Menu
Is free
registration
home  /  Advice/ Connecting the Router to a Computer or Laptop via a Network Cable - Instructions for Dummies. How to set up TP-Link N Series router as an access point? Connecting tp link to computer

Connecting the Router to a Computer or Laptop via a Network Cable - Instruction for Dummies. How to set up TP-Link N Series router as an access point? Connecting tp link to computer

How to easily set up a purchased tp link wifi router? In addition to this device, you will need a computer.


and open any regularly used browser. Then we need to type in the IP address of our device. Typically, the numbers "192.168.0.1" are used here. The system will prompt the user to enter the correct username and password. Usually one simple word "admin" is used in such situations.


Setting up a new Wi-Fi router from the tp link brand will not be difficult even for a beginner. It is recommended to follow a simple algorithm.

So, you got to the main page, where the menu is located. In the upper left corner is the logo of the company that manufactured your equipment. In the upper right corner is short description model and maximum allowable Wi fi connection speed.

How to further configure a tp link wi-fi router? Use the "Quick Setup" function. For information on the possibilities for customizing the tp link brand, read the help section with right side screen (option "Help").

Fast connection option

Configuring the wireless mode of the tp link brand begins with determining the type of your connection (information is provided by your provider; in extreme cases, use the option to automatically detect your connection type).

On this stage it is necessary to fill in the information about future network... If your connection type is PPPoE, you will need to enter the required username and password you received from the provider, and then save the created parameters. This type of connection is most commonly used for Td series with ADSL option support.


If you have a dynamic IP address and a simpler TL series router, you will not need to enter your login and password. You just need to come up with a name and password for the new network. Then you will need to save the created parameters and reboot the router. The Wifi network will be completely ready for use.


Setting up a new wifi password is one of the possible options to secure your connection. In the special field when creating a new network, enter a combination of at least 8 and no more than 63 characters. Such a precaution will limit the circle of persons with access to the wifi network. If this option is unnecessary, use the "disable protection" option or leave the default settings unchanged.

How to set up a tp link wireless router

Using different models modems, the configuration principle will be approximately the same. The tl wr740n and tl wr841n versions are among the most popular today. The tl wr720n model is an inexpensive router for home use. If you are looking for a wireless router for gaming and watching videos, then the tl wr741nd is the perfect option for you.

The td w8901n router supports ADSL technology. It will not be difficult to connect it to your computer thanks to a special Settings Wizard translated into several languages. Other options for ADSL-enabled routers are the following models:

  • td w8951nd;
  • td w8151n;
  • td w8960n.

If you use the services of a Rostelecom provider, the general procedure for setting up should be the same. First we type standard IP address... Then we get to the main page of Rostelecom.

In some cases, the computer will need additional programs to use tp link routers. If the update does not occur automatically, then the necessary configuration utilities for creating a wireless connection for tp link technology are recommended to be downloaded from the official website of this company. Download only those versions that fit your model and the operating system of your computer.

Suitable for:

300Mbps Wireless N Routers, 150Mbps Wireless N Routers, 450Mbps Wireless N Routers, 750 N Series Dual Band Routers, 600 N Dual Band Routers.

This article is for the case when you already have one router and want to extend your coverage. wireless network through a second router connected to the first twisted pair. In this case, you do not need to use the WAN port on the second router.

Step 1

Connect LAN ports the first and second routers via twisted pair.

Step 2

Connect the computer with twisted pair cable to to another LAN port the second router and go to its web interface by navigating in your browser to the address indicated on the sticker on the bottom panel of the router. Please refer to the following article if necessary: ​​How to log into the web-based utility (management page) of TP-Link DSL Modem / Router?

Step 3

Go to the section Network-> Local network (Network -> LAN) in the menu on the left and change the IP address of the second router to be from the subnet of the primary router. For example, if the address of the primary router is 192.168.2.1, then the address of the second router must be in the range 192.168.2.2 - 192.168.2.254.

After that, a reboot is required. Click OK to reboot and access the web interface using the new IP address.

Step 4

Setting up a wireless network.

Go to the section Wireless mode-> Wireless Settings (Wireless -> Wireless Settings) and set the second router SSID(network name) and Channel... If your device is dual band, remember to select range broadcasting. Click on Save.

Go to the section Wireless -> Wireless Security and configure security for your wireless network. We recommend using WPA -PSK / AES encryption. PSK password This is the network key that you will use to connect to the wireless network and must be at least 8 characters long.

Step 5

Go to the section DHCP in the menu on the left, disconnect DHCP server and click Save.

Step 6

Go to the section and click the button.

After you complete these steps, computers connected to the LAN ports of the second router will have Internet access, and wireless devices will be able to connect to the wireless network with the name and password that you set (see the article for more details).

Requirements for use

Updated 04-06-2016 15:04:11 PM

This article is suitable for:

TL-WR54KIT, TL-WR841N, TL-WDR3500 more

TL-WR54KIT, TL-WR841N, TL-WDR3500, TL-WR743ND, TL-WR543G, TL-WR2543ND, Archer C50 (V1), TL-WDR4900, TL-MR3420, TL-WR941ND, TL-WR843N, TL-WR710N, TL-WDR4300, TL-R402M, TL-WR541G, TL-R860, TL-WR702N, TL-WR802N, TL-WR700N, TL-WR841HP, TL-WR340G, TL-WR1043ND, TL-WR1042ND, TL-WR300KIT, TL- WDR3600, TL-WR542G, TL-WR842N, TL-WR150KIT, Archer C20 (V1), TL-WR940N, Archer C7 (V1 V2 V3), Archer C20i, TL-WR741ND, TL-WR740N, TL-WR840N, TL-WR841 , TL-WR810N, TL-WR340GD, TL-WR720N, TL-WR843ND, TL-WR842ND, TL-MR3020, Archer C5 (V1.20), Archer C2 (V1), TL-R460, TL-MR3220, TL-MR3040

Note: this article will not work for you if your connection is made in the following ways:

  1. You have a cable / fiber optic modem. Internet access is carried out automatically without any settings. However, only one user can access the Internet.
  2. Before purchasing a TP-Link router, your ISP provided you with a static IP address. You need to manually register the IP address on your computer to access the Internet. In this case, refer to this manual.
  3. Your ADSL modem can provide Internet access for multiple devices. In this case, refer to this manual.

Additional preparation:

  1. Turn off the power to the router, modem, and computer.
  2. Connect your modem to the WAN port of your TP-Link router using an Ethernet cable, main computer connect to the LAN port of the router using an Ethernet cable.
  3. Turn on the power to the router in sequence, then to the modem and the computer.

Note: Please make sure you can access the Internet through a modem without using a TP-Link router. If direct connection does not work, contact your Internet provider.

Step 1. Enter the router's web-based utility.

If you are having trouble accessing the Web Utility, please refer to this guide.

Step 2. Configuring the WAN connection type.

After logging into the router's web-based utility, go to the " Network", Subsection" WAN". In line " Connection typeWAN»Select« PPPoE"As shown below. Then press the button " Save».

Step 3. Enter the data provided by your ISP

Enter the username and password provided by your provider.

Step 4. Save settings.

Step 5. Checking the connection.

Wait a few minutes and check the information on the page " State" In chapter " WAN". If the router receives any IP address (similar to the one shown in the image below), then this will mean that the connection between the router and the modem has been established.

Many readers ask me how to set up WiFi router TP-Link TL-WR841N. If you have a different model, then I want to note that this instruction for connecting the Internet and setting up WiFi is universal for any TP-Link modification, and not just TL WR841n. In addition, on our website you can find more detailed guides for , . I am sure they will definitely come in handy for you, because even if the wizard initially installed everything for you, then later, if you need to change something, for example, your network name or wifi password, you will have to configure the TP-Link WR841n yourself.

How to connect TP-Link TL WR841N to computer?

Let's get straight to practice. First of all, you need to connect an Internet cable from your provider to the TP-Link WR841n router. If earlier it was inserted directly into the computer's network connector, now the Internet will go to the router, and through it via WiFi to other devices. Therefore, we remove the wire from the network card on the back of the PC and insert it into the WAN port on the router. TP-Link TL-WR841N has one and for ease of perception it is highlighted from others in blue

Next, we take the Ethernet cable attached to it (it is also called twisted pair or patchcord) from the box and connect it with one end to any of the yellow LAN connectors, and the other into network card computer, where the cable from the provider was previously installed.

Setting up the Internet on TP-Link WR841n

For TP-Link settings TL-WR841N, you can use the included CD - it has a convenient step-by-step installer that will be just right for a beginner. However, since we decided to do it ourselves without a disk, we turn the router over and on its bottom we find information to enter the TP-Link router settings. In this case, we need to type the address "http://tplinkwifi.net" in the browser and enter the login / password admin / admin. You can also enter the WR841N admin panel by its standard IP address "192.168.0.1" or "192.168.1.1", depending on the model. About all possible problems I told you about the connection - read it if you can't open the login address.


Next, I will give two screenshots at once with examples of settings for different TP-Link routers - for the old and new firmware... The fact is that the admin panel has recently been updated and it can be difficult for a beginner to navigate the installation using the old pictures. Wherein old version the web interface is also very common, so it is impossible not to show it.

We select “WAN” in the “Network” section of the menu and make the basic parameters of connecting the TP-Link router to the Internet. To do this, you will need to set the connection type, login, password. Perhaps the data on the IP address, mask and gateway - all this should be spelled out in the contract for the provision of Internet services from your provider, or you can simply call its technical support and find out these data for configuration. As an example, I will give the most popular ones.

How to configure TP-Link WR841N router for Rostelecom and Dom.Ru - PPPoE

If your service provider is Rostelecom or Dom.Ru, then when setting up you need to select the PPPoE type. For him, you need to enter a username and password

TP-Link router configurations for Beeline - L2TP

For Beeline, you need to install L2TP and, in addition to the login and password, specify the hostname for the connection - tp.internet.beeline.ru

Dynamic and Static IP

There are two more varieties of the type of connection to the provider. With a dynamic address, you do not need to enter anything at all - just select this item and proceed to setting up wifi. If you are given a static IP to access the Internet, then the information that is spelled out in the contract will come in handy - ip, mask, gateway, but more on that later.

And in the next paragraph "Cloning the MAC address" you can use the computer address - in the networks of some providers, the use of one MAC address is still required, which was registered at the conclusion of the contract for the provision of services. As a result, if you start the router, the Internet simply will not work - this section is provided for this case.

Setting up a WiFi network on a TP-LINK TL-WR841N router

The next step in setting up your router is configuring your future wireless network. On TP-Link WR841N they are produced in the "Wireless Mode" menu group. Here you can set the channel for work, its width and mode, and also assign a name to the network. Set the network mode to "b, g, n" - it will allow you to distribute the Internet to the widest possible range of devices over your WiFi. The rest can be left at the default for the first time.

What if I can't enter TP-Link settings?

Sometimes it happens that you cannot enter the TP-Link settings. There can be two reasons:

  1. If you change the default IP address for logging into TP-Link router, which looks like 192.168.0.1, or username and password. To do this, you just need to hold down the "Reset" button for 10-15 seconds on the router plugged into the outlet.
  2. If incorrect parameters are entered for the network connection on the computer. To do this, go to the computer's cable connection settings in the "Network Control Center> Change adapter settings"

Depending on the modification operating system, the path that needs to be done to them will be different.

Windows 7


Windows 10

  1. On Windows 10, to get to this section of settings, you need to right-click on the "Start" icon and go to "Network Connections"

The router is inconspicuous, but one of critical devices for the modern internet user. With the monosyllabic function of providing wireless access to the network, the router is characterized by huge amount settings. Of these, the average user will be interested, however, only a few - those that ensure the connection of the device with the Internet and are responsible for wireless communication computers with a router. Let's consider them, as well as a number of other noteworthy router options using the popular TP-LINK TL-WR841N router as an example.

How to connect TP-LINK router to the Internet

The first task when setting up a router is connecting the device to the Internet. A router is an "intermediary" between the provider's server and the user's computer. Therefore, in order for the latter to be able to access the network, an “intermediary” must first of all be connected to it. To do this, follow these steps.

Step 1: Connecting to the control panel of the router

Setting up almost any router is done using the proprietary device control panel. It is accessed through a browser - the one you use on an ongoing basis.

First of all, you need to physically connect the router to your computer. There are 2 options for such a connection:

1. Wired

You can focus on it as the main one. With a wired connection, the likelihood of certain failures / freezes of the router configuration procedure is minimized.

To use the considered option for connecting the router to a PC:

  1. Turn on your router and computer.
  2. Take a twisted-pair cable, that is, one that has connectors at both ends.
  3. Insert one end of the cable into the Ethernet port on your computer and the other into the same port located on the back of the router (until it clicks lightly in both cases).
  4. Wait 1 minute.

2. Wireless

The option under consideration can be used if there is no twisted pair cable at hand or there is no Ethernet port on the PC (this happens on many "super thin" laptops or tablets, on which such a port is, in principle, very rare). But you need to make sure that there are no microwave ovens, radiotelephones, electrical panels, or other working routers in the room nearby the router. Everything specified devices are capable of interfering with the operation of Wi-Fi networks. If there is no reason to talk about their impact, then to connect to the router:

    1. Boot your PC, open the list of Wi-Fi networks available for connection, take a screenshot of them, or, if there are few networks, remember their list.

  1. Turn on the router, wait 3 minutes.
  2. Open the list of Wi-Fi networks again and compare it with the original one, "calculate" a new Wi-Fi network (most likely, its name will include the brand name TP-LINK).
  3. Connect to a new network.

As a rule, when using TP-LINK routers, you do not need to enter a password to log into the network in such cases.

If new network it was not possible to “calculate” in the list, then this most likely means that in the firmware specific model router, data transmission via Wi-Fi is disabled by default. We'll have to use the wired option to access the control panel of the router.

By connecting the PC to the router, you can enter the device control panel. For this:

  1. Open any browser, type in address bar: 192.168.0.1 and click Enter.

    If the specified address does not work (the browser will display the message "Page not found" or something similar to it), then you can try 192.168.1.1.

  2. On the loaded page, in the upper field, enter admin (this is the login to enter the control panel), below - also admin (this is the password). Click on Enter.

It is possible that the specified data for entering the control panel (address, login, password) for some reason will not work. This probably means that the previous user set non-standard router settings. You need to reset them to factory defaults.

To do this, you need to find the button on the router case "RESET".

Button "RESET" you need to press and hold for 1-2 seconds, which will require a sharp and durable object. After resetting the settings, you will need to wait - about 3 minutes until the router reboots. Then you need to try again to enter the control panel using the above data - it should work.

So, we are in the control panel of the router, which is controlled through the browser. With the help of the tools available in it, we will solve our main task: configuring the connection of the router to the Internet.

Step 2: Configuring the Router's Internet Connection

Before taking any action, you need to connect the router to the cable for communication with the Internet, which is laid by the provider. In the case of the router in question, this is an RJ-45 cable ( digital connection to the provider using Ethernet technology). Other routers can support fiber and ADSL connections.

    1. The tab is responsible for setting up the router's connection to the Internet. "Network"... It is the fourth from the top in the list of setting tabs on the left.

Let's agree that the considered menu items of the router control panel will be on English language- despite the fact that many varieties TP-LINK firmware characterized by the presence of control panel interfaces, which are translated into Russian. The use of English terms, firstly, will allow us to avoid possible discrepancies in the translation of certain menu items, and secondly, it will allow us to navigate, if necessary, in the control panels of other router models that are not Russified in terms of controls.

    1. Selecting a tab "Network", and then immediately go to the tab "WAN".
    2. In the tab "WAN" we are only interested in the only item - "WAN Connection Type"... This is a drop-down list of the types of internet connection supported by the router. Among them, you need to choose the one used by the provider. To find out the specific type of connection, you need to contact the provider.

    1. If you press the button "Detect" which is located to the right of the list "WAN Connection Type", then the router will try to automatically determine the type of connection and offer it to the user.


Note that when setting up a PPPoE connection (and others, which will be discussed below), you may need to specify not a dynamic IP address, but a static one - Static IP. It is provided by the provider for an additional fee (sometimes under a separate agreement) and, as a rule, is not in great demand from ordinary users.

Basically, a static IP address is ordered by organizations. For example, to ensure the security of data transmission during authorization in the bank-client system - when, within the framework of such authorization, a connection to a specific IP address is provided, which in this case cannot be assigned to someone else.

If the user has ordered a static IP address from the provider, then from the communication service provider you need to find out:

  • The exact value of this IP address ( "IP Address");
  • Subnet mask ( "Subnet Mask");
  • The main gateway ( "Gateway");

All this data is indicated in the window "WAN" if the option is activated "Static IP"... If PPPoE is used, then you only need to specify the first 2 parameters (in this case, it is assumed that the option "Static IP" in point "Secondary Connection").

3. L2TP and PPTP

If the provider works according to this communication standard, then:

  1. Select the appropriate item in the list "WAN Connection Type".
  2. Enter your username and password.
  3. Below - Dynamic IP, then - Connect Automatically.
  4. Push "Save".

In some cases, you need to specify the IP address set by the provider for the server (the item appears in the window "Server IP"). You also need to get it from your service provider.

For PPTP, the settings will be completely identical.

If the settings we have considered did not fit, then most likely you will have to call the support service of the communication service provider for additional advice.

After exhibiting desired settings by the type of connection and pressing "Save" we will move on to solving the next problem - setting up a Wi-Fi network.

Wi-Fi setup

Even if the user has done wireless connection with a router in order to set the Internet connection settings, the Wi-Fi network at that moment cannot be considered optimized for permanent use. It is necessary to "finalize" it, and in the case of a wired connection, configure it from scratch.

To do this, after pressing the button "Save" in the tab "WAN Connection Type" go to tab "Wireless".

Select item "Wireless Settings"... it basic settings wireless network. In him:

  1. Specify the name of the Wi-Fi network, or rename the proposed one (item SSID).
  2. Choose a country ( "Region"), the number of the Wi-Fi channel, or designate its automatic selection by the router ( "Channel", it is recommended "Auto").
  3. Select the wireless standard ( "Mode", working option - "11bgn mixed").
  4. Select channel width ( Channel Width, can choose "Automatic").
  5. Select the maximum baud rate ( "Max Tx Rate", can be at the maximum value).

It is also necessary to check the boxes (or make sure that they are already checked) in front of the items:

  • Enable Wireless Router Radio(that is, in fact, turn on Wi-Fi);
  • "Enable SSID Broadcast"(that is, activate the option to detect a Wi-Fi network by its name - SSID, user-installed in the previous step).
  • Push "Save".

Selecting an item "Wireless Security"... These are security settings for access to the Wi-Fi network from computers within the Wi-Fi range. In him:

  1. Check the box next to the option "WPA-PSK / WPA2-PSK".
  2. In the list by item "Version" select an option "WPA2-PSK", "Encryption" — "Automatic".
  3. In field "PSK Password" enter the password to enter the Wi-Fi network.
  4. V "Group Key Update Period" enter "3600".
  5. Click on "Save".

This set of settings provides reliable protection Wi-Fi networks from unauthorized connection to it. It is very important that network protection is based, one way or another, on the WPA2 standard (in combination with one or another data encryption algorithm - for example, PSK).

Restart the configured router: select "System Tools" > "Reboot" and click on the button "Reboot".

Rebooting your router will take about 3 minutes. After that, you can fully use it. On the computer, in the list of Wi-Fi networks, the one to which we have given a suitable name in the SSID field will appear. To enter it, you will need to enter the one we entered earlier in the field "PSK Password" password.

If New Password forgotten, then you will need:

  1. Log in to the Control Panel using the "wired" method.
  2. Select "Wireless", then "Wireless Security".
  3. Find line "PSK Password" and see the password.

If you examine the menu structure of the TP-LINK router control panel, you will find that there are dozens of other options. As a rule, ordinary users do not need to use them in one way or another. But among these options, you can single out some extremely useful, and therefore worthy of attention.

Configuring a TP-LINK router: other useful options

Indeed, the router has plenty of settings. Many of them are designed for experienced IT specialists, but, perhaps, most of them are understandable for an ordinary user who does not have special skills in the field of network administration. We can talk about options such as:

1. Protection of access to the control panel of the router

The username and password we know to enter the control panel of the router - admin and admin, are set in the router's firmware by default. It is advisable to change them to custom ones so that no other users have access to the settings of your router.

To change the factory login and password for entering the router control panel:

  1. Log in to the control panel using a standard username and password.
  2. Select a tab "System Tools", then - "Password".
  3. Enter admin in the field "Old User Name" and admin - in "Old Password".
  4. Enter your new username in the field "New User Name" and the new password is in "New Password".
  5. Confirm new password in the field "Confirm New Password".
  6. Click on "Save".

After we reboot the router in a known way ( "System Tools" > "Reboot", button "Reboot").

If you suddenly forget the password for entering the router, you will have to reset the device to factory settings by pressing "RESET" on the body of the device.

2. Restricting access to a Wi-Fi network from computers with a specific MAC address

MAC address is unique identificator a computer network card (in this case, a Wi-Fi card), which provides data transmission over the network. To change this address, you will need to replace the network card, which in some cases is almost impossible without losing the functionality of the computing device - for example, if it is a smartphone or tablet.

Therefore, if you restrict access to the Wi-Fi network by the MAC address of a computer known to the administrator, the user this computer will not be able to connect to the network via Wi-Fi. To put such a limitation:

    1. Open the tab "Wireless", then - "Wireless MAC Filtering".
    2. Click the button "Enable" opposite option "Wireless MAC Filtering".
    3. Select the option that starts with words "Allow the stations".
    4. Click on "Add New".

  1. On the page that opens, enter the MAC address of the device whose access you want to deny, enter any description of this device ( "Description"), select "Enable" in option "Status".
  2. Click on "Save".

After the banned computer appears in the list on the page "Wireless MAC Filtering".

If the tab "Wireless MAC Filtering" choose an option that starts with words "Deny the Stations", the opposite rule will be set. Computers with the listed MAC addresses will be the only ones from which it will be possible to access the Wi-Fi network. The rest will be denied access.

3. Limiting the speed of data transfer in a Wi-Fi network

This option is useful in cases when a large number of computers are supposed to be connected to the network at the same time. To set a speed limit for a specific computer connected to a Wi-Fi network (groups of computers):

    1. Please select Bandwidth Control > "Rules List".

  1. Click on "Add New" and in the window that opens, check the box "Enable".
  2. In field "IP Range" mark the interval of local IP-addresses for which the rate limitation is set (or specify the same IP-address twice - so that the limitation is set for a specific computer with such an IP-address).
  3. Set a limit on outgoing traffic ( "Egress Bandwidth") - minimum, maximum (in kilobits per second), the same - for incoming traffic ( Ingress Bandwidth).
  4. Click on "Save".

If you select the item "Control Settings" in the tab Bandwidth Control, then you can set a general traffic limit for the entire network.

Conclusion

Configuring most modern routers - including those belonging to the TP-LINK brand line, consists mainly in setting the correct settings in terms of connecting the router to the Internet and setting the necessary options in terms of protecting the Wi-Fi network. TP-LINK routers have a fairly convenient and logical interface that allows you to make settings network connections and Wi-Fi even for unprepared users. They also have a large number of useful options to optimize network performance.