1. Using the "Parameters" section

Unlike windows interface 7, Windows10 is done so that normal user Could quickly access the main settings for its device and the first way for this example. For some it will be more convenient, as it is easy to configure the desired parameters. Use one of the following options:

1. On the right, down to the "taskbar" click on the "Notifications Center" icon and open the "All Parameters" item.

   

2. In the Start menu, select "Parameters".

   

3. "Parameters" can also be found in the Start menu, in the "All Programs" section by selecting the "Applications" folder.

   

   

   

4. The last option is the easiest way - click the Win + X button combination. The "WIN" key sometimes on the keyboard is indicated by the Windows logo.

   

5. Going to "Parameters", select the first section "System".

   

6. Now you should click on the third in the list "Power and Sleeping Mode" list.

   

7. It has several settings items, among which will be "sleep." Here are two sleep mode parameters:

• computer work from the battery;
• computer work from the network.

In the opening list, you can choose, after any number of minutes or hours of inaction, the device will switch to sleep mode. To turn off this feature Fully, choose the option "Never" and in the first, and in the second case.

Method number 2. Transition to "Control Panel"

For those who are used to using Windows 7, most likely, it will be convenient to open the "Control Panel" and install all the settings there. To do this, you need to perform the following actions:

1. Go to the "Start" menu.
2. Select the Control Panel tab. If there is no such item, you can use the "Run" function, it is also in the "Start" menu. In the search bar, enter the word "condrol" and click the ENTER button.

   

   

   

   Important! If the window that openses looks like the illustration below, it means that the default operating system uses the "Category" viewer. To continue work, you should change the "category" on "small badges" or "large icons".

3. Find the "Power" tab.

   

   On a note! Open the power settings window can also be second. In the "Parameters" section (how to find, described in the previous method), in the "Related Parameters" subsection, click on "Advanced Power Parameters".

4. You will have two power management schemes "Balanced" and "High Performance".

   

5. Press the "Setup Power Scheme" option near the scheme that is used on your computer.

   

6. Next to the "Transfer Computer to Sleep Mode" item will be two opening list in which the "Never" parameter should be selected. Then, in no way from the battery, nor when connecting from the network, the computer will not switch to sleep mode.

   

7. By changing the parameters, click "Save Changes".
8. In the chart parameter adjustment window, you can change extra options Nutrition. To do this, click on the point with the same name.

   

9. Here you will find the opportunity:

Sleep mode and hibernation is the same?

Although the purpose of these two functions is almost the same - to ensure energy savings, nevertheless there are certain differences.

K An example, in sleep mode, the computer continues to work, only some functions are disconnected. A Information is stored in RAM or RAM. Due to this, literally from one action by the mouse or keyboard the device immediately starts.

With hibernation, everything is completely different. With this function, the computer is completely disconnected. All information B. open applications Collecting a separate file on the hard disk. After switching on, saved file cache is transmitted rAM, I. running programs, as well as open files Start active work.

So, the sleep mode is needed if you left the computer not for a long time. And hibernation is useful when it is necessary to suspend work for a long period of time and save the battery charge.

Outcome

Remove the sleep mode in the Windows 10 operating system is very simple. This can make even an inexperienced PC user. But even if, after reading this instruction, you have any questions, see this training video.

Video - How to Disable Sleeping Mode in Windows 10

If you do not want to complete the work with the computer completely, you can translate it into sleep mode, the output from which is performed quite quickly and while saving the last session. In Windows 10, this mode is also available, however, sometimes users face the problem of exiting it. Then it helps only forced rebootAnd as you know, because of this, all the incomplete data will be lost. The causes of this problem are different, so it is important to choose the right decision. It is this topic that our today's article will be devoted.

We have allocated all the options for the correction of the problem under consideration from the simplest and effective, to the most difficult to make it easier for you to navigate in the material. We will touch on it today are different parameters of the system and even turn to the BIOS, but I would like to start to turn off the mode « Quick Start» .

Method 1: Disable "Quick Start" mode

In the settings of the WINDOVS 10 power supply plan, there is a parameter "Quick Run"allowing you to speed up the OS start after completion. In some users, it causes conflicts with sleep mode, so it is necessary to disable it for the purpose of checking.

Translate PC to sleep to check the effectiveness of the process just performed. If it turned out to be unsolved, you can return the setting back and move on.

Method 2: Adjusting Peripheral Devices

Windows has a function that allows peripheral equipment (mouse and keyboard), as well as network adapter Display PC from sleep mode. When this ability is activated, when you press the keys, the user button or the transmission of the Internet package, the computer / laptop is awakening. However, some such devices may incorrectly support this mode, because of which the operating system does not work normally.

After the output of the waiting mode for devices is prohibited, you can try again to output PCs from sleep.

Method 3: Changing the hard disk shutdown parameters

When you go to sleep mode, not only the monitor is turned off - some extension boards and hDD Also go to this state after a certain period of time. Then the food to HDD ceases to flow, and when it comes out of sleep, it is activated. However, it does not always happen, which causes difficulties when the PC is turned on. It will help to cope with this error. Simple change in the power plan:

With this power plan, the power supply on HDD will not change when switching to sleep mode, so it will always be in working condition.

Method 4: Check and update drivers

Sometimes there are no pc required drivers Or they were installed with errors. Because of this, the work of certain parts is disturbed. operating systemAnd it may affect it the correctness of exiting sleep mode. Therefore, we recommend moving to "Device Manager" (on how to do this, you have already learned from fashion 2) and check all points for availability exclamation mark near equipment or inscription "Unknown device". When they are presented, it is worth updating the wrong drivers and set the missing. Useful information On this topic, read in our other articles on the links below.

Besides special attention should be paid to the program to those who do not want to do independent search and installation software. This software will do everything for you, ranging from system scanning and ending with the missing components.

Problems with video card work also provoke the appearance of the problem under consideration. Then it is necessary to separately search for the causes of malfunction and further correction. Do not forget to check for updates and establish them to need.

Read more:
Updating video card drivers /

Method 5: Changing the BIOS configuration (Award only)

We chose this way the latter, because not every user before faced with work in bIOS interface And some do not understand its device at all. Due to the differences in versions of BIOS, the parameters in them are often located in different menus and are even called differently. However, the input principle of the basic I / O system remains unchanged.

In modern motherboards With AMI BIOS and UEFI installed more a new version ACPI SUSPEND TYPE, which is not configured as described below. It does not arise with it when leaving the sleeping mode, so the owners of new computers this method Not suitable and relevant only for Award BIOS.

Being in Bios, you need to find a section called "POWER MANAGEMENT SETUP" or simply "POWER". This menu contains a parameter. "ACPI SUSPEND TYPE" And has several possible values \u200b\u200bresponsible for power saving mode. Value "S1" responsible for disabling the monitor and information drives when switching to sleep, and "S3" Disables everything except RAM. Select another value, and then save the changes to click on F10.. After that, check whether the computer now comes out of sleep.

Disable sleeping mode

The methods described above should help understand the fault that has arisen, but in isolated cases they do not bring the result, which may be associated with critical failures in the operation of the OS or poor assembly, when a non-license-free copy is used. If you do not want to reinstall Windows, simply disconnect the sleep mode to avoid further problems with him. Expanded Guide to this topic read in a separate material further.

Many users after a clean installation of the OS or update to the next edition found that Windows 10 does not leave the sleep mode and the computer does not turn off. This problem It occurs on devices of various brands. You can try to solve such a problem in several ways.

The first way to solve the problem: Using parameters

First and most simple way Solving the problem when Windows 10 does not go out of sleep mode or PC does not turn off, is to turn off the quick start function.

To do this, click "Start" and choose the "control panel". Go to the "Equipment and Sound" section. Click "Power supply". Next in the left menu, click "Action Power Button". In the section click on "Setting the Power Circuit"

A new window will open. Here you need to remove the mark with "Enable Quick Start".

IMPORTANT! After turning off this feature, the completion of the PC will be slowed down.

We solve the problem using MEI download

If you prefer the manufacturer of PC components intel companies, Sleeping or completion problem windows work 10 may be associated with driver Intel Management Engine Interface, or rather with his version.

Therefore, go to the site of the manufacturer, where by the https://downloadcenter.intel.com/search?keyword.intel.com/search?Keyword\u003dintel+Management +Engine presents a list of drivers. Select the system required in accordance with the discharge. Download the file and unpack it. Go to the address: Folder "Installers", "ME_SW_MSI", "Production" and launch the file "setupme.exe".

After installing the driver reboot PC. The problem will be solved.

Setting the Hibernation and Sleep Mode

If you encountered an error when the laptop does not go out of sleep mode in Windows 10 and the black screen glows constantly, it is worth making changes to sleep mode (hibernation can be exhibited). To do this, perform the following actions:

• Pull the laptop battery. Disconnect it from the network. Let's take a break for 5 minutes. Turn on.
• Click "Start", "Parameters", "System". In the menu on the left, select "Power and Sleep Mode".

• You can set the time later the laptop will switch to sleep mode. And if you click on the "Advanced Power Parameters" link, then sleep mode can be turned off at all by setting all components the value "No" when you go to sleep mode.

• The same settings can be found by going to the "Control Panel", "Power Supply" and selecting "Setting the Power Scheme", then "Change Additional Power Parameters".

• It is worth noting that if you turn off sleep mode, the laptop will work from the network until the battery sees.

Solve the problem if the black screen and the laptop does not come out of sleep

Even if sleep mode you are turned off, then in idle mode, the laptop screen becomes black. The laptop continues to work, hear noise from the fan and hard disk. To solve this problem, you should perform the following:

• Turn off the device by pressing the power button.
• After you re-turn on the laptop, it is worth clicking "Start" and in search string Enter the request "Screensaver". Select "Change the screensaver".

• A new window will open. Go to the parameters of the screensaver and completely turn it off.

It is important to note that often a black screen is associated with video card drivers. Therefore, if you encountered this problem, you should roll back or update the video device. First, we recommend that you roll back and only then update.

To do this, go to the "Device Manager" and choose the Videoparter branch. Click on the item right-click and select "Properties".

A new window will open. Select "roll back" or "update". If you are going to update the software, it is worth downloading drivers in advance from the manufacturer's official website. Otherwise, the system will install a universal driver.

IMPORTANT! If there are no compatible drivers with Windows 10, it is worth installing a working software (which previously worked on Windows 7 or 8) in compatibility mode.

Also can help solve the problem disabling the wake-up timer.

To do this, click on the right mouse button on the video adapter icon. Select "Properties". Go to the "Power Management" tab and remove the "Allow this device to output a PC from sleep mode".

Or you need to go to the "Control Panel", "Power", "Changing the Power Scheme Settings" and click the "Change Advanced Power Parameters" link. In the "Sleep" branch, we find a "awakening timer" and set it the value "disabled".